CVD synthesis and radial deformations of large diameter single-walled CNTs

Single-walled carbon nanotubes (CNTs) were synthesized by a chemical vapor deposition (CVD) method on transmission electron microscopy (TEM) silica coated nickel grids using carbon monoxide as carbon source and iron nanoparticles as catalyst. The produced CNTs were as large as 11 nm in diameter. Investigations on the CNT deformations based on high-resolution TEM images showed that the deformation of CNTs due to their interaction with the substrate occurs at diameters larger than 2.7 nm. Small deformation of free standing tubes was found to occur at diameters above approximately 4.5 nm.     

Ultrasonic-assisted synthesis of Pd–Pt/carbon nanotubes nanocomposites for enhanced electro-oxidation of ethanol and methanol in alkaline medium

Herein, a facile ultrasonic-assisted strategy was proposed to fabricate the Pd–Pt alloy/multi-walled carbon nanotubes (Pd–Pt/CNTs) nanocomposites. A good number of Pd–Pt alloy nanoparticles with an average of 3.4 ± 0.5 nm were supported on sidewalls of CNTs with uniform distribution. The composition of the Pd–Pt/CNTs nanocomposites could also be easily controlled, which provided a possible approach for the preparation of other architectures with anticipated properties. The Pd–Pt/CNTs nanocomposites were extensively studied by electron microscopy, induced coupled plasma atomic emission spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and applied for the ethanol and methanol electro-oxidation reaction in alkaline medium. The electrochemical results indicated that the nanocomposites had better electrocatalytic activities and stabilities, showing promising applications for fuel cells.     

Carbon nanostructures synthesized by arc discharge between carbon and iron electrodes in liquid nitrogen

An idea of using pure iron and graphite electrodes was employed for synthesizing carbon nanoparticles by arc discharge in liquid nitrogen. The synthesized products consist of multiwalled carbon nanotubes (MW–CNT), carbon nanohorns (CNH), and carbon nanocapsules (CNC) with core–shell structure. Effect of metallic cathode and discharge current on product structure and yield had been experimentally investigated. Typical evidence of transmission electron microscopic images revealed that under some certain conditions of discharge in liquid nitrogen the synthesized products mainly consisted of CNCs with mean diameter of 50–400 nm. When conventional graphitic electrodes were employed, CNHs with some MW–CNTs were mainly synthesized. Meanwhile, MW–CNTs with diameter of 8–25 nm and length 150–250 nm became less selectively synthesized as cathode deposit under the condition of discharge in liquid nitrogen with higher arc current. The production yield of carbon nanoparticles synthesized by either carbon–carbon or carbon–iron electrodes became also lower with an increase in the arc current.     

Electrostatic self-assembly of Fe3O4 nanoparticles on carbon nanotubes

Carbon nanotubes (CNTs)-based magnetic nanocomposites can find numerous applications in nanotechnology, integrated functional system, and in medicine owing to their great potentialities. Herein, densely distributed magnetic Fe₃O₄ nanoparticles were successfully attached onto the convex surfaces of carbon nanotubes (CNTs) by an in situ polyol-medium solvothermal method via non-covalent functionalization of CNTs with cationic surfactant, cetyltrimethylammonium bromide (CTAB), and anionic polyelectrolyte, poly(sodium 4-styrenesulfonate) (PSS), through the polymer-wrapping technique, in which the negatively charged PSS-grafted CNTs can be used as primer for efficiently adsorption of positively metal ions on the basis of electrostatic attraction. X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analysis have been used to study the formation of Fe₃O₄/CNTs. The Fe₃O₄/CNTs nanocomposites were proved to be superparamagnetic with saturation magnetization of 43.5 emu g^?1. A mechanism scheme was proposed to illustrate the formation process of the magnetic nanocomposites.     

Remarkably enhanced photocatalytic activity by sulfur-doped titanium dioxide in nanohybrids with carbon nanotubes

TiO₂ doped S nanohybrids with carbon nanotubes (CNTs) were synthesized with CNTs, thiourea and TiO₂ nanoparticles. The result indicated that the TiO₂ nanoparticles with about 8 nm in size are attached on the sidewall of CNTs. The nanohybrids material can absorb at longer wavelength and the absorption even covers the whole range of visible region than that only TiO₂ nanoparticles. Application of the catalysts to photocatalytic degradation of methylene blue (MB) was tested under visible light irradiation. The result suggests that a high MB degradation activity of S-TiO₂/CNTs due to a reduce band gap of TiO₂ when S is doped, and the decrease in the possibility of electron–hole recombination by CNTs. In addition, the density functional-theory (DFT) calculations of the electronic band structures and density of states (DOS) to understand the bonding states between TiO₂ and CNTs, proved that the TiO₂/CNTs system is stable.     

Synthesis and characterization of graphenated carbon nanotubes on IONPs using acetylene by chemical vapor deposition method

The graphenated carbon nanotubes (G-CNTs) were synthesized on monodisperse spherical iron oxide nanoparticles (IONPs) using acetylene as carbon precursor by simple chemical vapor deposition method. The reaction parameters such as temperature and flow of carbon source were optimized in order to achieve G-CNTs with excellent quality and quantity. Transmission electron microscopy (TEM) clearly illustrated that the graphene flakes are forming along the whole length on CNTs. The degree of graphitization was revealed by X-ray diffraction (XRD) analysis and Raman spectroscopic techniques. The intensity of D to G value was less than one which confirms the obtained G-CNTs have high degree of graphitization. The optimum reaction temperature for the IONPs to form metallic clusters which in turn lead to the formation of G-CNTs with high carbon deposition yield is at 900 °C. The TEM shows the CNTs diameter is 50 nm with foiled graphene flakes of diameter around 70 nm. Our results advocate for IONPs as a promising catalytic template for quantitative and qualitative productivity of nanohybrid G-CNTs. The produced G-CNTs with high degree of graphitization might be an ideal candidate for nanoelectronic application like super capacitors and so on.     

Sonochemical modification of carbon nanotubes for enhanced nanocomposite performance

Multi-walled carbon nanotubes (CNTs) have been treated using 20 kHz ultrasound in combination with dilute nitric and sulfuric acids at much lower concentrations than previously reported. The measurements revealed an optimum set of sonication conditions (in this case 30 min at 12 W cm⁻²) exists to overcome aggregation of the nanotubes and to allow efficient dispersion in ethanol or in chitosan. Transmission electron microscopy and Raman spectroscopy suggested the removal of amorphous material and reduction of the CNT diameter as well as modifications to their defect structures. The surface oxidation was determined by FTIR spectroscopy. At longer times or higher ultrasound intensities, degradation such as nanotube shortening and additional defect generation in the graphitic network occurred and the benefits of using ultrasound decreased. The modified CNTs were used as fillers for chitosan films and gave a tenfold increase in tensile strength and integrity of the films. The methodology was combined with sonochemical generation of gold or iron oxide nanoparticles to produce a range of functional membranes for catalytic reductive hydrogenation or dye degradation under conditions that are more environmentally benign than those previously used. Our results further add to the usefulness of sonochemistry as a valuable tool in preparative materials chemistry but also illustrate the crucial importance of careful control over the experimental conditions if optimum results are to be obtained.     

Synthesis of carbon nanotubes via Fe-catalyzed pyrolysis of phenolic resin

Carbon nanotubes (CNTs) with 40–100 nm in diameter and tens of micrometers in length were prepared via catalytic pyrolysis of phenol resin in Ar at 673–1273 K using ferric nitrate as a catalyst precursor. Structure and morphology of pyrolyzed resin were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Ferric nitrate was transformed to Fe₃O₄ at 673 K, and to metallic Fe and Fe_xC carbide at 873–1273 K. The optimal weight ratio of Fe catalyst to phenol resin for growing CNTs was 1.00 wt%, and the optimal temperature was 1073 K. In addition, use of a high pressure increased the yield of CNTs. Density functional theory (DFT) calculations suggest that Fe catalysts facilitate the CNTs growth by increasing the bond length and weakening the bond strength in C₂H₄ via donating electrons to the C atoms in it.     

Development of cholesterol biosensor with high sensitivity using dual-enzyme immobilization into the mesoporous silica materials

Mesoporous silica (MPS) materials with different pore diameters were synthesized by a sol–gel method where organic templates such as cationic surfactant (cetyltrimethylammonium bromide) and triblock co-polymer of (poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (Pluronic P123, EO₂₀PO₇₀EO₂₀)), were used. MPS surface was organo-functionalized using a silane coupling reagent (ethyl-, phenyl-, or 3-mercaptpropyltriethoxysilane). Dual-enzyme, cholesterol esterase (10.0 nm × 5.4 nm × 11.0 nm) and cholesterol oxidase (6.8 nm × 8.5 nm × 8.8 nm), was immobilized on MPS materials by physical adsorption. Amount of dual-enzyme immobilized on all MPS materials, having a different pore size (2.7, 6.4, 12.4, 14.7, and 22.6 nm), and organo-functionalized MPS was similar (CE: 1.5 mg/mg silica and CO: 0.01 mg/mg silica). High activity of dual-enzyme was obtained by adjacently immobilizing on MPS materials. Its activity on MPS-2 (pore diameter: 6.4 nm) or MPS-5 (pore diameter: 22.6 nm) showed approximately 60% of native activity. Moreover, dual-enzyme immobilized on MPS with highly hydrophobic organo-functional groups (phenyl- or mercaptopropyl-group) exhibited higher activity than that on no-substituted MPS. Relative activity of dual-enzyme immobilized on organo-functionalized MPS-2 increased from 58% to 93%, under the optimum conditions.     

Sonosynthesis of gold nanoparticles from a geranium leaf extract

A rapid in situ biosynthesis of gold nanoparticles (AuNPs) is proposed in which a geranium (Pelargonium zonale) leaf extract was used as a non-toxic reducing and stabilizing agent in a sonocatalysis process based on high-power ultrasound. The synthesis process took only 3.5 min in aqueous solution under ambient conditions. The stability of the nanoparticles was studied by UV–Vis absorption spectroscopy with reference to the surface plasmon resonance (SPR) band. AuNPs have an average lifetime of about 8 weeks at 4 °C in the absence of light. The morphology and crystalline phase of the gold nanoparticles were characterized by transmission electron microscopy (TEM). The composition of the nanoparticles was evaluated by electron diffraction and X-ray energy dispersive spectroscopy (EDS). A total of 80% of the gold nanoparticles obtained in this way have a diameter in the range 8–20 nm, with an average size of 12 ± 3 nm. Fourier transform infrared spectroscopy (FTIR) indicated the presence of biomolecules that could be responsible for reducing and capping the biosynthesized gold nanoparticles. A hypothesis concerning the type of organic molecules involved in this process is also given. Experimental design linked to the simplex method was used to optimize the experimental conditions for this green synthesis route. To the best of our knowledge, this is the first time that a high-power ultrasound-based sonocatalytic process and experimental design coupled to a simplex optimization process has been used in the biosynthesis of AuNPs.     

Preparation of magnetic FeCo nanoparticles by coprecipitation route

Magnetic FeCo nanoparticles with high saturation magnetization (M_s = 148 emu/g) at 15 kOe were prepared by a coprecipitation route. The value of M_s for FeCo nanoparticles depends on the ratio of Fe to Co components. The size of the nanoparticles was confirmed by transmission electron microscopy (TEM) images, and morphology of the nanoparticles was obtained by field emission scanning electron microscopy (FE-SEM) images. The crystal structure of the nanoparticles dependent on annealing was characterized by X-ray diffraction data. The magnetic properties were characterized by saturation magnetization from a hysteresis loop by VSM.     

Combined of ultrasound irradiation with high hydrostatic pressure (US/HHP) as a new method to improve immobilization of dextranase onto alginate gel

In this research work, dextranase was immobilized onto calcium alginate beads by the combination of ultrasonic irradiation and high hydrostatic pressure (US/HHP) treatments. Effects of US/HHP treatments on loading efficiency and immobilization yield of dextranase enzyme onto calcium alginate beads were investigated. Furthermore, the activities of immobilized enzymes prepared with and without US/HHP treatments and that prepared with ultrasonic irradiation (US) and high hydrostatic pressure (HHP), as a function of pH, temperature, recyclability and enzyme kinetic parameters, were compared with that for free enzyme. The maximum loading efficiency and the immobilization yield were observed when the immobilized dextranase was prepared with US (40 W at 25 kHz for 15 min) combined with HHP (400 MPa for 15 min), under which the loading efficiency and the immobilization yield increased by 88.92% and 80.86%, respectively, compared to immobilized enzymes prepared without US/HHP treatment. On the other hand, immobilized enzyme prepared with US/HHP treatment showed V_max, K_M, catalytic and specificity constants values higher than that for the immobilized enzyme prepared with HHP treatment, indicated that, this new US/HHP method improved the catalytic kinetics activity of immobilized dextranase at all the reaction conditions studied. Compared to immobilized enzyme prepared either with US or HHP, the immobilized enzymes prepared with US/HHP method exhibited a higher: pH optimum, optimal reaction temperature, thermal stability and recyclability, and lower activation energy, which, illustrating the effectiveness of the US/HHP method. These results indicated that, the combination of US and HHP treatments could be an effective method for improving the immobilization of enzymes in polymers.     

Preferred orientation of ZnO nanoparticles formed by post-thermal annealing zinc implanted silica

High quality zinc oxide nanoparticles with (002) preferred orientation were prepared by post-thermal annealing zinc implanted silica at 700 °C using two methods. One method was annealing zinc implanted silica at 700 °C for 2 h in oxygen ambient; the other method was sequentially annealing zinc implanted silica at 700 °C in nitrogen and oxygen ambient for 1 h, respectively. X-ray diffraction (XRD), absorption and microphotoluminescence (micro-PL) results indicated that the latter method could create high quality ZnO nanoparticles with (002) preferred orientation and narrow size-distribution. X-ray photoelectron spectra (XPS) showed the formation of ZnO nanoparticles on a silica surface, where the ZnO nanoparticle content increased with increasing oxidation time in an oxygen environment. The processes of the transformation from Zn to ZnO are discussed.     

Reductive dechlorination of 2,4-dichlorophenol by Pd/Fe nanoparticles prepared in the presence of ultrasonic irradiation

Palladium/Iron (Pd/Fe) nanoparticles were prepared by using ultrasound strengthened liquid phase reductive method to enhance dispersion and avoid agglomeration. The dechlorination of 2,4-dichlorophenol (2,4-DCP) by Pd/Fe nanoparticles was investigated to understand its feasibility for an in situ remediation of contaminated groundwater. Results showed that 2,4-DCP was first adsorbed by Pd/Fe nanoparticles, then quickly reduced to o-chlorophenol (o-CP), p-chlorophenol (p-CP), and finally to phenol (P). The induction of ultrasound during the preparation of Pd/Fe nanoparticles further enhanced the removal efficiency of 2,4-DCP, as a result, the phenol production rates increased from 65% (in the absence of ultrasonic irradiation) to 91% (in the presence of ultrasonic irradiation) within 2 h. Our data suggested that the dechlorination rate was dependent on various factors including Pd loading percentage over Fe⁰, Pd/Fe nanoparticles availability, temperature, mechanical stirring speed, and initial pH values. Up to 99.2% of 2,4-DCP was removed after 300 min reaction with these conditions: Pd loading percentage over Fe⁰ 0.3 wt.%, initial 2,4-DCP concentration 20 mg L^?1, Pd/Fe dosage 3 g L^?1, initial pH value 3.0, and reaction temperature 25 °C. The degradation of 2,4-DCP followed pseudo-first-order kinetics reaction and the apparent pseudo-first-order kinetics constant was 0.0468 min^?1.     

Preparation of enzyme nanoparticles and studying the catalytic activity of the immobilized nanoparticles on polyethylene films

Using high-intensity ultrasound, in situ generated α-amylase nanoparticles (NPs) were immobilized on polyethylene (PE) films. The α-amylase NP-coated PE films have been characterized by E-SEM, FTIR, DLS, XPS and RBS. The PE was reacted with HNO₃ and NPs of the α-amylase were also deposited on the activated PE. The PE impregnated with α-amylase (4 μg per 1 mg PE) was used for hydrolyzing soluble potato starch to maltose. The immobilization improved the catalytic activity of α-amylase at all the reaction conditions studied. The kinetic parameters, K_m (5 and 4 g L^?1 for the regular and activated PE, respectively) and V_max (5 × 10^?7 mol ml^?1 min^?1, almost the same numbers were obtained for the regular and activated PEs) for the immobilized amylase were found to slightly favor the respective values obtained for the free enzyme (K_m = 6.6 g L^?1, V_max = 3.7 × 10^?7 mol ml^?1 min^?1). The enzyme remained bound to PE even after soaking the PE in a starch solution for 72 h and was still found to be weakly active.     

Sonochemical fabrication of edible fragrant antimicrobial nano coating on textiles and polypropylene cups

We report on a simple and effective ultrasound-assisted deposition of vanillin nanoparticles (∼50 nm in size), raspberry ketone (RK) nanoparticles (∼40 nm in size) and camphor nanoparticles (width ∼30 nm, length ∼40 nm in size) on textiles and on polypropylene surfaces. The excellent antibacterial and antifungal activity of the fragrant coatings on cotton bandages, and polypropylene surface against Escherichia coli (E. coli), Salmonella paratyphi A (S. paratyphi A) and the yeast Candida albicans (C. albicans) cultures was demonstrated. It is worth pointing out that these fragrant materials are edible, making them very useful for packaging. The mechanism of the edible fragrant coating formation and adhesion to the textile was discussed, and finally an up-scaling of the sonochemical process for textile coating was carried out.     

Ultrasonic-assisted degradation of phenazopyridine with a combination of Sm-doped ZnO nanoparticles and inorganic oxidants

Pure and samarium doped ZnO nanoparticles were synthesized by a sonochemical method and characterized by TEM, SEM, EDX, XRD, Pl, and DRS techniques. The average crystallite size of pure and Sm-doped ZnO nanoparticles was about 20 nm. The sonocatalytic activity of pure and Sm-doped ZnO nanoparticles was considered toward degradation of phenazopyridine as a model organic contaminant. The Sm-doped ZnO nanoparticles with Sm concentration of 0.4 mol% indicated a higher sonocatalytic activity (59%) than the pure ZnO (51%) and other Sm-doped ZnO nanoparticles. It was believed that Sm³⁺ ion with optimal concentration (0.4 mol%) can act as superficial trapping for electrons in the conduction band of ZnO and delayed the recombination of charge carriers. The influence of the nature and concentration of various oxidants, including periodate, hydrogen peroxide, peroxymonosulfate, and peroxydisulfate on the sonocatalytic activity of Sm-doped ZnO nanoparticles was studied. The influence of the oxidants concentration (0.2–1.4 g L⁻¹) on the degradation rate was established by the 3D response surface and the 2D contour plots. The results demonstrated that the utilizing of oxidants in combination with Sm-doped ZnO resulting in rapid removal of contaminant, which can be referable to a dual role of oxidants; (i) scavenging the generated electrons in the conduction band of ZnO and (ii) creating highly reactive radical species under ultrasonic irradiation. It was found that the Sm-doped ZnO and periodate combination is the most efficient catalytic system under ultrasonic irradiation.     

Rapid preparation and characterization of chitosan nanoparticles for oligonucleotide

Chitosan is regarded as one of the potential candidates as a gene carrier. However, the poor solubility of chitosan is the major limiting factor in its utilization as a gene carrier. The purpose of this study was to simplify the method of preparing the nanoparticles of chitosan linked with antisense oligonucleotide (asON). The main step was preparing the derivatives of chitosan phosphate (CSP) in order to easily dissolve in aqueous solution. The nanoparticles were formed using a simple mixed method for CSP and asON, and the nanoparticle’s forming condition was optimized so that the nanoparticle’s characterization could be examined. Results showed that it was simple to make the nanoparticles under the optimal condition of 2:1 M proportion of CSP and asON. The size of the nanoparticles was 102.6 ± 12.0 nm, its zeta potential was 1.45 ± 1.75, and the encapsulated ratio of the chitosan crosslinked the asON was 87.6 ± 3.5%. The infrared spectra and electron microscope displayed that chitosan may combine with the asON to form equirotal nanoparticles. In conclusion, it was simple and feasible to form chitosan nanoparticles for asON using the CSP, and the CSP can efficiently encapsulate asON.     

Preserving long-term emission stability of carbon nanotube field emitter using aluminum layer

Carbon nanotube (CNT) field emitter was fabricated, and then its emission stability was evaluated with three different anode structures; indium tin oxide (ITO)/glass, ZnS:Cu,Al(green phosphor)/ITO/glass, and Al/ZnS:Cu,Al/ITO/glass. It was found that the electron emission from CNTs to the phosphor layer degrades much faster than the emission to ITO layer does. The current decay time from 100 μA/cm² to 50 μA/cm² for ITO/glass and ZnS:Cu,Al/ITO/glass were 250 h and 20 h, respectively. Such rapid decay in emission current with the phosphor-coated anode was found to be attributed to the formation of Zn particles on CNTs during the field emission. However, the deposition of aluminum layer on the phosphor, in other words, using the anode structure of Al/ZnS:Cu,Al/ITO/glass recovered the stability that is comparable to that with an ITO/glass. The aluminum layer was found to efficiently prevent phosphor elements from being degassed, preserving the long-term emission stability of carbon nanotubes.     

Ultrasonic assisted dispersive solid-phase microextraction of Eriochrome Cyanine R from water sample on ultrasonically synthesized lead (II) dioxide nanoparticles loaded on activated carbon: Experimental design methodology

The present research focus on designing an appropriate dispersive solid-phase microextraction (UA-DSPME) for preconcentration and determination of Eriochrome Cyanine R (ECR) in aqueous solutions with aid of sonication using lead (II) dioxide nanoparticles loaded on activated carbon (PbO-NPs-AC). This material was fully identified with XRD and SEM. Influence of pH, amounts of sorbent, type and volume of eluent, and sonication time on response properties were investigated and optimized by central composite design (CCD) combined with surface response methodology using STATISTICA. Among different solvents, dimethyl sulfoxide (DMSO) was selected as an efficient eluent, which its combination by present nanoparticles and application of ultrasound waves led to enhancement in mass transfer. The predicted maximum extraction (100%) under the optimum conditions of the process variables viz. pH 4.5, eluent 200 μL, adsorbent dosage 2.5 mg and 5 min sonication was close to the experimental value (99.50%). at optimum conditions some experimental features like wide 5–2000 ng mL⁻¹ ECR, low detection limit (0.43 ng mL⁻¹, S/N = 3:1) and good repeatability and reproducibility (relative standard deviation, <5.5%, n = 12) indicate versatility in successful applicability of present method for real sample analysis. Investigation of accuracy by spiking known concentration of ECR over 200–600 ng mL⁻¹ gave mean recoveries from 94.850% to 101.42% under optimal conditions. The procedure was also applied for the pre-concentration and subsequent determination of ECR in tap and waste waters.