BiVO4空心微球的合成及其光催化降解亚甲基蓝的性能研究

以BiNO₃·5H₂O和NH₄VO₃为原料,柠檬酸为络合剂,成功合成了BiVO₄空心纳米球．采用TEM、XRD、UV-Vis等测试技术对样品的形貌、相结构以及光吸收性能等进行了表征．结果表明,所制备的BiVO₄空心微球在紫外区和可见区均有较强的光吸收,空心球平均粒径为160 nm,空腔直径为10～80 nm．以亚甲基蓝染料溶液的脱色降解实验为模型反应研究了样品的光催化性能．光催化实验结果表明,在可见光照射下,反应150 min后,样品对亚甲基蓝溶液的脱色率可达到95%以上．此外,考察了柠檬酸添加量对空心球形貌的影响,并提出了BiVO₄空心纳米球的可能形成机理．     

Synthesis and characterization of Ag/BiVO4 composite photocatalyst

Ag/BiVO₄ composite photocatalysts were hydrothermal synthesized and characterized by XRD, SEM, XPS and DRS techniques. Their photocatalytic activities were determined by oxidative decomposition of methyl orange in aqueous solution under visible light irradiation. It revealed that the doped Ag species greatly improved the visible light absorption abilities and morphologies of the composites, and thus lead to enhanced photocatalytic activities compared with that of the pure BiVO₄.     

Photoelectrochemical properties of FTO/m-BiVO4 electrode in different electrolytes solutions under visible light irradiation

Photoelectrochemical properties of FTO/BiVO₄ electrode were investigated in different electrolytic solutions, potassium chloride (KCl) and sodium sulphate (Na₂SO₄), and under visible light irradiation condition. In order to accomplish that, an FTO/BiVO₄ electrode was built by combining the solution combustion synthesis technique with the dip-coating deposition process. The morphology and structure of the BiVO₄ electrode were investigated through X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photoelectrochemical properties were analyzed through chronoamperometry measurements. Results have shown that the FTO/BiVO₄ electrode presents higher electroactivity in the electrolyte Na₂SO₄, leading to better current stabilization, response time, and photoinduced current density, when compared to KCl electrolyte. Besides, this electrode shows excellent performance for methylene blue degradation under visible light irradiation condition. In Na₂SO₄, the electrode has shown higher degradation rate, 51 %, in contrast to 44 % in KCl, plus higher rate constant, 174?×?10^?4 min^?1 compared to 150?×?10^?4 min^?1 in KCl. Results presented in this communication leads to the indication of BiVO₄ thin films as alternate materials to use in heterogeneous photoelectrocatalysis, more specifically in decontamination of surface water.     

Synthesis of fluorinated TiO2 hollow microspheres and their photocatalytic activity under visible light

Fluorinated TiO₂ hollow microspheres with three-dimensional hierarchical architecture were prepared by solvothermally treatment using solid microspheres as precursor. The obtained solid and hollow TiO₂ microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activity of as-prepared solid and hollow TiO₂ microspheres was determined by degradation of methyl orange (MO) under visible light irradiation. The results showed that the surface fluorination, the existence of accessible mesopores channels, and the increased light harvesting abilities could remarkably improve the photocatalytic activity of TiO₂ hollow microspheres.     

铈和磷钨酸共掺杂纳米二氧化钛中空纤维的制备及其光催化活性

以棉花纤维为模板,以钛酸四正丁酯、硝酸铈铵和磷钨酸为原料采用模板法制备了一系列铈和磷钨酸共掺杂的、具有中空纤维结构的TiO₂光催化材料, 利用扫描电子显微镜、X射线衍射、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征. 以苯酚溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能. 结果表明,用模板法制备的TiO₂纤维材料具有中空结构,共掺杂的TiO₂纤维在紫外和可见光条件下较纯TiO₂纤维和单掺杂TiO₂纤维对苯酚溶液具有更好的光催化降解效果, 且铈和磷钨酸的掺杂量显著影响该纤维材料的催化性能;当铈掺杂量为0.3mol%和磷钨酸掺杂量为2mol%,在500 oC焙烧2 h所得中空纤维材料的催化性能最佳,4 h即可使苯酚溶液的降解率达98.5%;重复使用4次仍可使苯酚溶液的降解率保持在87%以上,且该催化剂材料易于离心分离去除.     

Rapid microwave-assisted synthesis of phase controlled BiVO<Subscript>4</Subscript> nanocrystals and research on photocatalytic properties under visible light irradiation

Pure tetragonal and monoclinic phases BiVO₄ were prepared from aqueous Bi (NO₃)₃ and NaVO₃ solutions by a rapid microwave-assisted method that employed accurate controlling of microwave irradiation time and power. The highly crystalline phase converted irreversibly from tetragonal to monoclinic BiVO₄ with gradually elongated irradiation time gradually, which is further proved by X-ray diffraction, UV–vis and Raman measurements. These variations of phase structures led to different photocatalytic properties under visible light.     

Sonochemical preparation and characterization of photochromic MoO3 nanoparticles

The effect of ultrasound irradiation on molybdenum trioxide has been investigated. Under ultrasonic irradiation, spherical-like MoO₃ nanoparticles were obtained, while bulk-like MoO₃ nanoparticles were prepared without ultrasonic irradiation. The changes in the physicochemical properties of MoO₃ have been investigated using techniques such as X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet and visible spectroscopy (UV-vis). The physicochemical changes of MoO₃ due to ultrasound irradiation have been attributed to the sonochemical cavity collapse onto the molybdenum trioxide particles. The ultrasonically prepared particles can also greatly improve the photochromism efficiency.      

Efficient photocatalytic degradation of acid orange 7 on metal oxide p–n junction composites under visible light

MO(=CuO, Co₃O₄, NiO)/BiVO₄ p–n junction composites were synthesized by urea-precipitation and wet impregnation method. The physicochemical and optical properties of the as-prepared materials were investigated by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–visible diffuse reflectance spectra. The photocatalytic performance of the as-prepared materials was investigated for decomposition of azo dye, acid orange 7. The CuO/BiVO₄ and Co₃O₄/BiVO₄ p–n junction composite photocatalysts exhibited the higher photocatalytic degradation of acid orange 7 than those of BiVO₄ and NiO/BiVO₄ as-prepared samples under visible light irradiation. We also discussed the mechanism of enhanced photocatalytic activity of p–n junctioned composites based on their energy band structures.     

Ti<Superscript>3+</Superscript>-doped TiO<Subscript>2</Subscript> hollow sphere with mixed phases of anatase and rutile prepared by dual-frequency atmospheric pressure plasma jet

A novel method of synthesizing Ti³⁺-doped TiO₂ was proposed. Ti³⁺-doped TiO₂ hollow spheres were prepared with different thickness of carbon shell by using atmospheric pressure plasma jet generated by dual-frequency power sources. The as-synthesized Ti³⁺-doped TiO₂ hollow microspheres were characterized by X-ray diffraction (XRD) pattern, scanning electron microscope (SEM) images, high-resolution transmission electron microscopy (HRTEM) images, Raman spectra, X-ray photoelectron spectroscopy (XPS), and UV–vis spectra. These results indicated that these samples had mixed phases of anatase and rutile and the structure of hollow sphere varied with different thickness of carbon shell. The Ti-O-C chemical bond was the connection between the TiO₂ hollow sphere and carbon layer. Amount of Ti³⁺ ions were found, which were accompanied with the formation of oxygen vacancies. Meantime, the as-synthesized catalysts also display strong absorption in the visible light region and have a narrow band energy gap. Optical emission spectroscopy (OES) was used to observe different excited species in the discharge area. These results showed that the oxygen content had a significant impact on the number of oxygen vacancies. Finally, the photocatalytic activities of as-prepared samples were evaluated by decomposition of rhodamine B aqueous solution, which showed better photocatalytic activity under UV–vis light irradiation.     

One-pot synthesis of Ag+ doped BiVO4 microspheres with enhanced photocatalytic activity via a facile hydrothermal method

The Ag⁺/BiVO₄ photocatalyst was fabricated through a facile hydrothermal method by using K₆V₁₀O₂₈·9H₂O as the vanadium source. The impact of Ag⁺ on the product's structure and morphology was studied. It was shown that the amount of Ag⁺ has no effect on the product’s crystal phases but plays an important role on the morphology of the nanoparticles that construct the shell of BiVO₄ microspheres. In addition, the Ag⁺-doped photocatalysts have much higher photocatalytic activities in removing RhB and MB under the UV light illumination than the pure BiVO₄. A possible photocatalytic mechanism was proposed in photoexcitation of the BiVO₄ electrons which subsequently captured by the dopant. The present work may offer a novel route to reach higher photocatalytic activity by doping the Ag⁺ in the semiconductor catalysts.     

A New Insight of the Photothermal Effect on the Highly Efficient Visible‐Light‐Driven Photocatalytic Performance of Novel‐Designed TiO2 Rambutan‐Like Microspheres Decorated by Au Nanorods

Photocatalyst‐assisted degradation of organic pollutants, which exhibits a novel strategy for solar‐energy utilization, possesses enormous potential in various applications. Extending the light‐absorption range in the spectrum of sunlight and improving light‐conversion efficiency are always primary issues to enhance the catalytic performance of these photocatalysts. Herein, a new structure of gold‐nanorod‐decorated TiO₂ rambutan‐like microspheres is designed, which exhibits superior photocatalytic ability toward Rhodamine B in the range of visible light due to the 3D distribution of the TiO₂ branches on the surface of the microspheres, which prompts the multireflection of photons. The absorption rate of photons is thereby tremendously enhanced. This is beneficial for the generation of hot electrons originating from the localized surface plasmonic resonance of Au nanorods, which can be used to both initiate the reaction and produce the photothermal effect. Hot electrons generated by a single Au nanorod in microspheres to initiate the degradation reaction can be as high as 2.5 times of those in the nanowires' counterpart. Moreover, the heating power of a single Au nanorod in microspheres reaches up to 4.4 times higher than that in nanowires, which further accelerates the degradation rate. The reaction pathway of visible‐light‐assisted RhB degradation catalyzed by Au/TiO₂ microspheres goes through an initial N‐deethylation process instead of the complete cycloreversion catalyzed by pure TiO₂ microspheres under UV irradiation. This strategy of structure design for improved photon absorption, which achieves high degradation rate and photothermal effect, is promising for the development of novel photocatalysts.     

Graphene-based hollow TiO2 composites with enhanced photocatalytic activity for removal of pollutants

Catalytically active graphene-based hollow TiO₂ composites(TiO₂/RGO) were successfully synthesized via the solvothermal method. Hollow TiO₂ microspheres are uniformly dispersed on RGO. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (DRS) and photoluminescence (PL) were used for the characterization of prepared photocatalysts. The mass of GO was optimized in the photocatalytic removal of rhodamine B (RhB) as a model dye pollutants. The results showed that graphene-based hollow TiO₂ composites exhibit a significantly enhanced photocatalytic activity in degradation of RhB under either UV or visible light irradiation. The formation of the graphene-based hollow TiO₂ composites and the photocatalytic mechanisms under UV and visible light were also discussed.     

Preparation and efficient visible light-induced photocatalytic activity of m-BiVO4 with different morphologies

The monoclinic scheelite BiVO₄ crystals with peanut-like, oval, twin-quadrangle and twin-four-pointed star morphologies were synthesized via a facile one step hydrothermal method by using sodium citrate as the chelating agent. The X-ray diffraction and scanning electron microscopy were employed to elucidate the structures and mophologies of the as-prepared BiVO₄ samples. The results showed that the formation of m-BiVO₄ with different morphologies relied on the pH value of the precursor solution. The band gaps values (E_g) of all the BiVO₄ samples were around 2.37–2.45 eV according to the UV–vis diffuse reflectance spectrum, which indicated that samples could strongly absorb in the visible light region. The photocatalytic activities of BiVO₄ crystals were evaluated by degradation of MB in aqueous solution under artificial solar-light. The BiVO₄ samples obtained at different pH values showed different photocatalytic activities during the sunlight-driven photodegradation of methylene blue (MB). The sample with peanut-like-shape prepared at pH=1 exhibited the highest activity, and the photocatalytic conversion could reach above 90% after 3 h of irradiation. The result suggested that m-BiVO₄ with peanut-like-shape could be used as an effective photocatalyst in practical application for organic pollutants degradation.     

Enhanced visible-light-driven photocatalytic performance for degradation of organic contaminants using PbWO4 nanostructure fabricated by a new,simple and green sonochemical approach

Water contamination has turned into a critical global concern that menaces the entire biosphere and has a notable effect on the lives of living beings and humans. As a proper and environmentally friendly solution, visible-light photocatalysis technology has been offered for water contamination removal. There is a strong interest in the design of the efficient catalytic materials that are photoactive with the aid of visible light. Herein, to fabricate a highly efficient photocatalyst for removal of organic pollution in water, a facile and swift sonochemical route employed for creation of the spindle shaped PbWO₄ nanostructure with the aid of an environmentally friendly capping agent (maltose) for the first time. To optimize the efficiency, dimension and structure of lead tungstate, various effective factors such as time, dose of precursors, power of ultrasound waves and kind of capping agents were altered. The attributes of PbWO₄ samples were examined with the aid of diverse identification techniques. The produced lead tungstate samples in role of visible-light photocatalyst were applied to remove organic pollution in water. The kinds of pollutants, dose and type of catalyst were examined as notable factors in the capability to eliminate contaminants. Very favorable catalytic yield and durability were demonstrated by spindle-shaped PbWO₄ nanostructure (produced at power of 60 W for 10 min and with usage of maltose). Usage of ultrasonic irradiation could bring to improvement of catalytic yield of PbWO₄ to 93%. Overall, the outcomes could introduce the spindle-shaped PbWO₄ nanostructure as an efficient substance for eliminating water contamination under visible light.     

Using sonochemistry for the fabrication of hollow ZnO microspheres

Hollow ZnO microspheres assembled by nanoparticles have been prepared by a sonochemical synthesis at room temperature using carbon spheres as template. The growth process of the precursor was investigated. The prepared hollow spheres were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM). The diameter of the obtained hollow spheres is about 500 nm, and the walls are composed of numerous ZnO aggregate nanocrystallines with diameters of 90 nm. A possible growth mechanism for the formation of ZnO microspheres has been proposed, in which carbon spheres play a crucial role in the formation of the wurtzite hollow ZnO microspheres. The specific structure of the hollow spheres may find applications in nanoelectronics, nanophotonics and nanomedicine.     

Facile in situ hydrothermal synthesis of BiVO4/MWCNT nanocomposites as high performance visible-light driven photocatalysts

Visible-light responsive monoclinic BiVO₄/MWCNT nanocomposites were facilely prepared via an in situ hydrothermal method by using sodium dodecyl sulfonate (SDS) as a guiding surfactant. The as-prepared BiVO₄/MWCNT nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), the Fourier transform infrared spectroscopy (FTIR) and UV–vis diffuse reflectance spectroscopy. The results showed that the hydrothermal temperature and adding SDS had significant influence on the morphology and size of BiVO₄. The photocatalytic activities of BiVO₄/MWCNT nanocomposites were investigated by degrading methylene blue (MB) under visible-light irradiation. Remarkable enhancement in photodecomposition of MB was observed with BiVO₄/MWCNT composite compared with bare BiVO₄ particles. This improvement of photocatalytic was attributed to the effective charge transfer from BiVO₄ nanocrystals to MWCNT, which promoted the migration efficiency of photogenerated electron–hole. Furthermore, a possible mechanism for the photocatalytic oxidative degradation was also discussed.     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.     

Sonochemical assisted hydrothermal synthesis of pseudo-flower shaped Bismuth vanadate (BiVO4) and their solar-driven water splitting application

Bismuth vanadate (BiVO₄) is a well-known photocatalyst due to its lower bandgap (E_g) and visible electromagnetic light absorption capacity. Herein, we reported the pulse ultra-sonochemical assisted hydrothermal approach to synthesize S-BiVO₄. For the comparison purpose, H-BiVO₄ is also synthesized via conventional hydrothermal approach. The surface morphology of S-BiVO₄ through scanning electron microscope (SEM) indicates condensed microarrays (MAs) having pseudo-flower shapes. The energy dispersive X-rays (EDX) spectrum also confirmed the elemental percent composition of Bi, V and O in BiVO₄. X-rays diffraction (XRD) pattern further confirmed the monoclinic scheelite phase of S-BiVO₄. Fourier transformed infrared (FTIR) spectrum showed Bi–O and Bi–V–O vibrational bands at 1382 and 1630 cm⁻¹, respectively. The diffuse reflectance spectroscopy (DRS) indicated absorption edge at ∼515 nm, corresponds to bandgap value (E_g) of 2.41 eV, which is suitable range for water splitting applications. The photocurrent density from water splitting under artificial 1 SUN visible light source found at 60 and 50 μA/cm² for S-BiVO₄ and H-BiVO₄, respectively. The stability test through chronoamperometry showed that S-BiVO₄ was more stable than H-BiVO₄. It can be depicted from the growth mechanism that ultrasonication played a definite role in the overall synthesis of pseudo-flower shaped S-BiVO₄ MAs.     

Hydrothermal synthesis of graphitic carbon nitride–BiVO4 composites with enhanced visible light photocatalytic activities and the mechanism study

Novel graphitic carbon nitride (C₃N₄) and bismuth vanadate (BiVO₄) composite photocatalysts were successfully synthesized by a facile hydrothermal method. The scanning electron microscopy (SEM) revealed that an intimate interface between C₃N₄ and BiVO₄ formed in the composites. Compared with the pure C₃N₄ and BiVO₄, the C₃N₄–BiVO₄ photocatalysts showed remarkably the higher photocatalytic activities in degrading rhodamine B (Rh B). The best active heterojunction proportion was 0.5C₃N₄–0.5BiVO₄. Over this catalyst, the 100% degradation of Rh B (0.002 mmol L⁻¹) was obtained under visible light irradiation (λ>420 nm) for 40 min. The active species in Rh B degradation were examined by adding a series of scavengers. The study on photocatalytic mechanism revealed that the electrons injected directly from the conduction band of C₃N₄ to that of BiVO₄, resulting in the production of superoxide radical (O₂^•−) and hydroxyl radical (OH^•) in the conduction band of BiVO₄. Simultaneously, the rich holes in the valence band of g-C₃N₄ oxidized Rh B directly to promote the photocatalytic degradation reaction.     

水热法制备不同形貌和结构的BiVO4粉末

采用水热合成法,选择不同比例的起始原料、反应温度、反应时间、pH值和表面活性剂,制备出不同形貌和结构的BiVO₄粉末.采用X射线衍射、透射电子显微镜、扫描电子显微镜、拉曼、傅里叶红外和紫外-可见吸收光谱技术对产物进行分析表征.结果表明,提高n_Bi/n_V或反应液pH值,可得到纯的单斜晶系白钨矿型BiVO₄粉末;水热温度和水热时间的不同则得到不同尺寸和内部结构的BiVO₄粉末.另外,不同表面活性剂的加入则主要影响BiVO₄的微观形貌. 关键词： 4')" href="#">BiVO₄ 水热法 光催化