Photoluminescence of La/Ti mixed oxides prepared using sol–gel process and their pCBA photodecomposition

La/Ti mixed oxides with weight ratios of 1:9, 2:8, 3:7, and 4:6 were prepared by sol–gel method. The photocatalytic activity of La/Ti oxides was evaluated based on the pCBA photodecomposition. The catalyst samples were characterized by XRD, TEM, DRS, BET, and photoluminescence (PL) spectra. Particles of the La/Ti-mixed oxides showed the diameter of about 7 nm. We found that 30% doping of lanthanum ions on the TiO₂ powders induced the highest pCBA (4-chlorobenzonic acid) photodecomposition in these experimental conditions. The order of its photoactivity was as following: 30 > 20 > 0 > 10 > 40 wt%, which was the same for PL tendency. Also, PL spectra intensity increased with calcination temperature from 500 to 600 °C, then decreased at 700 °C. Phtotcatalytic activity followed the trend of the PL spectra intensity. The modification of TiO₂ surface by lanthanum ion made it possible to enhance the photoactivity by retarding the recombination of photoexcited electron/hole pairs, in the result of the higher photoactivity in the stronger PL intensity.     

Structural and spectroscopic studies of LaPO4:Ce/Tb@LaPO4@SiO2 nanorods: Synthesis and role of surface coating

Highly fluorescent LaPO₄:Ce/Tb@LaPO₄@SiO₂ (core/shell/Si) nanorods(NRs) were fabricated with an average length 100 nm by co-precipitation process at low temperature. X-ray diffraction (XRD), Transmission electron microscopy (TEM), energy dispersive X-ray analysis, Fourier transform infrared, optical absorption and photoluminescence spectral techniques were applied to investigate the crystal structure, phase purity, morphology, surface chemistry and optical properties of the as-prepared samples. XRD results confirmed the formation of highly crystalline with single phase, monoclinic type structure. TEM image illustrates the poly-dispersed, narrow size distributed, irregular size rod-shaped nanostructures, with mean diameters of 20 nm and average lengths up to 140 nm. FTIR spectral analysis confirmed the silica surface modification. The comparative emission spectral study shows highest luminescence intensity of core/shell NRs, due to a reduction in nonradiative transition rate. The emission intensity enhancement proves that growing of an inert LaPO₄ layer on the surface of luminescent core-NRs was an effective way to suppress surface related quenching mechanism. These well crystalline, highly aqueous soluble along with extraordinary colloidal stability core/shell/Si NRs were extremely suitable material in fluorescent bio-labeling applications.     

Improved luminescent behavior of YVO4:Eu3+ ceramic phosphors by Li contents

Crystalline phase and surface morphology of phosphors are important factors to determine luminescent characteristics. Li-doped YVO₄:Eu³⁺ ceramic samples were prepared by a solid state reaction method. The Li⁺ concentration was varied from 1 to 3 wt% to improve crystallinity and surface morphology of ceramics. Influence of Li doping on luminescent properties of YVO₄:Eu³⁺ ceramics has been investigated. Photoluminescence spectra have been measured at room temperature using a luminescence spectrometer and excitation by a broadband incoherent ultraviolet light source with an excitation wavelength of 325 nm. The emitted radiation was dominated by a red emission peak at 620 nm radiated from the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. As Li⁺ ion content increases from 0 to 2 wt%, the photoluminescence (PL) brightness improved. The brightness of 2 wt% Li-doped YVO₄:Eu³⁺ ceramic was increased by a factor of 1.43 in comparison with that of YVO₄:Eu³⁺ ceramic. The enhanced luminescence resulted not only from the improved crystallinity but also from the enhanced surface roughness. The luminescent intensity and surface roughness exhibited similar behavior as a function of Li⁺ ion concentration.     

Preparation,characterization and luminescent properties of spherical CaTiO3:Pr3+ phosphors by spray pyrolysis

In this paper, spherical Pr³⁺-doped CaTiO₃ phosphor particles were fabricated through a two-step spray pyrolysis process, using citric acid and polyethylene glycol (PEG) as additives. X-ray diffraction (XRD), scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), thermogravimetric and differential thermal analysis (TG–DTA), X-ray photoelectron spectra (XPS), photoluminescence (PL), cathodoluminescence (CL) spectroscopy, and lifetime measurements were employed to characterize these samples. The results reveal that the as-prepared CaTiO₃:Pr³⁺ phosphors are spherical with submicron particle size. The particles show a strong red emission corresponding to ¹D₂–³H₄ (612 nm) of Pr³⁺ under the ultraviolet excitation (325 nm) and low voltage electron beams (1–5 kV). Furthermore, the morphology, PL and CL intensities of the CaTiO₃:Pr³⁺ phosphors can be tuned by altering the concentration of PEG, annealing temperature, and acceleration voltage. These phosphors show potential applications in the field of field emission displays (FEDs).     

Solubility of novel open-chain crown ether bridged diphosphates in supercritical carbon dioxide

The solubility of newly synthesized chelating agents, i.e., tetraethylene glycol bis (2-ethylhexyl) dimethyl diphosphate (EG4EH), tetraethylene glycol bis (n-octyl) dimethyl diphosphate (EG4Oct), and tetraethylene glycol bis (2-butoxyethyl) dimethyl diphosphate (EG4BOE) in supercritical carbon dioxide (scCO₂) were determined at temperatures ranging from (318.15 to 333.15) K and pressures ranging from (12 to 21) MPa. Solubility increases in the order of EG4Oct (MW = 606.33) < EG4BOE (MW = 582.26) < EG4EH (MW = 606.33), indicating that branched side chains of the ligands play an important part in increasing solubility in scCO₂. Semi empirical density-based models proposed by Bartle and Chrastil were used to correlate the experimental data, and AARD values were calculated to be (1.2 to 2.9)% and (0.40 to 0.93)% for Bartle and Chrastil model, respectively. Additionally, the partial molar volumes of those compounds were estimated following the theory developed by Kumar and Johnston.     

In situ and one-step synthesis of hydrophobic zinc borate nanoplatelets

The polycrystalline and hydrophobic zinc borate (Zn₂B₆O₁₁·3H₂O) nanoplatelets were in situ successfully synthesized via one-step precipitation reaction in aqueous solution of Na₂B₄O₇·10H₂O and ZnSO₄·7H₂O with oleic acid as the modifying agent. The microstructures and morphology of the as-obtained samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). Measurements of the relative water contact angle and the active ratio indicated that Zn₂B₆O₁₁·3H₂O samples were hydrophobic. It had been found that the as-prepared materials displayed nanoplatelet morphology with average diameters 100–500 nm and thickness 30 ± 5 nm and the morphology and size of the samples were controlled effectively.     

A novel controllable synthesis of silica nanotube arrays with ultraviolet photoluminescence

The synthesis of large-scale one-dimensional silica nanotube (SNT) arrays embedded in Si substrate is demonstrated by using the combination of AAO template mask and Ar ion milling technique. The geometry of the SNTs could be precisely controlled by the process parameters, which included that the SNT diameter and the interpore distance were controlled by AAO anodization voltage and H₃PO₄ pore widening time, while the length of SNT was controlled by ion milling time and AAO aspect ratio. Also, the SNT fabrication parameters could be related to their photoluminescence (PL) emitting properties, when anodized at 40 V, pore widening in H₃PO₄ acid for 70 min and ion milled for 5 min, a strong intensity and stable ultraviolet (UV) light of 3.25 eV (381 nm) emitted from the SNTs under the excitation of 266 nm laser, which could be assumed arising from twofold coordinated silicon lone pair centers in the oxygen deficiency SNTs. The present fabrication of SNT arrays presents a novel method for intensity and frequency adjustable ultraviolet optoelectronic devices.     

Effect of Fluoride or Chloride Ions on the Morphology of ZrO2 Thin Film Grown in Ethylene Glycol Electrolyte by Anodization

0.3 wt % ammonium fluoride (NH₄F) or ammonium chloride (NH₄Cl) was added to ethylene glycol (EG) as an active ingredient for the formation of anodic oxide comprising of ZrO₂ nanotubes (ZNTs) by anodic oxidation of zirconium (Zr) at 20 V for 10 min. It was observed that nanotubes were successfully grown in EG/NH₄F/H₂O with aspect ratio of 144.3. Shorter tubes were formed in EG/NH₄F/H₂O₂. This could be due to higher excessive chemical etching at the tip of the tubes. When fluoride was replaced by chloride in both electrolytes, multilayered oxide resembling pyramids was observed. The pyramids have width at the bottom of 3-4 μm and the top is 1-2 μm with 10.7 μm height. Oxidation of Zr in EG/NH₄Cl/H₂O₂ was rater rapid. The multilayered structure is thought to have formed due to the re-deposition of ZrO₂ or hydrated ZrO₂ on the foil inside pores formed within the oxide layer. XRD result revealed an amorphous structure for as-anodized samples regardless of the electrolytes used for this work.     

A highly sensitive and selective resonance Rayleigh scattering method for Hg2+ based on the nanocatalytic amplification

In 0.2 mol/L HCl–0.22 mol/L HNO₃ medium, trace Hg²⁺ catalyzed NaH₂PO₂ reduction of HAuCl₄ to form gold nanoparticles (AuNPs), which exhibited a strong resonance Rayleigh scattering (RRS) effect at 370 nm. With increasing of [Hg²⁺], the RRS effect enhanced due to more AuNP generated from the catalytic reaction. Under the chosen conditions, the enhanced RRS intensity at 370 nm is linear to Hg²⁺ concentration in the range of 5.0–450 × 10⁻⁹ mol/L, with a detection limit of 0.1 nmol/L. This RRS method was applied for the determination of Hg in water samples, with high sensitivity and good selectivity, and its results were agreement with that of atomic fluorescence spectrometry.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

Nitrogen enriched mesoporous carbon spheres obtained by a facile method and its application for electrochemical capacitor

A kind of mesoporous carbon spheres (MCS) containing in-frame incorporated nitrogen has been prepared by a facile polymerization-induced colloid aggregation method. As the electrode material for electric double layer capacitor (EDLC) in 5 mol/L H₂SO₄, the MCS products present excellent specific capacitance as 211 F/g much larger than that of the most popularly applied activated carbon at a high discharge current density of 1 A/g. Its specific capacitance can still remain 200 F/g at 20 A/g. The superior electrochemical performance of MCS is associated with the following characteristics: high specific surface area (∼1330 m²/g) contributed mainly by the mesopores, uniform pore size as large as 29 nm and moderate content of nitrogen (10 wt%), which are the requirements for ideal supercapacitors.     

Fabrication and magnetic properties of electrospun copper ferrite (CuFe2O4) nanofibers

Tetragonal copper ferrite (CuFe₂O₄) nanofibers were fabricated by electrospinning method using a solution that contained poly(vinyl pyrrolidone) (PVP) and Cu and Fe nitrates as alternative metal sources. The as-spun and calcined CuFe₂O₄/PVP composite samples were characterized by TG-DTA, X-ray diffraction, FT-IR, and SEM, respectively. After calcination of the as-spun CuFe₂O₄/PVP composite nanofibers (fiber size of 89 ± 12 nm in diameter) at 500 °C in air for 2 h, CuFe₂O₄ nanofibers of 66 ± 13 nm in diameter having well-developed tetragonal structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. After calcination at 600 and 700 °C, the nature of nanofibers changed which was possibly due to the reorganization of the CuFe₂O₄ structure at high temperature, and a fiber structure of packed particles or crystallites was prominent. Crystallite size of the nanoparticles contained in nanofibers increases from 7.9 to 23.98 nm with increasing calcination temperature between 500 and 700 °C. Room temperature magnetization results showed a ferromagnetic behavior of the calcined CuFe₂O₄ samples, having their specific saturation magnetization (M_s) values of 17.73, 20.52, and 23.98 emu/g for the samples calcined at 500, 600, and 700 °C, respectively.     

Titanium oxide nanotubes prepared in phosphate electrolytes

In the present communication, we report the electrochemical formation of self-organized titanium oxide nanotubes (π-TiO₂) prepared in fluoride ion containing phosphate electrolytes. The morphology of the π-TiO₂ layers (particularly the pore diameter and length) is affected by the electrochemical conditions used (applied potential, electrolyte composition, pH, and anodizing time). Under specific sets of conditions highly self-organized titanium oxide nanotubes are formed with diameters varying from approx. 40 nm to 100 nm and length from approx. 100 nm to 4 μm. XPS investigations show that the nanotubes formed in phosphate solutions contain a significant amount of phosphorous species.     

Computational simulations of pore nucleation in silicon(1 1 1)

Float zone n-Si(1 1 1) was electrochemically etched in diluted NH₄F to form porous nuclei. The experimental results were compared with computational simulations of pore nucleation and growth. Electrochemical etching of silicon(1 1 1) results in pore nucleation preferentially localized on the edges of atomic terraces. The initial pore nuclei have diameter and depth of 17 nm and 0.3 nm, respectively. We find a correlation between H-terminated Si(1 1 1) atomic surface morphology and electric field distribution on pore nucleation and growth mechanism. The H-terminated surface is composed from wide (100–200 nm) atomic terraces with steps of 0.3 nm height. Electric field enhancement occurs at the terrace edges leading to focusing the holes trajectories. This leads to weakening of the Si–Si backbonds resulting in easy atom removing. The maximum electric field was observed at terrace edges and at the semispherical pore bottom.     

Effect of water content of ethylene glycol as electrolyte for synthesis of ordered titania nanotubes

Anodization of Ti using fluoride containing polyhydric alcohols such as ethylene glycol or glycerol as electrolyte results in ordered arrays of TiO₂ nanotubes with a smooth surface and a very high aspect ratio. However, the reproducibility of the result is affected by many experimental parameters, notably the water content. In this investigation, anodizations of Ti foil in anhydrous ethylene glycol +0.2 wt% NH₄F solution (EG solution) with 0–1.0 wt% water additions were carried out at 20 V for 45 min in a dry-argon filled controlled-atmosphere glove box. It was observed that a minimum amount of 0.18 wt% of water addition was required to form a well ordered TiO₂ nanotubular arrays. When the anhydrous EG solution was reused for third time, ordered arrays of nanotubes started to form. When the water addition to the EG solution was more than 0.5 wt%, formation of ridges was observed on the nanotubes. XPS results showed presence of un-anodized Ti element in the anhydrous condition and presence of organic and (NH₄)₂TiF₆ type compounds in all the anodized samples in addition to the regular TiO₂ phase. The results underline the influence of water content and local pH condition to form the ordered nanotubular arrays.     

Annealing effects on the morphology and luminescence of cubic boron nitride based ceramics

Cubic boron nitride based ceramics with silicon were sintered at 1350 °C under a pressure of 5.0 GPa. The effects of post-annealing on grain morphology, surface morphology, and photoluminescence of Si–cBN ceramics were investigated by scanning electron microscope and room temperature photoluminescence measurements. The results showed that the annealing treatment had great influence on cBN grain morphology, rather than the surface morphology. The luminescence intensity increased with annealing temperature and annealing time. The void-net structure formed by continuous distribution of SiO_x particulate on the ceramic surface resulted in the emission band peaking at about 701.2 nm, and the tense passivation of Si by SiO_x led to the peak's low intensity. The near ultraviolet emission band peaking at about 317 nm was attributed to the oxygen vacancies formed in cBN grain surface, caused by the scavenging of oxygen from the cBN grain surface by the added Si.     

Excited state structural dynamics and Herzberg–Teller coupling of tetraphenylporphine explored via resonance Raman spectroscopy and density functional theory calculation

Resonance Raman spectra of free-base tetraphenylporphine (TPP) were obtained with 397.9, 416, and 435.7 nm excitation wavelengths and density functional calculations were done to elucidate the electronic transitions and the resonance Raman spectra (RRs) of TPP. The RRs indicate that the Franck–Condon region photodynamics for S₀ → S₄ electronic state is predominantly along the C_m–ph stretch while that for S₀ → S₃ electronic state is predominantly along the porphin ring C_βC_β stretch. Non-totally symmetric vibrational modes were regularly presented in resonance Raman spectra: the shorter the excitation wavelengths were, the stronger intensity the modes had, which can be interpreted in terms of electric dipole transition moments caused by Franck–Condon and Herzberg–Teller coupling.Four non-total symmetry vibrational mode υ_52, υ₆₄, υ₉₇ and υ₁₃₀ in A₂ irreducible representative of TPP were observed in 397.9, 416 and 435.7 nm resonance Raman spectrum. With the shorter wavelength laser excitations at 416 or 397.9 nm, the A₂ vibrational modes show more enhanced Raman intensity by comparison with those in the TPP spectrum excited at 435.7 nm.     

Optical and dielectric properties of isothermally crystallized nano-KNbO3 in Er3+-doped K2O–Nb2O5–SiO2 glasses

Precursor glass of composition 25K₂O–25Nb₂O₅–50SiO₂ (mol%) doped with Er₂O₃ (0.5 wt% in excess) was isothermally crystallized at 800 °C for 0–100 h to obtain transparent KNbO₃ nanostructured glass–ceramics. XRD, FESEM, TEM, FTIRRS, dielectric constant, refractive index, absorption and fluorescence measurements were carried out to analyze the morphology, dielectric, structure and optical properties of the glass–ceramics. The crystallite size of KNbO₃ estimated from XRD and TEM is found to vary in the range 7–23 nm. A steep rise in the dielectric constant of glass–ceramics with heat-treatment time reveals the formation of ferroelectric nanocrystalline KNbO₃ phase. The measured visible photoluminescence spectra have exhibited green emission transitions of ²H_11/2, ⁴S_3/2 → ⁴I_15/2 upon excitation at 377 nm (⁴I_15/2 → ⁴G_11/2) absorption band of Er³⁺ ions. The near infrared (NIR) emission transition ⁴I_13/2 → ⁴I_15/2 is detected around 1550 nm on excitation at 980 nm (⁴I_15/2 → ⁴I_11/2) of absorption bands of Er³⁺ ions. It is observed that photoluminescent intensity at 526 nm (²H_11/2 → ⁴I_15/2), 550 nm (⁴S_3/2 → ⁴I_15/2) and 1550 nm (⁴I_13/2 → ⁴I_15/2) initially decrease and then gradually increase with increase in heat-treatment time. The measured lifetime (τ_f) of the ⁴I_13/2 → ⁴I_15/2 transition also possesses a similar trend. The measured absorption and fluorescence spectra reveal that the Er³⁺ ions gradually enter into the KNbO₃ nanocrystals.     

Dual-signal anodic stripping voltammetric determination of trace arsenic(III) at a glassy carbon electrode modified with internal-electrolysis deposited gold nanoparticles

A glassy carbon electrode (GCE) modified with internal-electrolysis deposited gold nanoparticles (AuNPs_ied) was applied to sensitively and selectively detect As(III) by anodic stripping linear sweep voltammetry (ASLSV). The AuNPs_ied/GCE was prepared based on the redox replacement reaction between a supporting-electrolyte-free aqueous HAuCl₄ and a copper sheet in saturated KCl separated by a salt bridge. Under optimum conditions (0.5 M aqueous H₂SO₄, 300-s preconcentration at − 0.4 V), the ASLSV peak current for the As(0)–As(III) oxidation responded linearly to As(III) concentration from 0.02 to 3 μM with a limit of detection (LOD) of 0.9 nM (0.07 μg L^− 1) (S/N = 3), while that for the As(III)–As(V) oxidation was linear with As(III) concentration from 0.02 to 1 μM with a LOD of 4 nM (0.3 μg L^− 1) (S/N = 3). An appropriate high-scan-rate for ASLSV can enhance both the sensitivity and signal-to-noise ratio. This method was applied for analyses of As(III) in real water samples.     

A new processing method of CaZn2(OH)6·2H2O powders: Photoluminescence and growth mechanism

In this communication, we report on the formation of calcium hexahydroxodizincate dehydrate, CaZn₂(OH)₆·2H₂O (CZO) powders under microwave-hydrothermal (MH) conditions. These powders were analyzed by X-ray diffraction (XRD), Field-emission gum scanning electron microscopy (FEG-SEM), ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL) measurements. XRD patterns confirmed that the pure CZO phase was obtained after MH processing performed at 130 °C for 2 h. FEG-SEM micrographs indicated that the morphological modifications as well as the growth of CZO microparticles are governed by Ostwald-ripening and coalescence mechanisms. UV-vis spectra showed that this material have an indirect optical band gap. The pure CZO powders exhibited an yellow PL emission when excited by 350 nm wavelength at room temperature.