Eu3+,Tb3+混配配合物的激光诱导荧光

利用激光诱导荧光技术研究了两种三价稀土金属离子的β－二酮与有机配体混配络合物中金属离子的寿命及其能级结构，得到了Ｅｕ＾３＋的能级常数。     

Luminescence of Tb3+ and Eu3+ doped amorphous zinc benzoates

The Tb(3+) and Eu(3+) doped amorphous zinc benzoate were prepared. Their infrared absorption, emission and excitation spectra were measured. The luminescence mechanisms of Tb(3+) and Eu(3+) in the amorphous substrate were discussed. The bonding modes of OCO group to Zn(2+) ion have two of symmetric and asymmetric bridging bidentate. The energy of the S(1) pi,pi* excited state of benzene ring can be transferred to Tb(3+) and Eu(3+) ion, and results in characteristic emission from the 5D(4)-->(7)F(j) of Tb(3+) and 5D(0)-->(7)F(j) of Eu(3+), respectively.     

Optical characterization of Eu3+ and Tb3+ ions doped zinc lead borate glasses

This paper reports on the spectral analysis of Eu3+ or Tb3+ ions (0.5 mol%) doped heavy metal oxide (HMO) based zinc lead borate glasses from the measurement of their absorption, emission spectra and also different physical properties. From the XRD, DSC profiles, the glass nature and glass thermal properties have been studied. The measured emission spectrum of Eu3+ glass has revealed five transitions (5D0-->7F0, 7F1, 7F2, 7F3 and 7F4) at 578, 591, 613, 654 and 702 nm, respectively, with lambdaexci=392 nm (7F0-->5L6). In the case of Tb3+:ZLB glass, four emission transitions such as (5D4-->7F6, 7F5, 7F4 and 7F3) that are located at 489, 542, 585 and 622 nm, respectively, have been measured with lambdaexci=374 nm. For all these emission bands decay curves have been plotted to evaluate their lifetimes and the emission processes that arise in the glasses have been explained in terms of energy level schemes.     

Energy transfer and tunable luminescence properties of Eu3+ in TbBO3 microspheres via a facile hydrothermal process

Tb (1- x) BO 3: xEu (3+) ( x = 0-1) microsphere phosphors have been successfully prepared by a simple hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), low-voltage cathodoluminescence (CL), and time-resolved emission spectra as well as lifetimes were used to characterize the samples. The as-obtained phosphor samples present sphere-like agglomerates composed of nanosheets with highly crystallinity in spite of the moderate reaction temperature of 200 degrees C. Under ultraviolet excitation into the 4f (8) --> 4f (7)5d transition of Tb (3+) at 245 nm (or 284 nm) and low-voltage electron beams' excitation, TbBO 3 samples show the characteristic emission of Tb (3+) corresponding to (5)D 4 --> (7)F 6, 5, 4, 3 transitions; whereas TbBO 3:Eu (3+) samples mainly exhibit the characteristic emission of Eu (3+) corresponding to (5)D 0 --> (7)F 0, 1, 2, 3, 4 transitions due to an efficient energy transfer occurs from Tb (3+) to Eu (3+). The increase of Eu (3+) concentration leads to the increase of the energy-transfer efficiency from Tb (3+) to Eu (3+) but also enhances the probability of the interaction between neighboring Eu (3+), which results in the concentration quenching. The PL color of TbBO 3: xEu (3+) phosphors can be easily tuned from green, yellow, orange, to red-orange by changing the doping concentration ( x) of Eu (3+), making the materials have potential applications in fluorescent lamps for advertizing signs and other color display fields.     

Synthesis and photophysical properties of new Ln(III) (Ln = Eu(III), Gd(III), or Tb(III)) complexes of 1-amidino-O-methylurea

Three new solid lanthanide(III) complexes, [Ln(1-AMUH)₃] · (NO₃)₃ (1-AMUH = 1-amidino-O-methylurea; Ln = Eu(III), Gd(III), or Tb(III)) were synthesised and characterised by elemental analysis, infrared spectra, magnetic moment measurement, and electron paramagnetic resonance (EPR) spectra for Gd(III) complex. The formation of lanthanide(III) complexes is confirmed by the spectroscopic studies. The photophysical properties of Gd(III), Eu(III), and Tb(III) complexes in solid state were investigated. The Tb(III) complex exhibits the strongest green emission at 543 nm and the Eu(III) complex shows a red emission at 615 nm while the Gd(III) complex shows a weak emission band at 303 nm. Under excitation with UV light, these complexes exhibited an emission characteristic of central metal ions. The powder EPR spectrum of the Gd(III) complex at 300 K exhibits a single broad band with g = 2.025. The bi-exponential nature of the decay lifetime curve is observed in the Eu(III) and Tb(III) complexes. The results reveal them to have potential as luminescent materials.     

Highly uniform and monodisperse beta-NaYF(4):Ln(3+) (Ln = Eu, Tb, Yb/Er, and Yb/Tm) hexagonal microprism crystals: hydrothermal synthesis and luminescent properties

beta-NaYF4:Ln3+ (Ln = Eu, Tb, Yb/Er, and Yb/Tm) hexagonal microprisms with remarkably uniform morphology and size have been synthesized via a facile hydrothermal route. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra as well as kinetic decays were used to characterize the samples. It is found that sodium citrate as a shape modifier introduced into the reaction system plays a critical role in the shape evolution of the final products. Furthermore, the shape and size of the products can be further manipulated by adjusting the molar ratio of citrate/RE3+ (RE represents the total amount of Y3+ and the doped rare earth elements such as Eu3+, Tb3+, Yb3+/Er3+, or Yb3+/Tm3+). Under the excitation of 397 nm ultraviolet light, NaYF4:xEu3+ (x = 1.5, 5%) shows the emission lines of Eu3+ corresponding to 5D0-3 --> 7FJ (J = 0-4) transitions from 400 to 700 nm (whole visible spectral region) with different intensity, resulting in yellow and red down-conversion (DC) light emissions, respectively. When doped with 5% Tb3+ ions, the strong DC fluorescence corresponding to 5D4 --> 7FJ (J = 6, 5, 4, 3) transitions with 5D4 --> 7F5 (green emission at 544 nm) being the most prominent group that has been observed. In addition, under 980 nm laser excitation, the Yb3+/Er3+- and Yb3+/Tm3+-codoped beta-NaYF4 samples exhibit bright green and whitish blue up-conversion (UC) luminescence, respectively. The luminescence mechanisms for the doped lanthanide ions were thoroughly analyzed.     

Spectroscopic properties and intense red-light emission of (Ca, Eu, M)WO4 (M=Mg, Zn, Li)

The red-emitting phosphors of (Ca, Eu, M)WO4 (M=Mg, Zn, Li) were prepared through solid-state reactions, and their spectroscopic properties were studied. After the addition of a small amount of Mg2+, Zn2+ or Li+ in (Ca, Eu)WO4, the red-light emission intensity of Eu3+ increases obviously. In the luminescence spectra of the phosphors, the predominant transition emission is 5D0-->7F2 (616nm), whereas the other emissions are very weak. The excitation spectra are composed of interweaved ligand-to-metal charge-transfer bands (CTB) of W6+-O(2-) and Eu3+-O(2-), and a few 4f excitation transitions of Eu3+. Among the 4f excitation transitions of Eu3+, there are three strong excitation lines corresponding to 7F0-->5L6, 7F0-->5D2 and 7F0-->5D1 transitions, whose relative excitation intensity ratio is seriously affected when Li+ doped in the host. The new phosphors may be applied as red-emitting phosphors for white light emitting diodes.     

Optical characterization of Eu3+ and Tb3+ ions doped cadmium lithium alumino fluoro boro tellurite glasses

This article reports on the development and spectral results of Eu(3+) and Tb(3+) ions doped cadmium lithium alumino fluoro boro tellurite (CLiAFBT) glasses in the following composition. 40TeO2-30B2O3-10CdO-10Li2O-10AlF3 (Hostglass) (40-x)TeO2-30B2O3-10CdO-10Li2O-10AlF3-xEu2O3 (40-x)TeO2-30B2O3-10CdO-10Li2O-10AlF3-xTb4O7 where x=0.25, 0.50, 0.75, 1.0, 1.25 mol%. Glass amorphous nature and thermal properties have been studied using the XRD and DSC profiles. From the emission spectra of Eu(3+):glasses, five emission transitions have been observed at 578 nm, 592 nm, 612 nm, 653 nm, 701 nm and are assigned to the transitions (5)D(0)→(7)F(0), (7)F(1,)(7)F(2), (7)F(3) and (7)F(4), respectively, with λ(exci)=392 nm ((7)F(0)→(5)L(6)). In case of Tb(3+):glasses, four emission transitions ((5)D(4)→(7)F(6,)(7)F(5), (7)F(4) and (7)F(3)) are observed at 488 nm, 543 nm, 584 nm and 614 nm, respectively, with λ(exci)=376 nm. Decay curves and energy level diagrams have been plotted to evaluate the life times and to analyze the emission mechanism.     

Solvothermal synthesis and characterization of Ln (Eu3+, Tb3+) doped hydroxyapatite

Luminescent Ln (Eu3+, Tb3+) doped hydroxyapatite (Eu:HAp, Tb:HAp) phosphors were successfully fabricated via the cetyltrimethylammonium bromide (CTAB)/n-octane/n-butanol/water microemulsion-mediated solvothermal process. The structure, morphology, and optical properties were systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence (PL) spectra as well as the kinetic decays, respectively. The XRD results reveal that the obtained Eu:HAp and Tb:HAp show the characteristic peaks of hydroxyapatite in a hexagonal lattice structure. It is observed that the as-prepared luminescent samples exhibit rod-like morphology with well dispersed and non-aggregated size distribution. Upon excitation by UV radiation, the phosphors demonstrate the characteristic 5D 0-7F 1-4 emission lines of Eu3+ and the characteristic 5D4-7F 3-6 emission lines of Tb3+. Moreover, the photoluminescence intensities (PL) of Eu3+ and Tb3+ can be tuned by altering the solvothermal temperature and the doping concentration of Eu3+ and Tb3+.     

Ca3La3(BO3)5中Eu3+的光致发光

本文详细地研究了紫外光激发下,Ca_3La_3(BO_3)_5中Eu~(3+)的发光光谱和激发光谱与组成、结构的关系.发现Eu~(3+)在此基质中可能不止一个发光中心;Eu~(3+)自身浓度猝灭的机理为电四极-四极相互作用.     

Novel red-emitting Ba2Tb(BO3)2Cl:Eu phosphor with efficient energy transfer for potential application in white light-emitting diodes

A novel red-emitting Ba(2)Tb(BO(3))(2)Cl:Eu phosphor possessing a broad excitation band in the near-ultraviolet (n-UV) region was synthesized by the solid-state reaction. Versatile Ba(2)Tb(BO(3))(2)Cl compound has a rigid open framework, which can offer two types of sites for various valence's cations to occupy, and the coexistence of Eu(2+)/Eu(3+) and the red-emitting luminescence from Eu(3+) with the aid of efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) have been investigated. Ba(2)Tb(BO(3))(2)Cl emits green emission with the main peak around 543 nm, which originates from (5)D(4) → (7)F(5) transition of Tb(3+). Ba(2)Tb(BO(3))(2)Cl:Eu shows bright red emission from Eu(3+) with peaks around 594, 612, and 624 nm under n-UV excitation (350-420 nm). The existence of Eu(2+) can be testified by the broad-band excitation spectrum, UV-vis reflectance spectrum, X-ray photoelectron spectrum, and Eu L(3)-edge X-ray absorption spectrum. Decay time and time-resolved luminescence measurements indicated that the interesting luminescence behavior should be ascribed to efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) in Ba(2)Tb(BO(3))(2)Cl:Eu phosphors.     

Patterning of Gd2(WO4)3:Ln3+ (Ln=Eu, Tb) luminescent films by microcontact printing route

Gd(2)(WO(4))(3) doped with Eu(3+) or Tb(3+) thin phosphor films with dot patterns have been prepared by a combinational method of sol-gel process and microcontact printing. This process utilizes a PDMS elastomeric mold as the stamp to create heterogeneous pattern on quartz substrates firstly and then combined with a Pechini-type sol-gel process to selectively deposit the luminescent phosphors on hydrophilic regions, in which a Gd(2)(WO(4))(3):Ln(3+) (Ln=Eu, Tb) precursor solutions were employed as ink. X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectra, as well as low voltage cathodoluminescence (CL) spectra were carried out to characterize the obtained samples. Under ultraviolet excitation and low-voltage electron beams excitation, the Gd(2)(WO(4))(3):Eu(3+) samples exhibit a strong red emission arising from Eu(3+)(5)D(0,1,2)-(7)F(1,2) transitions, while the Gd(2)(WO(4))(3):Tb(3+) samples show the green emission coming from the characteristic emission of Tb(3+) corresponding to (5)D(4)-(7)F(6,5,4,3) transitions. The results show that the patterning of rare earth-doped phosphors through combining microcontact printing with a Pechini-type sol-gel route has potential for field emission displays (FEDs) applications.     

Luminescence and microstructures of Eu(3+)-doped Ca9LiGd(2/3)(PO4)7

A red-emitting phosphor, Eu(3+)-doped Ca(9)LiGd(2/3)(PO(4))(7), was synthesized by the conventional high-temperature solid-state reaction. X-ray powder diffraction (XRD) analyses confirmed the pure crystalline phase of Whitlockite-type structure. The excitation spectra of Eu(3+) doped Ca(9)LiGd(2/3)(PO(4))(7) were measured in the VUV and UV region indicating an efficient energy transfer process from the host and Gd(3+) to Eu(3+) ions. Upon excitation with VUV and UV radiation, the phosphor showed strong red emission around 611 nm corresponding to the forced electric dipole (5)D(0)→(7)F(2) transition of Eu(3+) ions. The VUV- and UV-excited luminescence spectra of Ca(9)LiGd(2/3)(PO(4))(7):Eu(3+) together with the dependence of the integrated emission intensities on the doping levels were investigated. The Eu(3+) ions were investigated by a tunable laser as an excitation source. The excitation spectra of (7)F(0)→(5)D(0) transitions suggest that there are two families of inequivalent sites for Eu(3+) in this host. The concentration quenching and crystallographic site-occupancy of Eu(3+) ions in Ca(9)LiGd(2/3)(PO(4))(7) host were discussed on the basis of the site selective excitation and emission spectra, the luminescence decay and its crystal structure.     

绿色荧光粉KNaCa2（PO4）2:Tb3+的制备及发光性能研究

采用高温固相法成功制备了KNaCa2(PO4)2:Tb3+绿色荧光粉,并研究了其发光性质。测量了其激发和发射光谱,样品发射峰位于418,440,492,545,586,622 nm,分别对应Tb3+的5 D3→7 F5,5 D3→7 F4,5 D4→7 F6,5 D4→7 F5,5 D4→7 F4,5 D4→7 F3能级跃迁,主发射峰位于545 nm。主激发峰位于350～390 nm之间,属于4f→4f电子跃迁吸收,与InGaN管芯匹配。确定了在KNaCa2(PO4)2基质中Tb3+浓度对其发光强度的影响及其自身浓度猝灭机制。研究了不同电荷补偿剂对KNaCa2(PO4)2:Tb3+材料发光的影响,其中Li+离子改善其发光强度最为明显。     

The effects of Gd3+ substitution on the crystal structure, site symmetry, and photoluminescence of Y/Eu layered rare-earth hydroxide (LRH) nanoplates

Well crystallized nanoplates of the (Y(0.95-x)Gd(x)Eu(0.05))(2)(OH)(5)NO(3)·nH(2)O ternary layered rare-earth hydroxides (LRHs), synthesized hydrothermally, have been investigated with emphasis on the effects of Gd(3+) substitution for Y(3+) on the structural features and optical properties. Characterizations of the materials were achieved by the combined techniques of XRD, FT-IR, TEM, DTA/TG, and optical spectroscopies. The results showed that Gd(3+) substitution leads to linearly expanded ab plane, shortened interlayer distance (c/2), and reduced hydration (smaller n value) of the crystal structure. As a consequence, the Ln(3+) partially shifts from the C(4v) to C(1) site symmetries and thus leads to systematically altered photoluminescence behaviors. Under the (7)F(0)→(5)L(6) transition excitation of Eu(3+) at 394 nm, both the (5)D(0)→(7)F(2) to (5)D(0)→(7)F(4) and the 595 nm (5)D(0)→(7)F(1) to 590 nm (5)D(0)→(7)F(1) intensity ratios linearly increase towards a higher Gd(3+) content. The incorporated Gd(3+) cations selectively sensitize emission from the C(1)-site Eu(3+) and produce a new charge transfer (CT) excitation band at ～254 nm. With this, the desired 615-nm red emission is obtainable either under intra-4f(6) transition excitation of Eu(3+) or by exciting the CT band. The materials have similar fluorescence lifetimes of 0.85 ± 0.05 ms for the 615-nm emission, irrespective of the Gd(3+) content and excitation wavelength.     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

3-Phenyl-4-benzoyl-5-isoxazolonate complex of Eu3+ with tri-n-octylphosphine oxide as a promising light-conversion molecular device

Three new europium complexes, [Eu(PBI)3.3H2O] (1), [Eu(PBI)3.2TOPO] (2), and [Eu(PBI)3.2TPPO.H2O] (3) (where HPBI, TOPO, and TPPO stand for 3-phenyl-4-benzoyl-5-isoxazolone, tri-n-octylphosphine oxide, and triphenylphosphine oxide, respectively), with different neutral ligands were synthesized and characterized by elemental analysis, Fourier transform infrared, (1)H NMR, thermogravimetric analysis, and photoluminescence (PL) spectroscopy. The coordination geometries of the complexes were calculated using the Sparkle/AM1 (Sparkle Model for the Calculation of Lanthanide Complexes within the Austin Model 1) model. The ligand-Eu3+ energy-transfer rates were calculated in terms of a model of the intramolecular energy-transfer process in lanthanide coordination compounds reported in the literature. The room-temperature PL spectra of the europium(III) complexes are composed of the typical Eu3+ red emission, assigned to transitions between the first excited state (5D0) and the multiplet (7F(0-4)). On the basis of emission spectra and lifetimes of the 5D0-emitting level, the emission quantum efficiency (eta) was determined. The results clearly show that the substitution of water molecules by TOPO leads to greatly enhanced quantum efficiency (i.e., 26% vs 92%) and longer 5D0 lifetimes (250 vs 1160 micros). This can be ascribed to a more efficient ligand-to-metal energy transfer and a less nonradiative 5D0 relaxation process. Judd-Ofelt intensity parameters (Omega2 and Omega4) were determined from the emission spectra for the Eu3+ ion based on the 5D0 --> 7F2 and 5D0 --> 7F4 electronic transitions, respectively, and the 5D0 --> 7F1 magnetic-dipole-allowed transition was taken as the reference. A point to be noted in these results is the relatively high value of the Omega2 intensity parameter for all of the complexes. This may be interpreted as being a consequence of the hypersensitive behavior of the 5D0 --> 7F2 transition. The dynamic coupling mechanism is, therefore, dominant, indicating that the Eu3+ ion is in a highly polarizable chemical environment.     

Photoluminescent layered Y(III) and Tb(III) silicates doped with Ce(III)

The synthesis and structural characterization of new layered rare-earth silicates K(3)[M(1-a)Ce(a)Si(3)O(8)(OH)(2)], M = Y(3+), Tb(3+), a < 1 (AV-22 materials), have been reported. These materials combine the properties of layered silicates, such as intercalation chemistry, and photoluminescence and may find applications in new types of sensor devices. For mixed Tb/Ce-AV-22, evidence has been found for the energy transfer from the large Ce(3+) 4f( 1) --> 5d(1) broad band to the sharp Tb(3+) 4f (8) lines. This energy transfer allows the fine-tuning of the color emission in the blue-green region of the chromaticity diagram. Upon Ce(3+) excitation (342 nm), the radiance of Tb/Ce-AV-22 is approximately 2 times higher than that measured under direct Tb(3+) excitation, which reinforces the existence of effective room-temperature Ce(3+)-to-Tb(3+) energy transfer.     

Cooperative energy transfer frequency upconversion in Tb3+/Yb3+-codoped oxyfluoride glasses

In this report, we investigate the cooperative energy transfer frequency upconversion in Tb3+/Yb3+-codoped SiO2-Al(2)O(3)-Na2O-ZnF(2) oxyfluoride glasses under 980 nm diode laser excitation. The influence of both Tb3+ and Yb3+ concentration on the emission bands were investigated. With a lower Tb3+ concentration, the emission bands around 381, 416 and 438 nm, and 489, 545, 587 and 623 nm associated with (5)D(3), (5)G(6)-->(7)F(J) (J=6, 5, 4) and (5)D(4)-->(7)F(J) (J=6, 5, 4, 3) transitions were observed. However, only (5)D(4)-->(7)F(J) (J=6, 5, 4, 3) transitions appear in a higher Tb3+ concentration. The integrated upconversion luminescence intensity was examined when the temperature of sample was varied from 40 to 450 K. The dependence of the upconversion emission intensity upon the excitation power was also examined, and the upconversion mechanisms were discussed.     

Bifunctional Mixed-Lanthanide Cyano-Bridged Coordination Polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), Tb(3+)/Sm(3+))

A new family of mixed-lanthanide cyano-bridged coordination polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (where Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), and Tb(3+)/Sm(3+)) containing two lanthanide and one transition metal ions were obtained and characterized by X-ray diffraction, photoluminescence spectroscopy, magnetic analyses, and theoretical computation. These compounds are isotypical and crystallize in the tetragonal system P4/nmm forming two-dimensional grid-like networks. They present a magnetic ordering at low temperature and display the red Eu(3+) ((5)D(0) → (7)F(0-4)) and green Tb(3+) ((5)D(4) → (7)F(6-2)) characteristic photoluminescence. The Tb(0.5)Eu(0.5)(H(2)O)(5)[W(CN)(8)] compound presents therefore green and red emission and shows Tb(3+)-to-Eu(3+) energy transfer.