Morphological investigation of hybrid Langmuir-Blodgett films of arachidic acid with a hydrotalcite/dendrimer nanocomposite

A hydrotalcite clay/dendrimer nanocomposite prepared by the ionic exchange process was adsorbed from suspension of the nanocomposite on a Langmuir monolayer of arachidic acid at the air/water interface, followed by compressing and transferring onto an arachidic acid monolayer Langmuir-Blodgett (LB) film on mica. For comparison, the hydrotalcite-adsorbed hybrid film was also prepared. The morphology of hydrotalcite and the nanocomposite studied by transmission electron microscopy indicated the layered structures with respectively 1.2 +/- 0.3 and 3.2 +/- 0.5 nm repeating distances. The hybrid Langmuir films displayed the occupied surface area of 0.24 nm2 for both hydrotalcite and the nanocomposite. The formation of hybrid Langmuir films was confirmed by Brewster angle microscopy. Atomic force microscopic images of hybrid LB films revealed the formation of plateau domains with the height difference of 6 nm for hydrotalcite and 12 nm for the nanocomposite and the presence of dendrimers adsorbed on the clay surface of the nanocomposite.     

Simple method for preparation of porous polyimide film with an ordered surface based on in situ self-assembly of polyamic acid and silica microspheres

In this Article, we addressed a facile method for the fabrication of porous polyimide film with an ordered surface based on the solvent-evaporation-assisted in situ self-assembly of polyamic acid (PAA, precursor of polyimide) and silica microspheres during vacuum-drying of PAA/silica colloid solution. Hydroxyl groups on the surface of silica microspheres have strong hydrogen-bonding with PAA chains, which improve the dispersion of silica microspheres in PAA/DMF solution and further help the self-assembly of PAA/silica colloid solution via solvent evaporation. The approach is simple, neither the preparation of special template nor complex preparation process and precise control over condition is necessary. Furthermore, the method could be employed for mass production of ordered porous polyimide films, and by changing the content and size of silica microspheres, the pore size and porous structure of the porous polyimide films could be tunable. The wettability behavior of the as-prepared porous polyimide films is also studied; the ordered surface topography of the porous polyimide films could change the wettability from hydrophilicity to hydrophobicity.     

Étude de l’élimination du Cr(VI) par l’oxyde mixte obtenu par calcination de l’hydroxyde double lamellaire MgAl

A magnesium aluminium hydrotalcite-like compound (HT) containing carbonate anions in the interlayer space and with a final Mg/Al ratio of 2 was synthesized by the co-precipitation method. The obtained material was characterized by powder X-ray diffraction (XRD), Fourier-Transform–Infrared spectroscopy (FT–IR), thermal analysis (ATG/ATD), and surface area measurements (BET). The interaction of the clay with Cr(VI) has been studied by ultraviolet–visible (UV–vis) spectroscopy. The calcined hydrotalcite (HT-C) showed the highest capacity of removal of chromium ions, and their sorption capacities for Cr(VI) are 4.85 mmol/g. The effect of various parameters on the preparation conditions for the removal of chromium, such as the contact time, the amount of sorbent, the initial concentration of Cr(VI), and the pH values of aqueous solution were also investigated to identify their influence on Cr(VI) sorption. The characterization of the calcined hydrotalcite (HT-C) after interaction with Cr(VI) ions by FT–IR spectroscopy showed that Cr(VI) was adsorbed and intercalated by the solid.     

智能蜂窝状有序多孔薄膜：体系构建、响应性能及应用探索

蜂窝状有序多孔膜是一种典型的具有微、纳米尺寸的图案化高分子薄膜材料,在超疏水表面、光电材料、组织工程、生物医学、传感器等领域都具有良好的应用前景。表面形貌或性质具有可逆刺激响应特性的智能型多孔膜不仅拥有常规多孔膜的性能,而且还拥有独特的"开-关"功能,因此受到广泛关注。本文回顾了智能有序多孔膜近年的研究进展,重点对其体系构建、响应方式、机理、性能和相关应用进行了归纳与分析,评述了不同刺激响应多孔膜的特点及优劣势,探讨了智能多孔膜的优化设计及提高响应性能等问题,指出了目前面临的挑战,并展望了未来的发展方向。     

不同导电基底对TiO2薄膜光致亲水性的影响

分别在导电铝合金片(Al)和具有阳极氧化铝层的非导电铝片(AAO/Al), 以及铟锡氧化物导电玻璃(ITO/glass)和普通非导电玻璃(glass)表面通过提拉法制备出TiO2/Al和TiO2/AAO/Al, 以及TiO2/ITO/glass和TiO2/glass两组TiO2薄膜样品, 通过测试紫外光照下水滴接触角的变化考察TiO2薄膜的光致亲水性. 结果表明, 相对于TiO2/Al2O3/Al, 基底导电的TiO2/Al表现出较好的光致亲水性能; 而相对于TiO2/glass, 基底导电的TiO2/ITO/glass表现出较差的光致亲水性能. 分析认为, Al和ITO两导电基底和TiO2薄膜间的不同电子转移方向影响TiO2薄膜的光致亲水性能, Al片提供电子给TiO2有助于提高以光生电子为主要初级活性物种的光致亲水性, 而ITO接受TiO2的光生电子, 导致光致亲水性的下降.     

Control of moisture at buried polymer/alumina interfaces through substrate surface modification

Moisture absorption in poly(4-tert-butoxycarbonyloxystyrene) (PBOCSt) films supported on Al(2)O(3) sputter coated silicon wafers is measured using neutron and X-ray reflectivity. Accumulation of water at the interface during moisture exposure results in an apparent film-thickness-dependent swelling for ultrathin PBOCSt films. The swelling of a film on Al(2)O(3) is less than the swelling of a film of the same thickness on SiO(x) for films thinner than 20 nm. This is due to comparatively less moisture accumulation at the Al(2)O(3)/PBOCSt interface. A simple, zero adjustable parameter model consisting of a fixed water-rich layer at the interface and bulk swelling through the remainder of the film describes the thickness-dependent swelling quantitatively. The influence of four different Al(2)O(3) surface treatments on the moisture distribution within PBOCSt films was examined: bare Al(2)O(3), tert-butylphosphonic acid, phenylphosphonic acid, and n-octyltrichlorosilane. Both the phenyl and the octyl surface treatments reduce the accumulation of water at the polymer/substrate interface. The tert-butyl treatment does not reduce the interfacial water concentration, presumably due to insufficient surface coverage.     

Influence of substrate nature and growth conditions on the morphology of thin DMOAP films

We report some preliminary results on the morphology of thin N,N -dimethyl- n -octadecyl-3-aminopropyltrimethoxysilyl chloride (DMOAP) films. When deposited on a glass substrate, DMOAP forms a mono- or multi-layer structure parallel to the substrate. The surface topography of the film is probed by atomic force microscopy. In general, the free surface of such a film is not flat and smooth. Islands and holes are formed on the free surface of the films when a sufficiently flat substrate is used. The thin film surface topography depends strongly on the nature of the bare substrate, the curing conditions, and the immersion time of the substrate in the DMOAP solution. The film is always rougher than the bare substrate used. Annealing roughens the surface of the alkoxysilane thin films deposited on a glass substrate. For films on glass plates covered with an indium tin oxide layer, annealing has minor effects. The surface topography affects the microstructure of homeotropic smectic samples.     

An amphiphilic graft copolymer as a surface-modifying additive for poly(methyl methacrylate)

An amphiphilic graft copolymer was prepared by transesterification of poly(2-ethylhexyl acrylate-co-methyl methacrylate) with poly(ethylene glycol) monomethyl ether (MPEG2000). The grafting reaction was performed in melt at 155°C. The purified graft copolymer was blended into poly(methyl methacrylate) in concentrations of 1.5-30 wt %, either by mixing in chloroform solution or by melt mixing by means of a twin-screw extruder or a Brabender blender. Films of the blends were prepared by solution casting onto glass plates or by hot pressing between polished Al plates. At concentrations up to 20% of the graft copolymer homogeneous blends were obtained. At higher concentrations the blends were heterogeneous, and side-chain crystallinity was detectable by DSC analysis. The surface properties of the films were studied by measurements of water contact angles. The surface accumulation of the graft copolymer was demonstrated as a large increase in the wetting angle hysteresis, and found to depend on the procedure for film preparation as well as the casting substrate. © 1995 John Wiley & Sons, Inc.     

Energetic mapping of Ni catalysts by detailed kinetic modeling

Temperature-programmed desorption (TPD) of CO has been performed on supported and unsupported nickel catalysts. The unsupported Ni catalyst consists of a Ni(14 13 13) single crystal which has been studied under ultrahigh vacuum conditions. The desorption energy for CO at low CO surface coverage was found to be 119 kJ/mol, and the binding energy of C to the Ni(111) surface of the crystal was 703 kJ/mol. The supported catalysts consist of nickel supported on hydrotalcite-like compounds with three different Mg2+/Al3+ ratios. The experimental results show that for the supported Ni catalysts TPD of CO leads to desorption of both CO and CO2, with the latter being dominant. Dissociation of CO takes place, and considerable amounts of residue C are left on the surface. The residue C is removed by temperature-programmed oxidation (TPO). The results show that a low Mg2+/Al3+ ratio in the hydrotalcite precursor seems to result in more steplike sites, kinks, and defects for carbon monoxide dissociation. A detailed kinetic modeling of the TPO results based on elementary reaction steps has been conducted to give an energetic map of supported Ni catalysts. Experimental results from the ideal Ni surface fit nicely with literature values, providing useful information for identifying active sites on supported Ni catalysts.     

Influence of substrate nature and growth conditions on the morphology of thin DMOAP films

We report some preliminary results on the morphology of thin N,N -dimethyl-n-octadecyl-3-aminopropyltrimethoxysilyl chloride (DMOAP) films. When deposited on a glass substrate, DMOAP forms a mono- or multi-layer structure parallel to the substrate. The surface topography of the film is probed by atomic force microscopy. In general, the free surface of such a film is not flat and smooth. Islands and holes are formed on the free surface of the films when a sufficiently flat substrate is used. The thin film surface topography depends strongly on the nature of the bare substrate, the curing conditions, and the immersion time of the substrate in the DMOAP solution. The film is always rougher than the bare substrate used. Annealing roughens the surface of the alkoxysilane thin films deposited on a glass substrate. For films on glass plates covered with an indium tin oxide layer, annealing has minor effects. The surface topography affects the microstructure of homeotropic smectic samples.     

Preparation and photoelectrochemical performance of PbSe/BaTiO3/TiO2 composite film

By dipping-lifting in sol–gel solution and reducing process, the TiO₂ composite film on the glass plate was first prepared. Then, the PbSe/BaTiO₃/TiO₂ composite film was fabricated by interface reaction with BaTiO₃ and PbSe on the surface of TiO₂ composite film. The characterization results show that the uniform porous TiO₂ film is made up of the anatase crystal, and the PbSe/BaTiO₃/TiO₂ composite film is constructed by doping or depositing BaTiO₃ and PbSe nanoparticles on the surface of TiO₂ film. The photoelectrochemical measurement results indicate that the PbSe/BaTiO₃/TiO₂ composite film has an interesting photoelectrochemical conversion property.     

Decomposition of Pt-intercalated hydrotalcite-like nanocomposites to produce micro/mesoporous catalysts

Platinum intercalated into a hydrotalcite-like solid, Mg0.74Al0.26(OH)2(NO3)0.26, was found to catalytically reduce interlayer nitrate (NO3-) to N2/N2O so as to give rise to a large surface area micro/mesoporous structure at lower temperature of ca. 300 degrees C, compared to 500 degrees C required for the decomposition of the pristine hydrotalcite phase.     

MOF thin films: existing and future applications

The applications and potentials of thin film coatings of metal-organic frameworks (MOFs) supported on various substrates are discussed in this critical review. Because the demand for fabricating such porous coatings is rather obvious, in the past years several synthesis schemes have been developed for the preparation of thin porous MOF films. Interestingly, although this is an emerging field seeing a rapid development a number of different applications on MOF films were either already demonstrated or have been proposed. This review focuses on the fabrication of continuous, thin porous films, either supported on solid substrates or as free-standing membranes. The availability of such two-dimensional types of porous coatings opened the door for a number of new perspectives for functionalizing surfaces. Also for the porous materials themselves, the availability of a solid support to which the MOF-films are rigidly (in a mechanical sense) anchored provides access to applications not available for the typical MOF powders with particle sizes of a few μm. We will also address some of the potential and applications of thin films in different fields like luminescence, QCM-based sensors, optoelectronics, gas separation and catalysis. A separate chapter has been devoted to the delamination of MOF thin films and discusses the potential to use them as free-standing membranes or as nano-containers. The review also demonstrates the possibility of using MOF thin films as model systems for detailed studies on MOF-related phenomena, e.g. adsorption and diffusion of small molecules into MOFs as well as the formation mechanism of MOFs (101 references).     

聚苯乙烯胶晶膜及三维有序大孔SiO2膜的制备及表征

采用垂直沉积法组装了三维聚苯乙烯胶晶膜,并用其为模板制备了三维有序大孔（3DOM）SiO2膜．SEM观察表明,制备的胶晶膜和3DOMSiO2膜具有fcc结构,有序性很好．考察乳液浓度对胶晶膜结构的影响表明,浓度越高,胶晶膜越厚,有序性也越高,膜在30层内都能很好的粘附在载玻片上．通过调整前驱物溶液的浓度和滴加方式,可得到表面为球形或孔状的3DOM SiO2膜．     

Preparation of thin films comprising palladium nanoparticles by a solid-liquid interface reaction technique

A new approach to the formation of palladium nanoparticulate films with diameter between 6 and 50 nm by the solid-liquid interface reaction technique (SLIRT) has been presented. A solid film of palladium nitrate was formed by the modified spin coating method. This film is subsequently immersed in a reducing solution to initiate a reaction at the interface and ultimately transforms it to a palladium metal film. The kinetics of palladium reduction has been studied by UV-visible spectroscopy. The characterization of the palladium film has been performed by various physicochemical techniques such as XRD, ED, XPS, SEM, EDX, TEM, and UV-visible spectroscopy. The texture and morphology of the materials has been investigated by atomic force microscopy (AFM). At a constant palladium nitrate concentration, the average diameter of palladium nanoparticles decreases with an increase of hydrazine concentration. The effect of concentration of hydrazine on the particle size has been discussed. The palladium film formation mechanism has been proposed for the SLIRT.     

Nitrate absorption through hydrotalcite reformation

Thermally activated hydrotalcite based upon a Zn/Al hydrotalcite with carbonate in the interlayer has been used to remove nitrate anions from an aqueous solution resulting in the reformation of a hydrotalcite with a mixture of nitrate and carbonate in the interlayer. X-ray diffraction of the reformed hydrotalcites with a d(003) spacing of 7.60 A shows that the nitrate anion is removed within a 30 min period. Raman spectroscopy shows that two types of nitrate anions exist in the reformed hydrotalcite (a) nitrate bonded to the 'brucite-like' hydrotalcite surface and (b) aquated nitrate anion in the interlayer. Kinetically the nitrate is replaced by the carbonate anion over a 21 h period. Two types of carbonate anions are observed. This research shows that the reformation of a thermally activated hydrotalcite can be used to remove anions such as nitrate from aqueous systems.     

Influence of Nanoporosity and Roughness on the Thickness-Dependent Coercivity of Iron Nanonetworks

Summary.  We have studied the coercivity of magnetic nanonetworks as a function of thickness, nominal pore diameter, and surface/interface roughness in the thickness range of approximately 2 to 45 nm where a Néel-type domain wall has been theoretically predicted. Such magnetic nanonetworks have been prepared by sputtering iron on the walls of commercially available porous nano-channel alumina (NCA) membranes. The thickness dependence of coercivity has also been studied on films deposited on surface-oxidized Si and glass subtrates. These substrates are essentially non-porous and much smoother than NCAs. Our investigation shows that the coercivity of films deposited on Si and glass depends on the spatial fluctuation of thickness which arises from the roughness of the apparently smooth substrates. On the other hand, NCAs are found to be inherently quite rough, and films on NCAs show a complex thickness dependence which arises from the interplay between surface/interface roughness, domain pinning due to porosity, surface anisotropy, surface torques, and oxidation of the iron films. It was found that the growing films on NCA substrates led to partial filling up of the pore entrance, thereby reducing its effective diameter. The film growth also affects the roughness of the film, which in turn affects its coercivity. We propose a model for the thickness dependence of coercivity based on the pore fill-up geometry considering the effective pore diameter and the critical thickness at which the pore will be completely filled up. Experimental results on coercivity with thickness variation of iron network deposited on NCA generally agree with the suggested model. Received October 16, 2001. Accepted (revised) January 11, 2002     

甲烷二氧化碳重整反应中微量氧化镁助剂对Ni基催化剂抗积碳性能的影响（英文）

甲烷二氧化碳重整反应不仅可以将两种温室气体转化为更具有工业应用价值的合成气,而且反应产物中的H_2/CO比也比较适宜合成气的深加工过程,兼具环境效益和经济效益,因此受到广泛的关注与研究.但是,阻碍该过程工业化的主要问题在于反应中Ni基催化剂非常容易积碳,从而导致催化剂失活.近年来,甲烷二氧化碳催化重整领域的研究主要集中在反应机理和催化剂设计,其中大多数的研究结果表明,Ni基催化剂的抗积碳性能取决于反应过程中积碳速率与消碳速率之间的平衡.CO_2是该反应体系中唯一的氧源,因此Ni基催化剂的消碳能力在很大程度上取决于其对CO_2裂解活化能力的强弱.早期的文献中一般认为,CO_2的裂解活化与载体的Lewis碱性位点强弱相关,因此添加碱性氧化物助剂,比如MgO和CaO等,能够增强Ni基催化剂的碱性强度和CO_2吸附性能,有利于催化剂表面碳物种的转化,从而增强催化剂的稳定性.已有文献报道,添加微量MgO助剂(1 wt%)尽管没有影响Ni基催化剂的碱性强度,但是能够明显增强Ni基催化剂的稳定性,但没有对此结果给出明确的解释.在非均相催化研究领域中,活性金属与助剂在催化剂表面的分散性,是研究其催化作用的重要前提.大部分甲烷二氧化碳催化重整研究工作中,助剂的引入通常采用浸渍法,但是这种制备方法并不能有效保证助剂的分散度.本研究工作利用了水滑石材料的"记忆效应",将0.42 wt%Mg~(2+)引入到由Ni-Al水滑石前驱体焙烧后得到的Ni/Al_2O_3催化剂中.X射线能谱仪的结果表明,微量MgO助剂均匀分散在Ni/Al_2O_3催化剂表面上.经X射线衍射、CO_2程序升温脱附和H_2程序升温还原表征验证,添加微量的MgO助剂并没有对Ni晶粒尺寸、金属载体相互作用以及Al_2O_3载体表面碱性强度产生明显作用;然而甲烷二氧化碳重整活性评价测试和反应后催化剂的O2程序升温氧化实验结果显示,微量MgO助剂能明显增强Ni/Al_2O_3催化剂的稳定性,并且有效地阻碍了石墨碳在催化剂表面的形成.表面脉冲吸附实验结果证实,微量MgO助剂促进了CO_2在Ni颗粒表面的裂解活化,进而可以及时消除Ni金属表面由甲烷裂解产生的碳物种,防止其迁移、聚集和生成石墨碳.     

纳米ZnO薄膜的制备及其可见光催化降解甲基橙

采用溶胶-凝胶方法制备ZnO透明溶胶, 在铝箔上涂膜后经500 ℃处理制得具有可见光响应的纳米ZnO薄膜光催化剂. 以甲基橙模拟有机污染物, 在可见光下研究了薄膜的降解性能, 结果表明, 用一片有效面积为200 cm2的ZnO/Al薄膜作为催化剂, 甲基橙的降解率达到96.3％, 比ZnO负载在玻璃上制得的ZnO/glass薄膜催化剂活性高得多. 采用扫描电镜与原子力显微镜对ZnO/Al薄膜制备条件进行了表征, 结果发现多孔ZnO/Al薄膜比致密ZnO/Al薄膜具有更高的活性, 实验制备的具有高活性的ZnO/Al薄膜颗粒平均直径为52.2 nm. 采用本方法制备的ZnO/Al薄膜是一种具有应用前景的, 能在可见光下降解有机物的有效光催化剂.     

Controllable fabrication of porous free-standing polypyrrole films via a gas phase polymerization

A facile gas phase polymerization method has been proposed in this work to fabricate porous free-standing polypyrrole (PPy) films. In the presence of pyrrole vapor, the films are obtained in the gas/water interface spontaneously through the interface polymerization with the oxidant of FeCl(3) in the water. Both the thickness of the film and the size of the pores could be controlled by adjusting the concentrations of the oxidant and the reaction time. The as-prepared PPy films exhibited a superhydrophilic behavior due to its composition and porous structures. We have demonstrated a possible formation mechanism for the porous free-standing PPy films. This gas phase polymerization is shown to be readily scalable to prepare large area of PPy films.