Synthesis and Crystal Structure of Peptide‐2,2′‐Biphenyl Hybrids

1,1′‐Biphenyl derivatives with amino acid/peptide substitution at C(2) and C(2′) (‘peptide‐biphenyl hybrids', 6 – 8 ) have been prepared by direct N‐acylation of amino acid/peptide derivatives with 1,1′‐biphenyl‐2,2′‐dicarbonyl dichloride ( 5 ). Both conformers, which arise from the rotation around the aryl aryl bond, have been detected by ¹H‐NMR spectroscopy. Single atropisomers of each 6 ((R)‐configuration at the stereogenic axis) and 7 ((S)‐configuration at the stereogenic axis) have been obtained in quantitative yield by slow evaporation of methanolic solutions. The procedures are dynamic atropselective resolutions (asymmetric transformations of the second kind). The crystal structures of the peptide‐biphenyl hybrids 6 and 7 show highly ordered molecular and supramolecular structures with extensive intramolecular and intermolecular H‐bonding.     

Substituted 2,2′‐Bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyl Complexes of Zinc

The condensation reaction of 2,2′‐diamino‐4,4′‐dimethyl‐6,6'‐dibromo‐1,1′‐biphenyl with 2‐hydroxybenzaldehyde as well as 5‐methoxy‐, 4‐methoxy‐, and 3‐methoxy‐2‐hydroxybenzaldehyde yields 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyl ( 1a ) as well as the 5‐, 4‐, and 3‐methoxy‐substituted derivatives 1b , 1c , and 1d , respectively. Deprotonation of substituted 2,2′‐bis(salicylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls with diethylzinc yields the corresponding substituted zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐1,1′‐biphenyls ( 2 ) or zinc 2,2′‐bis(2‐oxidobenzylideneamino)‐4,4′‐dimethyl‐6,6′‐dibromo‐1,1′‐biphenyls ( 3 ). Recrystallization from a mixture of CH₂Cl₂ and methanol can lead to the formation of methanol adducts. The methanol ligands can either bind as Lewis base to the central zinc atom or as Lewis acid via a weak O–H ··· O hydrogen bridge to a phenoxide moiety. Methanol‐free complexes precipitate as dimers with central Zn₂O₂ rings.     

Functionalized 3,3′,5,5′‐Tetraaryl‐1,1′‐Biphenyls: Novel Platforms for Molecular Receptors

This paper describes the development of novel aromatic platforms for supramolecular construction. By the Suzuki cross‐coupling protocol, a variety of functionalized m‐terphenyl derivatives were prepared (Schemes 1–4). Macrolactamization of bis(ammonium salt) (S,S)‐ 6 with bis(acyl halide) 7 afforded the macrocyclic receptor (S,S)‐ 2 (Scheme 1), which was shown by ¹H‐NMR titration studies to form ‘nesting' complexes of moderate stability (K_a between 130 and 290 M ^?1, 300 K) with octyl glucosides 13 – 15 (Fig. 2) in the noncompetitive solvent CDCl₃. Suzuki cross‐coupling starting from 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl provided access to a novel series of extended aromatic platforms (Scheme 5) for cleft‐type (Fig. 1) and macrotricyclic receptors such as (S,S,S,S)‐ 1 . Although mass‐spectral evidence for the formation of (S,S,S,S)‐ 1 by macrolactamization between the two functionalized 3,3′,5,5′‐tetraaryl‐1,1′‐biphenyl derivatives (S,S)‐ 33 and 36 was obtained, the ¹H‐ and ¹³C‐NMR spectra of purified material remained rather inconclusive with respect to both purity and constitution. The versatile access to the novel, differentially functionalized 3,3′,5,5′‐tetrabromo‐1,1′‐biphenyl platforms should ensure their wide use in future supramolecular construction.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Isolation of a New Carotenoid and Two New Carotenoid Glycosides from Curtobacterium flaccumfaciens pvar poinsettiae

An efficient method for the extraction of the carotenoids from Curtobacterium flaccumfaciens pvar poinsettiae was developed. The glucosides of C.p. 450 (=(all‐E,2R,2′R)‐2‐[4‐(β‐D ‐glucopyranosyloxy)‐3‐methylbut‐2‐enyl]‐2′‐(4‐hydroxy‐3‐methylbut‐2‐enyl)‐β, β‐carotene; 4 ) and of C.p. 473 (=(all‐E,2R,2′S)‐2‐[4‐(β‐D ‐glucopyranosyloxy)‐3‐methylbut‐2‐enyl]‐2′‐(3‐methylbut‐2‐enyl)‐3′,4′‐didehydro‐1′,2′‐dihydro‐β,ψ‐caroten‐1′‐ol; 5 ) were isolated for the first time. In addition, the hitherto unknown 3′,4′‐dihydro derivative of C.p. 450, called C.p. 460 (=(all‐E,2R,2′R)‐2‐(4‐hydroxy‐3‐methylbut‐2‐enyl)‐2′‐(3‐methylbut‐2‐enyl)‐1′,2′‐dihydro‐β,ψ‐caroten‐1′‐ol; 6 ), was identified. The structures were established by UV/VIS, CD, ¹H‐ and ¹³C‐NMR, and mass spectra.     

Intricacies of ligand coordination in tricarbonylchromium(0) complexes with ortho‐ and para‐fluorobiphenyls

The steric and electronic factors that influence which of the two rings of a substituted biphenyl ligand coordinates to chromium are of interest and it has been suggested that haptotropic rearrangements within these molecules may be limited if the arene–arene dihedral angle is too large. Two tricarbonylchromium(0) complexes and their respective free ligands have been characterized by single‐crystal X‐ray diffraction. In the solid state, tricarbonyl[(1′,2′,3′,4′,5′,6′‐η)‐2‐fluoro‐1,1′‐biphenyl]chromium(0), [Cr(C₁₂H₉F)(CO)₃], (I), exists as the more stable isomer with the nonhalogenated arene ring ligated to the metal center. Similarly, tricarbonyl[(1′,2′,3′,4′,5′,6′‐η)‐4‐fluoro‐1,1′‐biphenyl]chromium(0) crystallizes as the more stable isomer with the phenyl ring bonded to the Cr⁰ center. The arene–arene dihedral angles in these complexes are 55.77 (4) and 52.4 (5)°, respectively. Structural features of these complexes are compared to those of the DFT‐optimized geometries of ten tricarbonyl[(η⁶‐C₆H₅)(4‐F‐C₆H₄)]chromium model complexes. The solid‐state structures of the free ligands 2‐fluoro‐1,1′‐biphenyl and 4‐fluoro‐1,1′‐biphenyl, both C₁₂H₉F, exhibit arene–arene dihedral angles of 54.83 (7) and 0.71 (8)°, respectively. The molecules of the free ligands occupy crystallographic twofold axes and exhibit positional disorder. Weak intermolecular C—H…F interactions are observed in all four structures.     

An Oxidative Rearrangement of 6‐Phenylbicyclo[3.2.0]heptan‐6‐ol to 1,1′‐Biphenyl‐Carbaldehydes: A Mechanistic Study

Acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]heptan‐6‐ol gave 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes in small amounts as well as the expected rearrangement products. A detailed study of the reaction mechanism revealed that the conversion occurs via an oxidative process through the consecutive formation of cycloheptadienes, cycloheptatrienes, and 1,1′‐biphenyls. The acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]hept‐2‐en‐6‐ols gave 1‐ and 2‐phenylcycloheptatrienes directly, from which 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes were obtained by oxidation.     

Quinoline derivatives: potential antiparasitic and antiviral agents

The crystal structures of closely related quinoline compounds substituted at the 2‐position by a vinyl group, either including a Cl atom [2‐(1‐chloro‐2‐methylprop‐1‐enyl)‐8‐nitroquinoline, C₁₃H₁₁ClN₂O₂, (I)] or not [2‐(2‐methylprop‐1‐enyl)‐8‐nitroquinoline, C₁₃H₁₂N₂O₂, (II)], show an important deviation of the vinyl group from coplanarity with the quinoline ring system if the Cl atom is present. The nitro group is perpendicular [in (II)] or nearly so [in (I)] to the quinoline ring system. In (II), all non‐H atoms except the nitro O atoms are located on a crystallographic mirror plane.     

An Unexpected Atropisomerically Stable 1,1‐Biphenyl at Ambient Temperature in Solution,Elucidated by Vibrational Circular Dichroism (VCD)

Biphenyls with only two substituents at the ‘peri'‐position normally show rotation about their chiral axis at room temperature. Using vibrational circular dichroism (VCD), we found no evidence for rotation of (P)‐2′‐[(4S)‐4,5‐dihydro‐4‐(1‐methylethyl)oxazol‐2‐yl][1,1′‐biphenyl]‐2‐methanol ((P,S)‐ 1 ) in CDCl₃ about its chiral axis due to stabilization by intramolecular H‐bonding. All rotamers of 1 were calculated at the DFT level, and, from these optimized structures, the VCD spectra were calculated and compared to the measured VCD spectra. The best agreement between calculated and measured spectra is obtained when two rotamers are present in solution. These rotamers differ primarily in their intramolecular H‐bonding interactions, having either OH???N (the form present in the solid state) or OH???O H‐bonds, i.e., a rotation of the heterocycle in 1 takes place in solution.     

Efficient gel‐type electrolyte with bismaleimide via in situ low temperature polymerization in dye‐sensitized solar cells

This study reports the characteristics of gel‐type dye‐sensitized solar cells (DSSCs), fabricated with gel‐type electrolyte containing poly‐1,1′‐(methylenedi‐4,1‐phenylene)bismaleimide (PBMI), or poly‐1,1′‐(3,3′‐dimethyl‐1,1′‐biphenyl‐4,4′‐diyl)bismaleimide (PDBBMI), or poly‐N,N′‐(4‐methyl‐1,3‐phenylene)bismaleimide (PMPBMI), prepared by in situ polymerization of the corresponding monomer without an initiator at 30 °C. Incorporating 0.3 wt % content of exfoliated alkyl‐modified nanomica (EAMNM) into PBMI‐gelled electrolyte leads to higher short‐circuit current density (J_sc = 17.14 mA cm^?2) and efficiency (η = 7.02%) than that of neat PBMI‐gel electrolyte (J_sc = 15.32 mA cm^?2, η = 6.41%). Incorporating 0.3 wt % EAMNM into PBMI‐gelled electrolyte results in remarkably stable device performance under continuous light soaking under one sun (100 mW cm^?2) at 55 °C. The efficiency of DSSCs based on PBMI/0.3 wt % EAMNM‐gelled electrolyte drops by only 1.7% (η = 6.93%) after 500 h of continuous light soaking. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

An Ultrastable and Easily Regenerated Hydrogen‐Bonded Organic Molecular Framework with Permanent Porosity

A robust hydrogen‐bonded organic framework HOF‐TCBP (H₄TCBP=3,3′,5,5′‐tetrakis‐(4‐carboxyphenyl)‐1,1′‐biphenyl) has been successfully constructed and structurally characterized. It possesses a permanent 3D porous structure with a 5‐fold interpenetrated dia topological network. This activated HOF‐TCBP has a high BET surface area of 2066 m² g⁻¹ and is capable of highly selective adsorption and separation of light hydrocarbons under ambient conditions. It shows excellent thermal stability, as demonstrated by PXRD experiments and N₂ adsorption tests. Practical use of HOF‐TCBP is facilitated by the ease of its preparation and renewal through rotary evaporation.     

Synthesis and electrochromic properties of triphenylamine containing copolymers: Effect of π‐bridge on electrochemical properties

In this study, a series of benzotriazole (BTz) and triphenylamine (TPA)‐based random copolymers; poly4‐(5‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P1 ), poly4′‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)‐N‐(4′‐methyl‐[1,1′‐biphenyl]‐4‐yl)‐N‐phenyl‐[1,1′‐biphenyl]‐4‐amine ( P2 ), and poly4‐(5′‐(2‐dodecyl‐7‐(5‐methylthiophen‐2‐yl)?2H‐benzo[d][1,2,3]triazol‐4‐yl)‐[2,2′‐bithiophen]‐5‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P3 ) were synthesized to investigate the effect of TPA unit and π‐bridges on electrochemical and spectroelectrochemical properties of corresponding polymers. The synthesis was carried out via Stille coupling for P1 , P3 , and Suzuki coupling for P2 . Electrochemical and spectral results showed that P1 has an ambipolar character, in other words it is both p‐type and n‐type dopable, whereas P2 and P3 have only p‐doping property. Effect of different π‐bridges and TPA unit on the HOMO and LUMO energy levels, switching time, and optical contrast were discussed. All polymers are promising materials for electrochromic devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 537–544     

The process of 4‐hydroxybiphenyl synthesis from 4‐isopropylbiphenyl

The kinetics of the oxidation of 4‐isopropylbiphenyl ( 1 ) in the liquid phase by oxygen to 1‐(1,1′‐biphenyl‐4‐yl)‐1‐methylethyl hydroperoxide ( 2 ) was investigated. The oxidizability of 1 in the temperature range from 60°C to 120°C and the overall energy activation of oxidation were determined. Long‐term oxidation of 1 to 2 in the temperature range of 80–120°C was investigated, and the yield and selectivity of the process were determined. Pure 2 was obtained, and its properties were defined. 4‐Hydroxybiphenyl was obtained as a result of the acidic decomposition of 2 . © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 527–532, 2008     

Modification Pathways for Copoly(2‐oxazoline)s Enabling Their Application as Antireflective Coatings in Photolithography

Chromophore‐functionalized copoly(2‐oxazoline)s are successfully evaluated as bottom antireflective coatings (BARCs) in high‐resolution photolithography. With respect to UV light sources used in photolithographic production routines, anthracene is chosen as a chromophore. For application as polymer in BARCs, the copolymer poly(2‐ethyl‐2‐oxazolin)₄₅‐stat‐poly(2‐dec‐9′‐enyl‐2‐oxazolin)₂₀‐stat‐poly(2‐(3′‐(1″‐(anthracen‐9‐ylmethyl)‐1″,2″,3″‐triazol‐4‐yl)propyl)‐2‐oxazolin)₃₅ can be synthesized by the Huisgen cycloaddition click reaction of the copolymer poly(2‐ethyl‐2‐oxazolin)₄₅‐stat‐poly(2‐dec‐9′‐enyl‐2‐oxazolin)₂₀‐stat‐poly(2‐pent‐4′‐inyl‐2‐oxazolin)₃₅ and the corresponding azide‐functionalized anthracenes. These copolymers can be crosslinked by the thermally induced thiol‐ene reaction involving the unsaturated C=C bonds of the poly(2‐dec‐9′‐enyl‐2‐oxazoline) repetition units and a multifunctional thiol as crosslinker. Tests of this BARC in a clean room under production conditions reveal a significant decrease of the swing‐curve of a chemically amplified positive photoresist by more than 50%, hence significantly increasing the resolution of the photoresist.

     

Synthesis and Ni(0)-catalyzed oligomerization of isomeric 4,4‴-dichloroquaterphenyls

4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ), 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ), and 4,4?-dichloro-1,1′ : 4′,1″ : 4″,1?-quaterphenyl ( 11 ) were synthesized by Pd (0) catalyzed cross-coupling reaction of 4-chlorobenzeneboronic acid with 2,2′-, 3,3′-, and 4,4′-bis (trifluoromethanesulfonyloxy)biphenyl respectively. 4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ) and 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ) were oligomerized by Ni(0) catalyzed homocoupling reaction to yield white and soluble oligophenylenes. © 1993 John Wiley & Sons, Inc.     

Unusual structure of a biphenyl fragment: the important role of weak interactions

1,5‐Bis([1,1′‐biphenyl]‐4‐yl)‐5‐hydroxy‐3‐methylheptane‐1,6‐dione, C₃₂H₃₀O₃, was investigated by X‐ray analysis, quantum chemical calculations and AIM (atoms in molecules) analysis. It was shown that four intramolecular C—H…π forces are established between the two biphenyl fragments. C—H…π interactions lead to a bending of the biphenyl part. The energy of the intramolecular interactions was estimated and the exclusive role of the moment of force was established.     

含联吡啶，Eu(III)或Gd(III)的手性高分子配合物的合成及荧光性质研究

手性高分子P–1由(R)-5,5′-二溴-6,6′-二(4-三氟甲基苯基)-2,2′-二正辛氧基-1,1′-联萘(R–M–1)和5,5′-二乙烯基-2,2′-联吡啶(M–2)通过Pd催化的Heck偶合反应合成得到,高分子配合物P-2和P-3由高分子P-1与Eu(TTA)3·2H2O和Gd(TTA)3·2H2O (TTA– = 2-噻吩甲酰三氟丙酮)反应生成。手性高分子P-1能发射强的蓝色荧光,这是由于手性重复单元(R)-6,6′-二(4-三氟甲基苯基)-2,2′-二正辛氧基-1,1′-联萘和单元2,2′-联吡啶通过亚乙烯基桥连形成共轭高分子结构造成的。在不同的激发波长激发下,含Eu(III)的高分子配合物P–2不仅显示高分子荧光,还可显示Eu(III) (5D0→7F2)特征荧光。含Gd(III)的高分子配合物P–3仅发射高分子荧光。基于高分子及含RE(III)的高分子配合物的荧光性质研究发现,共轭高分子并没有把能量转移到Eu(III)或Gd(III) 配合物部分,只发射它自身的荧光,含Eu(III)的高分子配合物P–2发射Eu(III) (5D0→7F2)特征荧光能量主要来源于配阴离子TTA–。     

Chromatographic Resolution,Circular Dichroism Spectra,Absolute Configurations,and Crystal Structures of Bridged Biphenyls,Containing Sulfide,Sulfoxide, and Sulfone Groups in the Bridge

Four chiral 1,1′‐biphenyls with one or two sulfur‐containing bridges in 2,2′‐ or 2,2′‐ and 6,6′‐positions, viz. 1,11‐dimethyl‐5,7‐dihydrodibenzo[c,e]thiepin ( 1 ), its S‐oxide ( 2 ) and S,S‐dioxide ( 3 ), and the doubly bridged 10,12‐dihydro‐4H,6H‐[2]benzothiepino[6,5,4‐def][2]benzothiepin ( 4 ) have been studied by chromatography, CD spectroscopy, X‐ray crystallography, and empirical force‐field and CNDO/S calculations. The structures obtained by force‐field calculations showed good agreement with the crystal structures determined for 2 and 3 . Compounds 2 , 3 , and 4 , but not 1 , could be resolved into enantiomers by chromatography on swollen microcrystalline triacetylcellulose. The barrier for biphenyl inversion in 2 was found to be higher than 167 kJ⋅mol⁻¹ by an attempted thermal racemization. The CD spectra of the enantiomers of 2 – 4 were recorded and resolved into individual bands, and the corresponding rotational strengths were calculated. The transitions showed considerable similarity to those of a 1,1′‐biphenyl with hydrocarbon bridge (cf. 5 ), albeit with bathochromic shifts, which permitted the assignment of the absolute configurations of the enantiomers of 2 – 4 . The assignments were supported by comparison of the experimental CD spectra with spectra calculated by the CNDO/S method. All first‐eluted enantiomers were found to have the (S)‐configuration.     

Mixed dicationic and monocationic benzidine species in the proton‐transfer compound of benzidine with 3,5‐dinitro­salicylic acid

The crystal structure of the proton‐transfer compound of 1,1′‐biphenyl‐4,4′‐diamine (benzidine) with 3,5‐dinitro­salicylic acid, viz. 1,1′‐biphenyl‐4,4′‐diaminium bis­(4′‐amino‐1,1′‐bi­phenyl‐4‐aminium) tetra­kis(2‐carb­oxy‐4,6‐dinitro­phenol­ate) ethanol disolvate, C₁₂H₁₄N₂²⁺·2C₁₂H₁₃N₂⁺·4C₇H₃N₂O₇⁻·2C₂H₆O, shows the presence of both diprotonated and monoprotonated benzidine cations. The diprotonated species lie across crystallographic inversion centres in the unit cell, while the monoprotonated species occupy general sites. All amine H atoms participate in hydrogen bonding with carboxyl, phenolate and nitro O‐atom acceptors of the salicylate anions, which also participate in hydrogen bonding with the disordered ethanol solvent mol­ecules. Significant inter‐ring anion–anion and anion–monocation π–π inter­actions are also present, giving a three‐dimensional framework structure.     

Heterogeneous Aromatic Amination of Aryl Halides with Arylamines in Water with PS‐PEG Resin‐Supported Palladium Complexes

Catalytic aromatic amination is achieved in water under heterogeneous conditions by the use of immobilized palladium complexes coordinated with the amphiphilic polystyrene‐poly(ethylene glycol) resin‐supported di(tert‐butyl)phosphine ligand. Aromatic amination of aryl halides with diphenylamine and N,N‐double arylation of anilines with bromobenzene were found to proceed in water with broad substrate tolerance to give the triarylamines in high yield with high recyclability of the polymeric catalyst beads. Very little palladium leached from the polymeric catalyst under the water‐based reaction conditions to provide a green and clean (metal‐uncontaminated) protocol for the preparation of triarylamines, including the optoelectronically active N,N,N′,N′‐tetraaryl‐1,1′‐biphenyl‐4,4′‐diamines (TPDs).