A Facile Synthesis of Novel (Z)‐ethyl‐3‐(5‐substituted‐1‐alkyl/aryl‐1H‐indol‐3‐yl)‐2‐(1H‐tetrazol‐5‐yl)acrylate

A novel route was developed for synthesis of high potential 1H‐tetrazoles by using conventional method. Tetrazole scaffold is a promising pharmacophore fragment, frequently used in the development of various novel drugs. Here, the novel (Z)‐3‐(N‐alkyl‐indol‐3‐yl)‐2‐(1H‐tetrazole‐5‐yl)acrylates 5 ( a – i ) have been synthesized from (Z)‐ethyl‐3‐(1H‐indol‐3‐yl)2‐(1H‐tetrazol‐5‐yl)acrylates 4 ( a – c ) by using various alkylating agents such as Dimethyl Sulphate (DMS), Diethyl Sulphate (DES), and benzyl chloride; 4 ( a – c ) were synthesized from sodium azide in the presence of copper sulfate in dimethylformamide; 3 ( a – c ) have been prepared by Knoevenagel condensation of indole‐3‐carbaldehyde 1 ( a – c ) and ethylcyanoacetate 2 in the presence of L‐Proline as a catalyst at room temperature in ethanol for an hour. This is an efficient and clean click chemistry method that has various advantages such as easy workup, higher yields, shorter reaction times, and more economical.     

An Efficient Two‐Step Synthesis of New 5‐Substituted‐1H‐tetrazoles of Biological Interest

A simple procedure for the synthesis and characterization of new 3‐alkoxy‐3‐(1H‐tetrazol‐5‐yl)propionic acids and 2‐(1H‐tetrazol‐5‐yl)tetrahydrofuran‐ and ‐(1H‐tetrazol‐5‐yl)‐2H‐pyran‐3‐carboxylic acids from the [2 + 3] cycloaddition reactions between the nitrile group of β‐cyanocarboxylic acids with sodium azide in the presence of zinc chloride is described. The tetrazolic acids were isolated in moderate to good yields and are structurally analogous to succinic acid.     

Coordination Architectures of Lanthanum Complexes Based on Bifunctional 5‐Substituted Tetrazolecarboxylate Ligands

Three complexes of bifunctional 5‐substituted tetrazolatecarboxylate ligands [2‐(5‐(pyrazin‐2‐yl)‐2H‐tetrazol‐2‐yl)acetic acid (Hpztza), 3‐(5‐amino‐2H‐tetrazol‐1(5H)‐yl)propanoic acid (Hatzp), and N,N′‐bis(tetrazol‐5‐yl)anime‐N2,N2′‐diacetic acid (H₂datza)], namely a mononuclear structure [La(pztza)₂(H₂O)₅] · 4H₂O · pztza ( 1 ), a 1D polymeric chain structure [La₂(atzp)₄(H₂O)₈] · 2NO₃ · 2H₂O ( 2 ), and a 2D layer network [La(datza)(H₂O)₃] · 4H₂O ( 3 ) were prepared and structurally characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction. The structures of these complexes are controlled not only by the number and different coordination modes of the tetrazole‐carboxylate ligands but also the different 5‐substituents of the tetrazole ring. The complexes show ligand‐centered luminescence at room temperature in the solid state. The obvious enhancements in luminescence make these complexes to be the potential materials for optical use.     

5‐(1,2,3‐Triazol‐1‐yl)tetrazole Derivatives of an Azidotetrazole via Click Chemistry

N? C bonded (non‐bridged) 5‐(1,2,3‐triazol‐1‐yl)tetrazoles were synthesized by the Cu^I‐catalyzed 1,3‐dipolar azide–alkyne cycloaddition click reaction using 5‐azido‐N‐(propan‐2‐ylidene)‐1H‐tetrazole ( 1 ). For example, the click reaction of 1 in the presence of CuSO₄?5 H₂O and Na ascorbate at 65–70 °C for 48 h in CH₃CN/H₂O co‐solvent was found to be limited to only terminal alkynes that have electron‐withdrawing groups, CF₃C?CH ( 2 a ) and SF₅C?CH ( 2 b ), giving rise to isopropylidene‐[5‐(4‐trifluoromethyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 a ) and isopropylidene‐[5‐(4‐pentafluorosulfanyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 b ) in 47 % and 66 % yields, respectively. When carried out under conditions using CuI and 2,6‐lutidine as catalysts at 0 °C for 13 h in CHCl₃, the click reaction was versatile toward alkynes even those having electron‐donating groups. Properties of new products were determined and compared with those of 1 . Heats of formation, detonation pressures, detonation velocities and impact sensitivities are reported for these new 5‐(1,2,3‐triazol‐1‐yl)tetrazoles.     

Two derivatives of 1,5‐disubstituted tetrazoles: 1‐(4‐nitrophenyl)‐1H‐tetrazol‐5‐amine and {(E)‐[1‐(4‐ethoxyphenyl)‐1H‐tetrazol‐5‐yl]iminomethyl}dimethylamine

The geometric features of 1‐(4‐nitrophenyl)‐1H‐tetrazol‐5‐amine, C₇H₆N₆O₂, correspond to the presence of the essential interaction of the 5‐amino group lone pair with the π system of the tetrazole ring. Intermolecular N—H...N and N—H...O hydrogen bonds result in the formation of infinite chains running along the [110] direction and involve centrosymmetric ring structures with motifs R₂²(8) and R₂²(20). Molecules of {(E)‐[1‐(4‐ethoxyphenyl)‐1H‐tetrazol‐5‐yl]iminomethyl}dimethylamine, C₁₂H₁₆N₆O, are essentially flattened, which facilitates the formation of a conjugated system spanning the whole molecule. Conjugation in the azomethine N=C—N fragment results in practically the same length for the formal double and single bonds.     

A new three‐dimensional CdII supramolecular framework constructed from the 1‐[(1H‐tetrazol‐5‐yl)methyl]‐1,4‐diazoniabicyclo[2.2.2]octane ligand

A new tetrazole–metal supramolecular compound, di‐μ‐chlorido‐bis(trichlorido{1‐[(1H‐tetrazol‐5‐yl‐κN²)methyl]‐1,4‐diazoniabicyclo[2.2.2]octane}cadmium(II)), [Cd₂(C₈H₁₆N₆)₂Cl₈], has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. In the structure, each Cd^II cation is coordinated by five Cl atoms (two bridging and three terminal) and by one N atom from the 1‐[(1H‐tetrazol‐5‐yl)methyl]‐1,4‐diazoniabicyclo[2.2.2]octane ligand, adopting a slightly distorted octahedral coordination geometry. The bridging bicyclo[2.2.2]octane and chloride ligands link the Cd^II cations into one‐dimensional ribbon‐like N—H...Cl hydrogen‐bonded chains along the b axis. An extensive hydrogen‐bonding network formed by N—H...Cl and C—H...Cl hydrogen bonds, and interchain π–π stacking interactions between adjacent tetrazole rings, consolidate the crystal packing, linking the poymeric chains into a three‐dimensional supramolecular network.     

An Efficient Synthesis of 3‐(1H‐Tetrazol‐5‐yl)coumarins (=3‐(1H‐Tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) via Domino Knoevenagel Condensation,Pinner Reaction,and 1,3‐Dipolar Cycloaddition in Water

A novel straightforward synthesis of 3‐(1H‐tetrazol‐5‐yl)coumarins (=3‐(1H‐tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) 6 via domino Knoevenagel condensation, Pinner reaction, and 1,3‐dipolar cycloaddition of substituted salicylaldehydes (=2‐hydroxybenzaldehydes), malononitrile (propanedinitrile), and sodium azide in H₂O is reported (Scheme 1 and Table 2). This general protocol provides a wide variety of 3‐(1H‐tetrazol‐5‐yl)coumarins in good yields under mild reaction conditions.     

Synthesis of 1,3,4‐Oxadiazole Acyclo C‐Nucleosides Bearing 5‐Methylthio{7‐substituted‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}moieties

Oxidative cyclization of the sugar hydrazones ( 3_a‐f ) derived from {7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐ylsulfanyl}acetic acid hydrazide ( 1 ) and aldopentoses 2_a‐c or aldohexoses 2_d‐f with bromine in acetic acid in the presence of anhydrous sodium acetate, followed by acetylation with acetic anhydride gave the corresponding 2‐(per‐O‐acetyl‐alditol‐l‐yl)‐5‐methylthio{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 5_a‐f ). Condensative cyclization of the sugar hydrazones ( 3_a‐f ) by heating with acetic anhydride gave the corresponding 3‐acetyl‐2‐(per‐O‐acetyl‐alditol‐1‐yl)‐2,3‐dihydro‐5‐methylthio{7‐acetyl‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 11_a‐f ). De‐O‐acetylation of the acyclo C‐nucleoside peracetates ( 5 and 11 ) with methanolic ammonia afforded the hydrazono lactones ( 7 ) and the acyclo C‐nucleosides ( 12 ), respectively. The structures of new oxadiazole derivatives were confirmed by analytical and spectral data.     

Novel Bis(2‐(5‐((5‐phenyl‐1H‐tetrazol‐1‐yl)methyl)‐4H‐1,2,4‐triazol‐3‐yl)phenoxy)Alkanes: Synthesis and Characterization

In this study, 10 different substituted aromatic bis‐benzaldehydes were synthesized by treating hydroxy benzaldehydes with various dihaloalkanes. Bis aldehydes 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j were treated with 2‐(5‐phenyl‐1H‐tetrazole‐1‐yl)acetohydrazide ( 3 ) in acidic medium and in the presence of ammonium acetate to yield a series of new isomeric bis(2‐(5‐((5‐phenyl‐1H‐tetrazol‐1‐yl)methyl)‐4H‐1,2,4‐triazol‐3‐yl)phenoxy)alkanes ( 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j ) in excellent to good yield. The newly synthesized compounds were characterized by the available spectroscopic analysis.     

Reliable Chemical Synthesis of Oligoribonucleotides (RNA) with 2′‐O‐[(Triisopropylsilyl)oxy]methyl(2′‐O‐tom)‐Protected Phosphoramidites

A method for the introduction of the 2′‐O‐[(triisopropylsilyl)oxy]methyl (=tom) group into N‐acetylated, 5′‐O‐dimethoxytritylated ribonucleosides is presented. The corresponding 2′‐O‐tom‐protected phosphoramidite building blocks were obtained in pure form and were successfully employed for the routine synthesis of oligoribonucleotides on DNA synthesizers. Under DNA coupling conditions (2.5 min coupling time for a 1.5‐μmol synthesis scale) and with 5‐(benzylthio)‐1H‐tetrazole (BTT) as activator, 2′‐O‐tom‐protected phosphoramidites exhibited average coupling yields >99.4%. The combination of N‐acetyl and 2′‐O‐tom protecting groups allowed a reliable and complete two‐step deprotection, first with MeNH₂ in EtOH/H₂O and then with Bu₄NF in THF, without concomitant destruction of the product RNA sequences.     

The heterobifunctional ligand 5‐[4‐(1,2,4‐triazol‐4‐yl)phenyl]‐1H‐tetrazole and its role in the construction of a CdII metal–organic chain structure

5‐[4‐(1,2,4‐Triazol‐4‐yl)phenyl]‐1H‐tetrazole, C₉H₇N₇, (I), an asymmetric heterobifunctional organic ligand containing triazole (tr) and tetrazole (tz) termini linked directly through a 1,4‐phenylene spacer, crystallizes in the polar space group Pc. The heterocyclic functions, serving as single hydrogen‐bond donor (tz) or acceptor (tr) units, afford hydrogen‐bonded zigzag chains with no crystallographic centre of inversion. In the structure of catena‐poly[[diaquacadmium(II)]bis{μ₂‐5‐[4‐(1,2,4‐triazol‐4‐yl)phenyl]tetrazol‐1‐ido‐κ²N¹:N^1′}], [Cd(C₉H₆N₇)₂(H₂O)₂]_n, (II), the Cd^II dication resides on a centre of inversion in an octahedral {N₄O₂} environment. In the equatorial plane, the Cd^II polyhedron is built up from four N atoms of two kinds, namely of trans‐coordinating tr and tz fragments [Cd—N = 2.2926 (17) and 2.3603 (18) Å], and the coordinating aqua ligands occupy the two apical sites. The metal centres are separated at a distance of 11.1006 (7) Å by means of the double‐bridging tetrazolate anion, L⁻, forming a chain structure. The water ligands and tz fragments interact with one another, like a double hydrogen‐bond donor–acceptor synthon, leading to a hydrogen‐bonded three‐dimensional array.     

A three‐dimensional cadmium(II) coordination polymer with unequal homochiral double‐stranded concentric helical chains

A homochiral helical three‐dimensional coordination polymer, poly[[(μ₂‐acetato‐κ³O,O′:O)(hydroxido‐κO)(μ₄‐5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ido‐κ⁵N¹,O:N²:N⁴:N⁵)(μ₃‐5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ido‐κ⁴N¹,O:N²:N⁴:N⁵)dicadmium(II)] 0.75‐hydrate], {[Cd₂(C₇H₅N₆O)₂(CH₃COO)(OH)]·0.75H₂O}_n, was synthesized by the reaction of cadmium acetate, N‐(1H‐tetrazol‐5‐yl)isonicotinamide (H‐NTIA), ethanol and H₂O under hydrothermal conditions. The asymmetric unit contains two crystallographically independent Cd^II cations, two deprotonated 5‐nicotinamido‐1H‐1,2,3,4‐tetrazol‐1‐ide (NTIA⁻) ligands, one acetate anion, one hydroxide anion and three independent partially occupied water sites. The two Cd^II cations, with six‐coordinated octahedral and seven‐coordinated pentagonal bipyramidal geometries are located on general sites. The tetrazole group of one symmetry‐independent NTIA⁻ ligand links one of the independent Cd^II cations into 6₁ helical chains, while the other NTIA⁻ ligand links the other independent Cd^II cations into similar but unequal 6₁ helical chains. These chains, with a pitch of 24.937 (5) Å, intertwine into a double‐stranded helix. Each of the double‐stranded 6₁ helices is further connected to six adjacent helical chains through an acetate μ₂‐O atom and the tetrazole group of the NTIA⁻ ligand into a three‐dimensional framework. The helical channel is occupied by the isonicotinamide groups of NTIA⁻ ligands and two helices are connected to each other through the pyridine N and carbonyl O atoms of isonicotinamide groups. In addition, N—H...O and O—H...N hydrogen bonds exist in the complex.     

The Chemistry of 5‐(Tetrazol‐1‐yl)‐2H‐tetrazole: An Extensive Study of Structural and Energetic Properties

5‐(Tetrazol‐1‐yl)‐2H‐tetrazole ( 1 ), or 1,5′‐bistetrazole, was synthesized by the cyclization of 5‐amino‐1H‐tetrazole, sodium azide and triethyl orthoformate in glacial acetic acid. A derivative of 1 , 2‐methyl‐5‐(tetrazol‐1‐yl)tetrazole ( 2 ) can be obtained by this method starting from 5‐amino‐2‐methyl‐tetrazole. Furthermore, selected salts of 1 with nitrogen‐rich and metal (alkali and transition metal) cations, including hydroxylammonium ( 4 ), triaminoguanidinium ( 5 ), copper(I) ( 8 ) and silver ( 9 ), as well as copper(II) complexes of both 1 and 2 were prepared. An intensive characterization of the compounds is given, including vibrational (IR, Raman) and multinuclear NMR spectroscopy, mass spectrometry, DSC and single‐crystal X‐ray diffraction. Their sensitivities towards physical stimuli (impact, friction, electrostatic) were determined according to Bundesamt für Materialforschung (BAM) standard methods. Energetic performance (detonation velocity, pressure, etc.) parameters were calculated with the EXPLO5 program, based on predicted heats of formation derived from enthalpies computed at the CBS‐4M level of theory and utilizing the atomization energy method. From the analytical and calculated data, their potential as energetic materials in different applications was evaluated and discussed.     

(2′‐O‐Methyl‐RNA)‐3′‐PNA Chimeras: A New Class of Mixed Backbone Oligonucleotide Analogues with High Binding Affinity to RNA

The automated on‐line synthesis of DNA‐3′‐PNA chimeras 1 – 4 and (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras 5 – 8 is described, in which the 3′‐terminal part of the oligonucleotide is linked to the N‐terminal part of the PNA via N‐(ω‐hydroxyalkyl)‐N‐[(thymin‐1‐yl)acetyl]glycine units (alkyl=Et, Ph, Bu, and pentyl). By means of UV thermal denaturation, the binding affinities of all chimeras were directly compared by determining their T_m values in the duplex with complementary DNA and RNA. All investigated DNA‐3′‐PNA chimeras and (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras form more‐stable duplexes with complementary DNA and RNA than the corresponding unmodified DNA. Interestingly, a N‐(3‐hydroxypropyl)glycine linker resulted in the highest binding affinity for DNA‐3′‐PNA chimeras, whereas the (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras showed optimal binding with the homologous N‐(4‐hydroxybutyl)glycine linker. The duplexes of (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras and RNA were significantly more stable than those containing the corresponding DNA‐3′‐PNA chimeras. Surprisingly, we found that the charged (2′‐O‐methyl‐RNA)‐3′‐PNA chimera with a N‐(4‐hydroxybutyl)glycine‐based unit at the junction to the PNA part shows the same binding affinity to RNA as uncharged PNA. Potential applications of (2′‐O‐methyl‐RNA)‐3′‐PNA chimeras include their use as antisense agents acting by a RNase‐independent mechanism of action, a prerequisite for antisense‐oligonucleotide‐mediated correction of aberrant splicing of pre‐mRNA.     

Synthesis,Photophysical and Computational Study of Novel Coumarin‐based Organic Dyes

A series of novel coumarin pyrazoline moieties combined with tetrazoles, 3‐(1‐phenyl‐4‐(1H‐tetrazol‐5‐yl)‐1H‐pyrazol‐3‐yl)‐2H‐chromen‐2‐one , 6‐chloro‐3‐(1‐phenyl‐4‐(1H‐tetrazol‐5‐yl)‐1H‐pyrazol‐3‐yl)‐2H‐chromen‐2‐one , 6‐bromo‐3‐(1‐phenyl‐4‐(1H‐tetrazol‐5‐yl)‐1H‐pyrazol‐3‐yl)‐2H‐chromen‐2‐one and 6‐bromo‐3‐(1‐(4‐bromophenyl)‐4‐(1H‐tetrazol‐5‐yl)‐1H pyrazol‐3‐yl)‐2H‐chromen‐2‐one 7(a‐d), were designed and synthesized. Single crystal X‐ray diffraction and their interactions were studied by Hirshfeld surface analysis. Thermal stabilities and electrochemical properties of these compounds were examined from differential scanning calorimetry (DSC ), thermogravimetric (TGA ) and cyclic voltammetric (CV ) studies. Their spectroscopic properties were analyzed in various alcohols and general solvents by UV–Vis absorption, fluorescence and time‐resolved spectroscopy. In addition, the ground and excited state electronic properties were investigated using density functional theory (DFT ). The calculated highest occupied molecular orbital (HOMO ) and lowest unoccupied molecular orbital (LUMO ) and energy band gap (E _g ) values have revealed the effect of substitution of halogens. The substitution has equally affected the ground and excited states of 7(a‐d) compounds. The solvatochromism on absorption, fluorescence spectra and fluorescence lifetimes of these compounds was investigated. All these results showed the chromen‐2‐one of pyrazoline tetrazole derivatives could play an important role in photonic and electronic devices.     

Trityl losartan

The title compound (systematic name: {2‐butyl‐4‐chloro‐1‐[2′‐(2‐trityl‐2H‐tetrazol‐5‐yl)­bi­phenyl‐4‐yl­methyl]‐1H‐imidazol‐5‐yl}­methanol), C₄₁H₃₇ClN₆O, crystallizes in the centrosymmetric space group P with two independent mol­ecules in the asymmetric unit. These mol­ecules differ significantly only in the relative orientations of the rings in the bi­phenylyl­tetrazole moieties. One of the mol­ecules shows disorder for three C atoms in the n‐butyl group. Hydro­gen bonds link the mol­ecules in an infinite chain along the a axis.     

A one‐dimensional silver(I) coordination polymer based on an asymmetric flexible N‐donor carboxylate ligand: catena‐poly[(μ3‐4‐{[(1‐phenyl‐1H‐tetrazol‐5‐yl)sulfanyl]methyl}benzoato‐κ3O:O′:N4)silver(I)]

The title compound, [Ag(C₁₅H₁₁N₄O₂S)]_n, was synthesized by the reaction of 4‐{[(1‐phenyl‐1H‐tetrazol‐5‐yl)sulfanyl]methyl}benzoic acid (Hptmba) with silver nitrate and triethylamine at room temperature. The asymmetric unit contains one crystallographically independent Ag^I cation and one ptmba⁻ ligand. Each Ag^I cation is tricoordinated by two carboxylate O atoms and one tetrazole N atom from three different ptmba⁻ ligands, displaying a distorted T‐shaped geometry. Three Ag^I cations are linked by tris‐monodentate bridging ptmba⁻ ligands to form a one‐dimensional double chain along the c axis, which is further consolidated by an intrachain π–π contact with an offset face‐to‐face distance of 4.176 (3) Å between the centroids of two adjacent aromatic rings in neighbouring benzoate groups. The one‐dimensional chains are linked into a three‐dimensional supramolecular framework by additional π–π interchain interactions, viz. of 3.753 (3) Å between two phenyl substituents of the tetrazole rings and of 4.326 (2) Å between a benzoate ring and a tetrazole ring. Thermogravimetric analysis and the fluorescence spectrum of the title compound reveal its good thermal stability and a strong green luminescence at room temperature.     

A one‐dimensional zinc(II) coordination polymer based on mixed multidentate N‐ and O‐donor ligands

In the title coordination polymer, catena‐poly[[bis[{1‐[(1H‐benzimidazol‐2‐yl‐κN³)methyl]‐1H‐tetrazole}zinc(II)]‐bis(μ₄‐pentane‐1,5‐dioato‐1:2:1′:2′κ⁴O¹:O^1′:O⁵:O^5′)] methanol disolvate], {[Zn(C₅H₆O₄)(C₉H₈N₆)]·CH₃OH}_n, each Zn^II ion is five‐coordinated by four O atoms from four glutarate ligands and by one N atom from a 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligand, leading to a slightly distorted square‐pyramidal coordination environment. Two Zn^II ions are linked by four bridging glutarate carboxylate groups to generate a dinuclear [Zn₂(CO₂)₄] paddle‐wheel unit. The dinuclear units are further connected into a one‐dimensional chain via the glutarate ligands. The bimt ligands coordinate to the Zn^II ions in a monodentate mode and are pendant on both sides of the main chain. In the crystal, the chains are linked by O—H...O and N—H...O hydrogen bonds into a two‐dimensional layered structure. Adjacent layers are further packed into a three‐dimensional network through van der Waals forces. A thermogravimetric analysis was carried out and the photoluminescent behaviour of the polymer was investigated.     

Synthesis of Some New Heterobicyclic Nitrogen Systems Bearing 7H‐1,2,4‐Triazolo[1,5‐d]tetrazol‐6‐yl Moiety for Biological Interest

Reaction of 6‐mercapto‐7H‐1,2,4‐triazolo[1,5‐d]tetrazole ( 1 ) wtih 1,2‐phenylenediamine afforded N‐{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,2‐phenylenediamine which was cyclized to benzimidazolyl‐1,2,4‐triazolo[1,5‐d]tetrazoles using various one‐carbon cyclizing agents. Also, the treatment of 1 with maleic anhydride or phthalic anhydride gave the corresponding thio derivatives followed by hydrazinolysis to afford the thio heterobicyclic systems. Former structures of the products have been established upon elemental and spectral analyses.     

A two‐dimensional layered CdII coordination polymer with a three‐dimensional supramolecular architecture incorporating mixed multidentate N‐ and O‐donor ligands

The combination of N‐heterocyclic and multicarboxylate ligands is a good choice for the construction of metal–organic frameworks. In the title coordination polymer, poly[bis{μ₂‐1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole‐κ²N³:N⁴}(μ₄‐butanedioato‐κ⁴O¹:O^1′:O⁴:O^4′)(μ₂‐butanedioato‐κ²O¹:O⁴)dicadmium], [Cd(C₄H₄O₄)(C₉H₈N₆)]_n, each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from three carboxylate groups of three succinate (butanedioate) ligands and two N atoms from two 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligands. Cd^II ions are connected by two kinds of crystallographically independent succinate ligands to generate a two‐dimensional layered structure with bimt ligands located on each side of the layer. Adjacent layers are further connected by hydrogen bonding, leading to a three‐dimensional supramolecular architecture in the solid state. Thermogravimetric analysis of the title polymer shows that it is stable up to 529 K and then loses weight from 529 to 918 K, corresponding to the decomposition of the bimt ligands and succinate groups. The polymer exhibits a strong fluorescence emission in the solid state at room temperature.