Synthesis of some symmetrically substituted compounds derived from 1,3‐bis(6‐azauracil‐1‐yl)benzene and 1,3,5‐tris(6‐azauracil‐1‐yl)benzene

The 3,5‐bis(5‐carboxy‐6‐azauracil‐1‐yl)aniline ( 7 ) and 1,3,5‐tris(5‐carboxy‐6‐azauracil‐1‐yl)benzene ( 10 ) were prepared from 3‐amino‐5‐nitroacetanilide ( 1 ) via intermediates 2–6 . A series of other substituted 6‐azauracil derivatives 9, 11‐14 were also prepared.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

[Sm(NO3)3(TPTZ)(H2O)]·2H2O [TPTZ is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]

The title compound, aqua­tris­(nitrato)[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]samarium dihydrate, [Sm(NO₃)₃­(C₁₈H₁₂N₆)­(H₂O)]·­2H₂O, was prepared from Sm(NO₃)₃·6H₂O and 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine. The metal atom is ten‐coordinate being bonded to the terdentate TPTZ ligand, three bidentate nitrates and a water mol­ecule.     

Ru catalyzed cyclodimerization of bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene. Synthesis properties of 4,5,6‐tris(2‐thienyl)benzo(b)thiophene and 5,6,7‐tris(3‐thienyl)benzo[b]thiophene

Activated dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the cyclodimerization of both bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene to yield, respectively, 4,5,6‐tris(2′‐thienyl)‐benzo[b]thiophene and 5,6,7‐tris(3′‐thienyl)benzo[b]thiophene. These fluoresce in the blue. Both undergo irreversible one electron oxidation at & sim1.1 mV versus Ag/Ag⁺ electrode, consistent with oxidation of the benzo[b]thiophene nuclei rather than the substituent thiophene rings.     

Halogenation of Fluorinated 1,3,5‐Triketones

The behavior of linear and cyclic fluorinated 1,3,5‐triketones and their metal derivatives towards common halogenating agents was examined, and optimal reaction conditions for the straightforward synthesis of mono‐, di‐, and tetrahalogenated products were found (Schemes 1–3). An aromatization through a double HBr elimination from an α,α′‐dibrominated cyclohexanone was shown to be a promising synthetic route to 1,1′‐(2‐hydroxy‐1,3‐phenylene)bis[2,2,2‐trifluoroethanones] (= 2,6‐bis(trifluoroacetyl)phenols; Scheme 4). Additionally, the 1,3,5‐triketones prepared add readily H₂O or alcohols to produce novel bridged 2,6‐dihydroxypyran‐4‐ones (Scheme 2). The structure of the obtained compounds 6a and 7a was confirmed by X‐ray structure analysis.     

Synthesis of a Novel Triheterocyclic Framework via 1,3‐Dipolar Cycloaddition of a Nitrile Oxide with Imidazo[2,1‐b][1,3]thiazole‐3(2H)‐ones

A novel series of (9Z)‐9‐arylmethylidene‐3‐(2,6‐dichlorophenyl)‐5,6‐dihydro[1,3]thiazolo[2′,3′:2,3]imidazo [1,2‐d][1,2,4]oxadiazol‐8(9H)‐one derivatives were prepared in moderate yields by the 1,3‐dipolar cycloaddition reaction of a nitrile oxide with (2Z)‐2‐arylmethylidene‐5,6‐dihydroimidazo [2,1‐b][1,3]thiazol‐3(2H)‐ones. The reaction site of the dipolarphile is the C═N of imidazo[2,1‐b][1,3]thiazole rather than the expected C═C of the arylmethylidene. The product structures were characterized thoroughly by IR, MS, NMR spectroscopy, and elemental analysis. The results indicate that this reaction proceeds with chemoselectivity and regioselectivity.     

Crystallographic report: Chloro[1,3‐bis[2‐[2‐[(4‐methoxybenzyl) amino]ethylamino]]‐2‐propanol]zinc(II) chloride hydrate, [(C23H36N4O3)ZnCl]Cl·H2O

The zinc(II) center in the molecule of [(C₂₃H₃₆N₄O₃)ZnCl]Cl·H₂O is coordinated by four nitrogen atoms of HL (1,3‐bis[2‐[2‐[(4‐methoxybenzyl) amino]ethylamino]]‐2‐propanol) and one chloro anion. The coordination moieties are connected by hydrogen bonds to form a one‐dimensional structure. Copyright © 2005 John Wiley & Sons, Ltd.     

The ESI CAD fragmentations of protonated 2,4,6‐tris(benzylamino)‐ and tris(benzyloxy)‐1,3,5‐triazines involve benzyl–benzyl interactions: a DFT study

The electrospray ionization collisionally activated dissociation (CAD) mass spectra of protonated 2,4,6‐tris(benzylamino)‐1,3,5‐triazine (1) and 2,4,6‐tris(benzyloxy)‐1,3,5‐triazine (6) show abundant product ion of m/z 181 (C₁₄H₁₃⁺). The likely structure for C₁₄H₁₃⁺ is α‐[2‐methylphenyl]benzyl cation, indicating that one of the benzyl groups must migrate to another prior to dissociation of the protonated molecule. The collision energy is high for the ‘N’ analog (1) but low for the ‘O’ analog (6) indicating that the fragmentation processes of 1 requires high energy. The other major fragmentations are [M + H‐toluene]⁺ and [M + H‐benzene]⁺ for compounds 1 and 6, respectively. The protonated 2,4,6‐tris(4‐methylbenzylamino)‐1,3,5‐triazine (4) exhibits competitive eliminations of p‐xylene and 3,6‐dimethylenecyclohexa‐1,4‐diene. Moreover, protonated 2,4,6‐tris(1‐phenylethylamino)‐1,3,5‐triazine (5) dissociates via three successive losses of styrene. Density functional theory (DFT) calculations indicate that an ion/neutral complex (INC) between benzyl cation and the rest of the molecule is unstable, but the protonated molecules of 1 and 6 rearrange to an intermediate by the migration of a benzyl group to the ring ‘N’. Subsequent shift of a second benzyl group generates an INC for the protonated molecule of 1 and its product ions can be explained from this intermediate. The shift of a second benzyl group to the ring carbon of the first benzyl group followed by an H‐shift from ring carbon to ‘O’ generates the key intermediate for the formation of the ion of m/z 181 from the protonated molecule of 6. The proposed mechanisms are supported by high resolution mass spectrometry data, deuterium‐labeling and CAD experiments combined with DFT calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.     

Synthesis of dispiro[oxindole‐pyrrolidine]‐thiazolo[3,2‐a][1,3,5]triazines by 1,3‐dipolar cycloaddition

The 1,3‐dipolar cycloaddition of an azomethine ylide generated by a decarboxylative route from sarcosine and isatin to 7‐arylmethylidene‐3‐aryl‐3,4‐dihydro‐2H‐thiazolo[3,2‐a][1,3,5]triazin‐6(7H)‐ones afforded novel dispiro[oxindole‐pyrrolidine]‐thiazolo[3,2‐a][1,3,5]triazines in moderate yields. The structures of the products were determined and characterized thoroughly by NMR, MS, IR, and elemental analysis. The results of experiment indicated that this 1,3‐dipolar cycloaddition proceeded with high stereoselectivity and regioselectivity. J. Heterocyclic Chem., (2011).     

Thermal analysis of 1,4‐di[n′‐(quinolyl)]buta‐1,3‐diynes,structure, and topo‐oligomerization: Polymerization of 3‐ethynylquinoline with the triethyl aluminum/vanadium 2,4‐pentanedionate catalyst system

Conjugated 1,4‐bis(n′‐quinolyl)‐1,3‐butadiynes were obtained through the oxidative dimerization of the corresponding n′‐ethynylquinolines catalyzed by cuprous chloride. Differential scanning calorimetry analysis of the 1,4‐bis[n′‐(quinolyl)]buta‐1,3‐diyne molecules produced evidence of a syn–anti rotational equilibrium around the 1,3‐diyne axis and an irreversible transformation into a thermopolymer. The topo‐oligomerization of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne, which took place by irradiation with sunlight, was investigated with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Accurate X‐ray molecular structure and refinement analysis of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne was conducted. The molecular crystalline packing consisted of parallel arrays of two groups of centrosymmetric molecules (antirotamer) in a herringbone assemblage in the solid state. The polymerization of 3‐ethynylquinoline was carried out with the AlEt₃/V(acac)₃ system to produce a mixture of 1,2,4‐ and 1,3,5‐tris(3′‐quinolyl)benzene cyclotrimers and a trans–cisoid polyene structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6031–6040, 2004     

Regioselective Synthesis of 6‐[Chloro(difluoro)methyl]salicylates by [3+3] Cyclocondensations of 1,3‐Bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐Chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one

The TiCl₄‐mediated [3+3] cyclocondensation of various 1,3‐bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one provides a regioselective access to novel 6‐(chlorodifluoromethyl)salicylates (=6‐(chlorodifluoromethyl)‐2‐hydroxybenzoates) with very good regioselectivity. For selected products, it was demonstrated that the CF₂Cl group can be transformed to CF₂H and CF₂(Allyl) by free‐radical reactions.     

2‐Amino‐8‐(2‐deoxy‐2‐fluoro‐β‐D‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one: Synthesis and Conformation of a 5‐Aza‐7‐deazaguanine Fluoronucleoside

Nucleobase‐anion glycosylation of 2‐[(2‐methyl‐1‐oxopropyl)amino]imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one ( 6 ) with 3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐α‐D ‐arabinofuranosyl bromide ( 8 ) furnishes a mixture of the benzoyl‐protected anomeric 2‐amino‐8‐(2‐deoxy‐2‐fluoro‐D ‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐ones 9 / 10 in a ratio of ca. 1 : 1. After deprotection, the inseparable anomeric mixture 3 / 4 was silylated. The obtained 5‐O‐[(1,1‐dimethylethyl)diphenylsilyl] derivatives 11 and 12 were separated and desilylated affording the nucleoside 3 and its α‐D anomer 4 . Similar to 2′‐deoxy‐2′‐fluoroarabinoguanosine, the conformation of the sugar moiety is shifted from S towards N by the fluoro substituent in arabino configuration.     

Synthesis and luminescence of yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐ alt‐(1,3‐phenylenevinylene)]s

Soluble yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)] derivatives ( 6 ) were synthesized and characterized. These polymers contained oligo(p‐phenylene vinylene) chromophores of equal conjugation length, which were jointed via a common m‐phenylene unit. An optical comparison of 6 and its model compound ( 8 ) at room temperature and low temperatures revealed the similarity in their absorption and fluorescence band structures. The vibronic band structure of 6 was assigned with the aid of the spectroscopic data for 8 at the low temperatures. 6 was electroluminescent and had an emission maximum wavelength at approximately 565 nm. With the device indium tin oxide/PEDOT/ 6 /Ca configuration, the polymer exhibited an external quantum efficiency as high as 0.25%. Simple substitution on m‐phenylene of 6 raised the electroluminescence output by a factor of about 10. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5853–5862, 2004     

Crystallographic report: Bis[tris(2‐methyl‐2‐phenylpropyl)tin] piperazinyldithiocarbamate

The centrosymmetric structure of bis[tris(2‐methyl‐2‐phenylpropyl)tin]piperazinyldithiocarbamate contains four‐coordinated tin and monodentate dithiocarbamate ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

1H NMR for quantifying sulfide trapping efficiency by using 1,3,5‐tris(2‐hydroxyethyl)‐1,3,5‐triazinane

Hydrogen sulfide (H₂S) is an extremely toxic colourless gas; it is corrosive and denser than air. It usually happens in oil and natural gas fields, refineries, coal mines, and in some industrial effluent treatment systems. This work presents an alternative method of monitoring and quantifying H₂S trapping efficiency by using 1,3,5‐tris(2‐hydroxyethyl)‐1,3,5‐triazinane as a sequestering agent, and sodium sulfide as a source of sulfide ion, through ¹H NMR spectroscopy. The results proved that the reaction occurs very quickly at 20 °C at pH 7 and 10. 3,5‐di(2‐hydroxyethyl)‐1,3,5‐thiodiazinane and 5‐(2‐hydroxyethyl)‐1,3,5‐dithiozinane were observed and quantified; it was evidenced that ¹H NMR spectroscopy can be applied as a fast and effective method to quantify H₂S trapping efficiency. Copyright © 2014 John Wiley & Sons, Ltd.     

Adducts of 1,1,1‐tris(4‐hydroxy­phenyl)­ethane with 1,2‐bis(4‐pyridyl)­ethane and 1,2‐bis(4‐pyridyl)­ethene: continuously interwoven structures in three dimensions

In the adduct 1,2‐bis(4‐pyridyl)­ethane–1,1,1‐tris(4‐hydroxy­phenyl)­ethane (1/2), C₁₂H₁₂N₂·2C₂₀H₁₈O₃, the bipyridyl component lies across an inversion centre in P. The tris‐phenol mol­ecules [systematic name: 4,4′,4′′‐(ethane‐1,1,1‐triyl)­triphenol] are linked by O—H?O hydrogen bonds to form sheets built from R(38) rings, and symmetry‐related pairs of sheets are linked by the bipyridyl mol­ecules via O—H?N hydrogen bonds to form open bilayers. Each bilayer is interwoven with two adjacent bilayers, forming a continuous three‐dimensional structure. In the adduct 1,2‐bis(4‐pyridyl)­ethene–1,1,1‐tris(4‐hydroxy­phenyl)­ethane–methanol (1/1/1), C₁₂H₁₀N₂·C₂₀H₁₈O₃·CH₄O, the mol­ecules are linked by O—H?O and O—H?N hydrogen bonds into three interwoven three‐dimensional frameworks, generated by single spiral chains along [010] and [001] and a triple‐helical spiral along [100].     

A structural study of (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol chloroform hemisolvate and (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1‐phenyl‐3,5‐bis(2‐methoxyphenyl)cyclohexan‐1‐ol

(1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol or (4‐hydroxy‐2,4,6‐triphenylcyclohexane‐1,3‐diyl)bis(phenylmethanone), C₃₈H₃₂O₃, (1), is formed as a by‐product in the NaOH‐catalyzed synthesis of 1,3,5‐triphenylpentane‐1,5‐dione from acetophenone and benzaldehyde. Single crystals of the chloroform hemisolvate, C₃₈H₃₂O₃·0.5CHCl₃, were grown from chloroform. The structure has triclinic (P) symmetry. One diastereomer [as a pair of (1RS,2SR,3RS,4SR,5RS)‐enantiomers] of (1) has been found in the crystal structure and confirmed by NMR studies. The dichoromethane hemisolvate has been reported previously [Zhang et al. (2007). Acta Cryst. E 63 , o4652]. (1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐3,5‐bis(2‐methoxyphenyl)‐1‐phenylcyclohexan‐1‐ol or [4‐hydroxy‐2,6‐bis(2‐methoxyphenyl)‐4‐phenylcyclohexane‐1,3‐diyl]bis(phenylmethanone), C₄₀H₃₆O₅, (2), is also formed as a by‐product, under the same conditions, from acetophenone and 2‐methoxybenzaldehyde. Crystals of (2) have been grown from chloroform. The structure has orthorhombic (Pca2₁) symmetry. A diastereomer of (2) possesses the same configuration as (1). In both structures, the cyclohexane ring adopts a chair conformation with all bulky groups (benzoyl, phenyl and 2‐methoxyphenyl) in equatorial positions. The molecules of (1) and (2) both display one intramolecular O—H...O hydrogen bond.     

Quinolone analogues 2. A facile synthesis of novel 3‐substituted 1‐alkyl‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalines

The reaction of the 2‐(1‐alkylhydrazino)‐6‐chloroquinoxaline 4‐oxides 1a,b with diethyl acetone‐dicarboxylate or 1,3‐cyclohexanedione gave ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐1,5‐dihydropyridazino[3,4‐b]quinoxaline‐3‐carboxylates 5a,b or 6‐alkyl‐10‐chloro‐1‐oxo‐1,2,3,4,6,12‐hexahydroquinoxalino[2,3‐c]cinnolines 7a,b , respectively. Oxidation of compounds 5a,b with nitrous acid afforded the ethyl 1‐alkyl‐7‐chloro‐3‐ethoxycarbonylmethylene‐4‐hydroxy‐1,4‐dihydropyridazino‐[3,4‐b]quinoxaline‐4‐carboxylates 9a,b , whose reaction with base provided the ethyl 2‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)acetates 6a,b , respectively. On the other hand, oxidation of compounds 7a,b with N‐bromosuccinimide/water furnished the 4‐(1‐alkyl‐7‐chloro‐4‐oxo‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)butyric acids 8a,b , respectively. The reaction of compound 8a with hydroxylamine gave 4‐(7‐chloro‐4‐hydroxyimino‐1‐methyl‐1,4‐dihydropyridazino[3,4‐b]quinoxalin‐3‐yl)‐butyric acid 12 .