Dicarbonyldi‐μ‐chloro‐cis,cis‐η4‐1,5‐cyclo­octa­dienedirhodium(I)

The title compound, dicarbonyl‐1κ²C‐di‐μ‐chloro‐1:2κ⁴Cl‐[cis,cis‐2(η⁴)‐1,5‐cyclo­octa­diene]­di­rhodium(I), [Rh₂Cl₂(C₈H₁₂)(CO)₂], consists of a di­chloro‐bridged dimer of rhodium, with a non‐bonded Rh?Rh distance of 3.284 (2) Å. One Rh atom is coordinated to two carbonyl ligands, while the other Rh atom is coordinated to the cyclo­octa­diene moiety.     

Chlorido(dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐κ2N,N′)(η5‐pentamethylcyclopentadienyl)rhodium(III) chloride 1‐hydroxypyrrolidine‐2,5‐dione disolvate

The title complex, [Rh(C₁₀H₁₅)Cl(C₁₄H₁₂N₂O₄)]Cl·2C₄H₅NO₃, has been synthesized by a substitution reaction of the precursor [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]chlorido(pentamethylcyclopentadienyl)rhodium(III) chloride with NaOCH₃. The Rh^III cation is located in an RhC₅N₂Cl eight‐coordinated environment. In the crystal, 1‐hydroxypyrrolidine‐2,5‐dione (NHS) solvent molecules form strong hydrogen bonds with the Cl⁻ counter‐anions in the lattice and weak hydrogen bonds with the pentamethylcyclopentadienyl (Cp*) ligands. Hydrogen bonding between the Cp* ligands, the NHS solvent molecules and the Cl⁻ counter‐anions form links in a V‐shaped chain of Rh^III complex cations along the c axis. Weak hydrogen bonds between the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate ligands and the Cl⁻ counter‐anions connect the components into a supramolecular three‐dimensional network. The synthetic route to the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐containing rhodium complex from the [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]rhodium(III) precursor may be applied to link Rh catalysts to the surface of electrodes.     

Di‐μ‐methanolato‐bis[(η4‐tetrafluorobenzobarrelene)rhodium(I)]

The versatile synthetic precursor methanolate‐bridged title rhodium complex, [Rh₂(CH₃O)₂(C₁₂H₆F₄)₂] or [Rh(μ‐OCH₃)(tfbb)]₂ [tfbb = tetrafluorobenzobarrelene or 3,4,5,6‐tetrafluorotricyclo[6.2.2.0^2,7]dodeca‐2(7),3,5,9,11‐pentaene], has been structurally characterized. The asymmetric unit contains half a molecule that can be expanded via a twofold axis. The title compound has been shown to be a dinuclear rhodium complex where each metal centre is coordinated by two O atoms from two bridging methanolate groups and by the olefinic bonds of a tfbb ligand. Comparison of the bite angles of tfbb, norbornadiene (nbd) and cyclooctadiene (cod) olefins in their η⁴‐coordination to rhodium reveals similarities between the tfbb and nbd ligands, which are much more rigid than cod. The short distance found between the distorted square‐planar metal centres [2.8351 (4) Å] has been related to the syn conformation of the folded core `RhORhO' ring.     

Monocarbonyl cationic rhodium(I) complexes

Summary The preparations and characterisation of cationic complexes of the type [Rh(CO)(MeCN)(PR₃)₂]ClO₄, [Rh(CO)L(PR₃)₂]ClO₄ (L=py or 2-MeOpy), [Rh(CO)(L-L)(PR₃)₂]ClO₄ (L-L = bipy or phen) and [Rh(CO)(PR₃)₃]ClO₄ with PR₃ = P(p-YC₆H₄)₃ (Y=Cl, F, Me or MeO) are described.     

Generation and Reactivity of {(Ethane‐1,2‐diyl)bis[diisopropylphosphine‐κP]}‐{[2,4,6‐tri(tert‐butyl)phenyl]phosphino‐κP}rhodium ([Rh{PH(tBu3C6H2)}(iPr2PCH2CH2PiPr2)]): Catalytic C−P Bond Formation via Intramolecular C−H/P−H Dehydrogenative Cross‐Coupling

The complex [Rh(η³‐benzyl)(dippe)] ( 1 ; dippe=bis(diisopropylphosphino)ethane=(ethane‐1,2‐diyl)bis[diisopropylphosphine]) reacted cleanly with Mes*PH₂ ( 2 ; Mes*=2,4,6‐^tBu₃C₆H₂) to provide a new Rh species [Rh(H)(dippe)(L)] ( 3 ), L being the 2,3‐dihydro‐3,3‐dimethyl‐1H‐phosphindole ligand 4 (=^tBu₂C₆H₂(CMe₂CH₂PH)) (Scheme 1). Complex 3 was converted to the corresponding chloride [Rh(Cl)(dippe)(L)] ( 6 ) when treated with CH₂Cl₂, whereas the dimeric species [Rh₂{μ‐^tBu₂C₆H₂(CMe₂CH₂P)}(μ‐H)(dippe)₂] ( 7 ) was formed upon thermolysis in toluene (Scheme 2). The structures of 6 and 7 ⋅C₇H₈ were determined by X‐ray crystallography. Complexes 1 and 3 served as catalyst precursors for the dehydrogenative coupling of C−H and P−H bonds in the conversion of 2 to 4 (Scheme 3). Deuteration studies with Mes*PD₂ exposed a complex series of bond‐activation pathways that appear to involve C−H activation of the dippe ligand by the Rh‐atom (Schemes 4 and 5)     

Terminal and Bridging Parent Amido 1,5‐Cyclooctadiene Complexes of Rhodium and Iridium

The ready availability of rare parent amido d⁸ complexes of the type [{M(μ‐NH₂)(cod)}₂] (M=Rh ( 1 ), Ir ( 2 ); cod=1,5‐cyclooctadiene) through the direct use of gaseous ammonia has allowed the study of their reactivity. Both complexes 1 and 2 exchanged the di‐olefines by carbon monoxide to give the dinuclear tetracarbonyl derivatives [{M(μ‐NH₂)(CO)₂}₂] (M=Rh or Ir). The diiridium(I) complex 2 reacted with chloroalkanes such as CH₂Cl₂ or CHCl₃, giving the diiridium(II) products [(Cl)(cod)Ir(μ‐NH₂)₂Ir(cod)(R)] (R=CH₂Cl or CHCl₂) as a result of a two‐center oxidative addition and concomitant metal–metal bond formation. However, reaction with ClCH₂CH₂Cl afforded the symmetrical adduct [{Ir(μ‐NH₂)(Cl)(cod)}₂] upon release of ethylene. We found that the rhodium complex 1 exchanged the di‐olefines stepwise upon addition of selected phosphanes (PPh₃, PMePh₂, PMe₂Ph) without splitting of the amido bridges, allowing the detection of mixed COD/phosphane dinuclear complexes [(cod)Rh(μ‐NH₂)₂Rh(PR₃)₂], and finally the isolation of the respective tetraphosphanes [{Rh(μ‐NH₂)(PR₃)₂}₂]. On the other hand, the iridium complex 2 reacted with PMe₂Ph by splitting the amido bridges and leading to the very rare terminal amido complex [Ir(cod)(NH₂)(PMePh₂)₂]. This compound was found to be very reactive towards traces of water, giving the more stable terminal hydroxo complex [Ir(cod)(OH)(PMePh₂)₂]. The heterocyclic carbene IPr (IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene) also split the amido bridges in complexes 1 and 2 , allowing in the case of iridium to characterize in situ the terminal amido complex [Ir(cod)(IPr)(NH₂)]. However, when rhodium was involved, the known hydroxo complex [Rh(cod)(IPr)(OH)] was isolated as final product. On the other hand, we tested complexes 1 and 2 as catalysts in the transfer hydrogenation of acetophenone with iPrOH without the use of any base or in the presence of Cs₂CO₃, finding that the iridium complex 2 is more active than the rhodium analogue 1 .     

Synthesis,Characterization and Reactivity of the Tricarbonyl(formylcycloheptatrienyl)iron‐Anion [(η3‐C7H6CHO)Fe(CO)3]−

Deprotonation of the readily available organometallic aldehyde derivative [(η⁴‐C₇H₇CHO)Fe(CO)₃] ( 2 ) with NaN(SiMe₃)₂ in benzene solution at ambient temperature afforded the anionic formylcycloheptatrienyl complex Na[(η³‐C₇H₆CHO)Fe(CO)₃] ( 3 ). The anion is fluxional in solution and displays a unique ambident reactivity towards electrophiles (MeI, Me₃SiCl). New substituted [(η⁴‐RC₇H₆CHO)Fe(CO)₃] and [(η⁴‐heptafulvene)Fe(CO)₃] complexes have been identified as the products. Treatment of 3 with 0.5 equivalents of dimeric [(COD)RhCl]₂ (COD = 1,5‐cyclooctadiene) afforded the functionalized Fe‐Rh cycloheptatrienyl complex [(μ‐C₇H₆CHO)(CO)₃FeRh(COD)] ( 7 ) in up to 86 % yield. Carbonylation of 7 under an atmosphere of CO led to facile conversion to the heterobimetallic pentacarbonyl derivative [(μ‐C₇H₆CHO)(CO)₃FeRh(CO)₂] ( 8 ), which is also accessible in lower yield from the direct reaction of 3 with [Rh(CO)₂Cl]₂.     

2H‐Azirines as Ligands: Structural Characterization of the First Neutral and Cationic (η5‐C5Me5)Rh(III) 2H‐Azirine Complexes

The synthesis and structural characterization of two azirine rhodium(III ) complexes are described. The stabilization, N‐coordination and phenylgroup π‐stacking of the highly reactive and strained 3‐phenyl‐2H‐azirine by transition metal coordination is observed. The reaction of the dimeric complex [(η⁵‐C₅Me₅)RhCl₂]₂ with 3‐phenyl‐2H‐azirine (az) in CH₂Cl₂ at room temperature in a 1:2 molar ratio afforded the neutral mono‐azirine complex [(η⁵‐C₅Me₅)RhCl₂(az)]. The subsequent reaction of [(η⁵‐C₅Me₅)RhCl₂]₂ with six equivalents of az and 4 equivalents of AgOTf yielded the cationic tris‐azirine complex [(η⁵‐C₅Me₅)Rh(az)₃](OTf)₂. After purification, all complexes have been fully characterized. The molecular structures of the novel rhodium(III ) complexes exhibit slightly distorted octahedral coordination geometries around the metal atoms.     

Structural studies of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine hetero‐scorpionate copper complexes

The structures of five compounds consisting of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine complexed with copper in both the Cu^I and Cu^II oxidation states are presented, namely chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(I) 0.18‐hydrate, [CuCl(C₁₅H₁₇N₃)]·0.18H₂O, (1), catena‐poly[[copper(I)‐μ₂‐(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ⁵N,N′,N′′:C²,C³] perchlorate acetonitrile monosolvate], {[Cu(C₁₅H₁₇N₃)]ClO₄·CH₃CN}_n, (2), dichlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) dichloromethane monosolvate, [CuCl₂(C₁₅H₁₇N₃)]·CH₂Cl₂, (3), chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) perchlorate, [CuCl(C₁₅H₁₇N₃)]ClO₄, (4), and di‐μ‐chlorido‐bis({(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II)) bis(tetraphenylborate), [Cu₂Cl₂(C₁₅H₁₇N₃)₂][(C₆H₅)₄B]₂, (5). Systematic variation of the anion from a coordinating chloride to a noncoordinating perchlorate for two Cu^I complexes results in either a discrete molecular species, as in (1), or a one‐dimensional chain structure, as in (2). In complex (1), there are two crystallographically independent molecules in the asymmetric unit. Complex (2) consists of the Cu^I atom coordinated by the amine and pyridyl N atoms of one ligand and by the vinyl moiety of another unit related by the crystallographic screw axis, yielding a one‐dimensional chain parallel to the crystallographic b axis. Three complexes with Cu^II show that varying the anion composition from two chlorides, to a chloride and a perchlorate to a chloride and a tetraphenylborate results in discrete molecular species, as in (3) and (4), or a bridged bis‐μ‐chlorido complex, as in (5). Complex (3) shows two strongly bound Cl atoms, while complex (4) has one strongly bound Cl atom and a weaker coordination by one perchlorate O atom. The large noncoordinating tetraphenylborate anion in complex (5) results in the core‐bridged Cu₂Cl₂ moiety.     

Heteropolynuclear Sodium(I) Lead(II) Complex: Crystal and Molecular Structure of a Novel 3‐D Polymer, [(en)Pb(μ3‐ONO)2Na(μ3‐ONO)2Na(μ‐O2ClO2)Na]n

A novel 3D polymeric heteropolynuclear sodium(I) lead(II) complex containing different ligands, [NaPb(ClO₄)(en)(NO₂)₂] was synthesized and characterized by elemental analysis and IR, and ¹H‐, ¹³C‐, and ²⁰⁷Pb‐NMR spectroscopy. The single‐crystal X‐ray data of [NaPb(ClO₄)(en)(NO₂)₂]_n established that the complex is a three‐dimensional polymer, [(en)Pb(μ₃‐ONO)₂Na(μ₃‐ONO)₂Na(μ‐O₂ClO₂)Na]_n. The Pb and Na atoms have four‐ and eight‐coordinate geometry, respectively. The lone pair of electrons at the Pb^II atom is ‘stereochemically active’.     

Mononuclear Complexes of Platinum Group Metals Containing η6‐ and η5‐Cyclic Π‐Perimeter Hydrocarbon and Pyridylpyrazolyl Derivatives: Syntheses and Structural Studies

Piano‐stool‐shaped platinum group metal compounds, stable in the solid state and in solution, which are based on 2‐(5‐phenyl‐1H‐pyrazol‐3‐yl)pyridine ( L ) with the formulas [(η⁶‐arene)Ru( L )Cl]PF₆ {arene = C₆H₆ ( 1 ), p‐cymene ( 2 ), and C₆Me₆, ( 3 )}, [(η⁶‐C₅Me₅)M( L )Cl]PF₆ {M = Rh ( 4 ), Ir ( 5 )}, and [(η⁵‐C₅H₅)Ru(PPh₃)( L )]PF₆ ( 6 ), [(η⁵‐C₅H₅)Os(PPh₃)( L )]PF₆ ( 7 ), [(η⁵‐C₅Me₅)Ru(PPh₃)( L )]PF₆ ( 8 ), and [(η⁵‐C₉H₇)Ru(PPh₃)( L )]PF₆ ( 9 ) were prepared by a general method and characterized by NMR and IR spectroscopy and mass spectrometry. The molecular structures of compounds 4 and 5 were established by single‐crystal X‐ray diffraction. In each compound the metal is connected to N1 and N11 in a k² manner.     

Der Dihydridoiridium(III)‐Komplex [IrH2Cl(PiPr3)2] als Molekülbaustein für unsymmetrische Rhodium–Iridiumund Iridium–Iridium‐Zweikernverbindungen

The Dihydridoiridium(III) Complex [IrH₂Cl(P i Pr₃)₂] as a Molecular Building Block for Unsymmetrical Binuclear Rhodium–Iridium and Iridium–Iridium Compounds The title compound [IrH₂Cl(PiPr₃)₂] ( 3 ) reacts with the chloro‐bridged dimers [RhCl(PiPr₃)₂]₂ ( 1 ) and [IrCl(C₈H₁₄)(PiPr₃)]₂ ( 5 ) by cleavage of the Cl‐bridges to give the unsymmetrical binuclear complexes 4 and 6 with Rh(μ‐Cl)₂Ir and Ir(μ‐Cl)₂Ir as the central building block. The reactions of 3 with the bis(cyclooctene) and (1,5‐cyclooctadiene) compounds [MCl(C₈H₁₄)₂]₂ ( 7 , 8 ) and [MCl(η⁴‐C₈H₁₂)]₂ ( 9 , 10 ) (M = Rh, Ir) occur analogously and afford the rhodium(I)‐iridium(III) and iridium(I)‐iridium(III) complexes 11 – 14 in 70–80% yield. Treatment of [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH₂(PiPr₃)₂] ( 13 , 14 ) with phenylacetylene leads to the formation of the substitution products [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH(C≡CPh)(PiPr₃)₂] ( 15 , 16 ) without changing the central molecular core. Similarly, the compound [(η⁴‐C₈H₁₂)Rh(μ‐Br)₂IrH(C≡CPh)(PiPr₃)₂] ( 18 ) has been prepared; it was characterized by X‐ray crystallography.     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

Preparation and Reactivity of Mo(NCMe)(η2‐C2Ph2)2(η4‐C4Ph4)

Reaction of Mo(CO)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) and Me₃NO in acetonitrile solvent affords Mo(NCMe)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) 1 . Compound 1 reacts with trimethylphosphine to produce Mo(PMe₃)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) 2 , or reacts with diphenylacetylene to produce (η⁵‐C₅Ph₅)₂Mo 3 and Mo(η²‐O₂CPh)(η⁴‐C₄Ph₄H)(η⁴‐C₄Ph₄) 4 . The molecular structures of 1, 2 and 4 have been determined by an X‐ray diffraction study.     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

Azido­[1,1′‐bis­(di­phenyl­phosphino)­ferrocene](penta­methyl­cyclo­penta­dienyl)­rhodium(III) hexa­fluoro­phosphate

In the title compound, azido‐2κN‐bis­[μ‐(1η⁵:2κP)‐di­phenyl­phosphino­cyclo­penta­dienyl][2(η⁵)‐penta­methyl­cyclo­penta­di­enyl]­iron(III)­rhodium(III) hexa­fluoro­phosphate, [{Rh(C₁₀H₁₅)(N₃)}{Fe(μ‐C₁₇H₁₄P)₂}]PF₆ or [FeRh(C₁₀H₁₅)(μ‐C₁₇H₁₄P)₂(N₃)]PF₆, the coordination sphere of Rh^III can be described as pseudo‐tetrahedral, composed of two P atoms from a 1,1′‐bis­(di­phenyl­phosphino)­ferrocene (dppf) ligand, an azido N atom and the centroid of the ring of a C₅Me₅ (Cp*) ligand. The two cyclo­penta­dienyl rings in the dppf moiety adopt an eclipsed conformation. The Rh⋯Fe distance is 4.340 (2) Å.     

Rhodium‐catalyzed transfer hydrogenation with aminophosphines and analysis of electrical characteristics of rhodium(I) complex/n‐Si heterojunctions

A series of novel neutral mononuclear rhodium(I) complexes of the P―NH ligands have been prepared starting from [Rh(cod)Cl]₂ complex. Structural elucidation of the complexes was carried out by elemental analysis, IR and multinuclear NMR spectroscopic data. The complexes were applied to the transfer hydrogenation of acetophenone derivatives to 1‐phenylethanol derivatives in the presence of 2‐propanol as the hydrogen source. Catalytic studies showed that all complexes are also excellent catalyst precursors for transfer hydrogenation of aryl alkyl ketones in 0.1 m iso‐PrOH solution. In particular, [Rh(cod)(PPh₂NH―C₆H₄―4‐CH(CH₃)₂)Cl] acts as an excellent catalyst, giving the corresponding alcohols in excellent conversion up to 99% (turnover frequency ≤ 588 h^?1). Furthermore, rhodium(I) complexes have been used in the formation of organic–inorganic heterojunction by forming their thin films on n‐Si and evaporating Au on the films. It has been seen that the structures have rectifying properties. Their electrical properties have been analyzed with the help of current–voltage measurements. Finally, it has been shown that the complexes can be used in the fabrication of temperature and light sensors. Copyright © 2014 John Wiley & Sons, Ltd.     

Ferrocenyl-nitrogen donor ligands. Synthesis and characterization of rhodium(I) complexes of ferrocenylpyridine and related ligands

The preparation of a series of complexes of the types [RhCl(CO)₂(L)], [RhCl(cod)(L)] and [Rh(cod)(L)₂]ClO₄, where L is a ligand incorporating a ferrocenyl group and a pyridine ring is described. Complexes were characterized using NMR, IR and electronic spectroscopy. The electrochemical behaviour of the complexes was examined using cyclic voltammetry. The X-ray structures of three of the complexes, [RhCl(CO)₂{NC₅H₄CNC₆H₄(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}], [RhCl(cod)(3-Fcpy)] and [RhCl(cod){3-Fc(C₆H₄)py}], were determined.     

Novel isolated,L‐amino acid‐ligated rhodium catalysts that induce highly helix‐sense‐selective polymerization of an achiral 3,4,5‐trisubstituted phenylacetylene

Two novel chiral well‐defined rhodium complexes, Rh(cod)(L‐Phe) (cod = 1,5‐cyclooctadiene, Phe = phenylalanine) and Rh(cod)(L‐Val) (Val = valine) were synthesized, isolated by recrystallization, and characterized. The helix‐sense‐selective polymerization (HSSP) of an achiral 3,4,5‐trisubstituted phenylacetylene, p‐dodecyloxy‐m,m‐dihydroxyphenylacetylene (DoDHPA) was examined by using the two Rh complexes as catalysts. These catalysts provided high molecular weight polymers (M_w 28 × 10⁴?45 × 10⁴) in about 40%–85% yields. The resulting polymers exhibited a bisignated CD signal at about 300 nm and a broad signal around 470 nm, indicating that they have preferential one‐handed helical structure. The present catalysts achieved larger molar ellipticity up to [θ]₃₁₀ = 13.0 × 10⁴ deg cm²/dmol than those with binary chiral catalytic systems, [Rh(cod)Cl]₂/(L‐phenylalaninol), [Rh(cod)Cl]₂/(L‐valinol), and [Rh(nbd)Cl]₂/(R)‐PEA. All these results manifest that the present, well‐defined Rh complexes serve as excellent catalysts for the HSSP of DoDHPA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2346–2351     

A 1,2,4‐diazaphospholane complex of rhodium

The crystal structure of a prospective olefin catalyst, namely {2‐[1‐acetyl‐5‐(2‐hydroxy­phenyl)‐4‐phenyl‐1,2,4‐di­aza­phospholan‐3‐yl]­phenyl acetate‐κP}chloro­(η⁴‐cyclo­octa‐1,5‐diene)rhodium(I) di­chloro­methane solvate, [RhCl(C₈H₁₂)(C₂₄H₂₃N₂O₄P)]·CH₂Cl₂, has been determined at 173 K. The five‐membered heterocycle of the phosphine ligand is in a slightly distorted twist conformation. An intramolecular N1—H1⃛Cl1 hydrogen bond contributes to the adopted conformation and may additionally participate in secondary interactions with substrates during catalysis.