Synthesis and study of azo dye compounds: variation of mesogenic behaviour with length of alkyl chains

The mesogenic behaviours of two azo dye liquid crystals, 1 and 4, differ because of the different length of terminal alkyl chains; azo dye 1 shows a SmB phase, azo dye 4 shows nematic and SmA phases during thermal processing. The molecular stackings of these two azo dye liquid crystals are compared on the basis of crystallographic studies to explain such unexpected mesogenic behaviour.     

Synthesis and study of azo dye compounds: variation of mesogenic behaviour with length of alkyl chains

The mesogenic behaviours of two azo dye liquid crystals, 1 and 4, differ because of the different length of terminal alkyl chains; azo dye 1 shows a SmB phase, azo dye 4 shows nematic and SmA phases during thermal processing. The molecular stackings of these two azo dye liquid crystals are compared on the basis of crystallographic studies to explain such unexpected mesogenic behaviour.     

Synthesis,Characterization, and Antimicrobial Properties of New 1,3,4‐Thiadiazoles Derived from Azo Dyes

Some new 1,3,4‐thiadiazoles derived from azo dyes were synthesized. Two different synthesis methods were used for these compounds: Esters pertaining to the azo dyes were converted into 1,3,4‐thiadiazoles, or benzothiazole ester derivatives were converted to 1,3,4‐thiadiazoles followed by the synthesis of azo dye derivatives. The desired products were successfully obtained using the latter method. The molecular structures of these compounds were characterized using spectroscopic methods such as FTIR, ¹H NMR, ¹³C NMR, and elemental analysis. Furthermore, antimicrobial activity was studied for the synthesized compounds. Compound 3e exhibited antimicrobial activity against three different microorganisms. Compounds 3a , 3b , and 3d had activity against two different microorganisms, while compound 3c showed activity against only one microorganism.     

The synthesis and first full structural elucidation of a benzotriazole azo dye

Although azo dyes containing benzotriazole are of interest as substrates for surface enhanced resonance Raman scattering, SERRS, little is known of their molecular structure due to their poor crystal growth properties. We recently synthesised a highly crystalline dihydroquinoline via an unusual condensation reaction and we report herein that the azo‐benzotriazole dye subsequently formed was sufficiently crystalline to allow structural elucidation using synchroton radiation. It was found that this benzotriazole dye exists as the unexpected 6‐isomer and the structure of the dihydroquinoline moiety changes markedly on coupling due to increased delocalisation.     

Studies on the electronic absorption spectra of some monoazo derivatives

The electronic absorption spectra of a series of azo dye compounds containing -Cl, -SO3H and -OH groups were recorded in twenty one solvents with different polarities. The solvents were selected to cover a wide range of parameters (refractive index, dielectric constant and hydrogen bonding ability). Solvent-induced effect on the maximum absorption band frequencies of azo dye compounds are described in terms of solute-solvent interactions. Multiple linear regression equation for νmax was performed using polarizability-polarity parameters and Kamlet-Taft solvatochromic parameters. The results help to assign the solvent-solute interactions and the solvatochromic potential of the investigated compounds. It is concluded that the electronic of the substituent and hydrogen bonding acceptor ability of the solvents are the major factors to the interaction in solutions.     

Thermotropic properties of ferrocene derivatives bearing a cholesteryl unit: structure–properties correlations

The synthesis and structural characterization of new liquid‐crystalline compounds containing ferrocene, azo‐aromatic and cholesteryl groups are reported. Taking into account the advantage brought by chirality, ferrocene and azo units, these structures could be good precursors for obtaining materials capable of responding to magnetic and electric fields or to UV‐light exposure. The influence of each structural unit (ferrocene, cholesterol, azo aromatic core and flexible chain length) has been studied by comparing analogous compounds possessing the same structure but without the element being analyzed. Ferrocene is a three‐dimensional bulky unit, so that, regardless of the substituents' nature, this unit could cause steric repulsions with neighboring molecules. These interactions could lead to a decrease of the transition temperature domain. Surprisingly, a decrease in the clearing point was not observed for the compounds discussed. This behavior was possible because ferrocene is connected to the mesogen via a flexible unit. As a consequence, both phenyl analogues and ferrocene derivatives presented liquid‐crystalline properties with similarly high clearing points, but above the thermal stability of derivatives with azo groups. Their melting points depend on the way the molecules are packed, with different crystalline states being detected in the case of ferrocene derivatives. In order to explain the liquid‐crystalline behavior of the compounds synthesized, molecular simulations were performed using the Hyperchem program. Copyright © 2005 John Wiley & Sons, Ltd.     

Comparison of Electrochemical Behavior of Hydroxyl‐substituted and Nonhydroxyl‐substituted Azo Dyes at a Glassy Carbon Electrode

The voltammetric behaviour of four azo dyes has been compared at a glassy carbon electrode. It is shown that the azo dyes (e.g. Reactive Brilliant Red x‐3b (RBR x‐3b), Acid Red 6b (AR 6b)) with a hydroxyl group in the ortho position with respect to the azo bridge give rise to well defined, irreversible peaks for the oxidation and reduction process within a pH range of 2–12. In the case of the non‐hydroxyl azo dye (e.g. Reactive Yellow x‐rg (RY x‐rg)), or azo dye with a meta hydroxyl group (e.g. Reactive Orange x‐gn (RO x‐gn)), the oxidation was comparatively tougher, and the peak was not clear or even invisible in the accessible potential range. The mechanism of electrochemical oxidation of RBR x‐3b, as well as AR 6b is proposed. The reduction steps were only accessible when pH < 8 for RY x‐rg and RO x‐gn dye compounds. For the hydroxyl‐substituted dyes, re‐oxidation peaks were obtained in the subsequent scan, owing to the oxidation of reduction products‐amine or hydroazo intermediates.     

Spectrophotometric Studies on Some Arylazo Barbituric Acids and Arylazo Pyrimidine in Organic Solvents and in Buffer Solutions

The UV and visible spectra of some arylazo barbituric acids and arylazo pyrimidine in pure and mixed organic solvents of varying polarities have been studied. The different absorption bands displayed in the electronic spectra of these compounds are assigned and the possibility of the existence of these compounds in tautomeric equilibrium as well as in intra‐ and intermolecular H‐bonding were examined. The solute‐solvents molecular complexes liable to exist in polar‐nonpolar mixed solvents are investigated. The structure of the azo compounds were confirmed by ¹H NMR and IR spectroscopy. The ionization processes of the compounds were investigated and the possible ionization constants were determined and discussed in terms of molecular structure of the azo compounds.     

Novel Azo‐Dyes‐Modified Isatin Derivatives: Synthesis,UV/VIS Spectroscopic,and Electrochemical Study

A high‐yield and simple synthesis of certain aminomethylisatins bearing dye fragments via the Mannich reaction of isatin with amino‐containing azobenzenes was reported. It was found that the absence of electron‐donating groups in azo‐dye molecule prevents aminomethylation of isatin. The effect of the incorporation of an isatin moiety with an azobenzene dye in one molecule on its absorption and electrochemical behavior was studied using UV spectroscopy and cyclic voltammetry.     

Polyelectrolyte complexes. V. Solid‐state properties of some polycation/azo dye complexes controlled by the dye structure

The solid‐state properties of some polycation/azo dye complexes according to the dye structure were studied in this work. One polycation contained about 95 mol % N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride units in the backbone (PCA₅), and eight azo dyes, different in either the number of sulfonic groups or their distribution, were used as opposite components. The selected azo dyes were as Crystal Scarlet, Congo Red, Crocein Scarlet MOO, Ponceau SS, Amaranth, Ponceau S, Direct Blue 1, and Direct Red 80. Information on the compensation degree of the oppositely charges was obtained by the elemental analysis of the solid‐state polycation/dye complexes (the experimental contents of chlorine, nitrogen, and sulfur were compared with the calculated values). Differential scanning calorimetry was employed to probe the strength of the intermolecular interactions in the PCA₅/dye complexes. Wide‐angle X‐ray diffraction was used to assess the supramolecular order of the solid‐state complexes. The physical properties of the PCA₅/azo dye complexes (the complex stoichiometry, glass‐transition temperature, decomposition temperature, and degree of supramolecular order) were influenced mainly by the dye structure but also by the polycation concentration and the presence of NaCl. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 264–272, 2003     

Facile synthesis and properties of alkali-clearable azo disperse dye containing a carboxylic ester moiety

A yellow, alkali-clearable azo disperse dye containing a carboxylic ester moiety was readily synthesized from the reactant p-aminobenzoic acid by successive diazotization, coupling reaction, chlorination and esterification with ethanol. Then its molecular structure was characterized by FTIR,1H NMR,13 C NMR,mass spectrometry and elemental analysis. The synthesized dye and a similar control dye containing the acylamide moiety（I） were applied to dyeing poly（ethylene terephthalate） fabric and their washing and rubbing fastness properties with different post-treatment methods（reduction clearing and alkali clearing） were examined and compared. It is found that the ester-containing disperse dye shows good alkali-clear ability on poly（ethylene terephthalate） fabric and contaminates little to environment due to the absence of reductants, as well as low toxicity and easy recycling of the hydrolysates.     

New Synthesis of N,N‐Disubstituted (4‐Aminophenyl)diazenyl‐1,3,4‐thiadiazole,and Mesogenic Study and Molecular Modeling of Its H‐Bonded Complexes with a Series of m‐Alkoxybenzoic Acid Derivatives

A new N,N‐disubstituted (4‐aminophenyl)diazenyl‐1,3,4‐thiadiazole, an azo dye, was synthesized from the reaction of the 1‐decanoyl‐4‐phenylpiperazine in acetone, in situ, with the diazonium salt prepared from 1,3,4‐thiadiazol‐2‐amine and NaNO₂ in H₃PO₄. The azo dye was found to form complexes with a series of m‐alkoxybenzoic acid by intermolecular H‐bonding. The mesogenic behavior of the complexes were investigated by polarizing optical microscopy and differential scanning calorimetry. A study of the representing complex by powder X‐ray diffraction and molecular modeling was further undertaken to locate the H‐bonding position.     

Selective recognition and discrimination of water‐soluble azo dyes by a seven‐channel molecularly imprinted polymer sensor array

A seven‐channel molecularly imprinted polymer sensor array was prepared and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, UV‐Vis spectroscopy, and nitrogen physisorption studies. The results revealed that the imprinted polymers have distinct‐binding affinities from those of structurally similar azo dyes. Analysis of the UV‐Vis spectral response patterns of the seven dye analytes against the imprinted polymer array suggested that the different selectivity patterns of the array were closely connected to the imprinting process. To evaluate the effectiveness of the array format, the binding of a series of analytes was individually measured for each of the seven polymers, made with different templates (including one control polymer synthesized without the use of a template). The response patterns of the array to the selected azo dyes were processed by canonical discriminant analysis. The results showed that the molecularly imprinted array was able to discriminate each analyte with 100% accuracy. Moreover, the azo dyes in two real samples, spiked chrysoidin in smoked bean curd extract and Fanta lime soda (containing tartrazine), were successfully classified by the array.     

Synthesis of a New Azo Dye Sensor and its Chelation with Ag+

A new azo dye containing thiadiazoline ring was synthesized from the reaction of the diazobenzaldehyde with O‐aminothiophenol, which was characterized by NMR, IR spectroscopy and high resolution mass spectrometry. This dye compound can chelate Ag⁺ in CH₂Cl₂‐EtOH and then result in the variation of UV absorbances.     

Analysis of electrochemical degradation products of sulphonated azo dyes using high-performance liquid chromatography/tandem mass spectrometry

Electrochemical treatment of wastewaters containing azo dyes in the textile industry is a promising approach for their degradation. The monitoring of the course of the decomposition of azo dyes in wastewaters is essential due to the environmental impact of their degradation products. In this work, aqueous solutions of a simple azo dye with a low molecular weight (C.I. Acid Yellow 9) and more complex commercial dye (C.I. Reactive Black 5) were electrochemically treated in a laboratory-scale electrolytic cell in sodium chloride or ammonium acetate as supporting electrolytes. Ion-pairing reversed-phase high-performance liquid chromatography coupled with negative-ion electrospray ionization mass spectrometry is applied for the identification of electrochemical degradation products. In addition to simple inorganic salts, the formation of aromatic degradation products obtained due to the cleavage of azo bonds and further degradation reactions is shown, as well as chlorination where sodium chloride is the supporting electrolyte. Degradation mechanisms are suggested for the treatment with sodium chloride as the supporting electrolyte.     

Synthesis and Study of an N,N‐Disubstituted 4‐[(4‐Aminophenyl)diazenyl]benzaldehyde

An N,N‐disubstituted 4‐[(4‐aminophenyl)diazenyl]benzaldehyde (‘azo dye') with nematic phase was synthesized by reaction of the phenylpiperazine derivative with the formylbenzenediazonium salt. The salt was prepared by a simplified reaction of poly(aminobenzaldehyde) with NaNO₂ in the presence of HBF₄. The azo dye was further studied by crystallography. On the basis of molecular stacking identified from crystallography, the molecular modeling was carried out to explore the molecular interactions, and it was found that the attraction of two coplanar molecules with side‐to‐side contact is favored, and a nematic phase is thus formed during the thermal process.     

Thermal and dielectric properties of oriented liquid crystalline polysiloxane doped with azo‐dye

Investigations of dielectric relaxation and thermal properties of mixtures composed of liquid crystalline side‐chain polysiloxane and low molecular mass azo‐dye have been carried out. The dyes have been chosen to solublize well in the polymer matrix at concentrations up to 0.08 mol fraction. The dielectric relaxation experiments have shown the presence of separate processes attributed to reorientational motions of mesogenic side groups and dye molecules. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 369–377, 1999     

Synthesis and characterization of 7, 16‐bis(phenylazo)tetraaza[14]annulenes

The diazo coupling reaction between a tetraaza[14]annulene ( 1 ) and a series of 4‐substituted phenyl‐diazonium tetrafluoroborates yielded the corresponding 7, 16‐disubstituted products. Mass spectra indicate the presence of molecular ion peaks that substantiate the 7,16‐disubstituted products ( 4 ); the lack of olefinic proton signals corresponding to the 7,16‐ position in the ¹H nmr spectra of 4 also show that diazo coupling has taken place. Analysis of signals corresponding to the methyl groups of 4 in their ¹H and ¹³C nmr spectra indicate that the imine‐bis‐hydrazone form is present for compounds that do not contain p‐methoxyphenyl groups. However, analysis of methyl signals in the nmr specta of compounds 4 containing p‐methoxyphenyl groups show that the bis‐azo form and the imine‐bis‐hydrazone form are present through tautomerism. Complexation with nickel(II) ion induces the formation of the bis‐ azo structure.     

镍铁类水滑石对偶氮阴离子染料的吸附脱色作用

采用镍铁类水滑石作为吸附剂,对偶氮阴离子染料酸性大红G、活性艳红X-3B和直接耐酸大红4BS废水进行脱色处理,研究了时间、镍与铁的物质的量之比、初始pH和无机电解质添加剂等因素对脱色率的影响,并结合红外光谱和X射线衍射分析结果讨论了其吸附脱色机理.结果表明,三种染料在镍铁类水滑石上的吸附均为层间的阴离子交换吸附和外表面的吸附.通过阴离子交换进入层间后,不同于直接耐酸大红4BS阴离子,酸性大红G和活性艳红X-3B两种阴离子与水滑石层间水分子之间产生氢键作用;在化学键合过程中,染料分子被镍铁类水滑石表面Fe3+氧化,同时偶氮键断裂导致脱色.     

A Novel Kinetic Approach for Photocatalytic Degradation of Azo Dye with CdS and Ag/CdS Nanoparticles Fixed on a Cement Bed in a Continuous‐Flow Photoreactor

Azo dyes are one of the synthetic dyes that have been used in many textile industries. Azo dye and their intermediate products are toxic, carcinogenic, and mutagenic to aquatic life. Removal of azo dyes is one of the main challenges before releasing the wastes discharged by textile industries. Photocatalytic degradation of azo dyes by nanoparticles is one of the environment‐friendly methods used for the removal of dyes from textile effluents. Therefore, this study focused on degradation of azo dye, Direct Red 264. Photocatalytic degradation of DR 264 azo dye was investigated using CdS and Ag/CdS nanoparticles immobilized on a cement bed in a continuous‐flow photoreactor under UV‐C exposure. The effect of the parameters of type and mass of catalyst, temperature, flow rate, dye concentration, and light intensity were evaluated for azo dye removal. Under optimal conditions, photocatalytic degradation of DR 264 azo dye using Ag/CdS nanoparticles immobilized on a cement bed in a continuous‐flow photoreactor obtained an efficiency of 99.99%. A developed kinetic model was proposed based on the intrinsic elementary reactions. The proposed model is in a good agreement with the Langmuir–Hinshelwood (L–H) equation. The pseudo–steady‐state approximation has considered for the concentration of hydroxyl radicals associated with the L–H model under certain conditions and explains consistently the dependence of the apparent kinetic parameter, k_obs (the reaction rate constant), and K_R (the adsorption equilibrium constant) with the light intensity. Based on the model, k_obs for Ag/CdS was greater than the CdS nanoparticles.