Preparation of β2‐Homotryptophan Derivatives for β‐Peptide Synthesis

In view of the prominent role of the 1H‐indol‐3‐yl side chain of tryptophan in peptides and proteins, it is important to have the appropriately protected homologs H‐β² HTrp OH and H‐β³ HTrp OH (Fig.) available for incorporation in β‐peptides. The β²‐HTrp building block is especially important, because β²‐amino acid residues cause β‐peptide chains to fold to the unusual 12/10 helix or to a hairpin turn. The preparation of Fmoc and Z β²‐HTrp(Boc) OH by Curtius degradation (Scheme 1) of a succinic acid derivative is described (Schemes 2–4). To this end, the (S)‐4‐isopropyl‐3‐[(N‐Boc‐indol‐3‐yl)propionyl]‐1,3‐oxazolidin‐2‐one enolate is alkylated with Br CH₂CO₂Bn (Scheme 3). Subsequent hydrogenolysis, Curtius degradation, and removal of the Evans auxiliary group gives the desired derivatives of (R)‐H β²‐HTrp OH (Scheme 4). Since the (R)‐form of the auxiliary is also available, access to (S)‐β²‐HTrp‐containing β‐peptides is provided as well.     

Investigation of Synthetic Routes towards Derivatives of 3‐(Phenylsulfonimidoyl)propanoic Acid

The synthesis of a range of 3‐(phenylsulfonimidoyl)propanoate derivatives is described. A number of strategies for the imination of the key sulfoxide methyl 3‐(penylsulfinyl)propanoate are discussed including the use of O‐(mesitylsulfonyl)hydroxylamine (MSH) and iminoiodane reagents (Ph IN SO₂R). A successful strategy for the preparation of the target compounds was the use of MSH followed by in situ coupling with a N‐Boc‐protected amino acid. The pseudo‐dipeptides thus formed exhibited interesting conformational properties in CDCl₃ solution giving evidence of intramolecular H‐bonds in all cases, except for the proline derivative.     

Metabolism of Deuterated erythro‐Dihydroxy Fatty Acids in Saccharomyces cerevisiae: Enantioselective Formation and Characterization of Hydroxylactones

Epoxides of fatty acids are hydrolyzed by epoxide hydrolases (EHs) into dihydroxy fatty acids which are of particular interest in the mammalian leukotriene pathway. In the present report, the analysis of the configuration of dihydroxy fatty acids via their respective hydroxylactones is described. In addition, the biotransformation of (±)‐erythro‐7,8‐ and ‐3,4‐dihydroxy fatty acids in the yeast Saccharomyces cerevisiae was characterized by GC/EI‐MS analysis. Biotransformation of chemically synthesized (±)‐erythro‐7,8‐dihydroxy(7,8‐²H₂)tetradecanoic acid ((±)‐erythro‐ 1 ) in the yeast S. cerevisiae resulted in the formation of 5,6‐dihydroxy(5,6‐²H₂)dodecanoic acid ( 6 ), which was lactonized into (5S,6R)‐6‐hydroxy(5,6‐²H₂)dodecano‐5‐lactone ((5S,6R)‐ 4 ) with 86% ee and into erythro‐5‐hydroxy(5,6‐²H₂)dodecano‐6‐lactone (erythro‐ 8 ). Additionally, the α‐ketols 7‐hydroxy‐8‐oxo(7‐²H₁)tetradecanoic acid ( 9a ) and 8‐hydroxy‐7‐oxo(8‐²H₁)tetradecanoic acid ( 9b ) were detected as intermediates. Further metabolism of 6 led to 3,4‐dihydroxy(3,4‐²H₂)decanoic acid ( 2 ) which was lactonized into 3‐hydroxy(3,4‐²H₂)decano‐4‐lactone ( 5 ) with (3R,4S)‐ 5 =88% ee. Chemical synthesis and incubation of (±)‐erythro‐3,4‐dihydroxy(3,4‐²H₂)decanoic acid ((±)‐erythro‐ 2 ) in yeast led to (3S,4R)‐ 5 with 10% ee. No decano‐4‐lactone was formed from the precursors 1 or 2 by yeast. The enantiomers (3S,4R)‐ and (3R,4S)‐3,4‐dihydroxy(3‐²H₁)nonanoic acid ((3S,4R)‐ and (3R,4S)‐ 3 ) were chemically synthesized and comparably degraded by yeast without formation of nonano‐4‐lactone. The major products of the transformation of (3S,4R)‐ and (3R,4S)‐ 3 were (3S,4R)‐ and (3R,4S)‐3‐hydroxy(3‐²H₁)nonano‐4‐lactones ((3S,4R)‐ and (3R,4S)‐ 7 ), respectively. The enantiomers of the hydroxylactones 4, 5 , and 7 were chemically synthesized and their GC‐elution sequence on Lipodex^® E chiral phase was determined.     

Synthesis,Crystal Structure and Hydrolysis of a Novel Anhydrogalactosucrose: 2′‐Methoxyl‐O‐1′,4′:3′,6′‐dianhydro‐β‐D‐fructofuranosyl 3,6‐anhydro‐4‐chloro‐4‐deoxy‐α‐D‐galactopyranoside

A novel anhydrogalactosucrose derivative 2′‐methoxyl‐O‐1′,4′:3′,6′‐dianhydro‐β‐D‐fructofuranosyl 3,6‐anhydro‐4‐chloro‐4‐deoxy‐α‐D‐galactopyranoside ( 4 ) was prepared from 3,6:1′,4′:3′,6′‐trianhydro‐4‐chloro‐4‐deoxy‐galactosucrose ( 3 ) via a facile method and characterized by ¹H NMR, ¹³C NMR and 2D NMR spectra. The single crystal X‐ray diffraction analysis shows that the title molecule forms a two thee‐dimensional network structure by two kinds of hydrogen bond interactions [O(2) H(2)···O(7), O(5) H(5)···O(8)]. Its stability was investigated by acid hydrolysis reaction treated with sulfuric acid, together with the formation of 1,6‐Di‐O‐methoxy‐4‐chloro‐4‐deoxy‐β‐D‐galactopyranose ( 5 ) and 2,2‐Di‐C‐methoxy‐1,4:3,6‐dianhydromannitol ( 6 ). According to the result, the relative stability of the ether bonds in the structure is in the order: C(1) O C(5)≈C(3′) O C(6′)≈C(1′) O C(4′)>C(3) O C(6)≈C(1) O C(2′)>C(2′) O C(5′).     

Theoretical study on electronic structure of (CNC)Fe_2N2 and its N2 elimination mechanism

The density function theory (DFT) is to elucidate the electronic structure of bis(dinitrogen) Fe(0) complex, (CNC)Fe_2N₂, and its N₂ elimination mechanism. (CNC)Fe_2N₂ has a low‐spin singlet (S = 0) ground state with a distorted square pyramidal structure. Fragment orbital interaction analysis yields total occupancy of π* orbitals (LUF₍₄₎O and LUF₍₄₎O−1) of apical N3 N4 is 0.188 while that of basal N1 N2 is 0.187 in ^S0(CNC)Fe_2N₂, suggesting nearly the same activation extent for both basal and apical N₂ ligands. The lowest‐lying triplet state T₁ (3‐A′) has a repulsive potential energy surface along the Fe N3 bong length by PBE functional, while a minimum on T₂ state (3‐A″) with higher energy is found by B3LYP functional. The nonadiabatic N₂ elimination mechanism of (CNC)Fe_2N₂ involves an S₀‐T₁ states crossing, which lowers the activation energy to 9.7 kcal/mol and produces high‐spin intermediate (CNC)Fe N₂. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Studies on the synthesis and properties of ferroelectric side chain liquid crystalline polyoxetanes

Two series of novel ferroelectric liquid crystalline (FLC) monomers were derived from 3-(hydroxymethyl)-3-methyloxetane, used as the backbone unit, and 2-(S)-[2-(S)-methylbutoxy]propionic acid, as a chiral moiety. The corresponding polyoxetanes were prepared by ring-opening polymerization using BF₃ · OEt₂ as an initiator. In addition to the structure identification, their liquid crystal phase behavior and electrical properties are also studied. Before their connection to the chiral molecular moiety, two series of carboxylic acids, 4-(6-[(3-methyloxetan-3-yl)methoxy]alkoxy)-benzoic acids and 4,4′-[6-(3-methyloxetan-3-yl)alkoxy]biphenylcarboxylic acids, show the phase sequence K Sc I and K Sc N I, respectively. After connection, the phase behavior of the corresponding chiral monomers is changed from K Sc I to K Sc* N* I as well as from K Sc N I to K Sc* Sa I. Only the phase sequence K Sc* Sa I is observed in both series of polyoxetanes. All of the synthesized monomers exhibited enantiotropic chiral smectic C(Sc*) phase. The monomers, with the biphenyl unit linked directly with a chiral center, possessed higher spontaneous polarization (P_s) values. Polyoxetanes possess a wide temperature range for the liquid crystal phase, about 120°C, and the Sc* phase range can be up to 95°C. However, the position of the biphenyl unit will not affect the spontaneous polarization of the synthesized side chain FLC polyoxetanes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2843–2855, 1997     

New dithiazinanes and bis‐dithiazinanes‐bearing pendant ethylamines: Structure and reactivity

The structure and reactivity of a series of new ethylaminedithiazinanes and bis‐diethylaminedithiazinanes synthesized from formaldehyde, NaSH, and N,N‐dimethyl‐ethylene‐diamine ( 1 ), N‐methyl‐ethylene‐diamine ( 2 ), and N‐ethyl‐ethylene‐diamine ( 3 ) are reported. Compound 1 afforded 2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene‐N,N‐dimethyl‐amine ( 4 ). The reaction of 4 with dry CH₂Cl₂ gave N‐{2‐([1,3,5]dithiazinan‐5‐yl)‐ethylene}‐N‐chloromethyl‐N,N‐dimethyl‐ammonium chloride ( 5 ) in high yield, whereas in wet CH₂Cl₂ and DMSO provided a mixture of 5 with N‐{2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene}‐N,N‐dimethyl‐ammonium hydrochloride ( 6 ).bis‐{2‐([1,3,5]‐Dithiazinan‐5‐yl)‐ethylene‐N‐alkyl‐amino}‐methylene‐disulfides ( 7 ) and ( 8 ) formed by two dithiazinanes linked through the chain  (CH₂)₂ NRCH₂ S S CH₂ NR (CH₂)₂‐ ( 7 R = methyl, 8 R = ethyl) reacted with CH₂Cl₂ giving after neutralization of the hydrolysis products the ethylaminedithiazinanes with different pendant N‐groups [ (CH₂)₂NMeH₂⁺( 9 );  (CH₂)₂NEtH₂⁺ ( 10 );  (CH₂)₂NMeH ( 11 );  (CH₂)₂NEtH ( 12 );  (CH₂)₂NMeHBH₃ ( 13 )  (CH₂)₂NEtHBH₃ ( 14 ).  (CH₂)₂NMe₂BH₃ ( 15 ), and  (CH₂)₂NEtMeBH₃.( 16 )]. The x‐ray diffraction analyses of compounds 5 , 6 , 9 , and 10 are reported. Variable temperature NMR experiments afforded the Δ G^≠ of the ring interconversion of the six‐membered heterocycles 6 , 9 , and 10 . © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:59–71, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20657     

Enantioselective ortho‐C?H Cross‐Coupling of Diarylmethylamines with Organoborons

The commonly used para‐nitrobenzenesulfonyl (nosyl) protecting group is employed to direct the C H activation of amines for the first time. An enantioselective ortho‐C H cross‐coupling between nosyl‐protected diarylmethylamines and arylboronic acid pinacol esters has been achieved utilizing chiral mono‐N‐protected amino acid (MPAA) ligands as a promoter.     

Metabolism of Deuterated threo‐Dihydroxy Fatty Acids in Saccharomyces cerevisiae: Enantioselective Formation and Characterization of Hydroxylactones and γ‐Lactones

Biotransformation of (±)‐threo‐7,8‐dihydroxy(7,8‐²H₂)tetradecanoic acids (threo‐(7,8‐²H₂)‐ 3 ) in Saccharomyces cerevisiae afforded 5,6‐dihydroxy(5,6‐²H₂)dodecanoic acids (threo‐(5,6‐²H₂)‐ 4 ), which were converted to (5S,6S)‐6‐hydroxy(5,6‐²H₂)dodecano‐5‐lactone ((5S,6S)‐(5,6‐²H₂)‐ 7 ) with 80% e.e. and (5S,6S)‐5‐hydroxy(5,6‐²H₂)dodecano‐6‐lactone ((5S,6S)‐5,6‐²H₂)‐ 8 ). Further β‐oxidation of threo‐(5,6‐²H₂)‐ 4 yielded 3,4‐dihydroxy(3,4‐²H₂)decanoic acids (threo‐(3,4‐²H₂)‐ 5 ), which were converted to (3R,4R)‐3‐hydroxy(3,4‐²H₂)decano‐4‐lactone ((3R,4R)‐ 9 ) with 44% e.e. and converted to ²H‐labeled decano‐4‐lactones ((4R)‐(3‐²H₁)‐ and (4R)‐(2,3‐²H₂)‐ 6 ) with 96% e.e. These results were confirmed by experiments in which (±)‐threo‐3,4‐dihydroxy(3,4‐²H₂)decanoic acids (threo‐(3,4‐²H₂)‐ 5 ) were incubated with yeast. From incubations of methyl (5S,6S)‐ and (5R,6R)‐5,6‐dihydroxy(5,6‐²H₂)dodecanoates ((5S,6S)‐ and (5R,6R)‐(5,6‐²H₂)‐ 4a ), the (5S,6S)‐enantiomer was identified as the precursor of (4R)‐(3‐²H₁)‐ and (2,3‐²H₂)‐ 6 ). Therefore, (4R)‐ 6 is synthesized from (3S,4S)‐ 5 by an oxidation/keto acid reduction pathway involving hydrogen transfer from C(4) to C(2). In an analogous experiment, methyl (9S,10S)‐9,10‐dihydroxyoctadecanoate ((9S,10S)‐ 10a ) was metabolized to (3S,4S)‐3,4‐dihydroxydodecanoic acid ((3S,4S)‐ 15 ) and converted to (4R)‐dodecano‐4‐lactone ((4R)‐ 18 ).     

Cyclic sulfur nitrogen compounds and phosphorus reagents: Part XII. Reactions of S4N4 with (2-pyridylamino) phosphines [1]

Tetrasulfurtetranitride, S₄N₄ reacts with (2-pyridylamino)-diphenylphosphine in MeCN at room temperature to form the cyclotrithiazene (NC₅H₄NH)-Ph₂PN S₃N₃ ( 1 ) in good yield. By contrast, the cyclophosphathiazenes Ph₂PS₂N₃ ( 2 ) and 1,5(Ph₂P)₂S₂N₄ ( 3 ) are isolated from the same reaction mixture under reflux conditions. In solution, compound 1 is found to be transformed into 2 . The reaction of S₄N₄ with (2-pyridylamino)phenyl(dicyclohexylamino)phosphine in MeCN at room temperature affords Ph(DCA)PS₂N₃ ( 4 ) (DCA = dicylohexylamino) as the only reaction product. This on treatment with norbornadiene produces the addition product Ph(DCA)PS₂N₃·C₇H₈ ( 5 ). The structure of 4 has been established by X-ray diffraction. Its PSN ring adopts a skew boat conformation with S N bond lengths varying from 1.574(4) to 1.606(4) Å. The mean value of the endocyclic P N bonds amounts to 1.618(3) Å.     

Diastereomeric differentiation of norbornene amino acid peptides by electrospray ionization tandem mass spectrometry

A new class of diastereomeric pairs of non‐natural amino acid peptides derived from butyloxycarbonyl (Boc‐)protected cis‐(2S,3R)‐ and trans‐(2S,3S)‐β‐norbornene amino acids including a monomeric pair have been investigated by electrospray ionization (ESI) tandem mass spectrometry using quadrupole time‐of‐flight (Q‐TOF) and ion‐trap mass spectrometers. The protonated cis‐BocN‐β‐nbaa (2S,3R) (1) (βnbaa = β‐norbornene amino acid) eliminates the Boc group to form [M+H–Boc+H]⁺, whereas an additional ion [M+H–C₄H₈]⁺ is formed from trans‐BocN‐β‐nbaa (2S,3S) (2). Similarly, it is observed that the peptide diastereomers (di‐, tri‐ and tetra‐), with cis‐BocN‐β‐nbaa (2S,3R)‐ at the N‐terminus, initially eliminate the Boc group to form [M+H–Boc+H]⁺ which undergo further fragmentation to give a set of product ions that are different for the peptides with trans‐BocN‐β‐nbaa (2S,3S)‐ at the N‐terminus. Thus the Boc group fragments differently depending on the configuration of the amino acid present at the N‐terminus. It is also observed that the peptide bond cleavage in these peptides is less favoured and most of the product ions are formed due to retro‐Diels‐Alder fragmentation. Interestingly, sodium‐cationized peptide diastereomers mainly yield a series of retro‐Diels‐Alder fragment ions which are different for each diastereomer as they are formed starting from [M+Na–Boc+H]⁺ in peptides with cis‐BocN‐β‐nbaa (2S,3R)‐ at the N‐terminus, and [M+Na–C₄H₈]⁺ in peptides with trans‐BocN‐β‐nbaa (2S,3S)‐ at the N‐terminus. All these results clearly indicate that these diastereomeric pairs of peptides yield characteristic product ions which help distinguish the isomers. Copyright © 2009 John Wiley & Sons, Ltd.     

Cyclic S?N compounds and phosphorus reagents: Part X. Synthesis and characterization of phosphinimino-substituted S?N heterocycles

Room temperature reactions of S₄N₄ with (amino) diphenylphosphines, (R)Ph₂P, have basically yielded two different types of S N heterocycles under two different stoichiometric conditions. Phosphiniminocyclotrithiatriazenes, (R)Ph₂PN S₃N₃ (R = C₄H₈N , C₅H₁₀N , C₆H₁₂N , CH₃NC₄H₈N , (C₆H₁₁)₂ N , and (C₆H₅CH₂)₂N ) have been obtained (yield 45–76%) from a 1:2 mole ratio (S₄N₄:(R)Ph₂P) reaction, while the disubstituted S₄N₄ derivatives, 1,5-[Ph₂(R)PN]₂S₄N₄ (R = C₄N₈N , C₅H₁₀N , and C₆H₁₂N ) have been obtained (yield 30–45%) only from a 1:3.5–4 mole ratio reaction. All the 1,5-[Ph₂(R)PN]₂S₄N₄ derivatives prepared in this study undergo a room temperature solution phase transformation to the corresponding (R)Ph₂PN S₃N₃ heterocycles.     

Preferred 3D‐Structure of Peptides Rich in a Severely Conformationally Restricted Cyclopropane Analogue of Phenylalanine

Terminally blocked, homo‐peptide amides of (R,R)‐1‐amino‐2,3‐diphenylcyclopropane‐1‐carboxylic acid (c₃diPhe), a chiral member of the family of C^α‐tetrasubstituted α‐amino acids, from the dimer to the tetramer, and diastereomeric co‐oligopeptides of (R,R)‐ or (S,S)‐c₃diPhe with (S)‐alanine residues to the trimer level were prepared in solution and fully characterized. The synthetic effort was extended to terminally protected co‐oligopeptide esters to the hexamer, where c₃diPhe residues are combined with achiral α‐aminoisobutyric acid residues. The preferred conformations of the peptides were assessed in solution by FT‐IR absorption, NMR, and CD techniques, and for seven oligomers in the crystal state (by X‐ray diffraction) as well. This study clearly indicates that c₃diPhe, a sterically demanding cyclopropane analogue of phenylalanine, tends to fold peptides into β‐turn and 3₁₀‐helix conformations. However, when c₃diPhe is in combination with other chiral residues, the conformation preferred by the resulting peptides is also dictated by the chiral sequence of the amino acid building blocks. The (S,S)‐enantiomer of this α‐amino acid, unusually lacking asymmetry in the main chain, strongly favors the left‐handedness of the turn/helical peptides formed.     

Halogen bonding between substituted chlorobenzene and trimethylamine: Decisive role of σ–hole and C?Cl bond breaking energy

Theoretical studies have been carried out on the halogen bonding interaction between para substituted chlorobenzene (Y C₆H₄Cl, Y = H, NH₂, CH₃, F, CN, NO₂) and N(CH₃)₃ using ab initio MP2/aug‐cc‐pVDZ and DFT based wB97XD/6‐311++G(d,p) methods. The positive electrostatic potential (V_S,max) on the Cl atom and the heterolytic bond breaking enthalpy of the C Cl bond have been calculated and their role on halogen bonding is discussed. The heterolytic bond breaking enthalpy of the C Cl bond is proposed as a measure of the strength of the σ‐hole on Cl atom. The binding strength of the complexes ranging between −6.13 kJ mol⁻¹ and −9.29 kJ mol⁻¹ are linearly related to the V_S,max of the Cl atom and the bond breaking enthalpy of the C Cl bond. In addition, energy decomposition analysis was performed on the halogen bonded complexes via symmetry adapted perturbation theory (SAPT) to predict the dominant energy component and the nature of the N···Cl interaction.     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Spontaneous Aminoacylation of a RNA Sequence Containing a 3′‐Terminal 2′‐Thioadenosine

We report the synthesis of a modified 8mer RNA sequence, (C‐C‐C‐C‐A‐C‐C‐(2′‐thio)A)‐RNA 5′‐(dihydrogen phosphate) ( 9 ) containing a 3′‐terminal 2′‐thioadenosine (Schemes 2 and 3), and its spontaneous and site‐specific aminoacylation with the weakly activated amino acid thioester H Phe SPh ( 12 ). This reaction, designed in analogy to the ‘native chemical ligation’ of oligopeptides, occurs efficiently in buffered aqueous solutions and under a wide range of conditions (Table). At pH values between 5.0 and 7.4, two products, the 3′‐O‐monoacylated and the 3′‐O,2′‐S‐diacylated RNA sequences 10 and 11 are formed fast and quantitatively (Scheme 4). At pH 7.4 and 37°, the 3′‐O‐monoacylated product 10 is formed as major product in situ by selective hydrolysis of the O,S‐diacylated precursor 11 . Additionally, the preparation and isolation of the relevant 3′‐O‐monoacylated product 10 was optimized at pH 5. The here presented concept could be employed for a straightforward aminoacylation of analogously modified tRNAs.     

Synthesis and Crystal Structure of Peptide‐2,2′‐Biphenyl Hybrids

1,1′‐Biphenyl derivatives with amino acid/peptide substitution at C(2) and C(2′) (‘peptide‐biphenyl hybrids', 6 – 8 ) have been prepared by direct N‐acylation of amino acid/peptide derivatives with 1,1′‐biphenyl‐2,2′‐dicarbonyl dichloride ( 5 ). Both conformers, which arise from the rotation around the aryl aryl bond, have been detected by ¹H‐NMR spectroscopy. Single atropisomers of each 6 ((R)‐configuration at the stereogenic axis) and 7 ((S)‐configuration at the stereogenic axis) have been obtained in quantitative yield by slow evaporation of methanolic solutions. The procedures are dynamic atropselective resolutions (asymmetric transformations of the second kind). The crystal structures of the peptide‐biphenyl hybrids 6 and 7 show highly ordered molecular and supramolecular structures with extensive intramolecular and intermolecular H‐bonding.     

Absolute configuration of strictosidinic acid

The absolute configuration of strictosidinic acid, (2S,3R,4S)‐3‐ethenyl‐2‐(β‐d ‐glucopyranosyloxy)‐4‐{[(1S)‐2,3,4,9‐tetrahydro‐1H‐pyrido[3,4‐b]indol‐1‐yl]methyl}‐3,4‐dihydro‐2H‐pyran‐5‐carboxylate, was determined from its sodium chloride trihydrate, poly[[diaqua((2S,3R,4S)‐3‐ethenyl‐2‐(β‐d ‐glucopyranosyloxy)‐4‐{[(1S)‐2,3,4,9‐tetrahydro‐1H‐pyrido[3,4‐b]indol‐2‐ium‐1‐yl]methyl}‐3,4‐dihydro‐2H‐pyran‐5‐carboxylate)sodium] chloride monohydrate], {[Na(C₂₆H₃₂N₂O₉)(H₂O)₂]Cl·H₂O}_n. The strictosidinic acid molecule participates in intermolecular hydrogen bonds of the O—H...O and O—H...Cl types. The solid‐state conformation was observed as a zwitterion, based on a charged pyridine N atom and a carboxylate group, the latter mediating the packing through coordination with the sodium cation.     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Triorganotin(IV) complexes containing multifunctional meso‐dimercaptosuccinic acid ligand: Syntheses,characterizations, and crystal structures

Four triorganotin complexes of the types [(R₃Sn)₂(C₂H₂S₂)(COOH)₂] ⋅ 2Et₂O (R = Ph, 1 ) and (R₃Sn)₂(C₂H₂S₂)(COOH)₂ (R = Me 2 , R = n‐Bu 3 , and R = PhCH₂ 4 ) have been obtained by the reaction of meso‐dimercaptosuccinic acid and sodium ethoxide with triorganotin(IV) chloride in 1:2:2 stoichiometry. All the complexes were characterized by elemental analyses, IR spectroscopy, and NMR spectroscopy. Furthermore, complexes 1 and 2 were characterized by X‐ray diffraction analyses, which revealed that complexes 1 and 2 are mononuclear structures and further interlinked by intermolecular C H⋅⋅⋅O and O H⋅⋅⋅O hydrogen bonds, respectively. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:50–55, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20511