Two‐Dimensional Acetylenic Scaffolding: Extended Donor‐Substituted Perethynylated Dehydroannulenes

Starting from (Z)‐bis(N,N‐diisopropylanilino)‐substituted tetraethynylethene (TEE), perethynylated octadehydro[12]‐ and dodecadehydro[18]annulenes were prepared by oxidative Hay coupling. The dodecadehydro[18]annulene with six peripheral N,N‐diisopropylanilino substituents was characterized by X‐ray crystallography. Elongation of the Z‐bisdeprotected TEE by Cadiot–Chodkiewicz coupling with 1‐bromo‐2‐(triisopropylsilyl)ethyne provided a Z‐configured bis(butadiyne), which after alkyne deprotection afforded under Hay coupling conditions N,N‐diisopropylanilino‐substituted perethynylated hexadecadehydro[20]‐ and tetracosadehydro[30]an‐nulenes. The diisopropylanilino substituents enhance the properties of these unprecedented all‐carbon perimeters in several distinct ways. They ensure their solubility, increase their stability, and importantly, engage in strong intramolecular charge‐transfer interactions with the electron‐accepting all‐carbon cores, resulting in intense, bathochromically shifted charge‐transfer bands in the UV/Vis spectra. The charge‐transfer character of these bands was confirmed by protonation‐neutralization experiments. The redox properties of the new carbon‐rich chromophores were investigated by cyclic voltammetry and rotating disk voltammetry, which indicated different redox behavior for aromatic (4n+2 π electrons) and antiaromatic (4n π electrons) dehydroannulenes.     

Three‐Dimensional Printing with Biomass‐Derived PEF for Carbon‐Neutral Manufacturing

Biomass‐derived poly(ethylene‐2,5‐furandicarboxylate) (PEF) has been used for fused deposition modeling (FDM) 3D printing. A complete cycle from cellulose to the printed object has been performed. The printed PEF objects created in the present study show higher chemical resistance than objects printed with commonly available materials (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), glycol‐modified poly(ethylene terephthalate) (PETG)). The studied PEF polymer has shown key advantages for 3D printing: optimal adhesion, thermoplasticity, lack of delamination and low heat shrinkage. The high thermal stability of PEF and relatively low temperature that is necessary for extrusion are optimal for recycling printed objects and minimizing waste. Several successive cycles of 3D printing and recycling were successfully shown. The suggested approach for extending additive manufacturing to carbon‐neutral materials opens a new direction in the field of sustainable development.     

1,1,2,2-Tetraethynylethanes: Synthons for Tetraethynylethenes and Modules for Acetylenic Molecular Scaffolding

The synthesis of functionalized 1,1,2,2-tetraethynylethanes (= 3,4-diethynylhexa-1,5-diynes) as synthons for tetraethynylethenes (3,4-diethynylhex-3-ene-1,5-diynes) and as building blocks for three-dimensional acetylenic molecular scaffolding targeting the synthesis of the molecular carbon belts 3 and 4 is reported (Scheme 1). Reaction of diethyl oxalate and (trialkylsilyl)ethynyl Grignard reagents afforded the silyl-protected 3,4-diethynylhexa-1,5-diyne-3,4- diols 7 and 8 which were transformed in high yields into the cyclic carbonate 9 and the cyclic orthoesters 10–13 , respectively (Scheme 2). The solid-state structures of 9 and 10 were elucidated by X-ray crystallography. The alkyne protecting groups in 9, 10 , and 12 were smoothly removed to give the free tetraynes 14–16 as relatively stable oils in nearly quantitative yields (Scheme 3). Orthoesters 15 and 16 underwent Pd-catalyzed cross-coupling with iodobenzene to give the tetraphenyl derivatives 17 and 18 (Scheme 4). Thermal acid-catalyzed elimination of the orthoester moieties in 12 and 13 produced the silyl-protected tetraethynylethenes 19 and 20 and concluded a novel, simple three-step synthesis of these fully two-dimensionally conjugated π-chromophores (Scheme 5).     

A Three‐Dimensional Lead 2,6‐Dihydroxybenzoate with Channels

A lead 2,6‐dihydroxybenzoate of the formula Pb(C₁₄H₁₀O₈) ( I ) has been synthesized and characterized by X‐ray crystallography and spectroscopic techniques. (crystal data: monoclinic, space group = Cc (no. 9), a = 11.2155(2), b = 9.2942(2), c = 13.5112(3) Å, β = 96.510(1)°, V = 1399.31(5) ų, Z = 4). This is the first three‐dimensional metal dihydroxybenzoate structure, comprising 3,6‐connected periodic net and having channels with the dimensions 3.8 × 3.8Å and 10.8 × 3.8Å. The coordination of the PbO₈ polyhedron is holodirected and the electron lone pair of the lead is, therefore, not manifested in I . It exhibits photoluminescence in the violet, green and red when excited at 240, 390 and 525 nm, respectively.     

A Molecular Nanotube with Three‐Dimensional π‐Conjugation

A π‐conjugated twelve‐porphyrin tube is synthesized in 32 % yield by a template‐directed coupling reaction that joins together six porphyrin dimers, forming twelve new C? C bonds. The nanotube has two bound templates, enclosing an internal volume of approximately 4.5 nm³. Its UV/Vis/NIR absorption and fluorescence spectra resemble those of a previously reported six‐porphyrin ring, but are red‐shifted by approximately 300 cm^?1, reflecting increased conjugation. Ultrafast fluorescence spectroscopy demonstrates extensive excited‐state delocalization. Transfer of electronic excitation from an initially formed state polarized in the direction of the nanotube axis (z axis) to an excited state polarized in the xy plane occurs within 200 fs, resulting in a negative fluorescence anisotropy on excitation at 742 nm.     

Two‐Dimensional and Three‐Dimensional Lanthanide Coordination Polymers Built from 4‐Hydroxypyridine‐2,6‐dicarboxylic Acid Ligand

4‐Hydroxypyridine‐2,6‐dicarboxylic acid (H₃CAM) reacts with Ln₂O₃(Ln = La, Ce) or Ln(NO₃)₃ (Ln = Sm, Dy, Gd, Ho) in hydrothermal reactions to form a series of lanthanide coordination polymers 1 – 6 . Elemental analysis, IR spectra and X‐ray crystal structure analysis were carried out to determine the composition and crystal structure of 1 – 6 . Compounds 1 and 2 are isostructural and contain tetranuclear metallic ring unit and 3D framework. 4 – 6 are isostructural contain 2D network. Furthermore, the photoluminescent properties of 3 and 4 at room temperature were also studied.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

Tandem Three‐Component Synthesis of syn‐1,2‐ and syn‐1,3‐Diol Derivatives

The development of efficient methods for stereocontrolled synthesis of polyol derivatives has been of continuing interest for the synthetic community. We describe herein tandem olefin cross‐metathesis/hemiacetalization/intramolecular oxa‐Michael addition of allylic/homoallylic alcohols, α,β‐unsaturated ketones, and aldehydes, which enabled the synthesis of syn‐1,2‐ and syn‐1,3‐diol derivatives in a step‐economical manner. A series of differentially protected polyol derivatives could be obtained in subsequent transformations via chemoselective/regioselective cleavage of the acetal moiety of the tandem reaction products.     

Multifunctional Stimuli Responsive ABC Terpolymers: From Three‐Compartment Micelles to Three‐Dimensional Network

Summary: A highly asymmetric P2VP₅₈‐PAA₉₂₄‐PBMA₄₈ double hydrophilic block terpolymer exhibits a rich phase behavior as a function of pH. In acidic media (pH 1) three compartment micelles with a positively charged outer corona are formed. At high pH, the above structure is transformed into a three‐dimensional transient network constituted of hydrophobic domains interconnected with negatively charged bridging chains (PAA chains). At even higher pH (14) the network is disrupted and finally exhibits a closed loop sol–gel–sol behavior.

AFM images of P2VP₅₈‐PAA₉₂₄‐PBMA₄₈ micellar self assemblies deposited on mica.     

Isostructural Three‐Dimensional Covalent Organic Frameworks

Herein, we reported the designed synthesis of three isostructural three‐dimensional covalent organic frameworks (3D COFs) with ‐H, ‐Me, or ‐F substituents, which have similar crystallinity and topology. Their crystal structures were determined by continuous rotation electron diffraction (cRED), and all three 3D COFs were found to adopt a fivefold interpenetrated pts topology. More importantly, the resolution of these cRED datasets reached up to 0.9–1.0 Å, enabling the localization of all non‐hydrogen atomic positions in a COF framework directly by 3D ED techniques for the first time. In addition, the precise control of the pore environments through the use of different functional groups led to different selectivities for CO₂ over N₂. We have thus confirmed that polycrystalline COFs can be definitely studied to the atomic level as other materials, and this study should also inspire the design and synthesis of 3D COFs with tailored pore environments for interesting applications.     

GC3: Comprehensive Three‐Dimensional Gas Chromatography

Comprehensive three‐dimensional gas chromatography (GC³) is demonstrated using modified GC×GC apparatus. A new thermal modulation scheme employing a single moving heater to operate two thermal modulators is introduced. Considerations of the bandwidth/resolution tradeoff of GC³ show that high‐speed tertiary columns would make GC³ practical, with modest loss of underlying GC×GC peak capacity.