Influence of NaOH,HCl, NaCl,and CaCl<Subscript>2</Subscript> electrolytes on aggregation stability of aqueous craft lignin dispersion according to data of filtration through track membranes

The method of filtration through track membranes with different capillary diameters (50–2500 nm) is used to study the aggregation stability of dilute (10 mg/l) aqueous dispersions of craft lignin in NaCl and CaCl₂ solutions (0–10⁻¹ mol/l) at pH 9.5–2.0. It is shown that, in the absence of salts, the isolation of craft lignin on filters increases at decreasing pH, i.e., upon approaching the isoelectric point of craft lignin (pH 2.0). The addition of the salts enhances the efficiency of craft lignin rejection, which is higher in the case of CaCl₂. The sizes of craft lignin aggregates in solutions of different compositions are determined from the obtained data.     

Electrocatalytic oxidation of pyridoxine (vitamin B<Subscript>6</Subscript>) on aluminum electrode modified by metallic palladium particles/iron (III) hexacyanoferrate (II) film

The electrocatalytic activity of a Prussian blue (PB) film on the aluminum electrode by taking advantage of the metallic palladium characteristic as an electron-transfer bridge (PB/Pd–Al) for electrooxidation of 2-methyl-3-hydroxy-4,5-bis (hydroxyl–methyl) pyridine (pyridoxine) is described. The catalytic activity of PB was explored in terms of Fe^III [Fe^III (CN)₆]/Fe^III [Fe^II (CN)₆]¹⁻ system. The best mediated oxidation of pyridoxine (PN) on the PB/Pd–Al-modified electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 6 at scan rate of 20 mV s⁻¹. The mechanism and kinetics of the catalytic oxidation reaction of PN were monitored by cyclic voltammetry and chronoamperometry. The results were explained using the theory of electrocatalytic reactions at chemically modified electrodes. The charge transfer-rate limiting reaction step is found to be a one-electron abstraction, whereas a two-electron charge transfer reaction is the overall oxidation reaction of PN by forming pyridoxal. The value of α, k, and D are 0.5, 1.2 × 10² M⁻¹ s⁻¹, and 1.4 × 10⁻⁵ cm² s⁻¹, respectively. Further examination of the modified electrodes shows that the modifying layers (PB) on the Pd–Al substrate have reproducible behavior and a high level of stability after posing it in the electrolyte or Pyridoxine solutions for a long time.     

Phase transition and thermal decomposition of [Al(DMSO)<Subscript>6</Subscript>]Cl<Subscript>3</Subscript>

Phase transition and thermal decomposition of hexadimethylsulfoxidealuminium chloride were studied by differential scanning calorimetry (DSC), thermogravimetry (TG) and simultaneous differential thermal analysis (SDTA). The gaseous products of the decomposition were on-line identified by a quadrupole mass spectrometer (QMS). In the temperature range of 95–300 K, [Al(DMSO)₆]Cl₃ indicates one phase transition at T _c^h=244.96 K (on heating) and at T _c^c=220.87 K (on cooling). Large thermal hysteresis of the phase transition (∼24 K) indicates its first order character. Large value of transition entropy (ΔS≈40 J mol⁻¹ K⁻¹) suggests its configurational character. Thermal decomposition of the title compound proceeds in four main stages. In the first stage, which starts just above ca. 300 K, the compound loses two DMSO molecules per one formula unit and undergoes into [Al(DMSO)₄]Cl₃. In the second stage, the next three DMSO ligands are released and simultaneously decomposed. The third stage, which continues up to ca. 552 K, is connected with a loss of the last DMSO ligand and the formation of AlCl₃. In the fourth stage AlCl₃ reacts with carbon monoxide that originates from the decomposition of DMSO, and first aluminium oxychloride and next solid Al₂O₃ plus carbon are created.     

Determination of ultra-trace amounts of inorganic selenium species in natural water by ion chromatography-inductively coupled plasma-mass spectrometry coupled with nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid phase extraction

This work presents a nano-Al₂O₃ solid phase extraction technique for the determination of ultra-trace amounts of inorganic selenium species in aqueous systems using ion chromatography inductively coupled plasma-mass spectrometry (IC-ICP-MS). In this experiment, the inorganic selenium species were successfully extracted on a nano-Al₂O₃ solid phase column and then quantitative eluted with a 100 mmol L⁻¹ NaOH solution. Extraction conditions such as solvent identity, solvent concentration, solvent volume, solvent pH and salt addition were optimized. Under the optimum extraction conditions (elute solvent: 100 mmol L⁻¹ NaOH, solvent volume: 4 mL, pH: 7.0), low detection limits (Se (IV): 6 ng L⁻¹, Se (VI): 11 ng L⁻¹; RSD<5.0%) and good linear range (0.5–100 ng mL⁻¹, R² > 0.999) were obtained for all of the analytes. Good spiked recoveries over the range of 80–98% were obtained by applying the proposed method on real environmental water samples. These results indicated that this method is very sensitive and reliable when monitoring trace levels of inorganic selenium species in aqueous samples.      

Aqueous sol–gel processing of precursor oxides for ZrW<Subscript>2</Subscript>O<Subscript>8</Subscript> synthesis

This paper describes the synthesis of ZrW₂O₈ by the use of an aqueous citrate-gel method in order to prepare a fine, pure and homogeneous oxide mixture suitable for ceramic processing. The thermal expansion coefficient thus obtained for α-ZrW₂O₈ is −10.6 × 10⁻⁶ °C⁻¹ (50–125 °C) whereas for the β-ZrW₂O₈ a value of −3.2 × 10⁻⁶ °C⁻¹ (200–300 °C) is obtained. The advantages of the use of a sol–gel method is expressed in the very homogeneous end-products. The paper describes crystallographic data, morphological structure and the thermal expansion properties of the ZrW₂O₈ material. Moreover, photoluminescence and photochromic properties specific to the precursor gel are described and analyzed. These effects support our views that the precursors show homogeneity up to nanometer level.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Synthesis and supercapacitance of flower-like Co(OH)<Subscript>2</Subscript> hierarchical superstructures self-assembled by mesoporous nanobelts

A facile hydrothermal strategy was first proposed to synthesize flower-like Co(OH)₂ hierarchical microspheres. Further physical characterizations revealed that the flower-like Co(OH)₂ microspherical superstructures were self-assembled by one-dimension nanobelts with rich mesopores. Electrochemical performance of the flower-like Co(OH)₂ hierarchical superstructures were investigated by cyclic voltammgoram, galvanostatic charge–discharge and electrochemical impedance spectroscopy in 3 M KOH aqueous electrolyte. Electrochemical data indicated that the flower-like Co(OH)₂ superstructures delivered a specific capacitance of 434 F g⁻¹ at 10 mA cm⁻² (about 1.33 A g⁻¹), and even kept it as high as 365 F g⁻¹ at about 5.33 A g⁻¹. Furthermore, the SC degradation of about 8% after 1,500 continuous charge–discharge cycles at 5.33 A g⁻¹ demonstrates their good electrochemical stability at large current densities.     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Ionic conductivity of bismuth oxofluoride BiO<Subscript>0.1</Subscript>F<Subscript>2.8</Subscript> with tysonite-type structure (LaF<Subscript>3</Subscript>)

The complex impedance method in the temperature range of 291–660 K was used to study conductivity of oxofluoride BiO_0.1F_2.8 belonging to the tysonite structural type (LaF₃). Bismuth oxofluoride was synthesized using a solid-phase method at 770–870 K for 1–2 h in an argon atmosphere. Heterovalent substitution of fluoride ions F⁻ by oxygen ions O²⁻ in the anionic BiF₃ matrix sublattice results in high ionic conductivity (∼0.1 S/cm at 660 K) of BiO_0.1F_2.8 ceramic samples.     

In situ study of the interaction between <Emphasis Type="Italic">tert</Emphasis>-butyl chloride and aluminum activated with liquid In-Ga eutectic

The interaction between tert-butyl chloride and activated aluminum was studied by attenuated total reflectance Fourier transform infrared spectroscopy near room temperature (18–25°C). A long induction period of ∼240–260 min was observed. The ionic aluminum chloride complexes [Al _n Cl_3n+1]⁻ (n = 1, 2) and the molecular species AlCl₃ were identified at the activated aluminum/tert-butyl chloride interface during the reaction. The formation of the ion in the AlCl₄⁻ ion in the liquid medium and the presence of the same ion and a molecular AlCl₃-tert-butyl chloride complex in the resinous products of the reaction were confirmed by ²⁷Al NMR spectroscopy. The reaction products were analyzed qualitatively by GC/MS. The reactivities of activated aluminum and anhydrous aluminum chloride toward tert-butyl chloride under the same conditions were compared. A distinctive feature of the interaction activated aluminum and tert-butyl chloride is the dominant formation of the AlCl₄⁻ ion. By contrast, the interaction between aluminum chloride and tert-butyl chloride yields the polynuclear ion Al₂Cl₇⁻ and, likely, Al₃Cl₁₀⁻.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Structure and properties of H<Subscript>8</Subscript>(PW<Subscript>11</Subscript>TiO<Subscript>39</Subscript>)<Subscript>2</Subscript>O heteropoly acid

Heteropoly acid (HPA) H₈(PW₁₁TiO₃₉)₂O·xH₂O (I) is synthesized by three different ways and studied by chemical analysis, potentiometric titration, mass-spectrometry, IR, ³¹P, ¹⁸³W, and ¹⁷O NMR spectroscopy, thermogravimetry, and transmission electron microscopy. Anion I consists of two subparticles of the Keggin structure bridged by Ti-O-Ti. The dimeric anion exists in HPA aqueous solutions at [I] > 0.02 M. At pH > 0.6 it splits to a [PW₁₁TiO₄₀]⁵⁻ monomer stable up to pH ∼ 6. When heated (150–400)°C, I splits into H₃PW₁₂O₄₀ and, apparently, H₃PW₁₀Ti₂O₃₈ without phase separation. Thermolysis products are soluble and when dissolved in water turn again into I. Complete decomposition of I to oxides occurs at ∼450°C.     

Dinuclear Zn<Superscript>2+</Superscript> metal complexes based on 1,10-phenanthroline derivates as catalysts for the hydrolysis of 2-hydroxypropyl-<Emphasis Type="Italic">p</Emphasis>-nitrophenyl phosphate (HPNP) and <Emphasis Type="Italic">p</Emphasis>-nitrophenyl phosphate (NPP)

One multidentate ligand, 1,13-di-(1,10-phenanthroline-2-methylene)-1,4,7,10,13-pentaazatridecane(L), has been synthesized and characterized. The kinetics of hydrolysis of 2-hydroxypropyl-p-nitrophenyl phosphate (HPNP) and p-nitrophenyl phosphate (NPP) catalyzed by complexes of L with Zn²⁺ have been studied. Both Zn₂L and Zn₂LH₋₁ had the ability to catalysis a hydrolysis of HPNP and NPP, and the kinetics of hydrolysis of HPNP and NPP were examined in aqueous solution at 25.0 ± 0.1 °C, I = 0.1 mol dm⁻³ KNO₃ at the pH range of 7.0–8.5, respectively. Kinetic studies showed that Zn₂LH₋₁ was a more active species than Zn₂L in the hydrolysis of HPNP and NPP. A new mechanism was proposed for the hydrolysis of HPNP and NPP catalyzed by Zn₂L and Zn₂LH₋₁.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.