三芳胺合成的研究进展

三芳胺化合物的合成方法主要有3种:(1)非金属催化的胺化反应;(2)铜催化的Ullnann反应,包括使用过量铜粉为催化剂的传统的Ullmann反应、使用相转移催化剂的Ullmann反应以及使用配体的post-Ullmann反应;(3)钯催化的Buchwald-Hartwig反应.该类反应活性的关键是配体的选择,根据配体结构的不同可分为双膦螯合型配体、单膦配体和非膦配体.对该类化合物的这几种合成方法的研究进展进行了总结.     

Studies on activation of C-H bond and insertion reaction of CO,CO2 into M-C bond using (Ir(COD)(diphos))Cl complexes

Three new organoiridium complexes are prepared from (Ir(COD)(μ-Cl))₂ and diphosphine in 1:2 molar ratio, and characterized by means of IR, ¹H NMR electric conductivity and elemental analysis. Using acetonitrile as substrate. we investigated the abilities of these complexes to activate sp³ C-H bond and promote insertion reaction of CO, CO₂ into metal-carbon bond. The experimental results show that the activity of (Tr(COD)(diphos))Cl is correlated to the electronic property of diphosphine chelate ligand.     

Water-soluble Mo3S4 clusters bearing hydroxypropyl diphosphine ligands: synthesis, crystal structure, aqueous speciation, and kinetics of substitution reactions

The [Mo(3)S(4)Cl(3)(dhprpe)(3)](+) (1(+)) cluster cation has been prepared by reaction between Mo(3)S(4)Cl(4)(PPh(3))(3) (solvent)(2) and the water-soluble 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe, L) ligand. The crystal structure of [1](2)[Mo(6)Cl(14)] has been determined by X-ray diffraction methods and shows the typical incomplete cuboidal structure with a capping and three bridging sulfides. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of the diphosphine ligand. Depending on the pH, the hydroxo group of the functionalized diphosphine can substitute the chloride ligands and coordinate to the cluster core to give new clusters with tridentate deprotonated dhprpe ligands of formula [Mo(3)S(4)(dhprpe-H)(3)](+) (2(+)). A detailed study based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of acid-base equilibria and the kinetics of interconversion between the 1(+) and the 2(+) forms. Both conversion of 1(+) to 2(+) and its reverse process occur in a single kinetic step, so that reactions proceed at the three metal centers with statistically controlled kinetics. The values of the rate constants under different conditions are used to discuss on the mechanisms of opening and closing of the chelate rings with coordination or dissociation of chloride.     

PRELIMINARY STUDIES ON THE SYNTHESIS AND CHARACTERIZATION OF OXY-AND THIO-DIACETIC ACID HYDRAZITION AND THEIR FIRST-ROW TRANSITION METAL COMPLEXES

It has been made certain that thio-and oxy-diacetic acid hydrazidesare potential anticancer compounds.However,their ability to formcomplexes with transition metals and the properties of the complexes thusformed have not been studied.Employing a new potential anticancer ligand1,2-bis(thioacetic acid hydrazide)ethane prepared in our lab,along withligands oxydiacetic hydrazide and 1,2-bis(oxyacetic acid hydrazide)ethane,a series of 11 new first-row transition metal(M=Zn~(2+),Cu~(2+),Co~(2+),Ni~(2+))complexes with each of the above three ligands have been synthesizedand characterized by means of elemental analyses,IR,TG and X-raypowder diffraction.     

Frustrated Lewis Pair Chemistry Enables N2 Borylation by Formal 1,3-Addition of a B−H Bond in the Coordination Sphere of Tungsten

The first example of a formal 1,3-B−H bond addition across the M−N≡N unit of an end-on dinitrogen complex has been achieved. The use of Piers’ borane HB(C₆F₅)₂ was essential to observe this reactivity and it plays a triple role in this transformation: 1) electrophilic N₂-borylation agent, 2) Lewis acid in a frustrated Lewis pair-type B−H bond activation, and 3) hydride shuttle to the metal center. This chemistry is supported by NMR spectroscopy and solid-state characterization of products and intermediates. The combination of chelate effect and strong σ donation in the diphosphine ligand 1,2-bis(diethylphosphino)ethane was mandatory to avoid phosphine dissociation that otherwise led to complexes where borylation of N₂ occurred without hydride transfer.     

Gold(I) chloride adducts of 1,3-bis(di-2-pyridylphosphino)propane: synthesis, structural studies and antitumour activity

The novel water soluble bidentate phosphine ligand 1,3-bis(di-2-pyridylphosphino)propane (d2pypp) has been synthesized by a convenient route involving treatment of 2-pyridyllithium with Cl(2)P(CH(2))(3)PCl(2) and isolation in crystalline form as the hydrochloride salt. The synthesis of the precursor Cl(2)P(CH(2))(3)PCl(2) has been optimized by the use of triphosgene as the chlorinating agent. The 2 : 1 and 1 : 2 AuCl : d2pypp adducts have been synthesized and characterized by NMR spectroscopy and single crystal X-ray studies, and shown to be of the form (AuCl)(2)(mu-d2pypp-P,P') and [Au(d2pypp-P,P')(2)]Cl(.3.75H(2)O), respectively. The latter is more lipophilic than analogous 1 : 2 adducts of gold(I) chloride with the diphosphine ligands 1,2-bis(di-n-pyridylphosphino)ethane (dnpype) for n = 2, 3 and 4, based on measurement of the n-octanol-water partition coefficient (log P = -0.46). A single crystal structure determination of the 1 : 2 Au(I) complex of the 3-pyridyl ethane ligand shows it to be of the form [Au(d3pype-P,P')(2)]Cl.5H(2)O. The in vitro cytotoxic activity of [Au(d2pypp)(2)]Cl was assessed in human normal and cancer breast cells and selective toxicity to the cancer cells found. The significance of these results to the antitumour properties of chelated 1 : 2 Au(I) diphosphine complexes is discussed.     

Tri- and pentanuclear tungsten-(mu-S)-M clusters (M = W, Cu, Ag)

The thiotungstate [Et4N]2[OW(WS4)2], [Et4N]2.1, containing the linear [[S2W(VI)(mu-S)2]2W(IV)=O] core, was prepared from [Et4N]2[WS4] in the presence of the sulfide scavenger Cd2+. Addition of 1,2-bis(o-diphenylphosphinophenyl)ethane (diphosphine) and Cu+ or Ag+ to solutions of 1 in MeCN/DMF led to coordination of the (diphosphine)Cu/Ag fragments to the terminal sulfido ligands of 1, yielding novel linear pentanuclear, heterometallic clusters [mu-[OW(IV)(DMF)(W(VI)S4)2][M(diphosphine)]2], 2 (M = Cu) and 3 (M = Ag). Along with 2, the trinuclear cluster [[mu-(W(VI)S4)[Cu(diphosphine)(2)]], 4, was also obtained. The molecular and crystal structures of [Et4N]2.1, 2.MeCN, 3.MeCN, and 4.2MeCN.CH2Cl2 have been determined.     

Spectroscopic characterization of molybdenum dinitrogen complexes containing a combination of di- and triphosphine coligands: 31P NMR analysis of five-spin systems

The three molybdenum-N2 complexes [Mo(N2)(dpepp)(depe)] (1), [Mo(N2)(dpepp)(dppe)] (2), and [Mo(N2)(dpepp)(1,2-dppp)] (3), all of which contain a combination of a bi- and a tridentate phosphine ligand, were prepared and investigated by vibrational and (31)P NMR spectroscopy. As a tridentate ligand bis(2-diphenylphosphinoethyl)phenylphosphine (dpepp) has been employed. The three different bidentate ligands are 1,2-bis(diethylphosphino)ethane (depe), 1,2-bis(diphenylphosphino)ethane (dppe), and R-(+)-1,2-bis(diphenylphosphino)propane (1,2-dppp). N-N as well as metal-N vibrations of 1-3 are identified and interpreted in terms of the geometric and electronic structures of the complexes. (31)P NMR spectra are recorded and fully analyzed. Moreover, correlation spectroscopy (COSY)-45 measurements are performed to determine the relative signs of coupling constants. Special attention is directed to a detection of different isomers and their (31)P NMR, as well as vibrational spectroscopic properties. The implications of the results for the area of synthetic nitrogen fixation with phosphine complexes are discussed.     

Conformational equilibria in 7-membered ring metal chelate complexes

Bis(diphosphine)metal and (diphosphine)(diene)metal (M = Rh, Ir) cationic complexes containing 7-membered chelate rings have been studied by low temperature ³¹P and ¹H NMR spectroscopy. For cyclooctadiene-1,4-bis(diphenylphosphino)butane- and -DIOP-rhodium, and cyclooctadiene-1,4-bis(diphenylphosphino)butane-iridium complexes, boat and chair conformations may be distinguished at low temperature. ¹H NMR spectra of these and analogous complexes suggest that both boat and chair conformers are significantly populated at room temperature. Bis(diphosphine) complexes of rhodium and iridium show very complex dynamic behaviour.     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with aryl Grignard reagents and their application to sequential radical cyclization/cross-coupling reactions

Reactions of alkyl halides with arylmagnesium bromides in the presence of cobalt(II)(diphosphine) complexes are discussed. Treatment of 1-bromooctane with phenylmagnesium bromide with the aid of a catalytic amount of CoCl₂(dppp) [DPPP=1,3-bis(diphenylphosphino)propane] yielded octylbenzene in good yield. The reaction mechanism would include single electron transfer from an electron-rich cobalt complex to alkyl halide to generate the corresponding alkyl radical. The mechanism was justified by CoCl₂(dppe)-catalyzed [DPPE=1,2-bis(diphenylphosphino)ethane] sequential radical cyclization/cross-coupling reactions of 6-halo-1-hexene derivatives that yielded benzyl-substituted cyclopentane skeletons.     

Copper(II) complexes of a series of polypyridine ligands possessing a 1,2-bis(2-pyridyl)ethane common moiety: incorporation and hydrolysis of phosphate esters

Two tetradentate ligands 1,2-bis[2-((dimethylamino)methyl)-6-pyridyl]ethane (L1) and 1,2-bis[2-(N-piperidinomethyl)-6-pyridyl]ethane (L2) and a hexadentate ligand 1,2-bis(2-((methyl(pyridylmethyl)amino)methyl)-6-pyridyl)ethane (L3) were prepared as part of a series of new polypyridine ligands possessing a 1,2-bis(2-pyridyl)ethane common moiety. L1 and L2 form mononuclear Cu(II) complexes [Cu(L)(Cl)](ClO4) [L = L1 (1) and L2 (2)], respectively. L3 forms a dinuclear Cu(II) complex [Cu2(L3)((PhO)2PO2)2](ClO4)2 (3) or a hexanuclear Cu(II) complex [Cu6(L3)3((PhO)PO3)4](ClO4)4 (4) in the presence of (PhO)2PO2- monoanion or (PhO)PO3(2-) dianion, respectively. The structures of 1-4 were determined by X-ray analysis. The structures in solution were investigated by means of FAB and CSI MS spectrometers. The structural flexibility of the common 1,2-bis(2-pyridyl)ethane moiety and of the pendant groups allows complexes 1-4 to adapt to the various structures. Each Cu ion in 1 and 2 adopts a square pyramidal geometry with one Cl ion and two pendant groups (L1 and L2) binding in a bis-bidentate chelate mode. There is no steric repulsion between the pendant groups, so that the ligands specifically stabilize the mononuclear structures. L3 binds two Cu(II) ions with two pendant groups in tridentate chelate modes and, with the incorporation of phosphate esters, various dinuclear units are formed in 3 and 4. In 4, a dinuclear unit of [Cu2(L3)]4+ links two dinuclear units of [Cu2(L3)(PhOPO3)2] with four (mu3)-1,3-PhOPO3(2-) bridges. The hydrolytic activity of 2 and a dicopper(II) complex of L3 was examined with tris(p-nitrophenyl) phosphate (TNP) as a substrate.     

Synthesis, luminescence and ion-binding properties of palladium(II) complexes with 1,2-bis[di(benzo-15-crown-5)phosphino]ethane (dbcpe)

A series of palladium(II) complexes with 1,2-bis[di(benzo-15-crown-5)phosphino]ethane ligand (dbcpe), [Pd(dbcpe)X2] (X = Cl 1, Br 2 and I 3), have been successfully synthesised and characterised. The X-ray crystal structure of dbcpe has also been determined. The cation-binding properties of the complexes have been studied and the stability constants with alkali metal cations determined. The crown-free analogue of dbcpe, 1,2-bis[bis(3,4-dimethoxyphenyl)phosphino]ethane (ddmppe), and the related complexes have also been prepared and comparison studies have been made.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

Synthesis and spectral studies of new Co(II), Cu(II), and Ni(II) metal complexes with aromatic diamine

1,2-bis(p-aminophenoxy)ethane was obtained with reduction of 1,2-bis(p-nitrophenoxy)ethane and Pd/C as catalyst in hydrazine hydrate. Co(II), Cu(II), and Ni(II) complexes of aromatic bidentate diamine were prepared. The structure of the ligand and its complexes were characterized by IR, elemental analysis, magnetic susceptibility, conductivimetry, UV-Vis and ¹H NMR spectroscopy. The metal/ligand mole ratios were found to be 1:1. The general compositions of these complexes are found to be [CoLCl₂], [CuLCl₂], and [CoLCl₂]. The text was submitted by the authors in English.     

Synthesis, molecular structures, and chemistry of some new palladium(II) and platinum(II) complexes with pentafluorophenyl ligands

A series of palladium(II) and platinum(II) complexes possessing pentafluorophenyl ligands of the general formula [M(L-L)(C6F5)Cl][space](M = Pd 3; L-L=tmeda (N,N,N',N',-tetramethylethylenediamine) a; 1,2-bis(2,6-dimethylphenylimino)ethane) b; dmpe (1,2-bis(dimethylphosphino)ethane) c; dcpe (1,2-bis(dicyclohexylphosphino)ethane) d; Pt ; L-L=tmeda a; 1,2-bis[3,5-bis(trifluoromethyl)phenylimino]-1,2-dimethylethane b; dmpe c; dcpe d) were readily synthesized from the dimer [M(C6F5)(tht)(mu-Cl)2] (M=Pd 1b, Pt 2b; tht=tetrahydrothiophene) and the corresponding bidentate ligand. In the case of palladium, the corresponding iodo analogues (6a-c) were readily synthesized in a one-pot reaction from [Pd2(dba)3], iodopentafluorobenzene, and the appropriate ligand. The platinum complexes 4c-d were then converted to the water complexes [Pt(L-L)(C6F5)(OH2)]OTf (L-L =dmpe 7a; dcpe 7b)via reaction with AgOTf in the presence of water. Attempts to convert the palladium complexes 3c-d to the corresponding water complexes resulted in the disproportionation of the intermediate water complex to form [Pd(L-L)(C6F5)2] (L-L=dmpe 8) or [Pd(L-L)2][OTf]2(L-L=dcpe 9). Upon standing in solution for prolonged periods, complex 7a undergoes an identical disproportionation reaction to the Pd analogues to form [Pt(L-L)(C6F5)2] (L-L=dmpe 10). Complexes 4c and 4d were converted to the corresponding hydrides (11b-c, respectively) using two different hydride sources: 11a was formed by the reaction of with NaBH4 in refluxing THF, while 11b was synthesized in near quantitative yield using [Cp2ZrH2] in refluxing THF. Attempts to synthesize eta2-tetrafluorobenzyne complexes [Pt(L-L)(C6F4)] (L-L=dmpe, dcpe) from reaction of 11a-b with butyllithium were unsuccessful. The molecular structures of 3a,4a, 4c, 4d, 6b, 7a, 8, 11b and have been determined by X-ray crystallographic studies, and are discussed.     

Cobalt-catalyzed trimethylsilylmethylmagnesium-promoted radical alkenylation of alkyl halides: a complement to the Heck reaction

A cobalt complex, [CoCl2(dpph)] (DPPH = [1,6-bis(diphenylphosphino)hexane]), catalyzes an intermolecular styrylation reaction of alkyl halides in the presence of Me3SiCH2MgCl in ether to yield beta-alkylstyrenes. A variety of alkyl halides including alkyl chlorides can participate in the styrylation. A radical mechanism is strongly suggested for the styrylation reaction. The sequential isomerization/styrylation reactions of cyclopropylmethyl bromide and 6-bromo-1-hexene provide evidence of the radical mechanism. Crystallographic and spectroscopic investigations on cobalt complexes reveal that the reaction would begin with single electron transfer from an electron-rich (diphosphine)bis(trimethylsilylmethyl)cobalt(II) complex followed by reductive elimination to yield 1,2-bis(trimethylsilyl)ethane and a (diphosphine)cobalt(I) complex. The combination of [CoCl2(dppb)] (DPPB = [1,4-bis(diphenylphosphino)butane]) catalyst and Me3SiCH2MgCl induces intramolecular Heck-type cyclization reactions of 6-halo-1-hexenes via a radical process. On the other hand, the intramolecular cyclization of the prenyl ether of 2-iodophenol would proceed in a fashion similar to the conventional palladium-catalyzed transformation. The nonradical oxidative addition of carbon(sp2)-halogen bonds to cobalt is separately verified by a cobalt-catalyzed cross-coupling reaction of alkenyl halides with Me3SiCH2MgCl with retention of configuration of the starting vinyl halides. The cobalt-catalyzed intermolecular radical styrylation reaction of alkyl halides is applied to stereoselective variants. Styrylations of 1-alkoxy-2-bromocyclopentane derivatives provide trans-1-alkoxy-2-styrylcyclopentane skeletons, one of which is optically pure.     

Exploring stereogenic phosphorus: synthetic strategies for diphosphines containing bulky,highly symmetric substituents

Diphosphine ligands bearing highly symmetric, bulky substituents at a stereogenic P atom were prepared, exploiting established protocols, which include the use of chiral synthons such as 3,4-dimethyl-2,5-diphenyl-1,3,2-oxazaphospholidine-2-borane (3a) and phenylmethylchlorophosphine borane (10) and the enantioselective deprotonation of dimethylarylphosphine boranes. However, only (Bu(t)())(Me)PCH(2)CH(2)P(Bu(t)Me (8a) could be prepared from 3a. The diphosphines (S,S)-1,2-bis(mesitylmethylphosphino)ethane, ((S,S)-8b) and (S,S)-1,2-bis(9-anthrylmethylphosphino)ethane ((S,S)-8c), which contain 2,6-disubstituted aryl P-substituents, were prepared by Evans' sparteine-assisted enantioselective deprotonation of P(Ar)(Me)(2)(BH(3)) (Ar = mesityl or 9-anthryl), but the enantioselectivity did not exceed 37% ee. The asymmetrically substituted, methylene-bridged diphosphine (2R,4R)-(Ph)(CH(3))PCH(2)P(Mes)(CH(3)) ((2R,4R)-12) (Mes = mesityl) was prepared by the newly developed stereospecific reaction of the enantiomerically pure chlorophosphine borane PCl(Ph)(Me)(BH(3)) (10) with the racemic, monolithiated dimethylmesitylphosphine borane P(Mes)(Me)(CH(2)Li)(BH(3)). Diastereomerically pure (2R,4R)-12 was obtained with 86% ee. The rhodium(I) derivatives [Rh(COD)(P-P)]BF(4) containing the diphosphine ligands 8a, 8b, and 12, as well as the previously reported (S,S)-1,2-bis(1-naphthylphenylphosphino)ethane ((S,S)-8d), were prepared and tested in the enantioselective catalytic hydrogenation of acetamidocinnamates. The best catalytic result (98.6% ee) was obtained with [Rh(COD)(8d)](+) as catalyst and methyl Z-alpha-acetamidocinnamate as substrate. Some of the catalytic results are discussed in terms of the preferred conformations of the substituents at phosphorus, as calculated by molecular modeling.     

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane as convenient chiral ligand precursors

Dihydroboronium derivatives of (S,S)-1,2-bis(t-butylmethylphosphino)ethane (t-Bu-BisP*) were prepared and used as chiral diphosphine ligand precursors in Rh-catalyzed asymmetric hydrogenation of methyl (Z)-acetamidocinnamate to afford the hydrogenation product in up to 94% enantioselectivity.     

Using ligand bite angles to control the hydricity of palladium diphosphine complexes

A series of [Pd(diphosphine)(2)](BF(4))(2) and Pd(diphosphine)(2) complexes have been prepared for which the natural bite angle of the diphosphine ligand varies from 78 degrees to 111 degrees. Structural studies have been completed for 7 of the 10 new complexes described. These structural studies indicate that the dihedral angle between the two planes formed by the two phosphorus atoms of the diphosphine ligands and palladium increases by over 50 degrees as the natural bite angle increases for the [Pd(diphosphine)(2)](BF(4))(2) complexes. The dihedral angle for the Pd(diphosphine)(2) complexes varies less than 10 degrees for the same range of natural bite angles. Equilibrium reactions of the Pd(diphosphine)(2) complexes with protonated bases to form the corresponding [HPd(diphosphine)(2)](+) complexes were used to determine the pK(a) values of the corresponding hydrides. Cyclic voltammetry studies of the [Pd(diphosphine)(2)](BF(4))(2) complexes were used to determine the half-wave potentials of the Pd(II/I) and Pd(I/0) couples. Thermochemical cycles, half-wave potentials, and measured pK(a) values were used to determine both the homolytic ([HPd(diphosphine)(2)](+) --> [Pd(diphosphine)(2)](+) + H*) and the heterolytic ([HPd(diphosphine)(2)](+) --> [Pd(diphosphine)(2)](2+) + H(-)) bond-dissociation free energies, Delta G(H*)* and Delta G(H-)*, respectively. Linear free-energy relationships are observed between pK(a) and the Pd(I/0) couple and between Delta G(H-)* and the Pd(II/I) couple. The measured values for Delta G(H*)* were all 57 kcal/mol, whereas the values of Delta G(H-)* ranged from 43 kcal/mol for [HPd(depe)(2)](+) (where depe is bis(diethylphosphino)ethane) to 70 kcal/mol for [HPd(EtXantphos)(2)](+) (where EtXantphos is 9,9-dimethyl-4,5-bis(diethylphosphino)xanthene). It is estimated that the natural bite angle of the ligand contributes approximately 20 kcal/mol to the observed difference of 27 kcal/mol for Delta G(H-)*.     

A novel approach toward asymmetric synthesis of alcohol functionalized C-chiral diphosphines via two-stage hydrophosphination of terminal alkynols

Alcohol functionalized diphosphine ligands with chirality residing on the carbon backbone were prepared using a novel two-stage asymmetric synthetic methodology from the corresponding terminal alkynols. Under mild conditions, the alkynols, 3-butyn-1-ol and 2-propyn-1-ol, were subjected to direct hydrophosphination to give the corresponding Markovnikov addition products. The phosphine functionalized alkenols thus obtained were subsequently subjected to a second-stage asymmetric hydrophosphination employing an organopalladium complex containing the ortho-metalated (R)-(1-(dimethylamino)ethyl)naphthalene as a chiral auxiliary and reaction promoter. In the reaction that involved 3-diphenylphosphanyl-but-3-en-1-ol, all four possible stereoisomeric products were generated stereoselectively in the ratio of 1:2:4:18. The major isomer was subsequently isolated in appreciable yield in its configurationally pure form and characterized by means of single-crystal X-ray crystallography. The naphthylamine auxiliary could be removed chemoselectively from the template product by treatment with concentrated hydrochloric acid to form the corresponding optically pure neutral complex. Subsequent ligand displacement from the palladium achieved using aqueous potassium cyanide generated the optically pure diphosphine ligand with chirality residing on the carbon backbone in appreciable yield. However, the similar asymmetric hydrophosphination reaction involving 2-diphenylphosphanyl-prop-2-en-1-ol did not exhibit appreciable selectivity.