The ionic product of water in highly concentrated aqueous electrolyte solutions

Summary The ionic product of water, , has been determined in aqueous NaCl (0.5–5.0M), KCl (3.0M), NaNO₃ (3.0 and 5.0M), and KNO₃ (2.5M) at 25 °C from high-precision potentiometric titrations carried out in cells with liquid junction using either glass or hydrogen electrodes. Measurements ofK _w provide a set of self-consistent data that can be used in the estimation of activity coefficient changes and liquid junction potentials in the study of extremely concentrated electrolyte solutions. Where comparison is possible, results obtained by hydrogen electrode measurements are in excellent agreement (ca ± 0.005 inpK _w) with other reliable experimental values and the predictions of thePitzer activity-coefficient model. The glass electrode results are, as expected, routinely lower (by 0.03–0.05pK _w units), owing to interference by Na⁺ ions. This effect virtually disappears in solutions of potassium salts. Comparison of the experimental results with thePitzer predictions shows that knowledge of the ternary interaction parameters is essential to account for specific ionic effects in the concentration dependence ofpK _w.On leave from the Abteilung für Physikalische Chemie und Theoretische Hüttenkunde, Montanuniversität Leoben, A-8700 Leoben, Austria     

An alternative interpretation of the chemical shift of the water proton in aqueous tetraalkylammonium halide solutions at various temperatures

An alternative explanation of the behavior of proton magnetic resonance chemical shifts of the water proton in aqueous tetraalkylammonium salt solutions is presented. It involves independent ion-solvent interactions and rapid exchange on the NMR time scale with the bulk water. Our explanation fits the known data and clearly shows why the observed chemical shift is linear with molality at low concentrations.     

Aluminum speciation and thermal evolution of aluminas resulting from modified Yoldas sols

Aluminas resulting from sols prepared via a modified Yoldas procedure were studied with differential thermal analysis (DTA), differential thermal gravimetrie (DTG), ²⁷Al nuclear magnetic resonance (²⁷Al MAS NMR) and X-ray diffraction (XRD) concerning their thermal properties, aluminum speciation and phase content.Hydrolysis of aluminum-sec-butoxide in aluminum nitrate solutions allowed to prepare stable sols with varying molar ratios, solids contents and pH values. Resulting sols contained different aluminum species including also Al₁₃ polycations. Sol preparation conditions also determined aluminum speciation in solid products obtained after thermal treatments of gels obtained from these sols. Al₁₃ polycations and AlO₅ species were found to play an important role for thermally induced transformation from amorphous products via eta-Al₂O₃ to alpha-Al₂O₃. Intermediately formed eta-Al₂O₃ promotes the phase transformation to alpha-Al₂O₃.     

Amino-substitutedgem-diphosphonic acids: Dissociation mechanism and the structure of species in aqueous solutions

The mechanism of dissociation of amino-substitutedgem-diphosphonic acids R₂N(CH₂) _n CR'(PO₃H₂)₂ with different lengths of the alkylidene chain and different substituents at the N atom was studied by vibrational (IR, Raman) and NMR (¹H,¹⁴N,³¹P) spectroscopy using data of conformational analysis (molecular mechanical) data. The important role of intramolecular H-bonds and cyclic solvates for the stabilization of various conformations and tautomeric forms of ions was demonstrated. The spectral data that allow one to consider thegem-diphosphonate group as a single acidic center were found. Translated fromIzvestiya Akademii Nauk Seriya Khimicheskaya, No. 6, pp. 1051–1064, June, 2000.     

Interaction of L-3,4-dihydroxyphenylalanin (L-DOPA) as a coordinating ligand with a series of metal ions; reaction of L-DOPA

L-DOPA is an important neurotransmitter that is found in the brain and as a hormone in the circulatory system. We report in this article the similarities and differences in behaviour of this important neurotransmitter as a chelating agent among some divalent and trivalent metal ions using potentiometric titration in aqueous solutions at 25.0?±?1.0°C. The careful and detailed potentiometric titrations of L-DOPA with Al³⁺, Cr³⁺, Fe³⁺, Cu²⁺, and Zn²⁺ are discussed and compared. UV-Vis-spectroscopy is utilized for both the free L-DOPA and for the Fe³⁺/L-DOPA system. The characteristic peak due to the π?→?π* transition of the free L-DOPA at ～280?nm (ε_280?nm?=?1927?±?65?M^?1?cm^?1 between pH values of 2.0 to 3.0) disappeared when the iron solution was added to the L-DOPA sample in the same pH range. For the Fe³⁺/L-DOPA system we have observed a new peak at 470?nm with ε₄₇₀?=?800?±?50?M^?1?cm^?1. These comparison studies of the similarities and differences among these di- and tri-valent metal ions shed light on these systems in aqueous solutions. The appropriate metal simulation and speciation diagrams were constructed using the model that fit the titration data points.     

Evidences of a hydrolysis process in the synthesis of N-vinylcaprolactam-based microgels

The hydrolysis process suffered by vinylcaprolactam (VCL) monomer during polymerization and the way of avoiding it is a matter of considerable interest when the final material is used in biomedical applications. In this work, in order to study the hydrolysis process in the synthesis of VCL-based microgels, VCL was polymerized by emulsion polymerization in batch and semi-batch reactors by using N,N′-methylenebisacrylamide (BA) as cross-linker and potassium persulfate (KPS) as initiator. Moreover, the partial conversion evolutions of VCL and BA were analyzed by ¹H NMR. The colloidal characterization was carried out by measuring the final average diameters as a function of temperature. The results showed that there were two competitive reactions (hydrolysis and propagation) in the polymerizations carried out in the absence of a buffer. However, VCL did not suffer hydrolysis by adding a buffer in the recipes. A new reliable method for the determination of the partial conversions was developed using the quantitative NMR method. The final cross-linked colloidal particles (microgel particles) obtained in the buffered reaction presented the conventional swelling de-swelling behavior corresponding to temperature sensitive microgels.     

柠檬酸铝溶液中铝的形态研究

采用27Al NMR法、渗析法与原子吸收分光光度法,研究了柠檬酸铝(AlCit)溶液中铝的形态及pH值的影响.结果表明,在AlCit溶液中存在两种形态的Al,一种是分子态AlCit,另一种是胶态Al, pH值增加时,分子态AlCit的量减少而胶态Al的量增加.     

The fractionation and determination procedures for the speciation of Pb and Po in soil samples

A method for speciation and determination of ²¹⁰Pb and ²¹⁰Po in soil samples was developed. The speciation was carried out by fractionating the soil samples into five fractions which are water soluble or exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and bound to residue. After mineralisation, 10% solution of each fraction was used to spontaneously deposit polonium on a silver disk at 85-90 °C and pH 1.5, and ²¹⁰Po was measured by α-spectrometry; the remain solution was used to separate lead by anion-exchange resin and purified by precipitation as PbS and PbSO₄, and ²¹⁰Pb was determined by a low background β-counter. The IAEA-327 reference material (soil) was studied for ²¹⁰Pb and ²¹⁰Po speciation. The results show that: (1) the average yields are 88.7 ± 6.4% for ²¹⁰Pb and 93.8 ± 8.2% for ²¹⁰Po; (2) if compared to the total ²¹⁰Pb activity in the sample, ²¹⁰Pb fractions are 0.95% in exchangeable form, 10.6% bound to carbonates, 14.3% bound to Fe-Mn oxides, 7.0% bound to organic matter and 67.2% bound to residue or acid soluble, and the corresponding values for ²¹⁰Po are 0.17%, 0.97%, 21.0%, 0.47% and 77.4%, respectively; and (3) the obtained ²¹⁰Pb concentration is in good agreement with the recommended value given by the IAEA.     

Experimental determination of rotational motion correlation times of choline iodide in aqueous solutions

The influence of complexation on the molecular reorientation of choline iodide in dilute aqueous solutions was determined using the multiplet relaxation effect of ¹³C nuclei. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1111–1114, May, 2005.     

H NMR and IR study of temperature-induced phase transition of negatively charged poly(N-isopropylmethacrylamide-co-sodium methacrylate) copolymers in aqueous solutions

¹H NMR and IR spectroscopies were used to investigate the temperature-induced phase transition behaviour of poly(N-isopropylmethacrylamide-co-sodium methacrylate) [P(IPMAAm/MNa)] copolymers, containing in aqueous solutions negatively charged MNa units (i = 1-10 mol%), and the obtained results were compared with those obtained for poly(N-isopropylmethacrylamide) (PIPMAAm) homopolymer. For PIPMAAm/H₂O solution, IR spectra indicate that the transition temperatures for the hydrophilic CO groups are slightly higher (by ∼ 2 K) in comparison with hydrophobic CH₃ groups. The decreasing values of phase-separated fraction p_max and the decrescent hysteresis during gradual heating and cooling, both with increasing content of MNa units i in the copolymer, show that for copolymers with i ? 5 mol% the globular-like structures formed at temperatures above the respective LCST are rather porous and disordered with relatively low degree of polymer-polymer hydrogen bonding. While for P(IPMAAm/MNa) copolymers with i ? 5 mol% most water molecules are expelled from globular structures, for i < 5 mol% a certain portion of water (HDO) molecules is rather tightly bound in globular structures; at the same time no releasing process was detected for the bound water even for 90 h.     

Diffusion of Li+ ions in concentrated solutions of LiNO3 in 1,3-diaminopropane

The temperature and composition dependences of the self-diffusion coefficient of Li⁺ ions were investigated for concentrated solutions of LiNO₃ in 1,3-diaminopropane by means of the NMR spin-echo technique from 20 to 50°C. The composition dependence of the activation energy shows a bend around 30 mol % LiNO₃. This is consistent with the previous results obtained from the electrical conductivity and the correlation time of the rotational motion of the solvating ions, and suggests that solvent molecules may act as bridges between Li⁺ ions at higher concentrations of LiNO₃.     

Interactions of La(III) with anions in aqueous solutions. A139La NMR study

The interactions of the La(III) cations with three anions (X), nitrate, chloride and perchlorate, in aqueous solutions in the pH range 4.0–6.5, were studied by¹³⁹La NMR spectroscopy. A single model, involving the formation of the contact ion-pair (inner-sphere complex) (LaX)²⁺ was successfully and quantitatively applied to the chemical shift and the transverse relaxation rate data. Both measurements gave values for the thermodynamic equilibrium constants of formation of (LaX)²⁺ (K _th ) in good agreement (average K _th =0.45±0.05; 0.15±0.09; 0.03±0.01, respectively for nitrate, chloride and perchlorate). The complexes are characterized by chemical shifts of –25, 22 and –3.1 ppm and by transverse relaxation rates of 11.2, 5 and 1.65 kHz respectively for nitrate, chloride and perchlorate. The¹³⁹La quadrupolar relaxation rate is not controlled by the reorientational correlation time. This finding is discussed, and it is suggested that the very fast exchange of water molecules in the first coordination sphere of La(III) is responsible for the time fluctuation of the electric field gradient at the¹³⁹La nucleus site.     

Lithium Ion Association with Sodium Phytate and the Effects on the Conformational Equilibria. Implications in the Physiological Effects of Lithium

Abstract

³¹P NMR was employed to examine the solution interactions of lithium and potassium ions with sodium phytate. The phytate molecular conformation was found to be pH and concentration dependent. The conformational equilibria of sodium phytate in aqueous solution was not affected by the addition of potassium ions, however, it was influenced by added lithium ions and was dependent on lithium ion concentration. Furthesmore, the phytate molecule showed some selectivity for lithium ion association over potassium and sodium ions. Possible implications in the physiological effects of lithium are discussed.     

Nuclear magnetic resonance of donor atoms as a tool for determination of the structure of platinum metal complexes in solutions

Data on the NMR spectroscopy of C, N, O, Si, P, and Sn donor atoms of platinum metal complexes in solutions are surveyed. The chemical shift of a donor atom mainly depends on the ligand in the trans-position (due to the trans-effect). The chemical shift of a donor atom on a particular coordinate of the complex (coordinate shift, CSh) is an attribute of this coordinate and can be used to identify such a coordinate in platinum metal complexes and to determine the structures of complexes. Based on the known data, CSh diagrams were composed for ¹H, ¹³C, ¹⁴N, ¹⁷O, ¹⁹F, ³¹P, and ¹¹⁹Sn. Examples of using the CShs for determining the structures of platinum metal complexes in solutions are presented.     

Rapid determination of Cs and precise Cs/Cs atomic ratio in environmental samples by single-column chromatography coupled to triple-quadrupole inductively coupled plasma-mass spectrometry

For source identification, measurement of ¹³⁵Cs/¹³⁷Cs atomic ratio not only provides information apart from the detection of ¹³⁴Cs and ¹³⁷Cs, but it can also overcome the application limit that measurement of the ¹³⁴Cs/¹³⁷Cs ratio has due to the short half-life of ¹³⁴Cs (2.06 y). With the recent advancement of ICP-MS, it is necessary to improve the corresponding separation method for rapid and precise ¹³⁵Cs/¹³⁷Cs atomic ratio analysis. A novel separation and purification technique was developed for the new generation of triple-quadrupole inductively coupled plasma-mass spectrometry (ICP-MS/MS). The simple chemical separation, incorporating ammonium molybdophosphate selective adsorption of Cs and subsequent single cation-exchange chromatography, removes the majority of isobaric and polyatomic interference elements. Subsequently, the ICP-MS/MS removes residual interference elements and eliminates the peak tailing effect of stable ¹³³Cs, at m/z 134, 135, and 137. The developed analytical method was successfully applied to measure ¹³⁵Cs/¹³⁷Cs atomic ratios and ¹³⁵Cs activities in environmental samples (soil and sediment) for radiocesium source identification.     

Detection and quantification of phenolic compounds in olive oil by high resolution H nuclear magnetic resonance spectroscopy

High resolution ¹H NMR spectroscopy has been employed as a versatile and rapid method to analyze the polar fraction of extra virgin olive oils containing various classes of phenolic compounds. The strategy for identification of phenolic compounds is based on the NMR chemical shifts of a large number of model compounds assigned by using two-dimensional (2D) NMR spectroscopy. Furthermore, 2D NMR was applied to phenolic extracts in an attempt to discover additional phenolic compounds. The ¹H NMR methodology was successful in detecting simple phenols, such as p-coumaric acid, vanillic acid, homovanillyl alcohol, vanillin, free tyrosol, and free hydroxytyrosol, the flavonols apigenin and luteolin, the lignans (+) pinoresinol, (+) 1-acetoxypinoresinol and syringaresinol, two isomers of the aldehydic form of oleuropein and ligstroside, the dialdehydic form of oleuropein and ligstroside lacking a carboxymethyl group, and finally total hydroxytyrosol and total tyrosol reflecting the total amounts of free and esterified hydroxytyrol and tyrosol, respectively. The absolute amount of each phenolic constituent was determined in the polar fraction by using anhydrous 1,3,5-triazine as an internal standard.     

Amino-substituted gem-diphosphonic acids: structures of complexes with divalent metal cations in aqueous solutions

A comparative study of complexation of acids R₂N(CH₂)_nCR"(PO₃H₂)₂ (R = H or Me; R" = OH or H; n = 1 or 2) with the Ca²⁺, Mg²⁺, Zn²⁺, and Cu²⁺ cations in aqueous solutions was carried out by vibrational (IR and Raman) and electronic spectroscopy using the data of ESR spectroscopy and conformational analysis (molecular mechanics). The MOPCPO chelate ring is formed in all ML and MHL complexes. The involvement of the N atom in coordination was found only in the Cu²⁺ complexes and is determined by the structure of the ligand. The relationship between the stability constants and the structures of the complexes in aqueous solutions is analyzed.     

High-precision direct determination of the Sr/Sr isotope ratio of bottled Sr-rich natural mineral drinking water using multiple collector inductively coupled plasma mass spectrometry

We describe a precise and accurate method for the direct determination of the ⁸⁷Sr/⁸⁶Sr isotope ratio of bottled Sr-rich natural mineral drinking water using multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The method is validated by the comparative analysis of the same water with and without cation-exchange resin purification. The work indicates that isobarically interfering elements can be corrected for when ⁸⁷Rb/⁸⁶Sr < 0.05 (Rb/Sr < 0.015), and that the matrix elements (Ca, Mg, K and Na) have no significant effect on the accuracy of the Sr isotope data. The method is simple, rapid, eliminates sample preparation time, and avoids potential contamination during complicated sample-preparation procedures. Therefore, the high sample throughput inherent to the MC-ICP-MS can be fully exploited.     

Discrepancy in infrared measurement results of carbon monoxide in nitrogen mixtures due to variations of the 13C/12C isotope ratio

Significant errors in the non-dispersive infrared (NDIR) analyses of carbon monoxide (CO) can be made when the ¹³C/¹²C isotope ratio in the sample and the calibrant differ significantly. This paper shows that variations in the ¹³C/¹²C isotope ratio of 5×10⁻² mol/mol CO in nitrogen mixtures on three different NDIR CO analysers may lead to serious deviations in the instrument response, whereas the instrument response using GC-TCD is unaffected. The observed deviations in the assigned amount-of-substance fraction CO for a ¹³C depleted mixture vary from +2 to −5% relative to the gravimetric amount-of-substance fraction for different NDIR analysers. A GC-MS method has been developed to perform a pre-screening of the isotopic composition of CO in nitrogen mixtures. This method proved to be an adequate tool to measure differences in the ¹³C/¹²C ratio. Based on the GC-MS results a suitable measurement technique can be selected, or information about a possible error in NDIR analysis can be given to the producer or user of the calibration gas mixture. Presented at 3. International Gas Analysis Symposium, October 6–8, 2004, in Amsterdam     

Substitution clustering in a non-stoichiometric celsian synthesized by the thermal transformation of barium exchanged zeolite X

The thermal transformation of Ba exchanged zeolite X to celsian has been studied by ²⁷Al and ²⁹Si MAS NMR spectroscopy. Evidence for the degradation of the zeolite framework is present in the ²⁹Si NMR spectra after thermal treatment at 850 °C. Confirmation is provided by the ²⁹Si NMR data that synthesis of celsian via the decomposition of Ba exchanged zeolite leads to a single defect phase. Clustering of the isomorphous replacement of aluminium by silicon must occur to explain the observed ²⁹Si chemical shifts. The ²⁷Al NMR data show distorted aluminium co-ordination sites upon the thermal transformation of Ba exchanged zeolite X. The distortions present in the amorphous matrix are greater than those present in the monoclinic and hexagonal crystalline phases of celsian.