Effective adsorption of Hg(II) ions by new ethylene imine polymer/β-cyclodextrin crosslinked functionalized magnetic composite

A new effective magnetic composite material was prepared successfully for adsorption Hg(II) ions by introducing β-cyclodextrin/ethylene imine polymer to the mesoporous silica. The morphology and structure of EIP-β-CD magnetic adsorbents were characterized by FT-IR, XR, DTG, XPS and SEM technologies. The effect of many factors were discussed detailedly such as adsorption time, initial concentration, pH, different composition of adsorbent and adsorption temperature. It was found that EIP-β-CD showed excellent adsorption capacity, high selectivity, good reutilization and fast adsorption rate. The maximum adsorption capacity was 248.72 mg/g and the best removal rate was 99.49 % under the optimized experimental conditions. The kinetic and thermodynamic study showed typical characteristic of chemical adsorption, exothermic and spontaneous. The best mass proportion of β-cyclodextrin, ethylene imine polymer and glutaraldehyde was 1.0:0.4:0.2, and proper β-cyclodextrin can develop the adsorption capacity for Hg(II) ions in this adsorbent. The possible adsorption mechanism was investigated in detail. After the fifth cycle experiment, this new adsorbent still showed excellent adsorption capacity which indicated that it has great potential for Hg(II) ions cleanup in water solution.     

Photochemical molecular imprinting of cholesterol

Cinnamoylated photocrosslinkable cyclodextrin derivatives (BCC) were synthesized by the substitution of β-cyclodextrin (β-CD) with cinnamoyl chloride (CC) and crosslinked with either hexamethylenediisocyanate (HMDI) or toluenediisocyanate (TDI). Cyclodextrin rings were substituted with one or two cinnamoyl moieties, as found from mass spectrometry. The polymeric matrix with cholesterol molecular imprint was obtained on irradiation of molecular assembly formed by the cinnamoyl-functionalized β-cyclodextrin-cholesterol with light at 275 nm, absorbed exclusively by the cinnamoyl chromophores. Irradiation induced crosslinking due to the photodimerization of the cinnamoyl moieties. To determine the adsorption properties of the produced material imprinting was performed in the presence of tritiated cholesterol and the intensity of β radiation from the material was measured. The materials obtained by the adsorption of tritiated cholesterol by nonirradiated polymer were used as controls. It was found that the polymer photocrosslinked in the presence of cholesterol have shown a considerable higher adsorption capacity for cholesterol than the control materials. This confirmed successful formation of molecularly imprinted polymer (MIP) by photochemical crosslinking. The selectivity of imprinting was also confirmed using compounds of similar structures, i.e. ergosterol, dehydroergosterol, and Vitamin D.     

A novel β-cyclodextrin polymer modified by sulfonate groups

Based on the special properties and advantages of β-cyclodextrin (β-CD), β-CD polymers have been widely studied and used in recent years. A lot of researches have focused on the adsorption and separation properties of β-CD polymers. In this paper, β-CD polymer modified by sulfonate groups, which was named S-β-CDP, was prepared using epichlorohydrin as crosslinker and tiron (1,2-dihydroxybenzene-3,5-disulfonic acid disodium salt) as modifier. β-CD polymer without modification, which was named β-CDP, was also prepared for comparison. Infrared spectra, elemental analysis and adsorption tests of S-β-CDP were carried out and compared with β-CDP. The content of sulfonate groups in S-β-CDP was obtained from elemental analysis. The dramatically increased adsorption capability toward methylene blue and basic magenta confirmed the existence and chemical activity of sulfonate groups in S-β-CDP. Due to the convenient preparation process and modified adsorption properties, S-β-CDP will find its applications in various fields such as water purification, drug loading, separation and analysis.     

EDTA-β-CD交联聚合物的微波合成及其吸附性能

以β-环糊精(1)为原料,乙二胺四乙酸(2)为交联剂,聚乙二醇(PEG-400)为改性剂,磷酸二氢钠(MSP)为催化剂,采用微波法合成了一种双功能吸附剂——EDTA-β-CD交联聚合物(3),其结构经IR确证。通过单因素实验和响应曲面分析法优化了3的合成条件。结果表明:在最优反应条件(1 4.00 g,2 6.00 g,MSP 2.73 g,PEG-400 0.5 g,于90℃,80 W反应60 min)下,3产率70%。采用废水中亚甲基蓝(MB)和Cu2+的吸附实验研究了3的吸附性能。结果表明:3可同时吸附废水中的MB和Cu2+,吸附率分别为86.3%和96.2%。     

Water-insoluble cyclodextrin polymer crosslinked with citric acid for paraquat removal from water

The anionic water-insoluble cyclodextrin polymer (polyCTR-β-CD) was crosslinked between β-cyclodextrin (β-CD) and citric acid (CTR) at 180?°C during 30?minutes to eliminate paraquat (PQ) from water. The reaction yield was equal to 70.2%, the ionic exchange capacity corresponded to 3.29?mmol·g^?1 and the β-CD content was 0.29?mmol·g^?1. Then, samples were characterized by SEM, ATR-FTIR, TGA, BET and stereoscopic microscope. Adsorption experiments were investigated with different factors such as pH of the solution, contact time, initial concentration of paraquat and adsorption temperature. The relevant pH was equal to 6.5 and the optimal contact time was 120?minutes to attain adsorption equilibrium. At 30?°C, the adsorption capacity was increased (9.4, 17.4 and 20.8?mg·g^?1) when the initial concentration of paraquat was raised (25, 50 and 200?mg·L^?1 respectively). Adsorption kinetics was appropriated to the pseudo-second-order model and adsorption isotherm was fitted to the Langmuir model. For thermochemistry parameters at different temperatures, the negative ΔG° showed a spontaneous adsorption process, the negative ΔH° indicated an exothermic process and the positive ΔS° exhibited an increase disorder. Finally, the reusability of the insoluble polymer was reached 78.3% after four regeneration cycles in methanol.     

β-Cyclodextrin-based polyurethane (β-CDPU) polymers as solid media for adsorption and determination of Pb(II) ions in dust and water samples

In this work, β-CD-based polyurethane copolymers (β-CDPU) have been prepared by reacting β-CD with hexamethylene diisocyanate as cross-linked agent in dry DMF. This polymer showed high selectivity for preconcentration of Pb(II) at trace level prior to its flame atomic absorption spectrometric determination. The effect of several parameters such as pH, flow rate of sample, eluent kind and volume was investigated. The adsorption behaviors and mechanisms of Pb(II) on the samples were also studied. The maximum adsorption amount of Pb(II) was 8 mg g^?1 with the preconcentration factor of 250 for Pb(II). The Langmuir isotherm was proved to describe the adsorption data better than the Freundlich isotherm and a pseudo-first-order kinetic model fits the adsorption kinetic processes well. The calibration curve was linear in the range of (3–200 ng mL^?1) with a correlation coefficient of 0.9996. The limit of detection based on three times the standard deviation of the blank was 1.15 ng mL^?1. The relative standard deviations for the determination of 10 and 100 ng mL^?1 of Pb(II) were 3.60 and 0.43 % (n = 10), respectively. The method was successfully applied to the determination of lead in some environmental samples such as Tehran and Bushehr drinking water, river water and dust samples.     

Synergistic catalytic oxidation of cinnamaldehydes by poly(vinyl alcohol) functionalized β-cyclodextrin polymer in CaO2/HCO3− system

Poly (vinyl alcohol) (PVA)–functionalized β-cyclodextrin (β-CD) polymer crosslinked by citric acid (PVA-g-CD) was synthesized, characterized and evaluated for the catalytic oxidation of cinnamaldehydes. The polymer showed good activity and selectivity to aldehydes for some structurally diverse cinnamaldehydes. The enhanced catalytic activity may be attributed to the synergistic effect of the intermolecular weak interactions between β-CD and the functional group of PVA. In addition, calcium peroxide as a solid oxidant was found to significantly affect the reaction. This catalyst can be recovered and reused for five times without a significant loss in its activity and selectivity.     

橙皮苷印迹聚合物的识别性能及机理研究

为了制备对橙皮苷(HES)具有特定识别能力的吸附材料,以HES为模板分子,丙烯酰胺(AM)为功能单体,甲基丙烯酸乙二醇酯(EDMA)为交联剂,在甲醇中制备了HES印迹聚合物(MIP),采用平衡吸附实验方法研究了聚合物的吸附性能和选择性能,探讨了聚合物的印迹机理和识别机理.结果表明,MIP对HES具有较高的亲和性和选择性.当HES浓度为0.048 mmol/L时,MIP及相应NMIP对HES的分配系数KD分别为10.17 和2.973,印迹因子α达到3.421.MIP对结构相似物芦丁及柚皮苷的选择因子β分别为2.446和1.246.机理研究表明识别位点来自AM与HES苯甲酰系统的氢键作用,吸附溶液中水含量的增加对MIP的识别能力有较大的影响.最后,以高效液相色谱研究了MIP在样品中的分离富集能力,表明该印迹聚合物具有一定的应用潜能.     

Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media

The surface molecular imprinting technique has been proposed as a prospective strategy for template molecule recognition and separation by devising the recognition sites on the surface of imprinted materials. The purpose of this study was to establish a novel drug delivery system which was developed by surface molecular imprinting method using β-cyclodextrin (β-CD)-grafted chitosan (CS) (CS-g-β-CD) microspheres as matrix and sinomenine hydrochloride (SM) as the template molecule. By adjusting the amount of functional monomer and cross-linking agent, we got the more excellent adsorption of CS-g-β-CD molecularly imprinted polymers (MIPs-CS-g-β-CD). When the amount of functional monomer was 6 mmol and cross-linking agent was 20 mmol, the maximum binding capacity of MIPs and non-imprinted polymers (NIPs) was 55.9 mg/g and 37.2 mg/g, respectively. The results indicated that the recognition of SM with MIPs was superior to NIPs. The adsorption isotherms of MIPs-CS-g-β-CD indicated that the adsorption behavior fitted better to the Langmuir model, which showed that the adsorption process of polymer was monomolecular layer. In in vitro drug release studies, the accumulative release amount of MIPs-CS-g-β-CD was up to 78% within 24 h. MIPs exhibited an excellent controlled SM release profile without burst release and the mechanism of SM release was shown to conform to non-Fick diffusion. Therefore, MIPs-CS-g-β-CD were successfully applied to extraction of SM and used as the materials for drug delivery system.     

Water-insoluble β-cyclodextrin polymer crosslinked by citric acid: synthesis and adsorption properties toward phenol and methylene blue

Water-insoluble β-cyclodextrin polymer (β-CDP) crosslinked by citric acid was obtained with a yield of 65% through an environment friendly synthesis procedure. FT-IR spectra disclosed that the hydroxyl groups of β-CD had reacted and condensated with the carboxyl groups of citric acid, and at the same time the structural characteristics of β-CD were essentially maintained in β-CDP. The β-CDP exhibited notable adsorption capability toward phenol (q _max = 13.8 mg g^?1) and especially large adsorption capability toward methylene blue (q _max = 105 mg g^?1). The concentration of methylene blue in water could be reduced to 0.11 mg L^?1 by the β-CDP, indicating the excellent adsorption sensitivity of β-CDP toward methylene blue. The adsorption results disclosed that the interior cavity and inclusion property of β-CD were maintained in the synthesized β-CDP.     

Chitosan sponge matrices with β-cyclodextrin for berberine loading

Biocompatible polymer sponge materials based on biodegradable natural polymer chitosan, which can be loaded with clinician-selected drugs are still in the centre of interest for their wide use in clinical practice. This study shows possibilities of the technology which combines simple addition of β-cyclodextrin (β-CD), with dialdehyde starch (DAS) as a cross-linking agent of chitosan, to chitosan solutions for subsequent formation of sponge matrix. The advantage of such system is in avoiding chemical modifications and working only with natural substances. It is shown that, in matrix formation during lyophilisation, β-CD molecules tend to accumulate on the surface of the porous matrix structure. This was confirmed by a study of the known inclusion complex of β-CD and salicylic acid (SA) in heptane. The same study was applied to berberine (BER) which can also form an inclusion complex with β-CD in a water solution. Moreover, adsorption of drugs on the surface of the porous structure has to be also taken into account. This enables the production of sponge topical medical preparations useful for sustained release of BER.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

Sol-gel approach for fabrication of coated anodized titanium wire for solid-phase microextraction: highly efficient adsorbents for enrichment of trace polar analytes

Nanotubular titania film was prepared in situ on titanium wire and was used as the fiber substrate for solid-phase microextraction (SPME) because of its high surface-to-volume ratio, easy preparation, and mechanical stability. Three different functional coatings, β-cyclodextrin (β-CD), β-cyclodextrin-co-poly(ethylenepropylene glycol) (β-CD/PEG), and polyethylene glycol (PEG)-based sorbents were chemically bonded to the nanostructured wire surface via sol-gel technology to further enhance the absorbing capability and extraction selectivity. Coupled to gas chromatography-flame ionic detection (GC-FID), the prepared SPME fibers were investigated using diverse compounds. The results indicated that the fibers showed good mechanical strength, excellent thermal stability, and wonderful capacity and selectivity to polar compounds, including polar aromatic compounds, alcohols, and ketones. Combining the superior hydrophilic property of a bonded functional molecule and the highly porous structure of a fiber coating, the prepared PEG-coated SPME fiber showed much higher adsorption affinity to ephedrine and methylephedrine than β-CD and β-CD/PEG fibers. The as-established PEG-coated SPME-GC analytical method provided excellent sensitivity (LODs, 0.004 and 0.001 ng mL^–1 for ephedrine and methylephedrine, respectively) and better linear range (0.01–2 000 μg L^?1). In addition, it has surprising repeatability and reproducibility. Finally, the present approach was used to analyze ephedrine and methylephedrine from real urine samples, and reliable results were obtained.

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

3-位烯丙基及甲基衍生的β-环糊精固定相的合成及气相色谱性能研究

制备了一种新的β-环糊精衍生物固定相2,6-二-O-戊基-3-O-[(甲基)5(烯丙基)2]-β-CD,并对其气相色谱分离性能进行研究。实验显示,该固定相具有良好的柱表面性能和较强的色谱分离能力,对一些芳香族位置异构体的分离能力优于2,6-二-O-戊基-3-O-烯丙基-β-CD衍生物,对10余种手性物质显示出较好的选择性能,且对α-位取代的丙酸酯类手性分离效果明显优于杂环类β-CD衍生物。与2,6-二-O-戊基-3-O-烯丙基-β-CD固定相的分离性能比较表明,β-CD 3位羟基部分甲基基团的引入能增强对芳香族位置异构体的选择能力,但不能明显改变烯丙基衍生物的手性分离能力。     

The preparation of bovine serum albumin surface-imprinted superparamagnetic polymer with the assistance of basic functional monomer and its application for protein separation

Currently, small proteins imprinting are more reported since large proteins molecular imprinting faces challenge due to their bulk size and complex structure. In this work, bovine serum albumin (BSA) surface-imprinted magnetic polymer was successfully synthesized based on atomic transfer radical polymerization (ATRP) method in the presence of common monomer (N-isopropylacrylamide) with the assistant of basic functional monomer (N-[3-(dimethylamino)propyl]-methacrylamide), which provides a achievable attempt for imprinting larger target proteins based on the ATPR with the mild reaction conditions. The BSA-imprinted polymer exhibited higher adsorption capacity and selectivity to BSA over the non-imprinted polymer. Competitive adsorption tests indicated the BSA-imprinted polymer had better selective adsorption and recognition properties to BSA in the mixture. The obtained BSA-imprinted polymer was applied to bovine serum, which also showed selectivity to BSA. In addition, a conventional aqueous two-phase solution of PEG/sulphate was used as elution for adsorbed BSA, which was compared with common NaCl elution.     

Adsorption and Recovery of Ionic Surfactants by β-Cyclodextrin Polymer

The adsorption and recovery of ionic surfactants, such as dodecylbenzenesulfonic acid (DBS) and benzalkonium chloride (BKC), from an aqueous solution were studied using the β-cyclodextrin polymer (β-CDP). BKC always demonstrated a higher adsorption efficiency than DBS in batch tests, isotherms, and column tests. The adsorption characteristics of the surfactants seemed to be caused by inclusion into β-CD, and they were easily determined using the Langmuir adsorption isotherm. Furthermore, the surfactants adsorbed by β-CDP were easily released by shaking it with a mixture of water and methanol. Recovery efficiency was dependent on the mixture ratio of the solvent, and regenerated β-CDP was reusable as an adsorbent.     

Very sensitive differential pulse adsorptive stripping voltammetric determination of 4-nitrophenol at poly (diphenylamine)/multi-walled carbon nanotube-β-cyclodextrin-modified glassy carbon electrode

In this work, a glassy carbon electrode (GCE) modified with poly (diphenylamine)/multi-walled carbon nanotubes-β-cyclodextrin (PDPA/MWCNT-β-CD) film was constructed and used for the determination of 4-nitrophenol (4-NP). Diphenylamine was successfully electropolymerised onto MWCNT-β-CD-modified GCE by cyclic voltammetry in monomer solution and 5 mol L^?1 H₂SO₄. The surface morphology of PDPA/MWCNT-β-CD film was characterised using scanning electron microscopy and electrochemical impedance spectroscopy. After adsorption of 4-NP on PDPA/MWCNT-β-CD at 0.2 V for 150 s, it showed a well-defined reduction peak in phosphate buffer solution at pH = 7. The PDPA/MWCNT-β-CD film enhanced the reduction peak current due to the complex formation between β-CD and 4-NP, presence of conductive polymer film as electron transfer mediator and also ability of MWCNTs for strong adsorptive and catalytic effect. Peak current increased linearly with 4-NP concentration in the range of 0.1 to 13.9 µg L^?1. The detection limit was obtained as 0.02 µg L^?1, which is better than other reported detection limits for the determination of 4-NP. The results showed that modified electrode has good sensitivity and selectivity. This sensor was used for the determination of 4-NP in water samples.     

Development and evaluation of cyclodextrin complexed hydroxyapatite nanoparticles for preferential albumin adsorption

Our study focuses on the incorporation of β-CD into the HA structure, its effects on the phase of HA and the biological responses to proteins and blood cells. Hydroxyapatite (HA) containing levels of β-cyclodextrin (β-CD) of upto 0.9 wt% has been produced by co-precipitation method. The complexes were analyzed by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TG) and differential scanning analysis (DSC) methods. The size of the complexes as analyzed using DLS (dynamic light scattering) was between 150 nm and 350 nm. The results show that an increase in concentration of β-CD in the prepared samples that leads to an increase in hydrophobicity seems to promote an affinity for albumin adsorption. The PAGE results were substantiated by Lowry measurements and the results reveal that the H2 (containing 0.7 wt% β-CD) sample shows around 40% increase in albumin adsorption when compared to the H1 (containing 0.5 wt% β-CD) sample. The preferential adsorption of albumin has not been demonstrated in vivo. The ability to design particles that can preferentially interact with particular protein can obtain desired targeting effects. So the results indicate that HA/β-CD complexes have immense potential in targeted delivery of drugs. The in vivo potential of the developed samples was further confirmed in vitro by the results of cell aggregation and haemolytic activity.     

Complexation behaviour of polymers with pendant cyclodextrin side groups

The influence of the chain conformation on the formation of polymeric supramolecular complexes as well as the influence of the complexation on the conformation of the polymer chain has been studied. The complexation of pyrene into the cavity of β-cyclodextrin (β-CD) was investigated in aqueous solutions of β-CD substituted poly(allylamine) (PAA) under variation of external parameters, i.e. temperature, pH, ionic strength and addition of urea. The observed changes of the complexation constant K for the formation of the 2:1 β-CD/pyrene complex can be explained by a change of the chain flexibility which leads to a variation of the mean distance between neighbouring β-CD-moieties along the polymer chain. The intra-chain association of the decyl group with β-CD in PAA with co-pendant decyl and β-CD is disrupted by the addition of 1-adamantanamine HCl resulting in a more extended structure of the polymer. The β-CD moiety in PAA-CD shows one order of magnitude greater affinity to 2-(p-toluidyl)naphthalene-6-sulfonate than the native β-CD and the affinity increases further by the presence of decyl side groups.