Glycol-based sol-gel process for the fabrication of ferroelectric PZT thin films

A new sol-gel system using ethylene glycol was developed for the fabrication of PZT thin films with compositions near the morphotropic phase boundary Pb(Zr_0.52Ti_0.48)O₃. Ethylene glycol was used as both a chelating agent and a solvent to replace the highly toxic methoxyethanol used in previous formulations. Thin films were deposited by spin coating the solutions onto platinized silicon substrates. Films were completely crystallized by about 600°C and contained the ferroelectric perovskite phase. A dielectric constant of about 750–800 at 1 KHz was obtained for thin films of 0.3 µm thickness. The hysteresis measurements revealed a remanent polarization of 15 mC/cm² with a coercive field of 60 kV/cm.     

Study of a hydrogen-bombardment process for molecular cross-linking within thin films

A low-energy hydrogen bombardment method, without using any chemical additives, has been designed for fine tuning both physical and chemical properties of molecular thin films through selectively cleaving C-H bonds and keeping other bonds intact. In the hydrogen bombardment process, carbon radicals are generated during collisions between C-H bonds and hydrogen molecules carrying ～10 eV kinetic energy. These carbon radicals induce cross-linking of neighboring molecular chains. In this work, we focus on the effect of hydrogen bombardment on dotriacontane (C(32)H(66)) thin films as growing on native SiO(2) surfaces. After the hydrogen bombardment, XPS results indirectly explain that cross-linking has occurred among C(32)H(66) molecules, where the major chemical elements have been preserved even though the bombarded thin film is washed by organic solution such as hexane. AFM results show the height of the perpendicular phase in the thin film decreases due to the bombardment. Intriguingly, Young's modulus of the bombarded thin films can be increased up to ～6.5 GPa, about five times of elasticity of the virgin films. The surface roughness of the thin films can be kept as smooth as the virgin film surface after thorough bombardment. Therefore, the hydrogen bombardment method shows a great potential in the modification of morphological, mechanical, and tribological properties of organic thin films for a broad range of applications, especially in an aggressive environment.     

Fine pattern fabrication on SnO2:Sb thin films formed by the sol–gel process

The effects of UV irradiation on the properties of Sb⁵⁺ doped gel films were studied, which were prepared from stannic chloride (SnCl₄·5H₂O) and sodium alkoxide (NaOR) modified with benzytone (BzAcH). It was found that the absorption peak at around 335 nm due to the π → π* transition showed the formation of a chelate ring to Sn. The intensity of the absorption band decreased with UV light irradiation at 365 nm from a high‐pressure mercury lamp (250W). This finding showed that the SnO₂:Sb gel films modified with BzAcH were photosensitive to UV light. Additionally, this finding was applied to the fabrication of patterns on the SnO₂:Sb thin films. A gel film was irradiated through a mask and leached in water. Then a positive pattern was formed on the SnO₂:Sb thin films attached to the substrate. After heat treatment, the SnO₂:Sb gel films changed into transparent conductive films with an average conductivity of 1.20 × 10^?2Ω cm and with a transmission of 97.1%. Copyright © 2006 John Wiley & Sons, Ltd.     

Facile fabrication of photonic MOF films through stepwise deposition on a colloid crystal substrate

Based on stepwise deposition of MOF films on a colloid crystal substrate, a strategy for fabricating photonic MOF films was developed. We found that the integration of a photonic structure endows MOF materials with unique optical properties, which can be used as a general and effective transduction scheme for a convenient study of the host-guest chemistry of MOFs.     

Analysis of ALD-processed thin films by ion-beam techniques

This review introduces the possibilities of ion-beam techniques for the analysis of thin films and thin-film structures processed by atomic layer deposition (ALD). The characteristic features of ALD are also presented. The analytical techniques discussed include RBS, NRA and ERDA with its variants, viz. the TOF-ERDA and HI-ERDA. The thin film examples are taken from flat-panel display technology (TFEL structures) and the semiconductor industry (high-k insulators).Dedicated to the memory of Wilhelm Fresenius     

Simple fabrication of patterned gold nanoparticle arrays on functionalized block copolymer thin films

Patterned arrays of gold nanoparticles were fabricated using a simple dipping method that makes use of their specific interactions with nano-domains of carboxylic acid on a block copolymer template. Polystyrene-block-poly(tert-butyl acrylate) on the SU-8 photoresist pattern was selectively transformed to polystyrene-block-poly(acrylic acid). Au nanoparticles are selectively immobilized on the resulting carboxylic acid patterns to produce well-defined patterned Au nanoparticle arrays. This stable and robust template can be used to obtain any patterned nonaggregated metal or inorganic nanoparticle arrays.     

Reactive epoxy-functionalized thin films by a pulsed plasma polymerization process

A novel plasma functionalization process based on the pulsed plasma polymerization of allyl glycidyl ether is reported for the generation of robust and highly reactive epoxy-functionalized surfaces with well-defined chemical properties. Using a multitechnique approach including X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), infrared spectroscopy (FT-IR), atomic force microscopy (AFM) and ellipsometry, the effect of the plasma deposition parameters on the creation and retention of epoxy surface functionalities was characterized systematically. Under optimal plasma polymerization conditions (duty cycle: 1 ms/20 ms and 1 ms/200 ms), reactive uniform films with a high level of reproducibility were prepared and successfully used to covalently immobilize the model protein lysozyme. Surface derivatization was also carried out with ethanolamine to probe for epoxy groups. The ethanolamine blocked surface resisted nonspecific adsorption of lysozyme. Lysozyme immobilization was also done via microcontact printing. These results show that allyl glycidyl ether plasma polymer layers are an attractive strategy to produce a reactive epoxy functionalized surface on a wide range of substrate materials for biochip and other biotechnology applications.     

Analysis of thin films for industrial applications with a Scanning Auger Microprobe

Summary A commercial type Scanning Auger Microprobe has been applied to the analysis of industrial thin-film systems. The structure of sputter deposited WSi_x multilayer systems for microelectronic applications has been studied by ion beam produced tapered sections, and small inclusions within the sublayer have been identified by AES. Discoloured dots in a heat and sun protective layer structure have been referred to pinholes in the outermost oxidic sublayer and to the contamination of the reactive species S and Cl.

---

Analyse von industriellen Dünnschichtproben mit der Scanning-Auger-Mikrosonde

     

Rapid fabrication of metal organic framework thin films using microwave-induced thermal deposition

We have demonstrated a novel method to rapidly fabricate nanoporous MOF thin films and patterns on porous alumina substrates under microwave irradiation.     

Nanocrystalline TiO2/ZnO thin films: fabrication and application to dye-sensitized solar cells

Nanocrystalline TiO2 thin films composed of densely packed grains were deposited onto indium-doped tin oxide (ITO)-coated glass substrates at room temperature using a chemical bath deposition technique. A layer-by-layer (LbL) process was utilized to obtain a 1.418-microm-thick TiO2/ZnO structure. The TiO2 surface was super-hydrophilic, but its hydrophilicity decreased considerably after ZnO deposition. Other TiO2/ZnO films were studied to assess their suitability as photoelectrodes in dye-sensitized solar cells (DSSCs).     

Novel optical techniques for the analysis of polymer surfaces and thin films

Summary We report on novel optical techniques, based on evanescent waves, for the characterization of polymer surfaces and thin films. We first describe photo-ablation studies with polysilane films investigated by surface plasmon microscopy, a technique which is particularly well-suited for ultrathin samples. Thicker films that are homogeneous enough to carry optical waveguide modes can be characterized with high lateral resolution by the recently developed waveguide microscopy. We demonstrate this for a thin film of a solid polyelectrolyte. Finally, we report on surface plasmon field-enhanced Raman-spectroscopic and -imaging investigations of ultrathin Langmuir-Blodgett-Kuhn-layers of cadmium arachidate.W. Hickel is now with HOECHST AG, Angewandte Physik, W-6230 Frankfurt 80     

Modification and characterization of thin polymer films for electrochemical applications

Proton-conducting polymer membranes are utilized as the solid electrolyte in low temperature polymer electrolyte fuel cells (PEFC), which are efficient energy converters. We have selected the process of radiation grafting and subsequent sulfonation to prepare novel membranes because of its feasibility as a low cost production method. Investigations of the two first preparations steps, i.e., irradiation and grafting, lead to insight concerning the optimization of these two steps and the dependence of the final membrane properties on the various preparation parameters.     

AFM analysis of organic silane thin films for bioMEMS applications

Designing surfaces that elicit the desirable response is essential for bioMEMS (biological microelectromechanical systems) applications. To this end, we have developed two different types of silane film—hydrophobic and hydrophilic—using vinyltrichlorosilane and poly(ethylene glycol) silane, respectively. As the surface topography plays a very important role in governing protein or cell interactions, these films were characterized extensively using atomic force microscopy. All the films developed were found to have a very low root‐mean‐square roughness value (<1.3 nm). Furthermore, the topography of protein‐adsorbed silane‐modified surfaces was investigated because cell adhesion is mediated primarily by proteins. Three‐dimensional and section plots were able to differentiate the way in which protein interacts with hydrophobic and hydrophilic surfaces. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrochemical texturing of Al-doped ZnO thin films for photovoltaic applications

The processes during chemical and electrochemical etching of Al-doped ZnO are investigated utilizing a scanning flow cell setup with online detection of dissolved Zn ions. The rate of chemical dissolution was found to be a linear function of buffer and proton concentration in near neutral pH solutions according to a transport limited reaction. In contrast, electrochemical etching is limited by the kinetics of the reaction and increases linearly with the imposed current density. Due to this fundamental difference, the dissolution of Zn can be either uniform over the whole surface or highly localized at active sites like grain boundaries. A combined approach of chemical etching and the well-controllable galvanostatic dissolution thus allows a fine adjustment of the ZnO:Al surface texture for applications in silicon thin film photovoltaic cells in order to improve their overall energy conversion efficiency.     

Study of the structure of thin nanocrystalline films

Structure and phase composition of thin nanocrystalline films of semiconductors and insulators CdS, Cd_xZn_1?xS, SiC_xN_y, and BC_xN_y were studied using registration of weak diffraction intensities with synchrotron radiation. Three methods were developed and applied to obtain diffraction patterns, namely, θ—2-scan (Bragg—Brentano geometry); 2θ-scan (grazing incidence scheme); a scheme with an image plate as detector. The characteristic features of the diffraction patterns, obtained from the aforementioned samples, are discussed. The X-ray diffraction data are compared with the results obtained by HREM, SAED, electron spectroscopy, ellipsometry, IR and Raman spectroscopy. It is stated that: 1) the films are composed of nanocrystals, their size depending on the conditions of film deposition; 2) single crystalline substrate favors formation of oriented crystals, i.e., of the domains comprising uniformly oriented nanocrystals.