Adsorption of Cu(II) and Co(II) complexes on a silica gel surface chemically modified with 2-mercaptoimidazole

The isotherms of adsorption of MeX₂ (Me = Cu²⁺, Co²⁺; X = Cl^–, Br^–, ClO ₄ ^– ) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 °C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX₂ from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu²⁺ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO₄)₂ complex, the peak of absorption did not change for any degree of metal loading and for Cl^– and Br^– complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX₂(X = Cl^–, Br^–, ClO ₄ ^– ) analogues possess a distorted-tetrahedral field.     

Cu(II), Zn(II), AND Pb(II) STABILITY CONSTANTS OF CYCLAM AMPHIPHILES

Abstract

1-Hexadecyl-1,4,8,11-tetraazacyclotetradecane (hexadecyl cyclam) and 1-(3,7,11,15-tetramethyl) hexadecyl-1,4,8,11-tetraazacyclotetradecane (tetramethylhexadecyl cyclam) have been synthesized and their deprotonation and ligand-metal formation constants, K, determined for Cu(II), Zn(II) and Pb(II). The coupling of a long hydrocarbon chain to a ring nitrogen decreased the general ability of the cyclam ring to complex with metal ions. The greatest effect appeared to be for Cu(II) decreasing from a pK of 27 for cyclam to about 17. The titrations were fitted by HYPERQUAD and the concentrations of the intermediate complexes obtained as a function of pH. Metal-ligand complexes LMH₂ ⁴⁺, LMH₂₊ and LM₂₊ can coexist through a wide pH range. We have also calculated a composite metal-binding constant, K′, to reflect more accurately the overall ability of these ligands to bind a metal at any particular pH. K′, which is 14.6 for (hexadecyl cyclam)-Cu(II), is constructed from the concentrations of all the metal-chelated species at pH = 7. Generally, K′ is much lower than K.     

Synthesis,Characterization and Assessment of the Antioxidant Activity of Cu(II), Zn(II) and Cd(II) Complexes Derived from Scorpionate Ligands

Seeking to enrich the yet less explored field of scorpionate complexes bearing antioxidant properties, we, here, report on the synthesis, characterization and assessment of the antioxidant activity of new complexes derived from three scorpionate ligands. The interaction between the scorpionate ligands thallium(I) hydrotris(5-methyl-indazolyl)borate (TlTp^4Bo,5Me), thallium(I) hydrotris(4,5-dihydro-2H-benzo[g]indazolyl)borate (TlTp^a) and potassium hydrotris(3-tert-butyl- pyrazolyl)borate (KTp^tBu), and metal(II) chlorides, in dichloromethane at room temperature, produced a new family of complexes having the stoichiometric formula [M(Tp^4Bo,5Me)₂] (M = Cu, 1; Zn, 4; Cd, 7), [M(Tp^a)₂] (M = Cu, 2; Zn, 5; Cd, 8), [Cu(Hpz^tBu)₃Cl₂] (3), [Zn(Tp^tBu)Cl] (6) and [Cd(Bp^tBu)(Hpz^tBu)Cl] (9). The obtained metal complexes were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and elemental analysis, highlighting the total and partial hydrolysis of the scorpionate ligand Tp^tBu during the synthesis of the Cu(II) complex 3 and the Cd(II) complex 9, respectively. An assessment of the antioxidant activity of the obtained metal complexes was performed through both enzymatic and non-enzymatic assays against 1,1-diphenyl-2-picryl- hydrazyl (DPPH^·), 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS^+·), hydroxyl (HO^·), nitric oxide (NO^·), superoxide (O₂⁻) and peroxide (OOH^·) radicals. In particular, the complex [Cu(Tp^a)₂]⋅0.5H₂O (2) exhibited significant antioxidant activity, as good and specific activity against superoxide (O₂^−·), (IC50 values equal to 5.6 ± 0.2 μM) and might be identified as auspicious SOD-mimics (SOD = superoxide dismutase).     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

反相高效液相色谱法同时测定镉、铅、铜和锌

 研究了meso-四（对羟基苯基）卟啉为柱前衍生化试剂与Cd2+,Pb2+,Cu2+和Zn2+离子的配合反应条件及配合物在C18色谱柱上的分离条件,建立了反相高效液相色谱快速分离光度检测Cd2+,Pb2+,Cu2+和Zn2+的新方法。配合物和试剂在15 min内出峰完毕。4种离子的检出限为: Cd2+0.02 ng,Pb2+0.02 ng, Cu2+0.02 ng,Zn2+0.12 ng;线性范围为:Cd2+0.8 μg/L～150 μg/L,Pb2+0.8 μg/L～300 μg/L,Cu2+0.8 μg/L～500 μg/L,Zn2+5.0 μg/L～1 000 μg/L;方法的日内相对标准偏差为:2.8%～4.8%,测定低、中、高3个浓度的日间相对标准偏差为3.7%～9.7%。     

Pentacyanoferrates(II) on the surface of organomodified silica gel: The matrix effect

Pentacyanoferrate(II) absorbed on a silica gel surface previously modified with 3-aminopropyl and 3-imidazolylpropyl groups were characterized by¹³C MAS/NMR, FT-IR, Mössbauer spectroscopy, and cyclic voltammetry. FT-IR and¹³C MAS/NMR data indicated that the pentacyanoferrate(II) complex is bonded to the surface by the nitrogen atom of the functional group. The differences in the isomeric shifts, the quandrupole splittings and the midpoint potentials of the adsorbed complexes in comparison with the model complexes were attributed to the matrix polar effect—i.e., the interaction of the complex with polar groups on the silica surface.     

Determination of Pb(II) and Cu(II) by Electrothermal Atomic Absorption Spectrometry after Preconcentration by a Schiff Base Adsorbed on Surfactant Coated Alumina

1,2-Bis（salicylidenamino）ethane loaded onto sodium dodecyl sulfate-coated alumina was used as a new chelating sorbent for the preconcentration of traces of Pb（Ⅱ） and Cu（Ⅱ） prior to atomic absorption spectrometric determination. The influence of pH, flow rates of sample and eluent solutions, and foreign ions on the recovery of Pb（Ⅱ） and Cu（Ⅱ） by this sorbent has been studied. The retained ions were eluted with 4 mol·L nitric acid and determined by electrothermal atomic absorption spectrometry （ETAAS）. The data of limit of detection （3σ） for Pb（Ⅱ） and Cu（Ⅱ） were found to be 8.57 and 2.69 ng·L^-1 respectively, while the enrichment factor for both ions was 100. The proposed method was successfully applied to determination of lead and copper in different water samples.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

AgNP/Bi/Nafion‐modified Disposable Electrodes for Sensitive Zn(II), Cd(II), and Pb(II) Detection in Aerosol Samples

A new method for modifying electrodes with Ag nanoparticles (AgNPs) using electrospray deposition for sensitive, selective detection of Zn(II), Cd(II), and Pb(II) in aerosol samples when combined with Bismuth and Nafion coating and square‐wave anodic stripping voltammetry (SWASV) is reported. Carbon stencil‐printed electrodes (CSPEs) fabricated on a polyethylene transparency (PET) sheet were produced for an inexpensive, simple to fabricate, disposable sensor that can be used with the microliter sample volumes for analysis. Sensor performance was improved by modifying the electrode surface with electrospray‐deposited AgNPs. The use of electrospray deposition resulted in more uniform particle dispersion across the electrode surface when compared to drop‐casting. Using AgNP‐modified electrodes combined with Bi and Nafion, experimental detection limits (LODs) of 5.0, 0.5, and 0.1 μg L⁻¹ for Zn(II), Cd(II), and Pb(II), respectively, were achieved. The linear working ranges were 5.0–400.0 μg L⁻¹, 0.5–400.0 μg L⁻¹, and 0.1–500.0 μg L⁻¹ for Zn(II), Cd(II), and Pb(II), respectively. Interference studies showed Cu(II) was the only metal that interfered with this assay but inference could be eliminated with the addition of ferricyanide directly to the sample solution. This electrochemical sensor was applied for the simultaneous determination of Zn(II), Cd(II), and Pb(II) within source particulate matter (PM) samples collected on filters using an aerosol test chamber.     

火焰原子吸收法测定植物叶片中Pb、Cd、Cu、Zn含量

对八种植物叶片 (糖胶树、榕树、红花羊蹄甲、银合欢、垂叶榕、白玉兰、蟛蜞菊、大花紫薇 )中Pb、Cd、Cu、Zn的测定方法进行了研究 ,采用炭化—灰化—硝酸溶解方法进行样品处理 ,火焰原子吸收法测定Pb、Cd、Cu、Zn四种重金属元素。结果表明 ,该法准确 ,回收率高。各元素的回收率分别为 :铅 88%～ 1 0 5 %、镉 90 %～ 1 0 3 %、铜 90 %～ 1 0 5 %、锌 91 %～ 1 0 5 %。     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

Adsorption of Cu(II), Zn(II), Ni(II), Pb(II), and Cd(II) from aqueous solution on Amberlite IR-120 synthetic resin

The adsorption of copper(II), zinc(II), nickel(II), lead(II), and cadmium(II) on Amberlite IR-120 synthetic sulfonated resin has been studied at different pH and temperatures by batch process. The effects of parameters such as amount of resin, resin contact time, pH, and temperature on the ion exchange separation have been investigated. For the determination of the adsorption behavior of the resin, the adsorption isotherms of metal ions have also been studied. The concentrations of metal ions have been measured by batch techniques and with AAS analysis. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Freundlich isotherms. Here we report the method that is applied for the sorption/separation of some toxic metals from their solutions.     

Salen impregnated silica gel as a new sorbent for on-line preconcentration of cadmium(II)

A new sorbent – salen impregnated silica gel – was prepared and characterised for application as a minicolumn packing for flow-injection on-line preconcentration of cadmium(II). The system was coupled with flame atomic absorption spectrometer (FI-FAAS). The optimal pH for Cd(II) sorption was in the range of 7.4–8.8 and nitric acid (1%, v/v) was efficient as eluent. Sorption was most effective within the sample flow rate up to 7?mL?min^?1. Sorption capacity of the sorbent found in a batch procedure was 26.3?µmol?g^?1 (2.95?mg?g^?1). Enrichment factor (EF) and limit of detection (LOD) obtained for 120-second loading time were 113 and 0.26?µg?L^?1, respectively. The sorbent stability in the working conditions was proved for at least 100 preconcentration cycles. The evaluated method was applied to Cd(II) determination in various water samples.     

Adsorption behavior of Hg(II), Pb(II), and Cd(II) from aqueous solution on Duolite C-433: a synthetic resin

The adsorption behavior of Hg(II), Pb(II), and Cd(II) on Duolite C-433 synthetic resin has been determined at different temperatures by batch process. The various thermodynamic parameters, such as equilibrium constant K0, free energy DeltaG0, entropy DeltaS0, and enthalpy DeltaH0, have been calculated in order to predict the nature of sorption.     

2-line ferrihydrite: synthesis, characterization and its adsorption behaviour for removal of Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions

Nano-structured 2-line ferrihydrite was synthesized by a pH-controlled precipitation technique at 90 °C. Chemical, X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman analyses confirmed the sample to be 2-line ferrihydrite. The nano nature of the prepared sample was studied by transmission electron microscopy (TEM). The surface area obtained by the Brunauer-Emmett-Teller (BET) method was 175.8 m(2) g(-1). The nanopowder so obtained was used to study its behaviour for the removal of Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions. The relative importance of experimental parameters such as solution pH, contact time and concentration of adsorbate on the uptake of various cations was evaluated. By increasing the pH from 2.0 to 5.5, adsorption of the four cations increased. The kinetics parameters were compared by fitting the contact time data to both linear as well as non-linear forms of pseudo-second-order models. Linear forms of both Langmuir and Freundlich models fitted the equilibrium data of all the cations except for Pb(II) which was also fitted to the non-linear forms of both the models as it gave a low R(2) value of 0.85 for the Langmuir model. High Langmuir monolayer capacities of 366, 250, 62.5 and 500 mg g(-1) were obtained for Pb(II), Cd(II), Cu(II) and Zn(II), respectively. Presence of chloride or sulfate had an adverse effect on cation adsorption. The interactive effects on adsorption from solutions containing two, three or four cations were studied. Surprisingly no Cd(II) adsorption was observed in Pb(II)-Cd(II), Pb(II)-Cd(II)-Zn(II) and Pb(II)-Cd(II)-Cu(II)-Zn(II) systems under the studied concentration range. The overall loading capacity of the adsorbent decreased in mixed cation systems. Metal ion loaded adsorbents were characterized by XRD, FTIR and Raman techniques. The high adsorption capability of the 2-lines ferrihydrite makes it a potentially attractive adsorbent for the removal of cations from aqueous solutions.     

同一体系中铜(Ⅱ)、铅(Ⅱ)、镉(Ⅱ)、镍(Ⅱ)和钴(Ⅱ)的络合物吸附波及其分析应用

研究了丁二酮肟 氨 氯化铵 柠檬酸钠 明胶 抗坏血酸体系中Cu(Ⅱ )、Pb(Ⅱ )、Cd(Ⅱ )、Ni(Ⅱ )和Co(Ⅱ )的络合物吸附波 ,建立了同时测定水溶液中痕量相应元素的新方法。上述金属络合物分别在 -0 .44、-0 60、-0 .76、-1.0 7和 -1.2 4V左右产生灵敏的极谱波。信噪比为 3时 ,检出限分别为 1.0× 10 - 8、2 .3×10 - 8、1.3× 10 - 8、2 .9× 10 - 1 0 和 3 .6× 10 - 1 1 mol/L。铜、铅、镉、镍和钴的浓度分别为 2 .0× 10 - 8～ 2 .0× 10 - 5,4.8× 10 - 8～ 4.8× 10 - 5,3 .0× 10 - 8～ 3 .0× 10 - 5,5 .4× 10 - 1 0 ～ 5 .4× 10 - 7和 6.8× 10 - 1 1 ～ 6.8× 10 - 8mol/L时 ,与相应峰电流线性关系良好。方法用于同时快速测定实际样品中这些金属离子 ,获得满意结果     

Modification of silica nanoparticles with 1-hydroxy-2-acetonaphthone as a novel composite for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media

In this paper, a novel composite based on the formation of Schiff base on silica nanoparticles was facilely synthesized. Firstly, silica nanoparticles, which contain silanol groups (Si-OH), were modified with (3-aminopropyl)trimethoxysilane. Then, the modified silica reacted with 1-hydroxy-2-acetonaphthone to form a novel Schiff base/silica composite. The synthesized composite was characterized using several tools such as XRD, FT-IR, FE-SEM, N₂ adsorption/desorption analyzer, and CHN analyzer. The considerable reduction at 2θ = 21.9° in the intensity of the XRD peak of the composite is owing to the formation of the Schiff base. Also, the observed FT-IR bands in the composite at 3440 and 1604 cm^?1 are owing to the stretching and bending vibrations of OH and/or CN, respectively. The FE-SEM images confirmed that the silica includes irregular shapes whereas the composite possesses a flaky surface owing to the formation of the Schiff base. Elemental analysis of the composite demonstrated that the % C, % H, and % N are 15.26, 3.24, and 1.65 %, respectively. The BET surface area and total pore volume of the composite were reduced because the formed Schiff base blocks the pores of silica. The synthesized composite was employed for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media. The maximum uptake capacity of the composite toward Cu(II), Hg(II), Zn(II), and Ni(II) ions is 68.630, 50.942, 45.126, and 40.420 mg/g, respectively. The adsorption processes of the studied metal ions were spontaneous, chemical, and well described using the pseudo-second-order kinetic model and Langmuir equilibrium isotherm. The synthesized composite can be successfully regenerated and utilized various times in the removal of studied metal ions from aqueous media.     

Synthesis of pyridin-3-yl-functionalized silica as a chelating sorbent for solid-phase adsorption of Hg(II), Pb(II), Zn(II), and Cd(II) from water

Silica gel modified with 3-aminopropyltrimethoxysilane was anchored with nicotinaldehyde to prepare a new chelating surface (or matrix). It was synthesized and characterized by elemental analysis, cross-polarization magic-angle spinning ¹³C nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier-transform spectroscopy, nitrogen adsorption–desorption isotherm, Brunauer–Emmett–Teller surface area, and Barrett–Joyner–Halenda pore sizes. The new surface exhibits good chemical and thermal stability as determined by thermogravimetry curves. This new organic–inorganic material was used for preconcentration of Hg(II), Pb(II), Zn(II), and Cd(II) from water prior to their determination by inductively coupled plasma atomic emission spectrometry. The optimum pH for quantitative sorption of these metal ions is in the range of 6–8, and the sorption capacity is in range of 486–1,449 μmol/g. By batch method, 95 % extraction takes ≤30 min. All the metals could be desorbed with a solution of hydrochloric acid (6 N) without loss of the expensive ligand. Solutions of the metal ions were prepared by dissolution of the nitrate solution.