Chloropalladated propargyl amine: a highly efficient phosphine-free catalyst precursor for the Heck reaction

[reaction: see text] The palladacycle (Pd[k(1)-C, k(1)-N-C=(C(6)H(5))C(Cl)CH(2)NMe(2)](mu-Cl))(2) 1 derived from the chloropalladation of 3-(dimethylamino)-1-phenyl-1-propyne promotes the arylation of olefins under relatively mild reaction conditions. The coupling of iodoarenes and activated bromoarenes with n-butylacrylate and styrene occurs at room temperature. Turnover numbers of up to 85 000 have been achieved with deactivated bromoarenes and up to 1000 for activated chloroarenes at higher temperatures (80-150 degrees C).     

Task-specific ionic liquid as base, ligand and reaction medium for the palladium-catalyzed Heck reaction

A novel ionic liquid, which was based on ethanolamine-functionalized quaternary ammonium salt was designed and synthesized. 4-Di(hydroxyethyl)aminobutyl tributylammonium bromide (DHEABTBAB) 1, a task-specific ionic liquid, which acts as a base, ligand and reaction medium, exhibits a very high activity and recyclability to palladium-catalyzed Heck reaction. The olefinations of iodoarenes, bromoarenes and chloroarenes with olefins generated the corresponding cross-coupling products in good to excellent yields only in the presence of DHEABTBAB and palladium acetate under phosphine-free reaction conditions. It is noteworthy that palladium and DHEABTBAB could be repeatedly recycled and reused for six consecutive trials without significant loss of their activities.     

Cu(I)-amido complexes in the Ullmann reaction: reactions of Cu(I)-amido complexes with iodoarenes with and without autocatalysis by CuI

A series of Cu(I)-amido complexes both lacking ancillary ligands and containing 1,10-phenanthroline (phen) as ancillary ligand have been prepared. These complexes react with iodoarenes to form arylamine products, and this reactivity is consistent with the intermediacy of such complexes in catalytic Ullmann amination reactions. The stoichiometric reactions of the Cu(I)-amido complexes with iodoarenes are autocatalytic, with the free CuI generated during the reaction serving as the catalyst. Such autocatalytic behavior was not observed for reactions of iodoarenes with copper(I) amidates, imidates, or phenoxides. The selectivity of these complexes for two sterically distinct aryl halides under various conditions imply that the autocatalytic reaction proceeds by forming highly reactive [CuNPh(2)](n) lacking phen. Reactions with radical probes imply that the reactions of phen-ligated Cu(I)-amido complexes with iodoarenes occur without the intermediacy of aryl radicals. Density functional theory calculations on the oxidative addition of iodoarenes to Cu(I) species are consistent with faster reactions of iodoarenes with CuNPh(2) species lacking phen in DMSO than reactions of iodoarenes with LCuNPh(2) in which L = phen. The free-energy barrier computed for the reaction of PhI with (DMSO)CuNPh(2) was 21.8 kcal/mol, while that for the reaction of PhI with (phen)CuNPh(2) was 33.4 kcal/mol.     

卤化亚铜三苯基膦络合物的XPS振起伴峰及其价带谱研究

卤化亚铜三苯基膦络合物(Ph_3P)_3Cu_nX_n(n=1,2;X=Cl,Br,I和CN)具有较好的催化活性和选择性,因而引起了人们的注意。X射线衍射研究表明(Ph_3P)_3CuX中Cu具有四配位的结构,而(Ph_3P)_3Cu_2X_2中Cu却具有四配位和三配位的结构。由XPS来表征它们的成键特征的工作尚未见诸报道。实验按文献[6]所述方法制备络合物。经熔点测定、元素分析,证实所制样品的纯度符合要求。按标准方法纯化氯化亚铜和溴化亚铜,并将新制样品置于充满高纯氮的干燥器中。测试     

Catalytic activity of palladium(II) diaminocarbene complexes in the Sonogashira and Suzuki reactions

Palladium(II) complexes with chelating and non-chelating diaminocarbene ligands were assessed as catalysts in the cross-coupling reactions of haloarenes with oct-1-yne (Sonogashira reaction) and phenylboronic acid (Suzuki reaction). Both complexes exhibited a higher catalytic activity than traditional phosphine ligandbased systems in the Sonogashira reaction, and they ensured cross-coupling not only with iodoarenes but also with bromoarenes activated by electron-withdrawing substituents. The catalytic activities of the examined complexes in the Suzuki reaction were appreciably different: the palladium(II) complex with the chelating ligand turned out to be considerably less active than the complex with the non-chelating ligand.     

Synthesis of a diverse set of phosphorus ligands on solid support and their screening in the Heck reaction

Representative members from five different families of supported phosphine and phosphinite ligands have been prepared from common templates—polymer-bound aminoalcohols. These include β-aminophosphines, N,β-diphosphinoamines, α,β-diphosphinoamines, β-aminophosphinites and N-phosphino-β-aminophosphinites. Representatives of each family of ligands were complexed with Pd(OAc)₂ and screened in the Heck reaction of iodo- and bromobenzene. While the reaction of iodoarenes is ligand-independent, the reaction of bromoarenes is ligand-sensitive. The rationale for this behavior is suggested. Lead ligands for the reaction of bromoarenes were determined.     

Syntheses, structures and magnetism of linear tri- and tetra-copper chains containing anions of N,N'-bis(pyrimidine-2-yl)formamidine

Reaction of Kpmf (pmf(-) = anion of N,N'-bis(pyrimidyl-2-yl)formamidine, Hpmf) with divalent copper salt CuX2 afforded the linear trinuclear complexes of the type [Cu3(pmf)4](X)2 (X = BF4, 1; NO3, 2; ClO4, 3), while reaction of Kpmf with monovalent copper salt CuX gave the linear tetranuclear complexes of the type Cu4(pmf)4X2 (X = Cl, 4; Br, 5). The copper atoms of complexes 1-5 are helically bridged by four pmf(-) ligands, resulting in three different coordination modes for the pmf(-) ligands. In complexes 1-3, one pmf(-) ligand adopts a new coordination mode with the two amine nitrogen atoms chelating to the central copper atom, while the other three feature chelation by one pyrimidyl and one adjacent amine nitrogen atoms. The Cu(II)...Cu(II) distances are 2.729(2) and 2.825(2) A for 1, 2.762(1) and 2.832(1) A for 2 and 2.732(1) and 2.827(1) A for 3. In complexes 4 and 5, the pmf(-) ligands are coordinated to the copper atoms in tetradentate fashion with each nitrogen atom coordinating to one Cu atom. The Cu...Cu distances are 2.580(1) and 2.549(1) A for 4 and 2.582(1) and 2.561(1) A for 5. Antiferromagnetic interactions between the copper ions are observed with calculated g and J values of 2.03(1) and -188(2) cm(-1) for 1, 2.09(1) and -268(3) cm(-1) for 2, and 2.09(1) and -486(2) cm(-1) for 5. By comparing the magnetic data it can be shown that the bonding mode of the pmf(-) ligand is one of the important factors in determining the strengths of the Cu...Cu interactions in linear trinuclear and tetranuclear copper complexes.     

Take the Right Catalyst: Palladium-Catalyzed C-C, C-N, and C-O Bond Formation on Chloroarenes

Unreactive chloroarenes have been outwitted: The key to successful C-C, C-N, and C-O bond formation on chloroarenes is the development and optimization of suitable catalysts. Electron-rich alkylphosphanes are mandatory as ligands in these palladium-catalyzed reactions.     

Synthesis,characterisation and biological activity of cycloaurated organogold(III) complexes with imidate ligands

The reactions of the cycloaurated gold(III) complexes (2-bp)AuCl₂ (2-bp = 2-benzylpyridyl) or (damp)AuCl₂ (damp = Me₂NCH₂C₆H₄) with an excess of sodium saccharinate (Nasacc), potassium phthalimidate (Kphth), or with isatin and trimethylamine in refluxing methanol results in the successful isolation of a series of new gold(III) imidate complexes. These were characterised by NMR and IR spectroscopies, and by X-ray structure determinations on (2-bp)Au(sacc)₂ and (2-bp)Au(phth)₂. In both structures, the planes of the saccharinate and the phthalimidate ligands are orientated almost perpendicular to the gold coordination plane. As expected from trans-influence considerations, the Au–N_(imidate) bond lengths trans to the aryl carbon atoms are longer than the Au–N_(imidate) bond lengths trans to the pyridyl groups. The complexes have also been characterised by electrospray ionisation MS; in the presence of halide ligands, one imidate ligand is readily displaced. Anti-tumour (P388 murine leukemia) and selected anti-microbial data for the new complexes are reported. Surprisingly, all three damp complexes had low anti-tumour activity, which is likely to be a consequence of the poor solubility of these complexes. The synthesis and characterisation of a related gold(III) bis(amidate) complex derived from sulfathiazole is also described.     

A complete series of copper(II) halide complexes (X = F, Cl, Br, I) with a novel Cu(II)-C(sp3) bond

A complete series of copper(ii) halide complexes [CuX(tptm)](X = F (), Cl (), Br (), I (); tptm = tris(2-pyridylthio)methyl) with a novel Cu(II)-C(sp(3)) bond has been prepared by the reactions of [Cu(tptm)(CH(3)CN)]PF(6)(.PF(6)) with corresponding halide sources of KF or n-Bu(4)NX (X = Cl, Br, I), and the trigonal bipyramidal structures have been confirmed by X-ray crystallography and/or EPR spectroscopy. The iodide complex easily liberates the iodide anion in acetonitrile forming the acetonitrile complex as a result. The EPR spectra of the complexes showed several superhyperfine structures that strongly indicated the presence of spin density on the halide ligands through the Cu-X bond. The results of DFT calculations essentially matched with the X-ray crystallographic and the EPR spectroscopic results. Cyclic voltammetry revealed a quasi-reversible reduction wave for Cu(II)/Cu(I) indicating a trigonal pyramidal coordination for Cu(I) states. A coincidence of the redox potential for all [CuX(tptm)](0/+) processes indicates that the main oxidation site in each complex is the tptm ligand.     

Kupfer(I)-Komplexe mit 1-Azadien-Chelatliganden und ihre Reaktion mit Sauerstoff

Copper(I) Complexes with 1-Azadiene Chelate Ligands and Their Reaction with Oxygen The reaction of the bidendate 1-azadiene ligands Me₂N? (CH₂)_n? N?CH? CH?CH? Ph with CuX results in the formation of the dimeric compounds [ A CuX]₂ and [ B CuX]₂ ( A : n = 2, B : n = 3, X: I, Cl). The structure of complex 1 [ A CuI]₂ was determined by X-ray crystal structure analysis. 1 consists of two tetrahedrally coordinated Cu atoms connected by two iodo bridges. (Cu? Cu bond length: 261 pm). The ligand Me? N(CH₂CH₂N?CH? CH?CH? Ph)₂ ( C ) reacts with CuX to form the monomeric complexes [ C CuX] ( 5 : X?I, 6 : X?Cl). The crystal structure of 5 shows that the ligand acts as a tridendate ligand. The bond lengths of the CuN(sp²) bonds are significantly shorter than the Cu? N(sp³) distance. Reacting the podand-type ligands N(CH₂CH₂? N?CH? R)₃ ( D : R?Ph, E : R?-CH?CH? Ph) with CuX yields the ionic complexes 7 [ D Cu][CuCl₂] and 8 [ E Cu][CuCl₂]. 7 was characterized by X-ray analysis which confirmed that D acts as a four-dendate podand ligand. The compounds 1 ? 8 are unreactive towards CO₂ but take up O₂ even at deep temperatures. At ?78°C the orange-red complex 4 [ B CuCl]₂ reacts with O₂ in CH₂Cl₂ to form a deep violet solution, but the primary product of the oxidation could not be isolated. It reacts at room temperature to form the green complex 9 [μ-Cl, μ-OH][ B CuCl]₂. The X-ray structure analysis of 9 confirms that a dimeric Cu^II complex is formed in which both a chloro- and a hydroxo group are bridging the monomeric units. The Cu^II centers exhibit a distorted tetragonal-pyramidal coordination. The pathway of the reaction with O₂ will be discussed.     

Tri- and tetracoordinate copper(I) complexes bearing bidentate soft/hard SN and SeN ligands based on 2-aminopyridine

The coordination properties of the EN ligands N-(2-pyridinyl)amino-diphenylphosphine sulfide, N-(2-pyridinyl)amino-diisopropylphosphine sulfide, N-(2-pyridinyl)amino-diphenylphosphine selenide, N-(2-pyridinyl)amino-diisopropylphosphine selenide towards copper(I) precursors CuX (X = Br, I), [Cu(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), and [Cu(CH(3)CN)(4)]PF(6) were studied. Treatment of CuX with EN ligands resulted in the formation of tricoordinate complexes of the type [Cu(κ(2)(E,N)-EN)X]. The reaction of [Cu(IPr)Cl] with EN ligands, followed by halide abstraction with AgSbF(6), afforded cationic tricoordinate complexes [Cu(κ(2)(S,N)-EN)(IPr)](+), while the reaction of [Cu(CH(3)CN)(4)](+) with two equivalents of EN ligands yielded tetrahedral complexes [Cu(κ(2)(E,N)-EN)(2)](+). Halide removal from [Cu(κ(2)(S,N)-SN)I] with silver salts in the presence of L = CH(3)CN and CNtBu afforded dinuclear complexes of the type [Cu(κ(2)(S,N),μ(S)-SN)(L)](2)(2+) containing bridging SN ligands. With the terminal alkynes HC≡CC(6)H(4)Me and HC≡CC(6)H(4)OMe, complexes of the formula [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)Me)](+) and [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)OMe)](+) were obtained. The mononuclear nature of these compounds was supported by DFT calculations. Most complexes were also characterized by X-ray crystallography.     

Copper(I) complexes with trispyrazolylmethane ligands: synthesis, characterization, and catalytic activity in cross-coupling reactions

Three novel Cu(I) complexes bearing tris(pyrazolyl)methane ligands, Tpm(x), have been prepared from reactions of equimolar amounts of CuI and the ligands Tpm, (HC(pz)(3)), Tpm*, (HC(3,5-Me(2)-pz)(3)), and Tpm(Ms), (HC(3-Ms-pz)(3)). X-ray diffraction studies have shown that the Tpm and Tpm(Ms) derivatives exhibit a 2:1 Cu:ligand ratio, whereas the Tpm* complex is a mononuclear species in nature. The latter has been employed as a precatalyst in the arylation of amides and aromatic thiols with good activity. The synthesis of a Tpm*Cu(I)-phthalimidate, a feasible intermediate in this catalytic process, has also been performed. Low temperature (1)H NMR studies in CDCl(3) have indicated that this complex exists in solution as a mixture of two, neutral and ionic forms. Conductivity measurements have reinforced this proposal, the ionic form predominating in a very polar solvent such as DMSO. The reaction of Tpm*Cu(I)-phthalimidate with iodobenzene afforded the expected C-N coupling product in 76% yield accounting for its role as an intermediate in this transformation.     

Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Coordination polymers of copper(I) halides

A total of 21 complexes of CuX (X = Cl, Br, I) with bridging ligand (B = 4,4'-dipyridyl (Bpy), pyrazine (Pyz), quinoxaline (Quin), phenazine (Phz), 1,4-diazabicyclo[2.2.2]octane (DABCO), and hexamethylenetetramine (HMTA)) have been synthesized. The products show two stoichiometries: [CuXB] (type 1) and [(CuX)2B] (type 2). Both types can be obtained for B = Bpy, depending on the conditions of preparation. In these cases, the type 2 stoichiometry is the kinetic product. Type 2 complexes only are found for B = Pyz (X = I), Quin, Phz, DABCO, and HMTA. Type 1 complexes form for Pyz (X = Cl, Br). Thermogravimetic analyses of the complexes reveal the general decomposition trend: 1 --> 2 --> [(CuX)2B(1/2)] --> CuX. The X-ray crystal structure of [CuBr(Pyz)] (type 1) features copper atoms bridged by Br and Pyz, forming 2D sheets of fused rectangular Cu4Br2(Pyz)2 units. The X-ray structure of [(CuI)2(Quin)] (type 2) shows 2D layers composed of [Cu2I2]infinity "stair step" chains which are cross-linked by Quin ligands. A total of 16 complexes of CuXL (L = P(OPh)3) with bridging ligand (B = those above and 1,4-dimethylpiperazine (DMP)) have also been prepared. All of these products, except those of HMTA, are of type 3 formulation, [(CuXL)2B]. The HMTA products have the formula [CuX(HMTA)], type 4. Thermal decomposition of the type 3 and 4 complexes occurs with initial loss of B, L, or both. The X-ray structures of [(CuBrL)2(Bpy)] and [(CuBrL)2(Pyz)] (type 3) reveal 1D chains formed from rhomboidal (LCu)2Br2 units linked by the B ligand. The type 4 structure of [CuBrL(HMTA)] is shown by X-ray to be a simple halide-bridged dimer.     

Intermolecular hydroamination of oxygen-substituted allenes. New routes for the synthesis of N,O-chelated zirconium and titanium amido complexes

Intermolecular hydroamination of heteroatom-substituted allenes with a bulky arylamine was carried out using a bis(amidate) bis(amido) titanium(IV) complex (1) as a precatalyst. The reaction of 2,6-dimethylaniline with oxygen-substituted allene 2c or 2d in the presence of complex 1 gives the ketimine regioisomer as the exclusive product. Reduction of such ketimine products resulted in the formation of amino ethers that were further employed as proligands for the formation of N,O-chelating five-membered titana- and zirconacycles. Such sterically demanding N,O-chelating ligands result in the high-yielding preparation of mono-ligated products. Solid-state molecular structures of all the complexes revealed distorted trigonal bipyramidal geometry about the metal centers, with a dative bond between the metal and the oxygen donor atom. These new complexes obtained using hydroamination as the key-step in ligand preparation were also shown to be useful cyclohydroamination precatalysts in their own right.     

Fused pyridazines: rigid multidentates for designing and fine-tuning the structure of hybrid organic/inorganic frameworks

Fused pyridazines (1,2,3,6,7,8-hexahydro-cinnolino[5,4,3-cde]cinnoline, L and its 2,2,7,7-tetramethyl derivative, Me4L) are designed as rigid multidentate ligands for the construction of framework solids. In combination with copper(I) bromide (iodide) they provide excellent structural examples for predictive engineering and the possibilities for further fine-tuning of the framework architectures facilitated by the tetradentate function of the ligands and effective cooperation of organic and inorganic bridges. This study features control over helical structures for (CuX)n chains and homo/heterochiral combination of the helices in the lattice, the design of a range of channelled and tubular CuX networks and the structural significance of ligand shape complementarity. 3D tetragonal Cu2X2(L) frameworks exist either as chiral or achiral supramolecular isomers Cu2I2(Me4L) and Cu12I12[Cu(CH3CN)]3(L)(6-)Cu3I6.CH3CN illustrate 3D hexagonal channelled and tubular arrays; Cu2I2(Me4L)(CH3CN) and Cu4I4(L)(CH3CN)2 complexes are 1D polymers.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.     

Coordination complexes exhibiting anion...pi interactions: synthesis, structure, and theoretical studies

The polydentate ligand 2,4,6-tris(dipyridin-2-ylamino)-1,3,5-triazine (dpyatriz) in combination with the Cu(ClO 4) 2/CuX 2 salt mixtures (X (-) = Cl (-), Br (-), or N 3 (-)) leads to the formation of molecular coordination aggregates with formulas [Cu 3Cl 3(dpyatriz) 2](ClO 4) 3 ( 2), [Cu 3Br 3(dpyatriz) 2](ClO 4) 3 ( 3), and [Cu 4(N 3) 4(dpyatriz) 2(DMF) 4(ClO 4) 2](ClO 4) 2 ( 4). These complexes consist of two dpyatriz ligands bridged via coordination to Cu (II) and disposed either face-to-face in an eclipsed manner ( 2 and 3) or parallel and mutually shifted in one direction. The copper ions complete their coordination positions with Cl (-) ( 2), Br (-) ( 3), or N 3 (-), ClO 4 (-), and N, N-dimethylformamide (DMF) ( 4) ligands. All complexes crystallize together with noncoordinate ClO 4 (-) groups that display anion...pi interactions with the triazine rings. These interactions have been studied by means of high level ab initio calculations and the MIPp partition scheme. These calculations have proven the ClO 4 (-)...[C 3N 3] interactions to be favorable and have revealed a synergistic effect from the combined occurrence of pi-pi stacking of triazine rings and the interaction of these moieties with perchlorate ions, as observed in the experimental systems.     

Cross—Coupling of Aryl Iodides with Malononitrile Catalyzed by Palladium N—Heterocyclic Carbene Complex System

Eight N-heterocyclic carbenes (NHC),generated in situ from their imidazolium salts,as ligands of palladium complexes were used for the catalytic coupling of iodobenzene with malononi-trile anion,It was found that 1,3-bis(2,4,6-trimethylphenyl)-imidazolium chloride (IMesHCl)-Pd2(dba)3 catalytic system has the highest activity to obtain phenyl malononitrile among the imidazolium salts.The substituted iodoarenes reacted with malononitrile anions by using the catalytic system to give cross-coupling products in yields from 50% to 96%.