Quantitative analysis of the effect of salt concentration on enzymatic catalysis.

Like pH, salt concentration can have a dramatic effect on enzymatic catalysis. Here, a general equation is derived for the quantitative analysis of salt-rate profiles: k(cat)/K(M) = (k(cat)/K(M))(MAX)/[1+([Na+]/K[Na+])(n')], where (k(cat)/K(M))(MAX) is the physical limit of k(cat)/K(M), K(Na+) is the salt concentration at which k(cat)/K(M) = (k(cat)/K(M))(MAX)/2, and -n' is the slope of the linear region in a plot of log(k(cat)/K(M)) versus log [Na+]. The value of n' is of special utility, as it reflects the contribution of Coulombic interactions to the uniform binding of the bound states. This equation was used to analyze salt effects on catalysis by ribonuclease A (RNase A), which is a cationic enzyme that catalyzes the cleavage of an anionic substrate, RNA, with k(cat)/K(M) values that can exceed 10(9) M(-1) s(-1). Lys7, Arg10, and Lys66 comprise enzymic subsites that are remote from the active site. Replacing Lys7, Arg10, and Lys66 with alanine decreases the charge on the enzyme as well as the value of n'. Likewise, decreasing the number of phosphoryl groups in the substrate decreases the value of n'. Replacing Lys41, a key active-site residue, with arginine creates a catalyst that is limited by the chemical conversion of substrate to product. This change increases the value of n', as expected for a catalyst that is more sensitive to changes in the binding of the chemical transition state. Hence, the quantitative analysis of salt-rate profiles can provide valuable insight into the role of Coulombic interactions in enzymatic catalysis.     

Modulation of the catalytic behavior of alpha-chymotrypsin at monolayer-protected nanoparticle surfaces

Amino-acid-functionalized gold clusters modulate the catalytic behavior of alpha-chymotrypsin (ChT) toward cationic, neutral, and anionic substrates. Kinetic studies reveal that the substrate specificity (k(cat)/K(M)) of ChT-nanoparticle complexes increases by approximately 3-fold for the cationic substrate but decreases by 95% for the anionic substrate as compared with that of free ChT, providing enhanced substrate selectivity. Concurrently, the catalytic constants (k(cat)) of ChT show slight augmentation for the cationic substrate and significant attenuation for the anionic substrate in the presence of amino-acid-functionalized nanoparticles. The amino acid monolayer on the nanoparticle is proposed to control both the capture of substrate by the active site and release of product through electrostatic interactions, leading to the observed substrate specificities and catalytic constants.     

Beta-D-xylosidase from Selenomonas ruminantium: thermodynamics of enzyme-catalyzed and noncatalyzed reactions

Beta-D-Xylosidase/alpha-L-arabinofuranosidase from Selenomonas ruminantium is the most active enzyme known for catalyzing hydrolysis of 1,4-beta-D: -xylooligosaccharides to D-xylose. Temperature dependence for hydrolysis of 4-nitrophenyl-beta-D-xylopyranoside (4NPX), 4-nitrophenyl-alpha-L-arabinofuranoside (4NPA), and 1,4-beta-D-xylobiose (X2) was determined on and off (k (non)) the enzyme at pH 5.3, which lies in the pH-independent region for k (cat) and k (non). Rate enhancements (k (cat)/k (non)) for 4NPX, 4NPA, and X2 are 4.3 x 10(11), 2.4 x 10(9), and 3.7 x 10(12), respectively, at 25 degrees C and increase with decreasing temperature. Relative parameters k (cat) (4NPX)/k (cat) (4NPA), k (cat) (4NPX)/k (cat) (X2), and (k (cat)/K (m))(4NPX)/(k (cat)/K (m))(X2) increase and (k (cat)/K (m))(4NPX)/(k (cat)/K (m))(4NPA), (1/K (m))(4NPX)/(1/K (m))(4NPA), and (1/K (m))(4NPX)/(1/K (m))(X2) decrease with increasing temperature.     

Synthesis and esterolytic activity of catalytic peptide dendrimers

Peptide dendrimers were prepared by solid-phase peptide synthesis. Monomeric dendrimers were first obtained by assembly of a hexapeptide sequence containing alternate standard alpha-amino acids with diamino acids as branching units. The monomeric dendrimers were then dimerized by disulfide-bridge formation at the core cysteine. The synthetic strategy is compatible with functional amino acids and different diamino acid branching units. Peptide dendrimers composed of the catalytic triad amino acids histidine, aspartate, and serine catalyzed the hydrolysis of N-methylquinolinium salts when the histidine residues were placed at the outermost position. The dendrimer-catalyzed hydrolysis of 7-isobutyryl-N-methylquinolinium followed saturation kinetics with a rate constant of catalysis/rate constant without catalysis (k(cat)/k(uncat)) value of 3350 and a rate constant of catalysis/Michaelis constant (k(cat)/K(M)) value 350-fold larger than the second-order rate constant of the 4-methylimidazole-catalyzed reaction; this corresponds to a 40-fold rate enhancement per histidine side chain. Catalysis can be attributed to the presence of histidine residues at the surface of the dendrimers.     

Inhibitor scaffolds as new allele specific kinase substrates

The elucidation of protein kinase signaling networks is challenging due to the large size of the protein kinase superfamily (>500 human kinases). Here we describe a new class of orthogonal triphosphate substrate analogues for the direct labeling of analogue-specific kinase protein targets. These analogues were constructed as derivatives of the Src family kinase inhibitor PP1 and were designed based on the crystal structures of PP1 bound to HCK and N(6)-(benzyl)-ADP bound to c-Src (T338G). 3-Benzylpyrazolopyrimidine triphosphate (3-benzyl-PPTP) proved to be a substrate for a mutant of the MAP kinase p38 (p38-T106G/A157L/L167A). 3-Benzyl-PPTP was preferred by v-Src (T338G) (k(cat)/K(M) = 3.2 x 10(6) min(-)(1) M(-)(1)) over ATP or the previously described ATP analogue, N(6) (benzyl) ATP. For the kinase CDK2 (F80G)/cyclin E, 3-benzyl-PPTP demonstrated catalytic efficiency (k(cat)/K(M) = 2.6 x 10(4) min(-)(1) M(-)(1)) comparable to ATP (k(cat)/K(M) = 5.0 x 10(4) min(-)(1) M(-)(1)) largely due to a significantly better K(M) (6.4 microM vs 530 microM). In kinase protein substrate labeling experiments both 3-benzyl-PPTP and 3-phenyl-PPTP prove to be over 4 times more orthogonal than N(6)-(benzyl)-ATP with respect to the wild-type kinases found in murine spleenocyte cell lysates. These experiments also demonstrate that [gamma-(32)P]-3-benzyl-PPTP is an excellent phosphodonor for labeling the direct protein substrates of CDK2 (F80G)/E in murine spleenocyte cell lysates, even while competing with cellular levels (4 mM) of unlabeled ATP. The fact that this new more highly orthogonal nucleotide is accepted by three widely divergent kinases studied here suggests that it is likely to be generalizable across the entire kinase superfamily.     

Release of enzyme strain during catalysis reduces the activation energy barrier

Several mechanisms have been considered as principal factors in enhancing the catalytic reaction velocity of enzymes: approximation, covalent catalysis, general acid-based catalysis, and strain. Among them, the strain on the substrate and/or the enzyme is often found to be brought about on association of the substrate and the enzyme. If this strain is released in the transition state, it contributes to enhancing the k(cat) value, although it does not change the k(cat)/K(m) value. In aspartate aminotransferase, however, we found by analysis of the Schiff base pK(a) values that the unliganded enzyme carries a strain in the protonated Schiff base formed between the coenzyme pyridoxal phosphate and a lysine residue. This bond is cleaved in most of the reaction intermediates, including the transition state. As a result, the activation energy between the free enzyme plus substrate and the transition state is decreased by 16 kJ/mol, equal to the value of the strain energy. The net effect of this strain is enhancement (10(3)-fold) of the catalytic efficiency in terms of k(cat)/K(m), the more important indicator of the catalytic efficiency at low concentration of the substrate.     

Studying enzyme binding specificity in acetylcholinesterase using a combined molecular dynamics and multiple docking approach

A combined molecular dynamics simulation and multiple ligand docking approach is applied to study the binding specificity of acetylcholinesterase (AChE) with its natural substrate acetylcholine (ACh), a family of substrate analogues, and choline. Calculated docking energies are well correlated to experimental k(cat)/K(M) values, as well as to experimental binding affinities of a related series of TMTFA inhibitors. The "esteratic" and "anionic" subsites are found to act together to achieve substrate binding specificity. We find that the presence of ACh in the active site of AChE not only stabilizes the setup of the catalytic triad but also tightens both subsites to achieve better binding. The docking energy gained from this induced fit is 0.7 kcal/mol for ACh. For the binding of the substrate tailgroup to the anionic subsite, both the size and the positive charge of the tailgroup are important. The removal of the positive charge leads to a weaker binding of 1 kcal/mol loss in docking energy. Substituting each tail methyl group with hydrogen results in both an incremental loss in docking energy and also a decrease in the percentage of structures docked in the active site correctly set up for catalysis.     

A new enzyme model for enantioselective esterases based on molecularly imprinted polymers

An efficient enzyme model exhibiting enantioselective esterase activity was prepared by using molecular imprinting techniques. The enantiomerically pure phosphonic monoesters 4 L and 5 L were synthesized as stable transition-state analogues. They were used as templates connected by stoichiometric noncovalent interactions to two equivalents of the amidinium binding site monomer 1. After polymerization and removal of the template, the polymers were efficient catalysts for the hydrolysis of certain nonactivated amino acid phenylesters (2 L, 2 D, 3 L, 3 D) depending on the template used. Imprinted catalyst IP4 (imprinted with 4 L) enhanced the hydrolysis of the corresponding substrate 2 L by a factor of 325 relative to that of a buffered solution. Relative to a control polymer containing the same functionalities, prepared without template 4 L, the enhancement was still about 80-fold, showing the highest imprinting effect up to now. In cross-selectivity experiments a strong substrate selectivity of higher than three was found despite small differences in the structure of the substrate and template. Plots of initial velocities of the hydrolysis versus substrate concentration showed typical Michaelis-Menten kinetics with saturation behavior. From these curves, the Michaelis constant K(M) and the catalytic constant k(cat) can be calculated. The enantioselectivity shown in these values is most interesting. The ratio of the catalytic efficiency k(cat)/K(M), between the hydrolysis of 2 L- and 2 D-substrate with IP4, is 1.65. This enantioselectivity derives from both selective binding of the substrate (K(M)L/K(M)D=0.82), and from selective formation of the transition state (k(cat)L/k(cat)D=1.36). Thus, these catalysts give good catalysis as well as high imprinting and substrate selectivity. Strong competitive inhibition is caused by the template used in imprinting. This behavior is also quite similar to the behavior of natural enzymes, for which these catalysts are good models.     

A simple DNase model system comprising a dinuclear Zn(II) complex in methanol accelerates the cleavage of a series of methyl aryl phosphate diesters by 10(11)-10(13)

The di-Zn(II) complex of 1,3-bis[ N1, N1'-(1,5,9-triazacyclododecyl)]propane with an associated methoxide ( 3:Zn(II) 2: (-)OCH 3) was prepared and its catalysis of the methanolysis of a series of fourteen methyl aryl phosphate diesters ( 6) was studied at s (s)pH 9.8 in methanol at 25.0 +/- 0.1 degrees C. Plots of k obs vs [ 3:Zn(II) 2: (-)OCH 3] free for all members of 6 show saturation behavior from which K(M) and kcat (max) were determined. The second order rate constants for the catalyzed reactions (kcat (max)/K(M)) for each substrate are larger than the corresponding methoxide catalyzed reaction (k 2 (-OMe)) by 1.4 x 10(8) to 3 x 10 (9)-fold. The values of k cat (max) for all members of 6 are between 4 x 10(11) and 3 x 10(13) times larger than the solution reaction at s (s)pH 9.8, with the largest accelerations being given for substrates where the departing aryloxy unit contains ortho-NO 2 or C(O)OCH 3 groups. Based on the linear Br?nsted plots of k cat (max) vs s (s)pKa of the phenol, beta lg values of -0.57 and -0.34 are determined respectively for the catalyzed methanolysis of "regular" substrates that do not contain the ortho-NO 2 or C(O)OCH 3 groups, and those substrates that do. The data are consistent with a two step mechanism for the catalyzed reaction with rate limiting formation of a catalyst-coordinated phosphorane intermediate, followed by fast loss of the aryloxy leaving group. A detailed energetics calculation indicates that the catalyst binds the transition state comprising [CH 3O (-): 6], giving a hypothetical [ 3:Zn(II) 2:CH 3O (-): 6] complex, by -21.4 to -24.5 kcal/mol, with the strongest binding being for those substrates having the ortho-NO 2 or C(O)OCH 3 groups.     

Formation of catalytic silver nanoparticles supported on branched polyethyleneimine derivatives

A new and straightforward method for screening highly catalytically active silver nanoparticle-polymer composites derived from branched polyethyleneimine (PEI) is reported. The one-step systematic derivatization of the PEI scaffold with alkyl (butyl or octyl) and ethanolic groups led to a structural diversity correlated to the stabilization of silver nanoparticles and catalysis. Analysis of PEI derivative libraries identified a silver nanoparticle-polymer composite that was able to efficiently catalyze the p-nitrophenol reduction by NaBH(4) in water with a rate constant normalized to the surface area of the nanoparticles per unit volume (k(1)) of 0.57 s(-1) m(-2) L. Carried out in the presence of excess NaBH(4), the catalytic reaction was observed to follow pseudo-first-order kinetics and the apparent rate constant was linearly dependent on the total surface area of the silver nanoparticles (Ag-NPs), indicating that catalysis takes place on the surface of the nanoparticles. All reaction kinetics presented induction periods, which were dependent on the concentration of substrates, the total surface of the nanoparticles, and the polymer composition. All data indicated that this induction time is related to the resistance to substrate diffusion through the polymer support. Hydrophobic effects are also assumed to play an important role in the catalysis, through an increase in the local substrate concentration.     

Selective catalysis with peptide dendrimers

Peptide dendrimers incorporating 3,5-diaminobenzoic acid 1 as a branching unit (B) were prepared by solid-phase synthesis of ((Ac-A(3))(2)B-A(2))(2)B-Cys-A(1)-NH(2) followed by disulfide bridge formation. Twenty-one homo- and heterodimeric dendrimers were obtained by permutations of aspartate, histidine, and serine at positions A(1), A(2), and A(3). Two dendrimers catalyzed the hydrolysis of 7-hydroxy-N-methyl-quinolinium esters (2-5), and two other dendrimers catalyzed the hydrolysis of 8-hydroxy-pyrene-1,3,6-trisulfonate esters (10-12). Enzyme-like kinetics was observed in aqueous buffer pH 6.0 with multiple turnover, substrate binding (K(M) = 0.1-0.5 mM), rate acceleration (k(cat)/k(uncat) > 10(3)), and chiral discrimination (E = 2.8 for 2-phenylpropionate ester 5). The role of individual amino acids in catalysis was investigated by amino acid exchanges, highlighting the key role of histidine as a catalytic residue, and the importance of electrostatic and hydrophobic interactions in modulating substrate binding. These experiments demonstrate for the first time selective catalysis in peptide dendrimers.     

A promiscuous glutathione transferase transformed into a selective thiolester hydrolase

Human glutathione transferase A1-1 (hGST A1-1) can be reengineered by rational design into a catalyst for thiolester hydrolysis with a catalytic proficiency of 1.4 x 10(7) M(-1). The thiolester hydrolase, A216H that was obtained by the introduction of a single histidine residue at position 216 catalyzed the hydrolysis of a substrate termed GSB, a thiolester of glutathione and benzoic acid. Here we investigate the substrate requirements of this designed enzyme by screening a thiolester library. We found that only two thiolesters out of 18 were substrates for A216H. The A216H-catalyzed hydrolysis of GS-2 (thiolester of glutathione and naphthalenecarboxylic acid) exhibits a k(cat) of 0.0032 min(-1) and a KM of 41 microM. The previously reported catalysis of GSB has a k(cat) of 0.00078 min(-1) and KM of 5 microM. The k(cat) for A216H-catalyzed hydrolysis of GS-2 is thus 4.1 times higher than for GSB. The catalytic proficiency (k(cat)/KM)/k(uncat) for GS-2 is 3 x 10(6) M(-1). The promiscuous feature of the wt protein towards a range of different substrates has not been conserved in A216H but we have obtained a selective enzyme with high demands on the substrate.     

Steering the enzymatic activity of proteins by ionic liquids. A case study of the enzyme kinetics of yeast alcohol dehydrogenase

We explore ion-specific effects exerted by ionic liquids (ILs) on the enzyme kinetics of yeast alcohol dehydrogenase. The Michaelis-Menten reaction scheme is used to parameterize the observed kinetics in terms of the apparent dissociation constant of the substrate (Michaelis-Menten constant) K(M), the turnover number k(cat), which reflects the number of product molecules per enzyme molecule per second, and the enzymatic efficiency k(cat)/K(M) of the reaction. Results for fifteen salts are used to deduce Hofmeister anion and cation series. The ion rankings derived from K(M), k(cat) and k(cat)/K(M) differ markedly. Only the results for the enzymatic efficiency correspond to expectations from other phenomena, such as the thermal stability of native proteins. Anion variation has a significantly larger effect on the enzymatic efficiency than cation variation. All ILs decrease k(cat) relative to its value for the IL-free solution, thus driving enzyme deactivation. Enhancements of the enzymatic efficiency by some ions are founded in their effects on the Michaelis-Menten constant. The observed Hofmeister anion and cation series point toward hydrophobic interactions as an important factor controlling ion-specific effects on the enzymatic activity.     

Substrate specificity of an active dinuclear Zn(II) catalyst for cleavage of RNA analogues and a dinucleoside

The cleavage of the diribonucleoside UpU (uridylyl-3'-5'-uridine) to form uridine and uridine (2',3')-cyclic phosphate catalyzed by the dinuclear Zn(II) complex of 1,3-bis(1,4,7-triazacyclonon-1-yl)-2-hydroxypropane (Zn(2)(1)(H(2)O)) has been studied at pH 7-10 and 25 degrees C. The kinetic data are consistent with the accumulation of a complex between catalyst and substrate and were analyzed to give values of k(c) (s(-)(1)), K(d) (M), and k(c)/K(d) (M(-)(1) s(-)(1)) for the Zn(2)(1)(H(2)O)-catalyzed reaction. The pH rate profile of values for log k(c)/K(d) for Zn(2)(1)(H(2)O)-catalyzed cleavage of UpU shows the same downward break centered at pH 7.8 as was observed in studies of catalysis of cleavage of 2-hydroxypropyl-4-nitrophenyl phosphate (HpPNP) and uridine-3'-4-nitrophenyl phosphate (UpPNP). At low pH, where the rate acceleration for the catalyzed reaction is largest, the stabilizing interaction between Zn(2)(1)(H(2)O) and the bound transition states is 9.3, 7.2, and 9.6 kcal/mol for the catalyzed reactions of UpU, UpPNP, and HpPNP, respectively. The larger transition-state stabilization for Zn(2)(1)(H(2)O)-catalyzed cleavage of UpU (9.3 kcal/mol) compared with UpPNP (7.2 kcal/mol) provides evidence that the transition state for the former reaction is stabilized by interactions between the catalyst and the C-5'-oxyanion of the basic alkoxy leaving group.     

Proton inventory studies of alpha-thrombin-catalyzed reactions of substrates with selected P and P' sites

Deuterium kinetic solvent isotope effects for the human alpha-thrombin-catalyzed hydrolysis of (1) substrates with selected P(1)-P(3) sites, Z-Pro-Arg-7-amido-4-methylcoumarin (7-AMC), N-t-Boc-Val-Pro-Arg-7-AMC, Bz-Phe-Val-Arg-4-nitroanilide (pNA), and H-D-Phe-L-Pip-Arg-pNA, are (DOD)k(cat) = (2.8-3.3) +/- 0.1 and (DOD)(k(cat)/K(m)) = (0.8-2.1) +/- 0.1 and (2) internally fluorescence-quenched substrates (a) (AB)Val-Phe-Pro-Arg-Ser-Phe-Arg-Leu-Lys(DNP)-Asp-OH, an optimal sequence, and (b) (AB)Val-Ser-Pro-Arg-Ser-Phe-Gln-Lys(DNP)-Asp-OH, recognition sequence for factor VIII, are (DOD)k(cat) = 2.2 +/- 0.2 and (DOD)(k(cat)/K(m)) = (0.8-0.9) +/- 0.1, at the pL (L = H, D) maximum, 8.4-9.0, and (25.0-26.0) +/- 0.1 degrees C. The most plausible models fitting the partial isotope effect (proton inventory) data have been selected on the basis of lowest values of the reduced chi squared and consistency of fractionation factors at all substrate concentrations, assuming rate-determining acylation. The data for Z-Pro-Arg-7-AMC are consistent with a single-proton bridge at the transition state phi(TS) = 0.39 +/- 0.05 and components for solvent reorganization phi(S) = 0.8 +/- 0.1 and phi(S) = 1.22 for k(cat) and k(cat)/K(m), respectively. The data for tripeptide amides fit bowl-shaped curves; an example is N-t-Boc-Val-Pro-Arg-7-AMC: phi(TS)(1) = phi(TS)(2) = 0.57 +/- 0.01 and phi(S) = 1 for k(cat) and 1.6 +/- 0.1 for k(cat)/K(m). Proton inventories for the nonapeptide (2b) are linear. The data for k(cat) for H-D-Phe-L-Pip-Arg-pNA and the decapeptide (2a) are most consistent with two identical fractionation factors for catalytic proton bridging, phi(TS)(1) = phi(TS)(2) = 0.68 +/- 0.02 and a large inverse component (phi(S) = 3.1 +/- 0.5) for the latter, indicative of substantial solvent reorganization upon leaving group departure. Proton inventory curves for k(cat)/K(m) for nearly all substrates are dome-shaped with an inverse isotope effect component (phi(S) = 1.2-2.4) originating from solvent reorganization during association of thrombin with substrate. These large contributions from medium effects are in full accord with the conformational adjustments required for the fulfillment of the dual, hemostatic and thrombolytic, functions of thrombin.     

Hydrolysis of p-nitrophenyl picolinate catalyzed by metal complexes of N-alkyl-3,5-bis(hydroxymethyl)-1,2,4-triazole in CTAB micelles

Two lipophilic ligands containing triazole and hydroxyl groups, N-alkyl(C(n)H(2n+1))-3,5-bis(hydroxymethyl)-1,2,4-triazole (n=10 and 12), were synthesized. Effects of their Cu(II) and Ni(II) complexes on the hydrolysis of p-nitrophenyl picolinate (PNPP) in cetyltrimethylammonium bromide (CTAB) micelles have been investigated kinetically, and some kinetic parameters of the reactions were obtained by employing the ternary complex kinetic model for metallomicellar catalysis. It was found that Cu(II) complexes of these triazole-based ligands showed more effective catalytic activity on the hydrolysis of PNPP than Ni(II) complexes. Also, the apparent first-order rate constants for product formation in the metallomicellar phase (k(N)(')), the association constants between the substrate and the binary complex (K(T)), and the association constants between the metal ion and the ligand (K(M)) increased with an increase in pH value, which may be attributed to an increase in the nucleophilicity of the hydroxyl groups in the ligand or the electrophilicity of the substrate at higher pH. In addition, at constant pH, k(N)(') and K(T) increased with an increase in the hydrocarbon chain length of the ligand, while K(M) decreased.     

Pentavalent Organo-Vanadates as Transition State Analogues for Phosphoryl Transfer Reactions

Pentavalent organo-vanadates have been put forth as transition state analogues for a variety of phosphoryl transfer reactions. In particular, uridine 2',3'-cyclic vanadate (U>v) has been proposed to resemble the transition state during catalysis by ribonuclease A (RNase A). Here, this hypothesis is tested. Lys41 of RNase A is known to donate a hydrogen bond to a nonbridging phosphoryl oxygen in the transition state during catalysis. Site-directed mutagenesis and semisynthesis were used to create enzymes with natural and nonnatural amino acid residues at position 41. These variants differ by 10(5)-fold in their k(cat)/K(m) values for catalysis, but <40-fold in their K(i) values for inhibition of catalysis by U>v. Plots of logK(i) vs log(K(m)/k(cat)) for three distinct substrates [poly(cytidylic acid), uridine 3'-(p-nitrophenyl phosphate), and cytidine 2',3'-cyclic phosphate] have slopes that range from 0.25 and 0.36. These plots would have a slope of unity if U>v were a perfect transition state analogue. Values of K(i) for U>v correlate weakly with the equilibrium dissociation constant for the enzymic complexes with substrate or product, indicating that U>v bears some resemblance to the substrate and product as well as the transition state. Thus, U>v is a transition state analogue for RNase A, but only a marginal one. This finding indicates that a pentavalent organo-vanadate cannot necessarily be the basis for a rigorous analysis of the transition state for a phosphoryl transfer reaction.     

Catalytic and direct oxidation of cysteine by octacyanomolybdate(V)

The oxidation of cysteine by [Mo(CN)(8)](3-) in deoxygenated aqueous solution at a moderate pH is strongly catalyzed by Cu(2+), to the degree that impurity levels of Cu(2+) are sufficient to dominate the reaction. Dipicolinic acid (dipic) is a very effective inhibitor of this catalysis, such that with 1 mM dipic, the direct oxidation can be studied. UV-vis spectra and electrochemistry show that [Mo(CN)(8)](4-) is the Mo-containing product. Cystine and cysteinesulfinate are the predominant cysteine oxidation products. The stoichiometric ratio (Deltan(Mo(V))/Deltan(cysteine)) of 1.4 at pH 10.8 is consistent with this product distribution. At pH 1.5, the reaction is quite slow and yields intractable kinetics. At pH 4.5, the rates are much faster and deviate only slightly from pseudo-first-order behavior. With 2 mM PBN (N-phenyl-tert-butyl nitrone) present at pH 4.5, the reaction rate is about 20% less and shows excellent pseudo-first-order behavior, but the stoichiometric ratio is not significantly changed. The rates also display a significant specific cation effect. In the presence of spin-trap PBN, the kinetics were studied over the pH range 3.48-12.28, with [Na(+)] maintained at 0.09-0.10 M. The rate law is -d[Mo(V)]/dt = k[cysteine](tot)[Mo(V)], with k = {2(k(b)K(a1)K(a2)[H(+)] + k(c)K(a1)K(a2)K(a3))}/([H(+)](3) + K(a1)[H(+)](2) + K(a1)K(a2)[H(+)] + K(a1)K(a2)K(a3)), where K(a1), K(a2), and K(a3) are the successive acid dissociation constants of HSCH(2)CH(NH(3)(+))CO(2)H. Least-squares fitting yields k(b) = (7.1 +/- 0.4) x 10(4) M(-1) s(-1) and k(c) = (2.3 +/-0.2) x 10(4) M(-1) s(-1) at mu = 0.1 M (NaCF(3)SO(3)) and 25 degrees C. A mechanism is inferred in which k(b) and k(c) correspond to electron transfer to Mo(V) from the thiolate forms of anionic and dianionic cysteine.     

Changes in the relative contribution of specific and general base catalysis in cationic micelles. The cyclization of substituted ethyl hydantoates

The rate-surfactant profiles for the HO(-)- and AcO(-)-catalyzed ring closure of two ethyl hydantoates, E2 and E3, to hydantoins with three cetyltrimethylammonium salts (CTAX, X = Br(-), Cl(-), or AcO(-)) are measured in 0.02 and 0.2 M acetate buffers 50% base with starting pH 4.65. Marked accelerations associated with large pH increases are found in 0.02 M buffered CTAOAc. Smaller accelerations and smaller pH changes are observed in 0.2 M buffered CTAOAc and CTACl. From these profiles, the micellar rate constants for the specific base- and general base-catalyzed reactions, and, respectively, of E2 and E3 are obtained separately. The resulting values of k(2,m)/k(w), E2/E3 rate constant ratios, and kinetic solvent isotope effects, KSIEs, are consistent with a strong predominance of the HO(-) reaction in the dilute buffer, while in the more concentrated buffer, specific and general catalysis compete for the two substrates. This result is in sharp contrast with that observed in water in which the reaction of E2 is almost exclusively specifically catalyzed. The increase in the general base-catalyzed pathway for E2 is attributed not to an increase in the rate constant for this pathway in micelles but to a smaller decrease than that for the specific catalysis (k(2,m)/k(w) = 0.2 and 0.4 for the specific and general catalysis, respectively). The different responses of the rate constants to the micellar media are interpreted as a larger effect of the interfacial polarity on the specific than on the general catalysis. The apparent contradiction between the rate constant decreases and the marked accelerations in micellar media is discussed in terms of pH changes, i.e., [HO(-)] changes, and of acetate inclusion via ion exchanges at micellar interfaces.     

The effect of mutation on RNA Diels-Alderases

Chemical mutagenesis of a previously reported RNA Diels-Alderase (DA22) was followed by in vitro selection based on [4 + 2] catalysis. New mutated families of RNA Diels-Alderases closely related in sequence space were obtained. The mutated Diels-Alderases selected showed significant improvements in catalytic efficiency (k(cat)/K(m)) as compared to the original DA22. The improvement in catalytic activity was primarily due to a decrease in K(m), but modest increases in k(cat) were also observed. The increase in catalytic activity of these new Diels-Alderases was found not to negatively affect their dienophile specificity. Surprisingly, one of the most active Diels-Alderases (DAM 40), a subtle sequence mutant of DA22, was found to show a new metal dependence and could function with Ni(2+) as the only transition-metal ion. Truncation experiments of DA22 showed that the region shown to be hypervariable at the 3'-end of the structure could be deleted without a significant decrease in the relative rate of Diels-Alder catalysis.