Synthesis and characterization of a novel controlled release nitrogen-phosphorus fertilizer hybrid nanocomposite based on banana peel cellulose and layered double hydroxides nanosheets

In the present study, a novel environment-friendly hybrid nanocomposite of Banana Peel Cellulose-g-poly(acrylic acid)/PVA (BPC-g-PAA/PVA) hydrogel and Layered double hydroxides (LDH) nanosheets was developed using in situ graft polymerization for slow release of NP (nitrogen, phosphorous) fertilizers and water retention. The hybrid nanocomposite hydrogel containing NP fertilizers was characterized using FTIR, and SEM. The effects of pH changes and different saline solutions on the swelling behavior, fertilizer release and water retention properties of the nanocomposite were investigated.The nanocomposite hydrogel showed a pH dependent swelling, as in the pH range of 7–10, the hydrogel had higher water absorbency. However, pH had opposite effects on the release of fertilizers. Phosphorus release had an increasing trend from pH 2 to 7 and it reached its maximum value at normal pH while nitrogen had a higher release rate at acidic pH and by increasing pH from 2 to 7, the release of nitrogen decreased gradually. Water absorption and fertilizer release of hydrogel was influenced by different cations in the order of Ca²⁺ < K⁺ < Na⁺. Water retention study in loamy sand soil showed that the nanocomposite hydrogel significantly improved the water retention of the soil for a longer period of time, compared to neat BPC-gPAA. This result indicated that incorporation of LDH nanosheets in hydrogel matrix improved its water retention property. The obtained results revealed that the nanocomposite of BPC-g-PAA/PVA hydrogel and LDH nanosheets can be a promising controlled release fertilizer formulation with enhanced water retention properties for agricultural applications.     

Synthesis and characterization of novel hybrid compounds containing coumarin and benzodiazepine rings based on dye

Coumarin derivatives, one of the organic fluorescent materials, are widely applied in many areas such as laser dyes, organic light emitting diodes (OLED), pharmaceuticals and bio/chemosensors, with the advantages of the large conjugated system and planar structure. In the coumarin analogs, which are polarity sensitive fluorophores, a shift to the red zone is observed in the case of π expansion at 3-positions and electron donor groups at 7-positions. The present article reports the synthesis of novel hybrid compounds ( CD1-CD8 ) containing coumarin and benzodiazepine rings using ethyl 3-(7-(diethylamino)-2-oxo-2H-chromen-3-yl)-3-oxopropanoate reagent and 1,2-diaminobenzene derivatives under optimized reaction conditions with PTSA catalyst. The structures of target compounds synthesized were characterized by FTIR, ¹HNMR, ¹³CNMR, HRMS and UV–Vis spectra. The effects of electron withdrawing and electron donor groups in the cyclocondensation reaction that takes place as regioselective were evaluated in detail. The substituent effects were investigated for n-π* and π-π* electronic transitions in UV–Vis Spectroscopy.     

RETRACTED ARTICLE: Microenvironment characterization for a novel biocompatible hybrid carbon-silicon material

The compatible carbon-silicon complex materials originated from precursor diglycerylsilane (DGS) and sugar-modified silane N-(3-triethoxysilylpropyl)gluconamide (GLS) have gained substantial popularity by demonstrating admirable properties to stabilize entrapped biomolecules. The microenvironment inside these materials, especially the distribution of sugar moieties inside the matrix, which is likely the most critical factor determining compatibility of these materials, still remains unclear. To deeply investigate the biocompatibility mechanism of these materials, we have adopted two different preparation routes for these materials by introducing GLS into the starting DGS sol stage, but things are different after the DGS gel is formed. A fluorescence probe rhodamine 6G is introduced herein in the DGS sol to monitor the distribution of GLS moieties, as well as the evolution of the microenvironment inside resulting materials. All in all, the findings demonstrated that the timing of GLS addition plays a critical role in controlling the evolution of the inner structure of materials, suggesting that this factor provides a promising route to tune the properties of the resulting materials. Supported by the National Natural Science Foundation of China (Grant No. 20876176), Scientific Research Foundation for the Returned Overseas Chinese Scholars by the State Education Ministry, Key Project of Chinese Ministry of Education (Grant No. 109100), Doctoral Project of Shandong Province (Grant No. 2008BS09013), Research Foundation of Key Laboratory of Carbon Materials, Institute of Coal Chemistry, CAS (Grant No. KFJJ0506), and Natural Science Foundation of Shandong Province (Grant No. Q2007B02)     

Synthesis and characterization of a novel non-linear optical (NLO) material

Anthracene is one of the organic molecular crystals, which exhibits peculiar optical and electronic properties. Since the 9, 10 positions are very reactive in anthracene, it undergoes the Diel’s–Alder reaction with maleic anhydride in 99% yield. The synthesis of Diel’s–Alder adduct has been carried out by adopting standard procedure. The product was subjected to various characterization studies such as FTIR, UV and ¹H NMR spectroscopy, and thermal studies to check its purity and determine the applicability of adduct in various applications. The second harmonic generation (SHG) efficiency of the adduct has been observed using Nd:YAG laser.     

Synthesis and characterization of a hybrid material from self-assembling colloidal particles and carbon nanotubes

The work describes the synthesis of a hybrid material starting from surface-modified colloidal particles of styrene (ST)-acrylic acid (AA) copolymer and carbon nanotubes (CNTs). Vinyl double bonds have been chemically grafted on the surface of the ST-AA copolymer particles in order to be able to copolymerize with acrylamide (AM). The hybrid material was obtained by reaction between the free radicals resulted from both copolymerization and AM homopolymerization and the superficial groups of modified CNTs. Due to the difference between the diameter of the polymer particles and the one of the CNTs, a change in the CNTs shape is to be expected (disentanglement due to steric effects). The products thus obtained have been characterized using IR, SEM, XPS, Raman, and AFM techniques.     

Retraction Note to: Microenvironment characterization for a novel biocompatible hybrid carbon-silicon material

<正>Retraction to:Science in China Series B:Chemistry,2009,52:1120-1127doi:10.1007/s11426-009-0149-1This article has been retracted at the request of the authors because major parts of the work were previously published in     

Synthesis and characterization of a novel electroluminescent polymer based on a phenoxazine derivative

We report the preparation of a new electroluminescent polymer by the oxidative coupling copolymerization of N‐(4‐n‐butylphenyl)phenoxazine and 9,9‐di‐n‐butylfluorene with ferric(III) chloride. The reaction yields soluble polymers with a weight‐average molecular weight as high as 9000. The reactivity has been studied with respect to the reaction time, temperature, and feed ratio of the comonomers. Under optimum conditions, a copolymer with a 50% comonomer incorporation ratio can be obtained in a 75% yield. The polymers have been characterized with differential scanning calorimetry, cyclic voltammetry, and optical spectroscopy. A simple single‐layer light‐emitting‐diode device of an indium tin oxide/polymer/Mg–Ag structure shows a luminance of 200 cd/m² at an 18‐V operating voltage. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4338–4345, 2006     

Synthesis and characterization of a new porphyrin-polyoxometalate hybrid material and investigation of its catalytic activity

In the present work, the preparation of a new organic-inorganic hybrid material in which tetrakis(p-aminophenylporphyrin) is covalently linked to a Lindqvist structure of polyoxometalate, is reported. This new porphyrin-polyoxometalate hybrid material was characterized by (1)H NMR, FT-IR and UV-Vis spectroscopic methods and cyclic voltammetry. These spectro- and electrochemical studies provided spectral data of the synthesis of this compound. Cyclic voltammetry showed the influence of the porphyrin on the redox process of the polyoxometalate. The catalytic activity of this hybrid material was investigated in the alkene epoxidation with NaIO(4).     

Synthesis, characterization and photophysical properties of a SWNT-phthalocyanine hybrid

We report the synthesis, characterization and photophysical features of a new nanometer scale carbon nanostructure, that is, a single-wall carbon nanotube bearing phthalocyanine chromophores.     

Synthesis, characterization and thermal properties of novel PMDA-PAPD/silica hybrid network polymers

Novel PMDA-PAPD/silica hybrid polymers were synthesized by the sol-gel process. Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids, (condensed siloxane bonds designated as Q¹, Q², Q³, Q⁴, wth 3-aminopropyltriethoxysilane having mono-, di-, tri-, tetra-substituted siloxane bonds is designated as T¹, T² and T³). The results revealed that Q³, Q⁴ and T³ are the major microstructure elements in forming a network structure. The surface morphology, particle size, crystallinity and the thermal stability of the hybrids were investigated using Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). SEM and TEM revealed that the hybrids were nanocomposites. The XRD indicated that covalent bonding (Si-O-Si) between the organic and inorganic components enhanced miscibility. DSC and TGA results showed that these hybrid materials had excellent thermal stability. The heat capacities of some materials were reported for the temperature range 273 K and 363 K as no thermal anomaly was found in this temperature range.     

Preparation, characterization, and controlled release of novel nanoparticles based on MMA/beta-CD copolymers

A series of random copolymers with different beta-cyclodextrin contents were synthesized by radical copolymerization of MMA with a monovinyl beta-CD monomer. The copolymers were characterized with IR spectroscopy, elemental analysis, DSC, and TGA. Based on these copolymers, their nanoparticles were prepared by using DMF, water, and acetone as solvents. Aqueous dispersions of the nanoparticles were further obtained by dialysis against water. Zetasizer Nano-ZS dynamic light scattering and transmission electron microscopy were employed to characterize the nanoparticles. Using camptothecin as a model drug molecule, the encapsulation efficiency and release behavior of the nanoparticles were investigated.     

Synthesis and characterization of novel polyimides based on thiazole-containing diamine

A new kind of aromatic diamine monomer containing thiazole unit,2-amino-5-(4-aminophenyl)-thiazole (AAPT),was synthesized in three steps,starting from 4-nitroacetophenone.A novel thiazole-containing polyimide was prepared via the polycondensation of AAPT with 6FDA by one-step method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

Synthesis, characterization and electrochemical behavior of the vanadium pentoxide/cetyl pyridinium chloride hybrid material

In situ and ex situ studies concerning the new hybrid material vanadium pentoxide xerogel in the presence of the cationic surfactant cetyl pyridinium chloride (V₂O₅/CPC) are presented. The in situ characterization studies revealed the presence of a lamellar structure for the V₂O₅/CPC hybrid material. The intercalation reaction was evidenced on the basis of the increase in the d-spacing as well as the displacement of the infrared bands toward lower energy levels. Electrochemical studies comprising the cyclic voltammetry and the electrochemical impedance spectroscopy techniques showed that the behavior of the hybrid material is considerably influenced by the electrolyte composition. The ion insertion/de-insertion into the V₂O₅ xerogel structure accompanying the charge transfer process is influenced by the solid-state diffusion process modeled by using the finite-space Warburg element.     

Synthesis and characterization of a thermoresponsive polyoxometalate-polymer hybrid

We report the synthesis of the first organo-POM with thermoresponsive properties. Our concept will provide chemists with a new tool to design POMs whose solubility is reversibly controllable through an external stimulus. POM-polymer TBA(7)[POM]-poly(N,N-diethylacrylamide) (POM-PDEAAm), was prepared by grafting PDEAAm-NH(2) (obtained by RAFT polymerization) onto the activated Dawson acyl-POM, α(2)-[P(2)W(17)O(61)SnCH(2)CH(2)C(=O)](6-). Extensive MS analysis was used to monitor the chain-functionalization steps and to confirm the formation of the hybrid. Aqueous solutions of the (NH(4))(7)[POM-PDEAAm] exhibited a LCST of 38 °C. Thus, the solubility/aggregation of the hybrid was reversibly controlled by changing the temperature. Above 38 °C, the solution became cloudy, and cleared again upon cooling. Dynamic light scattering (DLS) revealed the formation of small aggregates in the range 100 nm. We assumed that the charged POM head units prevented the formation of the larger-scattering aggregates that are usually observed for PDEAAm, and promoted the formation of micelle-like structures. The conjugate exhibited a temperature transition, which was different from that of the polymer and depended on the counterions associated with the POM. This result demonstrates the potential for merging organic (in this case, polymer) and inorganic structures to afford materials that exhibit new properties.     

Synthesis, characterization, and photochromic properties of hybrid organic-inorganic materials based on molybdate, DABCO, and piperazine

Prompted by our interest in new photochromic organic-inorganic hybrid materials, the reactivity of [Mo7O24]6- toward a structure-directing reagent diamine such as 1,4-diazabicyclo[2.2.2]octane (DABCO) and piperazine (pipz) has been investigated, and three new molybdenum(VI)-containing compounds, namely, (H2DABCO)3[Mo7O24].4H2O (1), (H2DABCO)[Mo3O10].H2O (2), and (H2DABCO)2(NH4)2[Mo8O27].4H2O (3), have been synthesized and characterized. New synthetic routes to achieve the known compounds (H2DABCO)2(H2pipz)[Mo8O27] (4), (H2pipz)3[Mo8O27] (5), and (H2DABCO)2[Mo8O26].4H2O (6) are also reported. All of these compounds contain different poly(oxomolybdate) clusters, i.e., discrete [Mo7O24]6- blocks in 1, infinite polymeric chains 1/infinity[Mo3O10]2- in 2, 1/infinity[Mo8O27]6- in 3-5, and 1/infinity[Mo8O26]4- in 6, associated in a tridimensional assembly by hydrogen bonds with H2DABCO2+ and/or H2pipz2+ cations. Interconversion pathways and chemical factors affecting the stabilization of the different species are highlighted and discussed. At the opposite of 6, compounds 1-5 show photochromic behavior under UV excitation. Namely, compounds 1-5 shift from white or pale yellow to pale pink, reddish brown, or purple under UV illumination depending on the chemical nature of the mineral framework, with the kinetics of the color change being dictated by the nature of the organic component and by the organic-inorganic interface.     

Synthesis,characterization and complexation studies of bis-oxy biphenyl based novel diamides

A series of bis-oxy biphenyl based diamides have been synthesized and characterized from spectral and XRD data. All the diamides form charge-transfer (CT) complex with 7,7,8,8-tetracyanoquinodimethane (TCNQ).     

Synthesis and characterization of novel polyurethanes,polypyridazine, and polyamide based on s-1,2,4,5-tetrazine

The synthesis and analysis of new polymeric materials based on 1,2,4,5-tetrazine are discussed in this study. Tetrazine was mixed with thermoplastic polyurethane in dimethylformamide (DMF) as solvent and dibutyl tin dilaurate as catalyst at 50°C for 24 h to create brush polyurethane-urea, which was then reacted with an unsaturated center in dimethyl sulfoxide as solvent at 60°C for 48 h made of either polyenol or thermoplastic polyurethane through π–π interaction. Because 1,2,4,5-tetrazine (red color) is known to act as an electron-deficient dine in inverse electron demand Diels–Alder reactions and can be easily converted to pyridazine (peach color) via [4 + 2] cycloaddition with suitable followed by expulsion of molecular nitrogen (cycloreversion), we observed a highly colored red shift to peach and this monitor for this reaction. Additionally, polyamide was prepared via reaction of 3,6-diamino-1,2,4,5-tetrazine with terephthaloyl chloride in DMF as a suitable solvent and triethylamine as basic catalyst at 0°C for 3 h and then 36 h at room temperature. The new polymers that were produced were elucidated by spectral data.     

Synthesis and characterization of a novel main chain oxadiazole-based copolymer for n-type solar cell material

A novel oxadiazole-based copolymer has been successfully synthesized through the palladium-catalyzed cross-coupling polycondensation method.The copolymer P is soluble in common organic solvents.Its structure has characterized by ~1H NMR,~(13)C NMR,gel permeation chromatagraphy (GPC),UV-vis absorbance (Abs) and photoluniminescence (PL) spectroscopy,and cyclic voltammetry (CV).Investigation of its optical properties revealed that it is yellow emitting material,and the electrochemical analysis showed that P was well suited poly (2,5-dioctyloxy-p-phenylenevinylene) (PDOCPV) for photovoltaic devices,so the copolymer P is able to act as an electron acceptor in combination with PDOCPV as the electron donor to quench photoluminescence of the copolymer in the blend,indicative of the efficient photoinduced electron transfer from the PDOCPV to the P.     

Synthesis and characterization of polyimides based on novel isomeric perfluorinated naphthylenediamines

Novel highly fluorinated polyimides containing hexafluoronaphthylene fragment in the main chain were prepared by the two-stage polymerization of 2,7- and 2,6-diaminohexafluoronaphthalenes with 4,4′-oxydiphthalic anhydride: polycondensation in a solution at 80 °C followed by high-temperature solid-state chain extension. The influence of hexafluoronaphthylene fragment isomerism on the key polyimide features - molecular weight, thermal stability, solubility, optical properties - was characterized. Polyimides based on 2,7-diaminohexafluoronaphthalene or easily accessible mixture of isomeric diamines formed the flexible, transparent, and thermostable films.     

Synthesis, characterization and properties of a novel fluorinated polyurethane

A novel fluorinated polyurethane (FPU) was prepared by fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TDI) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. Fourier transform infrared spectroscopy (FTIR), ¹H NMR, ¹³C NMR and gel permeation chromatography (GPC) were used to characterize the structure of the fluorinated polyurethane. The thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by thermogravimetric analysis (TGA). X-ray photoelectron spectroscopy (XPS) analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. And the mechanical properties of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were also measured. Chemical resistance of polyurethane films was estimated through spot tests with different solvents. The results showed that FPU had high thermal stability, strain-hardening property and good chemical resistance. The XPS measurements showed the fluorine enrichment on the surface of FPU.