Carbohydrate pyrolysis mechanisms from isotopic labeling: Part 1: The pyrolysis of glycerin: Discovery of competing fragmentation mechanisms affording acetaldehyde and formaldehyde and the implications for carbohydrate pyrolysis

The flash pyrolysis of glycerin was investigated by the use of isotopic labeling with ¹³C, in conjunction with GC/MS analysis of the products. The formation of acetaldehyde and acrolein was shown to occur by unimolecular reaction. Acetaldehyde was found to be produced by at least two competing mechanisms. Mechanism “A” delivered C-2 of glycerin to the carbonyl group of acetaldehyde, whereas mechanism “B” delivered C-2 of glycerin to the methyl group of acetaldehyde. Formaldehyde was exclusively derived from C-1 or C-3 by either mechanism. The partition between the two mechanistic paths was found to be influenced by the presence of potassium salts and acids, but not by the presence of benzoyl peroxide or galvanoxyl. Mechanism “A” is postulated to be a concerted cyclic version of the Grob Fragmentation, proceeding through an intermediate which is hydrogen-bonded between the 1- and 3-hydroxyl groups to simultaneously generate enol-acetaldehyde, formaldehyde and H₂O. Mechanism “B” as favored by the presence of alkali is postulated to involve hydrogen-bonding between adjacent hydroxyl groups and to be an alkaline version of the pinacol rearrangement followed by retro-aldol fragmentation of the intermediary 3-oxopropoxide anion. These mechanistic classes are both fundamentally important, not only for their effect on glycerin, but for being able to provide numerous means of initial pyrolytic carbon–carbon bond breakage along carbohydrate carbon-chains, given the numerous 1,2,3-triol interactions that are possible. Further nomenclature is introduced to refine the distinctions among isotopomers and isotopologs (ipsomer, ipsolog, naturalomer, “nominal” isotopolog, ubiquilog), as extensions of a concept previously adopted by IUPAC.     

Kosmotrope character of maltose in water mixtures

It is well known that water plays a fundamental role for living beings, because the nature of water transformations provides for the ability to preserve biostructures. Solute can be classified as “kosmotropes” or “chaotropes” depending on the interaction strength with water. In the case of solutes destroying the natural hydrogen bonded network of water, called “kosmotropes” or “structure-makers”, the denaturation processes can be inhibited.

The aim of this work is to investigate the vibrational behaviour of maltose/H₂O mixtures in order to characterise the changes induced by the sugar on the H₂O hydrogen-bonded network. The obtained findings point out that maltose has a destructuring effect on the water tetrahedral network and emphasise its kosmotrope character.     

Zur nomenklatur der phane—II

The new term “Phanes” has been clearly defined and a nomenclature system tentatively developed. This system is comprehensible and of general application and at the same time relatively simple. The notations “nucleus”, “bridge”, “number of bridge members” and “number of ring members” are defined. In order to get a definite characterisation of the phanes which contain a carbocyclic nucleus, a carbocyclic and heterocyclic bridge the following terms: “carbophanes”, “carba-phanes” and “hetera-phanes” have been newly introduced. The prefix “hetera-” has been proposed as a general expression and as a representative term for the syllables “aza-”, “oxa-”, “thia-” and so on. The so called “a-nomenclature” is clearly called “hetera-nomenclature”. The new expressions “heteralogous” and “substitulogous” are explained. As the various examples will show, the “Phane-Nomenclature” can also be applied to the naming of complicated metallocenophanes.     

The dimers of cyanamide

Ab initio calculations have been performed on various dimeric forms of cyanamide. The “nondissociative” dimerization of cyanamide leads to cyclic molecules all of which are unstable with respect to cyanamide. However, the molecules produced by “dissociative” dimerization are stable relative to cyanamide. Dicyandiamide is found to be the most stable of nine dimeric configurations.     

Conventional and unconventional infrared spectrometry and their quantitative interpretation

In condensed matter, optical properties can be described by a dielectric function (DF), and the structures observed in spectra are then related to the poles and zeros of the DF. As an example, model functions are calculated by a fit to measured spectroscopic data for polystyrene and silica. The first material shows weak, narrow bands and the latter strong, broad bands and a negative real part of the DF.Based on these model DFs, spectra are simulated which are expected to be obtained by “conventional” methods such as transmittance or reflectance measurements, or by “unconventional” methods such as reflectance at oblique incidence, diffuse reflectance, photoacoustic spectroscopy and attenuated total reflectance. A variety of simulated, typical spectra are plotted as a small “atlas”. Conditions are discussed that allow a straightforward procedure for interpreting the spectra quantitatively, i.e., the evaluation of the resonance frequency and the concentration of the oscillators under consideration.It is shown that for systems characterized by weak, narrow oscillator lines, mostly an intuitive interpretation is possible, looking only at the position and strength of “lines” in the spectra. Materials showing strong polar vibrations, however, require more sophisticated procedures for interpreting the spectra.     

Intermolecular vibrational energy transfer of highly excited CF3I molecules observed from transient UV absorption spectra

Intermolecular vibrational energy transfer of highly excited CF₃I molecules by probing of the UV absorption band has been studied. The value of the rate constant of V---V exchange between ensembles of “hot” and “cold” molecules has been found to be 2 ± 0.4 μs⁻¹ Torr⁻¹. Consideration has been given to the effect of this process on isotopic selectivity loss in isotope separation by the method of successive IR-UV molecular photodissociation.     

Diffuse reflectance spectroscopy of powders

Diffuse reflectance (DRIFT) spectra in the mid-IR region, especially of inorganic powders, often reveal inverted or derivative-like structures (“reststrahlen” bands) which make their straightforward interpretation in terms of the Kubelka-Munk theory difficult. A simulation technique based on a combination of single scattering (Mie theory) and radiative transfer (with Kubelka-Munk as a special case) is reported that allows measured DRIFT spectra to be described without use of any free “fit” parameters. The results for silica glass microspheres and silicon carbide powder show that not specular reflectance but prominent structures in the single particle scattering cross-section are responsible for the reststrahlen features which cannot be suppressed even by diluting the powder in an excess of KBr. The efficiency of a “blocker” device in DRIFTS is also discussed.     

Nanogram detection of m-dinitroaromatics and their derivatives A re-evaluation of the spot-test based on the janovsky reaction

The spot-test for m-dinitroaromatics and their derivatives, based on the Janovsky reaction, is re-investigated. The sensitivity of the spot-test has been much enhanced by changing the solvent and using the novel “pellet” spot-test. With the “pellet” spot-test and dimethylsulphoxide, 4–50 ng of m-dinitroaromatic compounds and their derivatives can be detected. The change from acetone (used in the original spot-test) to dimethylsulphoxide changes the reaction product in most cases.     

The influence of a self-assembled monolayer on the activity of rough gold for glucose oxidation

Gold surface has been roughened by amalgamation and tested for self-assembled monolayer (SAM) formation and glucose oxidation. The rough gold undergoes structural changes at elevated temperatures, which lead to loss of activity for glucose oxidation and lower affinity for the self-assembly. The transformation of “active” into “inactive” surface can be prevented by SAM formation. The SAM modified gold exhibits high activity for glucose oxidation. These results are important especially for those studies, which use rough gold modified by SAM for enzyme immobilisation and further glucose oxidation, since the gold activity itself was so far neglected.     

Supramolecular edifices and switches based on metals

Our studies allowed to unravel at least partially, the “so-called” spontaneous self-assembly processes of supramolecular edifices based on metals. The formation of a tricuprous double-stranded helix in solution was found to be driven by thermodynamics via highly distorted intermediates. Dinuclear europium(III) triple-stranded helices were built in solution via alternative “braiding” and “keystone” mechanism. The overall process was also dominated by thermodynamics. Moreover, multipodal ligand with the appropriate binding sites can operate as Cu(II)/Cu(I) molecular switches. Recently, we examined ligands with neighboring binding functionalities (N,N) and (N,O) which confer to the corresponding divalent metal complexes new properties. They could operate as proton-driven multistage molecular switching devices based on region-selective metal binding.     

The cathodic cleavage of aromatic sulphonamides: an elegant way to produce amino radicals themselves fully characterized by means of the spin marking technique

Sulphonamides may lead, in the course of their cathodic cleavage, to intermediate amino radicals. These radicals may be reduced or trapped rapidly by nitrones added “ in situ ”. The method allows (by means of ESR spectral analysis) elements for establishing cleavage mechanisms to be obtained.     

Optical potential theory of diatom-diatom scattering. II. Indistinguishable molecules

The theory of vibro-rotational energy exchange in “indistinguishable” diatom-diatom scattering is formulated in terms of effective potentials. Due the necessity of considering both “symmetric” and “antisymmetric” molecular two-particle states, the formalism has a characteristic (two-by-two matrix structure. A mathematical generalization of Schwinger's theory of sources allows a compact derivation of exact and approximate expressions for t “optical” and “transition” potentials of elastic and inelastic processes, respectively. Finally, considerations based on a partial wave analysi of the working equations, suggest that the present theory should be more readily amenable to numerical implementations than the close coupling approach     

“In situ” radiation cleaning of underground water contaminated with cyanides - six years of experience

The locality of underground water, contaminated with cyanides, has been successfully cleaned by using the hydraulic barrier method (assembly of pumped wells) since 1986. The average cyanide concentrations in the outflow exceeded 35 m per litre. Contamination had to be eliminated before the discharge into the sewer system. The radiation approach “in situ” i.e. decomposition of cyanides by barrier, was applied and is still being used today. The cyanide concentration was lowered more than one order of magnitude. This process was approved by the Czechoslovak radiation security authorities and further applications of “in Situ” regeneration of underground water contamination is anticipated.     

Distribution of 201Tl in the blood

Thallium-201 distribution in the blood was investigated both in vivo and in vitro. Thallium-201 was distributed into the erythrocytes and plasma with the ratio of 1.4 +/- 0.3 to 1.0, immediately after its administration. The uptake of 201Tl into the erythrocytes in vitro were affected by the incubation temperature and the presence of ouabain and KCl; indicating that the 201Tl was uptaken into cells partly through their membranes Na, K-ATPase. Erythrocytes could retain 201Tl in it, whereas 201Tl was present as free ion in the plasma. Thallium-201 was flew out of erythrocytes into the plasma, keeping the ratio of 201Tl in erythrocytes/plasma to be 1.9 +/- 0.2/1.0.     

Rheological properties of deionized Chinese ink

Rheological properties for Chinese ink in exhaustively deionized aqueous media were carefully examined. In the steady shear measurement, the shear viscosities of the ink could be well explained by considering the “effective” volume fraction of the particles in the ink including the electrical double layers and by using Einstein's equation for dilute suspension viscosity, when the particle volume fraction was substantially low. In the case that the volume fraction was higher, the shear viscosities showed extremely higher than those from Einstein's prediction, though the ink remained a Newtonian liquid. In the stress-strain measurement, the shear moduli were observed at strain smaller than 0.2. The “weak” aggregation among the particles in the ink under no shear or low shear rates was supported. It should be noted that the glue in the suspension plays an important role for the good liquidity of the ink and for the “weak” bridges among the particles resulting its good dispersion stability.     

Semiempirical molecular orbital studies on p-quinodimethane. Electronic structure assignments based on total energies and comparisons with photoelectron and absorption spectra

The electronic structure of p-quinodimethane has been investigated using both CNDO/S and INDO molecular orbital approximations. It is found that the energetically favorable configuration is a “quinoid” construction leading to a spin-paired singlet ground state. Comparisons of the calculated excitation energies and orbital orderings with optical and photoemission measurements are consistent with this assignment. The “quinoid” configuration is found to be energetically unfavorable toward the formation of a low-lying triplet or “biradical”-like state. Charge density distributions, however, suggest a high ground state chemical reactivity.     

Investigation of the interactions between ginsenosides and amino acids by mass spectrometry and theoretical chemistry

In order to evaluate the essence of the interactions of ginsenosides and proteins which are composed by α-amino acids, electrospray ionization mass spectrometry was employed to study the noncovalent interactions between ginsenosides (Rb₂, Rb₃, Re, Rg₁ and Rh₁) and 18 kinds of α-amino acids (Asp, Glu, Asn, Phe, Gln, Thr, Ser, Met, Trp, Val, Gly, Ile, Ala, Leu, Pro, His, Lys and Arg). The 1:1 and 2:1 noncovalent complexes of ginsenosides and amino acids were observed in the mass spectra. The dissociation constants for the noncovalent complexes were directly calculated based on peak intensities of ginsenosides and the noncovalent complexes in the mass spectra. Based on the dissociation constants, it can be concluded that the acidic and the basic amino acids, Asp, Glu, Lys and Arg, bound to ginsenosides more strongly than other amino acids. The experimental results were verified by theoretical calculations of parameters of noncovalent interaction between ginsenoside Re and Arg which served as a representative example. Two kinds of binding forms, “head–tail” (“H–T”) and “head–head” (“H–H”), were proposed to explain the interaction between ginsenosides and amino acids. And the interaction in “H–T” form was stronger than that in “H–H” form.     

Amine groups functionalized gel-type resin supported Pd catalysts: Physicochemical and catalytic properties in hydrogenation of alkynes

Palladium catalysts (0.125–0.5 wt.% Pd) supported by amine groups—functionalized gel-type resin (FCN) were studied in the hydrogenation of alkynes reagents, 2-butyne-1,4-diol and phenylacetylene. The catalysts were prepared by two routes. The first, “OAc” is based on the immobilization of Pd-precursor in the pre-swollen resin from THF solution of Pd(OAc)₂, followed by chemical reduction of the Pd-centers. This method produces Pd particles of size in nano-scale. The second procedure, “aq” implies the deposition of Pd-species on dry resin beads using aqueous solution of PdCl₂. Reduction of these Pd-species gives relatively large Pd particles, dominating are 30–50 nm in size. The SEM studies performed over the cross-section of catalysts grains showed location of Pd in outer shell of polymer beads in both “OAc” and “aq” catalysts; however, thinner layer of Pd appears in “aq” series catalysts. In the presence of all catalysts, prepared by “OAc” and “aq” methods the selectivity towards alkenes is high, above 90%. The catalysts of “aq’ series are much more active and more selective than “OAc” analogues giving selectivity to alkene ca. 94% at almost complete conversion of alkynes. Moreover, catalytic performance of “aq’ series catalyst is unchanged under recycling use. The catalyst was recovered and reused 4 times, maintaining its catalytic efficiency.     

Are pore size distributions in microfiltration membranes measurable by two-phase flow porosimetry?

The issue of evaluating equivalent pore diameter distributions in membrane microfilters from gas-liquid (g-l) porosimetry data has been critically examined. Experiments performed with one isotropic and one composite anisotropic membrane in both possible orientations revealed conspicous dependence of the obtained (g-l) porosimetry peaks on imposed pressure ramp rates, p. Interference of this kinetic effect can be eliminated from the measured data by extrapolation to p = 0. The ramp rate effect is most likely caused by tortuous pore length distribution, and relatively long times required for liquid expulsion. For two experiments, the observed effects of p could be reconciled with predictions of the Schlesinger-Bechhold theory [Bechold et al., Kolloid Z., 55 (1931) 172–198]. The data obtained with the thin top layer of the composite membrane facing intruding air directly did deviate somewhat from the theory. Pores characterized by (g-l) porosimetry are likely of the “throat type”, and their size distribution is considerably more narrow than that obtained for the “node-type” pores by SEM-image analysis [Zeman and Denault, J. Membrane Sci., 71 (1992) 221–231]. A single bivariate distribution function was constructed for these two distinct pore populations. Flow-weighted or number fraction distributions can be calculated from the extrapolated porosimetry data. For narrow ranges of “throat” diameters, these distributions are fairly similar.     

Spectres de rotation de la molécule de chlorobenzéne : I. Variétés isotopiques monosubstituées et structure rs

The microwave spectra of chlorobenzene “(1)-³⁵Cl”, all eight mono-[“(1)-³⁷Cl”, “(1)-³⁵Cl, (2)D”, “(1)-³⁵Cl, (3)D”, “(1)-³⁵Cl, (4)D”, “(1)-³⁵Cl, (1)-¹³C”, “(1)-³⁵Cl, (2)-¹³C”, “(1)-³⁵Cl, (3)-¹³C”, “(1)-³⁵Cl, (4)-¹³C”], one di[“(1)-³⁵Cl, (2,6)D₂,”] and one trisubstituted species [“(1)-³⁷Cl, (2,6)D₂”] have been investigated. From the moments of inertia of the vibrational ground state the r_s structure was derived. The reliability of the two small a coordinates could be enhanced through use of the multiply substituted species. The errors of the moments of inertia were propagated to the structural parameters. It could be shown that the benzene ring is deformed. However the quantitative deformation could not be established due to the rather large errors of some structural parameters.