STEREOSELECTIVE SYNTHESIS OF MONOFLUORO-OLEFINS FROM DIISOPROPYL (CARBOETHOXYFLUORO-METHYL)PHOSPHONATE

Abstract

Treatment of ethyl oxalyl chloride or methyl oxalyl chloride with lithium diisopropyl(carboethoxyfluoromethyl)phosphonate[(i-PrO)₂P(O)CFCO₂Et]^?Li⁺ 2 followed by in siru nucle-ophilic addition with methylmagnesium iodide or vinyl magnesium bromide affords with exclusive E-stereoselectivity formation of diethyl-2-fluoro-3-methyl fumarate (CH₃)(C0₂Et)C[dbnd]CFCO₂Et 4 or 75% of the E-isomer of a-fluoro-P-vinyl-a,P-unsaturated diester (E,Z)-(CH₂[dbnd]CH)(CO₂C₂H₅)C[dbnd]CFCO₂Et 5, respectively. However, direct reaction of ethyl pyruvate with 2 gives the fluoro-olefin (CH₃)(CO₂Et)C[dbnd]CFCO₂Et 4 with 79% E-stere-oselectivity. The E/Zratio of (CH₂[dbnd]CH)(CO₂Et)C[dbnd]CFCO₂Et 5 depends on the HMFT or DMPU cosolvents present in the reaction mixture.     

A General and Efficient Route for the Preparation of Phenyl-Substituted Vinyl Fluorides

α-Fluorobenzyl phosphonate (EtO)₂P(O)CFHPh ( 2 ) prepared from diethyl α-hydroxyphosphonate (EtO)₂P(O)CH(OH)Ph ( 1 ) and diethylaminosulfur trifluoride (DAST), reacts with bases such as butyllithium, tert-butyllithium, lithium bis(trimethylsilyl)amide, or lithium diisopropylamide at −78° in THF to give the phosphonate carbanion [(EtO)₂P(O)CFPh]⁻Li⁺ ( 3 ) which was detected by acylation with propionyl chloride or by addition of MeOD to the reaction mixture to give (EtO)₂P(O)CF(COEt)Ph ( 4 ) and (EtO)₂P(O)CFDPh ( 5 ), respectively. Addition of aldehydes or ketones to a THF solution of carbanion 3 led to moderate-to-good yields of phenyl-substituted vinyl fluorides RR′C=CFPh 6 . The stereoselectivity of the products PhCH=CFPh ( 6a ) and Ph(Me)C=CFPh ( 6i ) formed in the reaction was examined. The presence of hexamethylphosphoric triamide or N,N′-dimethylpropyleneurea as cosolvent in the preparation of 6a and 6i increased the (Z)-stereoselectivity. However, the presence of LiCl in THF did not alter the (E)/(Z)-ratio of the product.     

One‐Pot Synthesis of Trifluoromethylated 4‐Cyanoalka‐1,4‐dienes with Predominant Z‐Selectivity

The consecutive reaction of diethyl (1‐cyanobut‐3‐enyl)phosphonate with n‐butyllithium, trifluoroacetic anhydride, and Grignard reagents gave trifluoromethylated 4‐cyano‐alka‐1,4‐dienes in 45–89% yields with predominant Z‐selectivity (Z∶E=89–78∶11∶22). Two isomers could be easily separated by column chromatography.     

Tetrafluorine‐Containing Ketones and Acetoacetates: Synthesis and Mechanistic Study

Addition of trimethylsilyl trifluoroacetate to the carbanions of α‐fluorobenzyl‐phosphonate ( 3 ) or diisopropyl(fluorocarbethoxymethyl)phosphonate ( 9 ) formed the corresponding intermediates [CF₃C(O)CFPh]^?Li⁺ ( 10 ) and [CF₃C(O)CFCO₂Et]^?Li⁺ ( 11 ), respectively. Subsequent protonation, alkylation or allylation of 10 and 11 afforded trifluoromethyl fluorobenzyl ketones 12 and ethyl 2,4,4,4‐tetra‐fluoroacetoacetates 13 . Based on the results obtained, a plausible mechanism was proposed.     

Highly stereoselective synthesis of 6-perfluoroalkyl-6-fluoroalka-2,3,5-(Z)-trienols through carbometallation-elimination of 5-perfluoroalkyl-substituted 4(E)-alken-2-ynols with Grignard reagents

A highly regio- and stereoselective sequential carbometallation and Z-selective β-elimination reaction of 5-perfluoroalkyl-4(E)-en-2-ynols with Grignard reagents in Et₂O has been developed to afford various 6-perfluoroalkyl-6-fluoroalka-2,3,5(Z)-trienols in good to excellent yields. Primary or secondary alkyl or aryl Grignard reagents may be used to introduce the R² group to the 2-position of the starting materials referring to the hydroxyl group. A mechanism for this transformation has been proposed.     

Structural studies of carbanionic species α to a phosphoryl group; anion from ketophosphonate comparison with related enoxysilanes and p-ylid

The structure of the carbanionic species 4 formed from diethyl(2-oxopropyl)phosphonate and t-BuOK has been studied by ¹H, ¹³C and ³¹P NMR. In an associating medium (pyridine), a single chelated (C) carbanionic species 4Z (C) is observed. Two slowly interconverting species 4Z and 4E co-exist when the anion-cation interaction is loose, i.e. in Me₂SO and when the gegenion K⁺ is complexed to (2,2,2)cryptand in Me₂SO. The anionic carbon of 4Z and 4E is planar, and they have a strong enolate character as shown by the barrier to rotation around the C-1? C-2 bond (ΔG_c?～92 KJ mol^?1). Their structures are compared to those of the related E and Z 1-diethylphosphonato-2-trimethylsilyloxypropenes and to (acetylmethylene)triphenylphosphorane.     

Paramagnetic products formed in the reactions of organometallic compounds. XII ESR study of oxido anion substituted diaryl ketyl radicals

In the reactions of alkyl-substituted-benzenecarboxylic and -2-hydroxybenzenecarboxylic acids (ArCOOH) with alkyl-substituted phenyl Grignard reagents (RMgX) in the presence of nickel, ketyl radicals Ar? CO^?? R are formed. The para substituents (H, Me, Et, Isopr and t-Bu) of R increase the non-equivalence of its ortho protons (a change of a₂^H = 0.43 mT, a₆^H = 0.422 mT to 0.435 mT, 0.395mT respectively, on substituting t-butyl for H at position 4). The oxido anion group originating from 2-hydroxybenzenecarboxylic acid has a strong push effect and nearly doubles the unpaired spin density on the phenyl ring R.     

Synthesis and crystal structure of ethyl benzimidazole-2-yl phosphonate

When N-cyanoimido-( O,O-diethyl)phosphonyl/S-methyl thiocarbonate (1) was treated with o-phenylenediamine in the presence of Et3N in ethanol,diethyl benzimidazole-2-yl phos-phonate (2) was obtained and hydrolyzed during the recrys-tallization in MeOH/H2O,generating ethyl benzimidazole-2-yl phosphonate (3).Hie crystal structure of compound 3 was determined by X-ray diffraction method.The crystals belong to monoclinic,space group C2/c,a = 1.78408(18) ,6 = 0.83725(9),c= 1.67401(18) nm,β= 118.997(2),V = 2.1870(4) nm3,Z = 8,Dc=1.374 g/cm3,F(000)=944.The final R and wR are 0.0499 and 0.1436,respectively.The mechanism of the above reaction is also discussed.     

A facile stereoselective synthesis of (E)‐α‐silylvinyl sulfides via hydromagnesiation of alkynylsilanes

Hydromagnesiation of alkynylsilanes 1 in diethyl ether gave (Z)‐α‐silylvinyl Grignard reagents 2 , which reacted with arylsulfenyl chlorides 3 to afford stereoselectively (E)‐α‐silylvinyl sulfides 4 in good yields. (E)‐α‐Silylvinyl sulfides 4 could undergo the cross‐coupling reactions with Grignard reagents in the presence of NiCl₂(PPh₃)₂ to give stereoselectively (Z)‐1,2‐disubstituted vinylsilanes 5 . © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:644–647, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20165     

Stereoregularity of poly(alkyl α-chloroacrylates) and mechanism of isotactic polymerization

The catalytic activity of the complexes prepared by the reaction of Grignard reagents with ketones, esters, and an epoxide as polymerization catalysts of methyl and ethyl α-chloroacrylates was investigated. The modifiers which gave isotactic polymers were α,β-unsaturated ketones such as benzalacetophenone, benzalacetone, dibenzalacetone, mesityl oxide, and methyl vinyl ketone, and α,β-unsaturated esters such as ethyl cinnamate, ethyl crotonate, and methyl acrylate. Catalysts with butyl ethyl ketone, propiophenone, and propylene oxide as modifiers produced atactic polymers but no isotactic polymers. It was revealed that the complex catalysts having a structure ? C?C? O? MgX (X is halogen) gave isotactic polymers. The mechanism of isotactic polymerization was discussed. In addition, for radical polymerization of ethyl α-chloroacrylate, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH_i^* ? ΔH_s^* = 910 cal/mole and ΔS_i^* ? ΔS_s^* = 0.82 eu.     

Facile synthesis of 2,4-dienals via an arsonium salt and its application to some natural products

2,4-Dienals were synthesized conveniently by using a new formylenylolefination method. The aldehydes were reacted with formylallyltriphenylarsonium bromide ( 2 ) in Et₂O THF H₂O (9 : 1 : 0.05) in the presence of K₂CO₃ at room temperature to give (2E,4E)-and (2E,4Z)-dienals, in favor of the former. They could be easily separated by chromatography, and the latter, in CH₂Cl₂, could be converted to the former on treatment with a catalytic amount of iodine in daylight. The configurations of the (E,E) products have been conveniently identified by ¹H NMR determined in C₆D₆. The syntheses of two natural products, navenone A and Otanthus maritima amide, by this method are also reported in detail.     

Z-Selective intramolecular Horner-Wadsworth-Emmons reaction for the synthesis of macrocyclic alkenes

The Z-selective intramolecular Horner-Wadsworth-Emmons reaction of the substrates 7-12 (RO)₂P(O)CHR′CO₂Et (R′ = (CH₂)_nCHO) (R = Ph or o-tBuC₆H₄) gives the 13-18-membered cyclic alkenes selectively (up to Z:E = 97:3) in good yields using NaH in THF under high dilution conditions.     

Intramolecular O → Si donor-acceptor interaction in R2P(=O)CH2CH2SiF3 molecules: Synthesis of dialkyl [2-(trifluorosilyl)ethyl]phosphonate and bis[(chloromethyl)dimethylsilyl] styrylphosphonate

The reaction of diethyl [2-(triethoxysilyl)ethyl]phosphonate with boron trifluoride etherate was used to synthesize diethyl [2-(trifluorosilyl)ethyl]phosphonate. The reaction of bis(trimethylsilyl) styrylphosphonate with chloro(chloromethyl)dimethylsilane gave bis[(chloromethyl)dimethylsilyl] styrylphosphonate. Multinuclear ¹H, ¹³C, ¹⁹F, ²⁹Si, and ³¹P NMR spectroscopy established the absence of a P=O → Si coordination bond in these compounds and the four-coordinate state of the silicon atom. Evidence for this finding was obtained by B3LYP/6-31G(d) quantum-chemical calculations. However, the same calculations for R₂P(=O)· CH₂CH₂SiF₃ (R = Me, Me₂N) showed the presence in such molecules of an O → Si coordination bond both in the gas phase and in CHCl₃ solution. The distance between the O and Si atoms in this series molecules decreases with R in the order: MeO > Me > Me₂N. The axial Si-F bond length increases in the same order and parallels the order of the Hammet σ ₀ ^m constants of these substituents, relating to their interaction with π-electron systems.     

2-Cyanoacrylates in the conjugate addition of trifluoroacetic acid and nucleophilic reagents

In the presence of trifluoroacetic acid, ethyl 2-cyanoacrylate readily reacts with nucleophilic reagents, such as 2-chloro-1,3,2-benzodioxaphosphole, (EtO)₃P, (EtO)₂PCl, Ph₂PCl, Ph₃P, and thiourea. In these reactions the acid proton enters position 2 of the cyanoacrylate, whereas the nucleophilic component enters position 3, in accordance with the electron density distribution in the acrylate. In the absence of trifluoroacetic acid the above reagents, except 2-chloro-1,3,2-benzodioxaphosphole, cause ethyl 2-cyanoacrylate polymerization. The interaction of ethyl 2-cyanoacrylate with 2-chloro-1,3,2-benzodioxaphosphole and trifluoroacetic acid is the first example of a 2-cyanoacrylate taking part in the acid-initiated electrophilic conjugate addition of a weak nucleophile.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1245–1247, July, 1993.     

Synthesis of polyfunctionalized alkenes and α,β-unsaturated γ-lactams from the reaction of alkyl propiolates and CH-acids such as diethyl acetamidomalonate and ethyl acetamidocyanoacetate in the presence of triphenylphosphine

Dialkyl 1-(Z)-2-(acetylamino)-2-butenedioates, 1,1-diethyl-3-alkyl (E)-(1-acetylamino)-2-propene-1,1,3-tricarboxylate, 5-ethyl-1-methyl (E)-4-(acetylamino)-4-cyano-2-pentenedioate and ethyl 1-acetyl-2-cyano-5-oxo-2,5-dihydro-1H-pyrrole-2-carboxylate were obtained from the three-component reactions between alkyl propiolates and CH-acids such as diethyl acetamidomalonate and ethyl acetamidocyanoacetate in the presence of triphenylphosphine at room temperature in dry dichloromethane. Correspondence: Sakineh Asghari, Chemistry Department, Mazandaran University, P. O. Box 453, Babolsar, Iran.     

Low-Temperature Reactions of α-Bromopropanoyl Chloride with Lithium Derivative of Ethyl Acetate

The reaction of 2-bromopropanoyl chloride with lithium ethyl acetate generated in situ by the reaction of equimolar amounts of lithium diisopropylamide with ethyl acetate forms, depending on the conditions (temperature, time, reagent ratio), diethyl 2,2′-(3-methyloxirane-2,2-diyl)diacetate, 2,2-dibromo-N,N-diisopropylpropanamide, and ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate as minor by-products along with the expected acylation product ethyl 4-bromo-3-oxopentanoate. The reaction with 2 or 5 equiv of lithium ethyl acetate (–78°C → –20°C) gave, together with the mentioned α-bromo ester, ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate formed as a result of transformations of the adduct of the second LiCH₂CO₂Et molecule and ethyl-4-bromo-3-oxopentanoate. The reaction 2-bromopropanoyl chloride with sodium malonic ester involves acylation of enol form of the primary expected acylation product to afford dimethyl |2-bromo-1-[(2-bromopropanoyl)oxy]propylidene-malonate.

     

Characterization of transient species and products in photochemical reactions of Re(dmb) (CO)3 Et with and without CO2

Transient FT-IR spectra of fac-Re(dmb)(CO)₃(Et) after laser excitation (355 nm) were investigated in THF under Ar and CO₂ atmospheres. The CO stretching bands of Re(dmb^⊙)(CO)₃(THF) grow (2008 and 1897 cm^?1) and those of Re(dmb)(CO)₃(Et) bleach (1987 and 1875 cm^?1) at times <1 μs, consistent with clean cleavage of the Re-Et bond. Under a CO₂ atmosphere, the long-lived radical (τ>100 ms) converts slowly to the formato complex Re(dmb)(CO)₃(OC(O)H) (2020, 1916, 1873 and 1630 cm^?1). When the solvent is slightly wet, the bicarbonato complex, Re(dmb)(CO)₃(OC(O)OH), is also observed after photolysis under CO₂.     

Four related diethyl [(arylamino)(4‐ethynylphenyl)methyl]phosphonates

Crystal structures are reported for four related diethyl [(arylamino)(4‐ethynylphenyl)lmethyl]phosphonate derivatives, namely diethyl [(4‐bromoanilino)(4‐ethynylphenyl)methyl]phosphonate, C₁₉H₂₁BrNO₃P, (I), diethyl ((4‐chloro‐2‐methylanilino){4‐[2‐(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C₂₃H₃₁ClNO₃PSi, (II), diethyl ((4‐fluoroanilino){4‐[2‐(trimethylsilyl)ethynyl]phenyl}methyl)phosphonate, C₂₂H₂₉FNO₃PSi, (III), and diethyl [(4‐ethynylphenyl)(naphthalen‐2‐ylamino)methyl]phosphonate, C₂₃H₂₄NO₃P, (IV). The conformation of the anilinobenzyl group is very similar in all four compounds. The P—C bond has an approximately staggered conformation, with the aniline and ethynylphenyl groups in gauche positions with respect to the P=O double bond. The two six‐membered rings are almost perpendicular. The sums of the valence angles about the N atoms vary from 344 (2) to 351 (2)°. In the crystal structures, molecules of (I), (III) and (IV) are arranged as centrosymmetric or pseudocentrosymmetric dimers connected by two N—H...O=P hydrogen bonds. The molecules of (II) are arranged as centrosymmetric dimers connected by C_methyl—H...O=P hydrogen bonds. The N—H bond of (II) is not involved in hydrogen bonding.     

Unexpected reactions of dichloro(ethyl)silane with DMSO in organic solvents

The effect of the solvent nature on the composition of the products formed upon the reaction between EtSi(H)Cl₂ and DMSO (molar ratio 1: 1, 0 °C) was revealed. This reaction in non-polar and low polar solvents (toluene, chloroform) gives oligoethyl(hydro)cyclo-siloxanes ((EtSi(H)O) _n , n = 3—8) as the major products in the yields up to 77%. In MeCN, oligoethyl(hydro)cyclosiloxanes are formed along with cyclic monochlorinated siloxanes ((EtSi(H)O) _n (EtSi(Cl)O), n = 2—7) in a ratio of ~7: 3 (68: 29 wt.%). In excess diethyl ether, the overall yield of oligoethyl(hydro)cyclosiloxanes does not exceed 25% and the major products are linear α,ω-diethoxyoligoethyl(hydro)siloxanes (EtO(EtSi(H)O) _n Et, n = 2—7) formed in 70—75% yields. A plausible reaction mechanism leading to the final products was suggested. Apparently, the reaction proceeds via ethyl(hydro)-and chloro(ethyl)silanones as intermediates.     

Two phosphonodehydrotripeptides: Boc0–Gly1–Δ(Z)Phe2–α‐Abu3PO3Me2 and Boc0–Gly1–Δ(Z)Phe2–α‐Nva3PO3Et2

The present paper reports the crystal structures of two short phosphonotripeptides (one in two crystal forms) containing one ΔPhe (dehydrophenylalanine) residue, namely dimethyl (3‐{[tert‐butoxycarbonylglycyl‐α,β‐(Z)‐dehydrophenylalanyl]amino}propyl)phosphonate, Boc⁰–Gly¹–Δ(Z)Phe²–α‐Abu³PO₃Me₂, C₂₁H₃₂N₃O₇P, (I), and diethyl (4‐{[tert‐butoxycarbonylglycyl‐α,β‐(Z)‐dehydrophenylalanyl]amino}butyl)phosphonate, Boc⁰–Gly¹–Δ(Z)Phe²–α‐Nva³PO₃Et₂, as the propan‐2‐ol monosolvate 0.122‐hydrate, C₂₄H₃₈N₃O₇P·C₃H₈O·0.122H₂O, (II), and the ethanol monosolvate 0.076‐hydrate, C₂₄H₃₈N₃O₇P·C₂H₆O·0.076H₂O, (III). The crystals of (II) and (III) are isomorphous but differ in the type of solvent. The phosphono group is linked directly to the last C_α atom in the main chain for all three peptides. All the amino acids are trans linked in the main chains. The crystal structures exhibit no intramolecular hydrogen bonds and are stabilized by intermolecular hydrogen bonds only.