The Reaction of 3-Arylsydnone-4-Carbohydroximic Acid Chlorides with Active Methylene Compounds (II)

In the presence of triethylamine, 3-arylsydnone-4-carbohydroximic acid chlorides react not only with active methylene compounds containing keto groups to give 3-aryl-4-(4′,5′-disubstituted-isoxazol-3′-yl)sydnones, but also with compounds containing cyano groups to produce 3-aryl-4-(4′-substituted-5′-aminoisoxazol-3′-yl)sydnones or 3-aryl-4-(4′-cyano-5′-substituted-isoxazol-3′-yl)sydnones.     

The Reaction of 3-Arylsydnone-4-Carbohydroximic Acid Chlorides with Active Methylene Compounds

3-Arylsydnone-4-carbohydroximic acid chlorides react with compounds containing activated methylene groups in the presence of bases to give 3-aryl-4-(4′,5′-disubstituted-iso-xazol-3′-yl)sydnones which have not been reported in the literature. All the products were obtained in good yields, and their structures were confirmed by spectral analysis and elemental analysis.     

Reaktionen des 1,1′, 3,3′-Tetrakis(dimethylamino)-1λ5, 3λ5-diphosphets mit S?H-aciden Verbindungen

Reaction of 1,′, 3,3′-Tetrakis(dimethylamino)-1λ⁵,3λ⁵-diphosphete with S? H Acidic Compounds. Reaction of 1,′,3,3′-tetrakis(dimethyl-amino)-1λ⁵,3λ⁵-diphosphete ( 1 ) with hydrogen sulfide yields bis(dimethylamino)thiophosphonylmethylidene-methyl-bis(dimethylamino)phosphorane ( 5 ).Water eliminates dimethylamine from 5 and forms bis(dimethyl-amino)thiophosphonyl-methyl(dimethylamino)phosphonylmethylene 6 . The reaction of 1 with ethylmercaptane yields the 2,4-bis(ethylthio)-derivative of 1 , i.e. compound 8 and bis(dimethylamino)phosphanylmethylidene-methyl-bis(dimethylamino)phosphorane ( 9 ), which is also formed from 1 and 2,4,6-trimethylphenylphosphane. Thiophenol protonates 1 to give the corresponding cation which is isolated as its thiophenolate, 10 . Properties, nmr and mass spectra of 5, 6 and 8 – 10 are described and discussed.     

Molecular engineering of liquid crystalline polymers by “living” polymerization. XXXII. Synthesis and “living” cationic polymerization of 3-fluoro-4′-(ω-vinyloxyalkoxy)-4-biphenylyl (2r,3s)-2-fluoro-3-methylpentanoate with undecanyl and octyl alkyl groups

The synthesis and “living” cationic polymerization of 3-fluoro-4′-(11-vinyloxyundecany-loxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-11 ) and 3-fluoro-4′-(8-vi-nyloxyoctyloxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-8 ) are presented. Poly ( 12-11 )s and poly ( 12-8 )s with degrees of polymerization from 4.0 to 16.5 and poly-dispersities ≤ 1.13 have been synthesized and characterized by differential scanning cal-orimetry (DSC) and thermal optical polarized microscopy. Over the entire range of molecular weights poly ( 12-11 )s and poly ( 12-8 )s exhibit an enantiotropic S_A and an unidentified S_X phase. In addition, regardless of its molecular weight, poly ( 12-8 ) exhibits a S^*_c phase in between the S_A and S_x phases. Poly ( 12-11 ) and poly ( 12-8 ) show lower transition tem-peratures and broader temperature ranges of all their mesophases as compared to the corresponding polymers without a fluorine atom on the biphenyl group. The role of the connecting group between the biphenyl and chiral group of the mesogenic unit on the phase behavior of these polymers is also discussed. Copolymers of 12-8 with (2R,3S)-2-fluoro-3-methylpentyl 4′-(11-vinyloxyundecanyloxy)biphenyl-4-carboxylate ( 13-11 ) {i.e., poly-[( 12-8 )-co-( 13-11 )] (X/Y), where X/Y represents the molar ratio of monomer 12-8 to monomer 13-11 } with DP of ca. 11 and polydispersities lower than 1.23 were also syn-thesized and characterized. Their S_A and S^*_c mesophases exhibit continuous dependences of composition and this support the assignment of the mesophases exhibited by poly ( 12-8 ). © 1995 John Wiley & Sons, Inc.     

The Reaction of 4-Formylsydnone and Methyl Ketones

In the presence of base, 3-subslituted 4-fonnyl- and 4-acetylsydnones decarbonylated to afford the corresponding 3-substituted sydnones. The Claisen-Schmidt reaction occurred between 3-substituted 4-for-mylsydnones and methyl ketone (such as 4-acetylsydnones, acetone and acetophenone) in dilute basic solution or electrogenerated basic (EGB) solution.     

Nucleosides 4: Synthesis of 2′,3′-Didehydro-2′,3′-dideoxydoridosine and 2′,3′-Dideoxydoridosine as Potential Antihypertensive Agents

To measure the hydrophobic character of the ribose moiety of doridosine on the adenosine receptors, 2′,3′-didehydro-2′,3′-dideoxydoridosine (2) and 2′,3′-dideoxydoridosine (3) were prepared. Initial treatment of doridosine with N,N-dimethylformamide diethylacetal, and subsequently with tert-butyldimethylsilyl chloride gave 5. Compound 5 was then reacted with 1,1′-thiocarbonyldiimidazole and the resulting thionocarbonate 6 was heated with triethyl phosphite at 135°C to afford 7. Treatment of compound 7 with tetrabutylammonium fluoride and methanolic ammonia furnished compound 2 in good yield. Compound 2 was subjected to catalytic hydrogenation affording compound 3 in 85% yield.     

Studies on the Preparation and Biological Activities of 3-(O-Methoxybenzyl)Sydnone Derivatives and 3-(Fluorophenyl)Sydnones

Two new sydnones; 3-(o-methoxybenzyl)sydnone(1) and 3-(o-melhoxybenzyl)-4-morpholinomethylsydnone(2) were synthesized from o-methoxybenzylamine and ethyl bromoacetat in moderate yields. 3-(o-,m-,p-Fluorophenyl)sydnones were prepared from the corresponding fluoroaniline and chloroacetic acid in higher yields with a conventional method. From the biological activity test, 1 shows significant response of coronary dilation test, collagen induced platelet aggregation inhibition, local anesthetic and moderate cardiotropic activity. In addition, 1 also leads to anticonvuls, muscle relaxation and behavior depression. But 2 only shows inhibition of collagen induced platelet aggregation and antiwrithing. 3-(p-Fluorophenyl)sydnone (5) shows significant response of coronary dilation, collagen induced platelet aggregation inhibition, moderate cardiotropic activity, antiwrithing and local anesthetic But 3-(o-Fluorophenyl)sydnone(3) and 3-(m-fluorophenyl)sydnone(4) only show coronary dilation and moderate cardiotropic activity.     

Carbon-13 NMR Studies of 3-Aryl-4-(5-aryl-Δ 2-1,2,4-oxadiazolin-3-yl)sydnones and 3-Aryl-4-(5-aryl-1,2,4-oxadiazol-3-yl)sydnones

The ¹³C NMR spectra of twelve 3-aryl-4-(5-aryl-Δ²-l,2,4-oxadiazolin-3-yl)sydnones and twelve 3-aryl-4-(5-aryl-l,2,4-oxadiazol-3-yl)sydnones have been measured and assigned by means of proton-noise decoupling and DEPT-experiments. The coupling constants were determined by means of gated decoupling, and NOE effects were observed by comparison of proton-decoupled and inverse-gated decoupled spectra. Differences shown by the oxadiazoline and the oxadiazole rings and the substitution effects are discussed.     

Preparation of 3-Aryl-4-(5-ARYL-Δ2-1,2,4-Oxadiazolin-3-YL)Sydnones and their Conversion into 3-ARYL-4-(5-ARYL-1,2,4-Oxadiazol-3-YL)Sydnones

3-Aryl-4-(5-aryl-Δ²-1,2,4-oxadiazolin-3-yl)sydnones (5) were synthesized in high yields by the reaction of 3-arylsydnone-4-carboxamide oximes (prepared from the corresponding 3-arylsydnone-4-carbonitriles) with aromatic aldehydes in the presence of acid catalysts. No reaction occurred when aliphatic aldehydes were used. The oxadiazolin-3-ylsydnones (5) were easily converted into the corresponding 3-aryl-4-(5-aryl-1,2,4-oxadiazol-3-yl)sydnones by N-bromosuccinimide oxidation. The 3-arylsydnone-4-carbonitrile oxides were synthesized in good yields by N-bromosuccinimide oxidation of the corresponding 3-arylsydnone-4-carboxaldehyde oximes.     

Proton Nuclear Magnetic Resonance Measurements of 2′-Aminodeoxyuridylyl-3′,5′-Deoxyuridine

A dideoxyribonucleotide, 2′-amino-2′-deoxyuridylyl 3′,5′-deoxyuridine, containing an unsual base (2′-amino-2′-deoxyuridine) that isresistant to nucleases was investigated by ′H NMR. The pK_a of the protonation of the amino group (5.8) was determined by profiles of chemical shifts of protons in the vicinity of amino group versus pH. However, protonation of the amino group has little effect on the conformation of the dimer, assumed to be B-form DNA. This conclusion is drawn from the chemical shift data and coupling constants of H₁-H₂. Thus, 2′-amino-2′-deoxyuridine can be used in antisense and anticode oligonucleotides.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Synthesis and anti-inflammatory-analgesic activity of 2′,4′-difluoro-3-（carbamoyl）biphenyl-4-yl benzoates

Eighteen 2′,4′-difluoro-3-（carbamoyl）biphenyl-4-yl benzoates were synthesized from diflunisal in three steps with total yields from 72% to 86%. All compounds were identified by IR, 1^H NMR, MS and elemental analysis. The anti-inflammatory activity and analgesic activity for 18 compounds were evaluated. The preliminary assay results showed that compounds 4a and 4p exhibited potent anti-inflammatory-analgesic activity.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Purine 3′:5′‐cyclic nucleotides with the nucleobase in a syn orientation: cAMP,cGMP and cIMP

Purine 3′:5′‐cyclic nucleotides are very well known for their role as the secondary messengers in hormone action and cellular signal transduction. Nonetheless, their solid‐state conformational details still require investigation. Five crystals containing purine 3′:5′‐cyclic nucleotides have been obtained and structurally characterized, namely adenosine 3′:5′‐cyclic phosphate dihydrate, C₁₀H₁₂N₅O₆P·2H₂O or cAMP·2H₂O, (I), adenosine 3′:5′‐cyclic phosphate 0.3‐hydrate, C₁₀H₁₂N₅O₆P·0.3H₂O or cAMP·0.3H₂O, (II), guanosine 3′:5′‐cyclic phosphate pentahydrate, C₁₀H₁₂N₅O₇P·5H₂O or cGMP·5H₂O, (III), sodium guanosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₁N₅O₇P⁻·4H₂O or Na(cGMP)·4H₂O, (IV), and sodium inosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₀N₄O₇P⁻·4H₂O or Na(cIMP)·4H₂O, (V). Most of the cyclic nucleotide zwitterions/anions [two from four cAMP present in total in (I) and (II), cGMP in (III), cGMP⁻ in (IV) and cIMP⁻ in (V)] are syn conformers about the N‐glycosidic bond, and this nucleobase arrangement is accompanied by C_rib—H…N_pur hydrogen bonds (rib = ribose and pur = purine). The base orientation is tuned by the ribose pucker. An analysis of data obtained from the Cambridge Structural Database made in the context of syn–anti conformational preferences has revealed that among the syn conformers of various purine nucleotides, cyclic nucleotides and dinucleotides predominate significantly. The interactions stabilizing the syn conformation have been indicated. The inter‐nucleotide contacts in (I)–(V) have been systematized in terms of the chemical groups involved. All five structures display three‐dimensional hydrogen‐bonded networks.     

Synthesis and properties of soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride and aromatic diamines

Aromatic tetracarboxylic dianhydride having crank and twisted noncoplanar structure, 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 2,2′-dihydroxy-1,1′-binaphthyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). Binaphthyl-2,2′-diyl–containing novel aromatic polyimides having inherent viscosities up to 0.67 dL/g were obtained by the one-step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and pyridine. These aromatic polyimides had glass transition temperatures in the range of 280–350°C, depending on the nature of the diamine moiety. All polymers were stable up to 400°C, with 10% weight loss being recorded above 485°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1937–1943, 1998     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.