Simultaneous application of Fourier transform Raman spectroscopy and differential scanning colorimetry for the in situ investigation of phase transitions in condensed matter

The combination of Fourier transform Raman spectroscopy with differential scanning colorimetry for the in situ investigation of phase transitions is illustrated using ammonium nitrate as an example. This method helps unambiguous characterisation of different phases by providing a simultaneous probe of thermodynamic and vibrational data.     

Revised vibrational band assignments for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile based on ab initio, DFT and normal coordinate calculations

In the present study, a systematic vibrational spectroscopic investigation for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile (TFB), aided by electronic structure calculations has been carried out. The electronic structure calculations – ab initio (RHF) and hybrid density functional methods (B3LYP) – have been performed with 6-31G* basis set. Molecular equilibrium geometries, electronic energies, IR intensities, harmonic vibrational frequencies, depolarization ratios and Raman activities have been computed. The results of the calculations have been used to simulate IR and Raman spectra for TFB that showed excellent agreement with the observed spectra. Potential energy distribution (PED) and normal mode analysis have also been performed. The assignments proposed based on the experimental IR and Raman spectra have been reviewed. A complete assignment of the observed spectra has been proposed.     

Polymorphism and Conformational Equilibrium of Nitro-Acetophenone in Solid State and under Matrix Conditions

Conformational and polymorphic states in the nitro-derivative of o-hydroxy acetophenone have been studied by experimental and theoretical methods. The potential energy curves for the rotation of the nitro group and isomerization of the hydroxyl group have been calculated by density functional theory (DFT) to estimate the barriers of the conformational changes. Two polymorphic forms of the studied compound were obtained by the slow and fast evaporation of polar and non-polar solutions, respectively. Both of the polymorphs were investigated by Infrared-Red (IR) and Raman spectroscopy, Incoherent Inelastic Neutron Scattering (IINS), X-ray diffraction, nuclear quadrupole resonance spectroscopy (NQR), differential scanning calorimetry (DSC) and density functional theory (DFT) methods. In one of the polymorphs, the existence of a phase transition was shown. The position of the nitro group and its impact on the crystal cell of the studied compound were analyzed. The conformational equilibrium determined by the reorientation of the hydroxyl group was observed under argon matrix isolation. An analysis of vibrational spectra was achieved for the interpretation of conformational equilibrium. The infrared spectra were measured in a wide temperature range to reveal the spectral bands that were the most sensitive to the phase transition and conformational equilibrium. The results showed the interrelations between intramolecular processes and macroscopic phenomena in the studied compound.     

Thermal studies on polymorphic structures of tibolone

Tibolone polymorphic forms I (monoclinic) and II (triclinic) have been prepared by recrystallization from acetone and toluene, respectively, and characterized by different techniques sensitive to changes in solid state, such as polarized light microscopy, X-ray powder diffractometry, thermal analysis (TG/DTG/DSC), and vibrational spectroscopy (FTIR and Raman microscopy). The nonisothermal decomposition kinetics of the obtained polymorphs were studied using thermogravimetry. The activation energies were calculated through the Ozawa’s method for the first step of decomposition, the triclinic form showed a lower E _a (91 kJ mol⁻¹) than the monoclinic one (95 kJ mol⁻¹). Furthermore, Raman microscopy and DSC at low heating rates were used to identify and follow the thermal decomposition of the triclinic form, showing the existence of three thermal events before the first mass loss.     

Asymmetry of H2O Molecules in the Liquid State and Its Consequences

The correlations between the geometrical parameters of the O–H...O hydrogen bridge and the stretching frequency _OH are refined by using neutron diffraction and vibrational spectroscopy data. The distribution functions of the interatomic distances r _OH and intermolecular distances R _O...O in water in the range from –40 to 100°C were calculated from the Raman spectra of HOD. The extent of asymmetry of H₂O molecules in the liquid state, caused by fluctuations of the local environment of two OH groups, and its manifestations in the structure and vibrational spectra of water are analyzed.     

Infrared optical constants, dielectric constants, molar polarizabilities, transition moments, dipole moment derivatives and Raman spectrum of liquid cyclohexane

Previous studies have been done in this laboratory focusing on the optical properties of several liquid aromatic and aliphatic hydrocarbons in the infrared. The current study reports the infrared and absorption Raman spectra of liquid cyclohexane. Infrared spectra were recorded at 25 °C over a wavenumber range of 7400–490 cm⁻¹. Infrared measurements were taken using transmission cells with pathlengths ranging from 3 to 5000 μm. Raman spectra were recorded between 3700 and 100 cm⁻¹ at 25 °C using a 180° reflection geometry. Ab initio calculations of the vibrational wavenumbers at the B3LYP/6311G level of theory were performed and used to help assign the observed IR and Raman spectra. Extensive assignments of the fundamentals and binary combinations observed in the infrared imaginary molar polarizability spectrum are reported. The imaginary molar polarizability spectrum was curve fitted to separate the intensity from the various transitions and used to determine the transition moments and magnitudes of the derivatives of the dipole moment with respect to the normal coordinates for the fundamentals.     

Resonance Raman spectra of metalloporphyrins. On the methine-bridge vibrations of ferric octaethylporphyrins and its α′, β′, γ′, and δ′ deutero derivatives

Raman spectra of Fe³⁺ and Pd²⁺ octaethylporphyrin (OEP) and their α′, β′, γ′, and δ′ deutero derivatives were measured with the 5145, 4880 and 4765 Å lines of an Ar ion laser. Raman bands due to methine-bridge stretching vibrations were assigned and their vibrational amplitudes were calculated from the observed frequency shifts on deuterium substitution of methine-bridge hydrogens. These vibrations correspond to the spin-state sensitive Raman bands of heme proteins. On the basis of symmetry considerations and the observed polarizations, vibrational assignments of other Raman bands were made.     

Conformational Stability, Raman and Infrared Spectra, Vibrational Assignment, and Ab Initio Calculations of Allyltrifluorosilane

The Raman spectra (3500 to 30 cm^–1) of allyltrifluorosilane, CH₂CHCH₂SiF₃, in the liquid with quantitative depolarization ratios and solid states, and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Additionally, the mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (–100° to –55°C) have been recorded. All of these data indicate there are two conformers, the more stable gauche rotamer and a very small amount of the cis conformer in the fluid states, but only the gauche form remains in the polycrystalline solid. The variable temperature studies of the infrared spectrum of the xenon solution indicate a relatively large enthalpy difference of 354±30 cm^–1 (4.23±0.36 kJ/mol) between the conformers. The fundamental frequencies for the asymmetric (54 cm^–1) and SiF₃ (48 cm^–1) torsions for the gauche conformer were observed in the far infrared spectrum, and from the SiF₃ torsional frequency the barrier to internal rotation is calculated to have a value of 525 cm^–1 (6.28 kJ/mol). A complete vibrational assignment is presented for the gauche conformer that is consistent with the predicted wavenumbers utilizing the force constants from ab initio MP2/6-31G* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational wavenumbers have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with corresponding results for some similar molecules.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

A combined experimental and theoretical study of resonance emission spectra of SO2( B2)

Experimental and theoretical resonance emission spectra are obtained for a number of vibrational states of SO₂( ¹B₂). The experimental emission spectra are dominated by (n₁ν₁, n₂ν₂, 0) bands, but some weak activity in the anti-symmetric stretch (ν₃) is observed. The calculated emission spectra based on an empirical near-equilibrium potential energy surface agree reasonably well with experiment for two lowest states investigated here, but fail to reproduce higher ones. Resonance Raman spectra are also calculated and agree well with an earlier experiment.     

Vibrational spectra of mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes: Density functional theory calculations

The vibrational (IR and Raman) spectra of neutral and reduced mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes Y(Pc)(Por) and [Y(Pc)(Por)]⁻ [the simplified models of mixed (phthalocyaninato)(porphyrinato) rare earth(III) complexes] are studied using density functional theory (DFT) calculations. The simulated IR and Raman spectra of Y(Pc)(Por) are compared with the experimental IR spectrum of Tb(Pc)(TClPP) and Raman spectrum of Y(Pc)(TClPP), respectively, and many bands can acceptably fit in spite of the different species. On the basis of comparison with the simulated spectra of PbPc and PbPor together with the assistance of normal coordinate analysis, the calculated frequencies in their IR and Raman spectra are identified in terms of the vibrational mode of different ligand for the first time. The calculated frequency at 1048 cm⁻¹ in the IR spectrum of [Y(Pc)(Por)]⁻ with contribution from both Pc and Por vibrational modes is the characteristic IR vibrational mode of the reduced double-decker, while the characteristic IR vibrational mode of Y(Pc)(Por) attributed from the vibration of phthalocyanine monoanion radical Pc⁻ appears at 1257 cm⁻¹. In line with our previous experimental findings that the Raman spectra of M(Pc)(TPP) and M(Pc)(TClPP) are dominated by the Pc vibrational modes, theoretical calculations indicate that most of the Raman vibrational modes contributed from Por ring are covered up by those of Pc ring and thus are hard to be recognized in the Raman spectra of [Y(Pc)(Por)]⁻ and Y(Pc)(Por) due to their much weaker intensity in comparison with that of Pc ligand. Comparison in the IR and Raman spectra between [Y(Pc)(Por)]⁻ and Y(Pc)(Por) also suggests the localization of hole on the Pc ring in the neutral double-decker Y(Pc)(Por). The present work, representing the first detailed DFT study on the vibrational spectra of mixed (phthalocyaninato)(porphyrinato) rare earth(III) double-decker complexes, is useful in helping to understand the vibrational spectroscopic properties of this series of mixed tetrapyrrole ring complexes.     

Inelastic neutron scattering and vibrational spectra of 2-(N-methyl-α-iminoethyl)-phenol and 2-(N-methyliminoethyl)-phenol: Experimental and theoretical approach

The infrared, Raman, and inelastic neutron scattering (INS) spectra of two ortho-hydroxy aryl Schiff’s bases, 2-(N-methyliminoethyl)-phenol and 2-(N-methyl-α-iminoethyl)-phenol, were recorded. Ab initio molecular orbital calculations employing the DFT (B3LYP) method with the 6-31G** basis set for both compounds were done. Assignments of vibrational modes within the 3500–50 cm⁻¹ spectral region were carried out. On the basis of the DFT calculations, four rotomers of 2-(N-methyl-α-iminoethyl)-phenol were analysed.     

Vibrational spectra and noncovalent interactions of carbohydrates molecules

The differences between the vibrational spectra of carbohydrates of the same chemical structure caused by the noncovalent intra- and intermolecular interactions have been systematized. In the general case, these differences show up as the following specific features of changes in the bond intensities: change in the intensity ratio of closely spaced bands (IR and Raman spectra); selective change (increase, decrease) in intensities of individual bands (IR and Raman spectra); change (increase, decrease) in intensities of practically all bands (IR and Raman spectra); appearance of strong bands in the region of low frequencies from 50 to 200 cm⁻¹ (Raman spectra); appearance of strong diffuse bands in the low-frequency range with a simultaneous great reduction in the other bands (practical disappearance of the majority of bands) (Raman Spectra). The causes of such a kind of changes in the band intensities in the vibrational spectra of carbohydrates are discussed.     

NIR FT Raman Spectroscopy–a Rapid Analytical Tool for Detecting the Transformation of Cellulose Polymorphs

This is a report of the combined use of NIR FT Raman spectroscopy and X-ray diffraction measurements (WAXS) to investigate the polymorphic transformation of cellulose I into cellulose II. For this reason samples of cellulose I were swelled in different concentrations of NaOH and dissolved in different molten inorganic salts hydrates (LiCl·2ZnCl₂·6H₂O, LiClO₄·3H₂O, LiSCN·2,5H₂O and ZnCl₂·4H₂O). NIR FT Raman spectra of the alkali treated samples were recorded. They characterize the pure modifications cellulose I and II as well as mixtures of the two polymorphic phases. The results of the Raman measurements were confirmed by X-ray scattering. The paper demonstrates that FT Raman vibrational spectroscopy is a powerful, rapid analytical method which may be used to follow the polymorphic transformation of cellulose I into cellulose II.     

Spectra and structure of silicon containing compounds

The Raman (50 to 3200 cm^–1) and infrared (50 to 3500 cm^–1) spectra of chlorodimethylmethoxysilane, Cl(CH₃)₂SiOCH₃, in the vapor and solid phases have been recorded. Raman spectra of the liquid including depolarization ratios have also been recorded. Optimized geometries and conformational stabilities have been obtained from ab initio calculations utilizing the RHF/3–21G* and RHF/6–31G* basis sets. The calculations from both of these basis sets indicated the gauche conformer to be significantly more stable than the trans conformer. Since the gauche has twice the multiplicity of the trans form it is unlikely that the trans conformer will be detected in the fluid phases at room temperature. This is supported by the fact that no infrared or Raman bands were found to vanish in the spectra of the crystalline solid. The vibrational frequencies have been calculated using appropriate scaling factors, and the vibrational spectra are interpreted in detail. The results have been compared with those obtained for some related molecules.Dedicated to Professor Dr. H. Kriegsmann on the occasion of his 70th birthdayFor part XX, see J Raman Spectrosc 26:in press (1995)Analytical R/D Department, Organic Products Division, Miles Inc., Bushy Park Plant. Charleston, SC 9411, USAChemistry Department, Mu'tah University, P.O.Box 7, Mu'tah-Karak, JordanDepartment of Chemistry, Moscow State University, Moscow, B-234, RussiaDepartment of Ceramic Engineering, Inha University, Nam-Ku, Incheon 160, KoreaDepartment of Chemistry, University of Oslo, P.O.Box 1033, 0315 Oslo, Norway     

Development and Application of Instrumental Methods for Strain Analysisof Semiconductor Layers and Devices

 Strain effects on semiconductor layers were studied by means of optical spectroscopic techniques with a device developed especially for the study of layered structures and microstructures. Raman, modulated photoreflectance and reflectance anisotropy spectroscopy (RAS) were applied. Measurements were performed on elemental semiconductors (Si), semiconductor alloys (Si–Ge) and III–V semiconductor compounds (GaAs). By application of RAS, strains lower than 10⁻⁴ could be resolved, which is at least one order of magnitude lower than those observable with Raman and modulated reflectance techniques. The RAS spectra of layers strained along either the [010] or [011] direction showed a derivative-like structure at E₁-gap energies, which increased linearly and very quickly with increasing strain. The dependence of this spectral feature on applied strain was used to evaluate strain-dependent effects. This behaviour strongly suggests that RAS can be applied for the optical characterisation of strain in semiconductor microstructures and devices, with a higher efficiency and accuracy than that achieved by previously established optical methods such as Raman and modulation spectroscopy. In addition, the compactness and ease of operation of the instrumentation of RAS provides considerable potential for in situ monitoring/control of semiconductor fabrication conditions.     

Applications of FT Raman Spectroscopy and Micro Spectroscopy Characterizing Cellulose and Cellulosic Biomaterials

FT Raman spectroscopy and micro spectroscopy were used for the investigation of cellulose, cellulose derivatives and cellulosic plant fibres. Lattice structures of cellulose, polymorphic modifications I and II, as well as amorphous structure, were clearly identified by means of FT Raman vibrational spectra. Chemometric models were developed utilizing univariate calibration as well as methods of multivariate data analyses of FT Raman spectral data for the fast prediction of cellulose properties. Cellulose properties like the degree of crystallinity Xc_Raman, the degree of substitution DS_CMC, DS_AC and cellulose reactivity were determined. In situ/ in vivo FT Raman micro spectroscopy was used for the characterization of cellulose structures of flax and hemp fibres. Orientational and stress dependent FT Raman experiments were carried out.     

Simultaneous Quantification of Three Polymorphic Forms of Carbamazepine using Raman Spectroscopy and Multivariate Calibration

Carbamazepine is a pharmaceutical product used to treat epilepsy and bipolar disorder. Some active pharmaceutical ingredients, such as carbamazepine, present polymorphism that may alter the bioavailability. Consequently, the determination of different polymorphic forms has become important for the pharmaceutical industry. In this work, polymorphic forms were synthesized and characterized by differential scanning calorimetry and X-ray diffraction. Raman spectroscopy was used to quantify mixtures of the three common polymorphic forms of carbamazepine. A ternary mixture design was used to create the calibration set of ten samples and six levels of concentration for each polymorph. Partial least squares was performed to build the prediction models. Ten spectra were obtained to obtain representative Raman spectra of the mixtures. The calibration models were built using the average spectra, and an external set of samples was used to evaluate the models. The partial least squares model gave a root mean square error of prediction of 6.2% for carbamazepine I, 6.8% for carbamazepine III, and 11.6% for carbamazepine dihydrate. The results showed that good results were obtained for the solid state characterization of the mixtures of polymorphs using a fast strategy for simultaneous analysis.     

Polymorphism of phenylpyruvic acid studied by IR, Raman and solid state C NMR spectroscopy

Polymorphs I and II of phenylpyruvic acid are obtained as mixtures of both crystal forms or relatively pure crystals, from different solvents. Polymorph I is more stable than polymorph II at room temperature. Spectral characteristics of these polymorphs are discussed on the basis of IR, Raman and solid state ¹³C NMR spectra. Also, the assignment of the IR features observed in the 1600–1700 cm⁻¹ region is re-investigated by referring to the spectra of heavy-atom substituted derivatives. It is suggested that the C=O stretching band is split by the crystal field for both polymorphs.     

Vibrational spectroscopy of the basic copper phosphate minerals: pseudomalachite,ludjibaite and reichenbachite

The vibrational spectra of pseudomalachite, reichenbachite and ludjibaite have been obtained at 298 K using a combination of FTIR and Raman microscopy. The vibrational spectra of the minerals are different, in line with differences in crystal structure and composition. Some similarity in the Raman spectra of the three polymorphs pseudomalachite, reichenbachite and ludjibaite exists, particularly in the OH stretching region, but characteristic differences in the OH deformation regions are observed. Differences are also observed in the phosphate stretching and deformation regions.     

Vibrational spectra and structure ofN,N-dinitromethylamine

The vibrational (IR and Raman) spectra ofN,N-dinitromethylamine were studied. The assignments of the bands were carried out using a comparison of spectra obtained in different aggregate states, invoking the results of normal coordinate analysis. The most probable symmetry of the molecule was shown to beC _s with a planar configuration of the N(NO₂)₂ moiety.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1503–1507, August, 1995.