Dimethyl phthalate (DMP) degradation in aqueous solution by gamma-irradiation/H<Subscript>2</Subscript>O<Subscript>2</Subscript>

This work includes the applications of radiation processing to decompose dimethyl phthalate (DMP) with gamma and gamma/H₂O₂ processes. Changes in amounts of DMP, dissolved oxygen, total acidity and formaldehyde with irradiation dose were followed. The qualitative analysis of the DMP and the intermediates were determined by using a gas chromatography combined to mass spectrometry and ion chromatography. The results indicated that degradation rate of DMP was affected by H₂O₂ concentration, irradiation dose and removal efficiency of 25 mg L^?1 DMP can reach 100% for 1.42 kGy irradiation dose in the concentration of 4.8 mM H₂O₂, respectively.     

The effect of gamma irradiation on mechanical, and thermal properties of recycling polyethylene terephthalate and low density polyethylene (R-PET/LDPE) blend compatibilized by ethylene vinyl acetate (EVA)

A study has been made on the compatibility of recycled polyethylene terephthalate (R-PET) and low density polyethylene (LDPE) blend in the presence of ethylene vinyl acetate (EVA) as a compatibilizing agent prepared by extrusion hot stretching process. EVA content in the blend as a compatibilizing agent was an enhancement effect on radiation crosslinking of R-PET/EVA/LDPE blends and the highest radiation crosslinking was obtained when the EVA content was reached at 10 % EVA when irradiated by gamma irradiation. Blends containing different (EVA) ratios were irradiated to different doses of gamma irradiation 25, 50 and 100 kGy. The effect of the compatibilizer and radiation on mechanical, thermal properties of R-PET together with LDPE and morphology has been investigated. It was found that gamma irradiation together with the presence of compatibilizing agent (EVA) has positive effect on the mechanical and thermal properties of R-PET/LDPE blend. The structural properties of R-PET/LDPE modified by gamma irradiation and EVA as compatibilizing agent was examined by SEM. Also, it was found that the optimum concentration of EVA and gamma irradiation dose was found to be 10 % EVA and 100 kGy, respectively.     

Assessment of radioactivity associated with a low ore grade open cast mine at Banduhurang, Jharkhand, India and estimation of occupational exposure to the miners

The study summarizes radiological characteristics of Banduhurang open cast mine which includes qualitative and quantitative behavior of ²²²Rn concentration, external gamma radiation level over the mine pit as well as in its adjoining environment, long-lived alpha (LLα) activity concentration associated with the respirable size of ore dust and assessment of dose to the mine workers in 2006–2008. The investigations reveal that geometric means (χ_g) of measured radon concentration were 36.39, 38.69, 26.64 and 24 Bq m^?3 with respective geometric standard deviations (σ_g) were 1.52, 1.55, 1.36 and 1.68 Bq m^?3 and χ_g of gamma absorbed dose rates were 0.54, 0.64, 0. 45 and 0.15 μGy h^?1 with respective σ_g were 1.63, 1.53, 1.52 and 1.72 μGy h^?1 over the mine pit, ore yard, waste yard and in the surrounding environment within a 10 km radius to the mine, respectively. The χ_g of LLα activity was observed to be 16 mBq m^?3 with σ_g of 1.9 mBq m^?3. The annual mean effective dose equivalent received by the member radiation workers of Banduhurang mine was estimated to 1.41 mSv y^?1, which is about 7% of the prescribed dose limits of 20 mSv y^?1.     

Thermoluminescence study of gamma irradiated BCNO nanophosphor

Boron carbon oxynitride (BCNO) is a low Z_eff (≈6.8), near tissue equivalent material. Nanocrystals of the BCNO:Dy and BCNO:Cu were synthesized by solid state reaction method using different concentrations of dopants. TL characteristics of the synthesized BCNO and BCNO:Dy material doped with 2500 ppm concentration of Dy were studied and compared with each other. It is observed that the doping of BCNO with Cu or Dy leads to the quenching of its TL properties. BCNO exhibits a linear response from 1×10² to 2×10³ Gy whereas BCNO:Dy exhibits a linear response from 1×10² to 1×10³ Gy of gamma radiations. Fading and reproducibility of phosphors are also studied and it is found that the undoped BCNO shows better TL results than that of Dy doped BCNO phosphor. The main disadvantages of this material are its low thermal stability and high fading, so further studies are needed for this material before concluding it as the best dosimeter for gamma doses.     

Electrodeposition of magnesium–lithium–dysprosium ternary alloys with controlled components from dysprosium oxide assisted by magnesium chloride in molten chlorides

In the work, Gibbs energy showed that MgCl₂ can chloridize Dy₂O₃ and release Dy(III) ions in the LiCl–KCl–MgCl₂–Dy₂O₃ melts. Dy(III) ions were observed by cyclic voltammetry, square wave voltammetry in melts. X-ray diffraction (XRD) pattern of melts indicated that Dy₂O₃ was chlorinated by MgCl₂ and formed DyCl₃. XRD pattern of non-dissolved residue, which was left after the melts were washed with water to remove the soluble salt, showed that the new compounds (i.e., DyOCl, MgO, and Dy(OH)₃) were produced. The concentration of Dy(III) reached a maximum when the concentration of Mg(II) ions exceeded 8?×?10^?4 mol cm^?3 in melts by inductive coupled plasma atomic emission spectrometer analyses of melts. Galvanostatic electrolysis was conducted to extract Dy element from LiCl–KCl–MgCl₂–Dy₂O₃ melts by forming Mg–Li–Dy alloys. The components of Dy and Li in alloys were controlled within a small range by the concentration of MgCl₂ in melts, current density, and additions of Dy₂O₃. XRD patterns of alloys indicated that Mg₃Dy phase was formed. Scanning electron microscope images with energy-dispersive X-ray spectroscopy showed that Dy elements were mainly distributed in the grain boundary. Grain size was refined, due to a more content of Dy elements in alloys by optical microscopy images.     

Radiation stability of several polymeric supports used for radionuclide transport from nuclear wastes using liquid membranes

In an attempt to evaluate radiation stability of several polymeric materials used as the support in supported liquid membrane studies for the transport of radionuclides from nuclear waste, flat sheets made from polytetrafluoroethylene, polysulfone, polyether sulfone, polyacrylonitrile and polyvinylidenefluoride were irradiated to varying extents using a ⁶⁰Co gamma ray source and subsequently, the transport efficiency of the irradiated flat sheets were evaluated. The membrane integrity was assessed from the transport rates of Am³⁺ from a feed containing 3 M HNO₃ into a receiver phase containing 0.01 M HNO₃ as the strippant while 0.1 M TODGA (N,N,N′,N′-tetraoctyldiglycolamide) + 0.5 M DHOA (di-n-hexyloctanamide) in n-dodecane was used as the carrier extractant. The radiation stability of the membrane filters was evaluated after irradiating them up to 20 MRad absorbed dose in a gamma chamber.     

Gamma radiation and radon levels in Mexico City dwellings

Gamma exposure rate and radon levels were measured in 75 single-family dwellings in Mexico City in order to correlate them with local environment. Radon monitoring was performed both indoors and outdoors using a continuous working level monitor for short-lived radon decay products; the gamma exposure rate was measured using CaSO₄: Dy+PTFE. The results obtained show a log-normal distribution. The mean indoor radon concentration is lower than 45 Bq/m³ and the mean indoor gamma exposure rate was 11.29 R/h.     

Effect of gamma radiation on wheat plant growth due to impact on gas exchange characteristics and mineral nutrient uptake and utilization

The experiment was conducted to determine the effect of gamma radiation on plant growth and development, flag leaf gas exchange characteristics such as net photosynthetic rate (P _N), stomatal conductance (g _s), and transpiration rate (E) and activity of key carbon and nitrogen assimilating enzymes like Rubisco, starch synthase (SS) and nitrate reductase (NR) in field grown wheat. Grains of cultivar PBW-343 were exposed to a ⁶⁰Co (Cobalt-60) gamma source at a dose range from 0 to 500 Gy (Gray). Gas exchange characteristics of flag leaf were measured using Infrared Gas Analyzer (IRGA), while mineral nutrients were analyzed spectrophotometrically. Our results show that an irradiation treatment, in general, caused an improvement in plant growth and yield characteristics such as shoot and root mass, root length and surface area, leaf area and chlorophyll SPAD index, tiller number and grain yield. However, irradiation exceeding 5 Gy reduced the magnitude of radiation advantage for most of the investigated physiological and biochemical traits. No germination was recorded at 500 Gy irradiation dose. A dose-dependant increase in shoot Fe in radiated plants up to 25 Gy reflected its higher plant root to shoot translocation which may yield micronutrient rich grains. At higher dose of 100 Gy, there was a drastic reduction in flag leaf membrane stability index (MSI), photosynthesis, Rubisco, NR, and nutrients like K, P, Mg, Fe, and Zn. Starch synthase enzyme activity was unaffected by gamma irradiation indicating that the negative effect of high dose (100 Gy) on the grain yield were caused by the adverse effect of radiation on the gas exchange attributes particularly photosynthesis, carbon, and nitrogen assimilation efficiency and the plant uptake of mineral nutrients. The study concludes that gamma radiation at a low dose (25 Gy or lower) stimulates, while a high dose (100 Gy and above) inhibits plant growth and development of wheat. The adverse effect at 100 Gy and beyond could be attributed to the poor carbon and nitrogen assimilation efficiency and the plant uptake of mineral nutrients, all of which are the ultimate determinant of plant health.     

A new β-diketonate Dy(III) single‒ion magnet featuring multiple magnetic relaxation processes

Abstract

A β-diketonate mononuclear dysprosium compound, [Dy(TFNB)₃(bpy)] (1) (TFNB = 4,4,4-trifluoro-1-(2-naphthyl)-1,3-butanedione, bpy = 2,2′-bipyridine), has been prepared and structurally and magnetically characterized. X-ray crystallographic analysis reveals that 1 contains two crystallographically equivalent Dy(III) ions of which the eight-coordinate geometries uniformly behave as distorted square antiprismatic configurations (D_4d). Magnetic investigations demonstrate that 1 displays dual relaxation processes of SMMs behavior with the effective barrier (ΔE/k_B) of 23.44 K under 1200 Oe DC field, corresponding to the coexistence of two metal centers in the structure of the compound. The comparative studies of some Dy(III)-based SIMs with TFNB ligand have been conducted as well. Ab initio studies demonstrate that the Kramers doublet ground state is predominantly axial with the g_z tensors of two Dy(III) fragments matching the Ising-limit factor (20) anticipated for the pure M_J = ±15/2 state.     

Statistical assessment of radiological data of tiles collected from Jordan

ABSTRACT

In this present study, activity concentration of natural radionuclides such as ²²⁶Ra, ²³²Th and ⁴⁰K were determined using gamma ray spectrometer based on High Purity Germanium (HPGe) detector in ceramic tiles collected from Jordan. The average activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K were found to be 63.75 ± 24.12, 93.65 ± 13.89 and 180.9 ± 45.69 Bq.kg^?1. respectively. Using activity concentration of ²²⁶R, ²³²Th and ⁴⁰K, the radiological parameters such as radium equivalent activity (Ra_eq), Criteria formula (CF), absorbed dose rate (D_R), annual effective dose rate (H_R), activity utilisation index (AUI), external hazard index (H_ex), international hazard index (H_in), alpha index and gamma index (I_γ) has been calculated to assess the radiation hazards in the Tiles. The calculated average value of all radiological parameters is less than the recommended limit. The calculated values of annual effective dose rate (H_R), show that about 30% of the samples exceeded the recommended limit of 1 mSv.y^?1. Moreover, multivariate statistical techniques such as Pearson correlation, factor and cluster analysis were performed between the radioactive variables to know the existing relation between them.     

Enhancement of 2-chlorophenol photocatalytic degradation in the presence Co<Superscript>2+</Superscript>-doped ZnO nanoparticles under direct solar radiation

The performance of Co²⁺-doped ZnO nanoparticles, prepared using the sol–gel method, for 2-chlorophenol degradation under direct solar radiation was investigated. Various parameters were investigated during the degradation process, namely solar intensity, Co²⁺ ion concentration, loading concentrations of Co²⁺-doped ZnO, and pH. The photocatalytic degradation efficiency increased when the initial concentration of 2-chlorophenol decreased; the optimum concentration was 50 mg/L under similar experimental conditions. Moreover, optimum values, established on a sunny day, were 0.75 wt% of Co²⁺, a 1 g/L loading concentration, and a pH of 6.0, respectively. The highest degradation efficiency observed was 95 %, after only 90 min of solar light irradiation. The mechanism of visible photocatalytic degradation using Co²⁺-doped ZnO was explained as a strong electronic interaction between Co²⁺, Co³⁺ and ZnO, and a promotion in the charge separation, which enhanced the degradation performance. The fragmentation of 2-chlorophenol under the optimal conditions was investigated using HPLC, comparing standards of all intermediate compounds. The pathway of the fragmentation was proposed as involving hydroxyhydroquinone, catechol, and phenol formation, which were then converted to non-toxic compounds such as oxalic acid and acetic acid with further decomposition to CO₂ and H₂O.     

Photoelectrocatalytic degradation of 3-nitrophenol at surface of Ti/TiO2 electrode

The widely utilization of phenol and its derivatives such as 3-nitrophenol (3-NP) has led to the worldwide pollution in the environment. In this study, Ti/TiO₂ photoelectrode was prepared with anodic oxidation of Ti foil electrode and then the photoelectrocatalytic (PEC) degradation of 3-NP was performed via this electrode, comparing with photocatalytic (PC), electrooxidation and direct photolysis by ultraviolet light. A significant photoelectrochemical synergetic effect in 3-NP degradation was observed on the Ti/TiO₂ electrode and rate constant for the PEC process of Ti/TiO₂ electrode was about three times as high as its PC degradation process. 3-NP concentration monitoring was carried out with differential pulse voltammetry. Results showed that PEC degradation has highest effect on concentration decreasing of 3-NP at solution and degraded it about 38 %, while other processes degradation efficiencies were about 4, 7, and 12 % for electrooxidation, direct photolysis and photocatalytic degradation, respectively. Finally, effects of solution pH and applied potential on degradation efficiency were studied and results showed that optimum pH for degradation is equal 4.00 and optimum potential is 1.2 V vs. Ag|AgCl|KCl (3M) reference electrode.     

Optimization of a prompt gamma setup for analysis of environmental samples

A thermal neutron capture-based Prompt Gamma ray Activation Analysis setup has been designed to analyze the elemental concentration of environmental bulk samples using a D(d,n) reaction-based portable neutron generator. The performance of the setup was tested through mercury concentration measurements in Hg-contaminated water samples using a large volume cylindrical bismuth germinate (BGO) gamma ray detector. Excellent agreement of experimental count rate of 2.64, 3.19 + 3.29 and 4.67–5.05 MeV Hg prompt gamma rays with theoretical count rate obtained through Monte Carlo simulations, indicates excellent performance of the newly designed portable neutron generator-based PGNAA setup.     

Statistical Optimization of 1,3-Propanediol (1,3-PD) Production from Crude Glycerol by Considering Four Objectives: 1,3-PD Concentration,Yield, Selectivity,and Productivity

This study investigated the biological conversion of crude glycerol generated from a commercial biodiesel production plant as a by-product to 1,3-propanediol (1,3-PD). Statistical analysis was employed to derive a statistical model for the individual and interactive effects of glycerol, (NH₄)₂SO₄, trace elements, pH, and cultivation time on the four objectives: 1,3-PD concentration, yield, selectivity, and productivity. Optimum conditions for each objective with its maximum value were predicted by statistical optimization, and experiments under the optimum conditions verified the predictions. In addition, by systematic analysis of the values of four objectives, optimum conditions for 1,3-PD concentration (49.8 g/L initial glycerol, 4.0 g/L of (NH₄)₂SO₄, 2.0 mL/L of trace element, pH 7.5, and 11.2 h of cultivation time) were determined to be the global optimum culture conditions for 1,3-PD production. Under these conditions, we could achieve high 1,3-PD yield (47.4%), 1,3-PD selectivity (88.8%), and 1,3-PD productivity (2.1/g/L/h) as well as high 1,3-PD concentration (23.6 g/L).     

Assessment of natural and fallout radioactivity in soil samples of Visakhapatnam

Environmental gamma radiation levels around the new Bhabha Atomic Research Centre site at Visakhapatnam have been assessed. Natural and anthropogenic radionuclide activity concentrations in soil samples collected were determined using high-resolution gamma spectroscopy. Average activity concentrations of ²³⁸U, ²²⁶Ra, ²³²Th and ⁴⁰K were found to be 38, 38, 230 and 520 Bq kg^?1, respectively. No anthropogenic radionuclide except fallout ¹³⁷Cs having mean concentration range ≤ 0.2–2.2 Bq kg^?1 was detected in the soil samples. The observed values are compared with the values reported for different areas in India and other parts of the world. The annual total external gamma radiation dose to the members of public estimated using the above observations ranged from 0.13 to 0.38 mSv y^?1 with an average of 0.25 mSv y^?1.     

Response Surface Methodology Optimization of Melanin Production by <Emphasis Type="Italic">Streptomyces cyaneus</Emphasis> and Synthesis of Copper Oxide Nanoparticles Using Gamma Radiation

Melanin pigment is witnessed to be widely used in medicine, food, cosmetic preparations with strong hydrophobicity. Streptomyces cyaneus is utilized for the synthesis of melanin by optimizing culture conditions through screening of critical factors, by Response Surface Methodology as Plackett–Burman design (P-BD), while further statistical optimization was applied using Central Composite Design (CCD) for maximizing yield. Moreover, the impacts of gamma radiation and alternative frugal l-tyrosine, natural sources were studied as it predicted for remarkable rising in the pigment concentration. Herein unprecedented achievement was realized for melanin pigment production, (9.898 mg/ml) was obtaining by optimized culture condition. Also, 2.0% fava bean’s seed peel maximized melanin (9.953 mg/ml) and hence super-yield (11.113 mg/ml) was produced by a stimulus from gamma irradiation (2.5 kGy). The extracted melanin was confirmed chemically, UV–Vis, and FT-IR analysis. Copper oxide nanoparticles (CuONPs) were synthesized by radiolytic reactions of gamma radiation (30.0 kGy) in the presence of melanin as a capping agent. CuONPs were characterized by UV–Vis, DLS, XRD, and FT-IR. TEM analysis revealed the morphology of monodispersed CuONPs with a mean diameter 29.82 nm. CuONPs exhibited excellent antimicrobial activity against food born Gram-positive, Gram-negative bacteria, and fungi; they can find potential applications for the food packaging approach.     

Gamma radiation effects on molecular characteristic of vegetable tannins

The influence of gamma radiation on tannins extracted from Pinus caribaea bark and on tannin acid has been investigated in this study with the aim of searching for evidences of structural and/or conformational changes. To fulfill this purpose, the samples of tannins, such as tannic acid and P. caribaea tannin bark, were irradiated at different doses (from 5 to 35 kGy) using a cobalt-60 gamma irradiator. The changes were analyzed by a Fourier transform infrared spectrometry and by high resolution liquid chromatography. The results pointed out some structural and conformational changes under the effects of gamma radiation for doses higher than 5 kGy for P. caribaea tannin bark. However, no changes were detected on the irradiated tannic acid. The observed behavior suggests the loss of carbonyl groups. This could be associated to a decarboxylation process with the corresponding release of CO₂ from the molecule. Evidences of some conformational changes were also noted.     

Estimation of uranium in geological rock samples by beta–gamma method and its comparison with pellet fluorimetry method

Geological rock samples collected from Narwapahar uranium mines, UCIL, Jaduguda were analysed for the estimation of uranium concentration (U₃O₈) by beta–gamma method which is a physical technique and same set of samples were analysed by pellet fluorimetry technique which is a chemical technique. 28 samples were analysed by beta–gamma method and values varied between 240 and 2,500 ppm. Samples were analysed by pellet fluorimetry and values varied between 260 and 2,300 ppm. The results obtained were well comparable by both the techniques.     

TL characteristics of Ce3+-doped NaLi2PO4 TLD phosphor

Ce³⁺-doped NaLi₂PO₄ orthophosphate (with different impurity concentrations, i.e., 0.01–0.3 mol%) was prepared by a solid state reaction method. Formation of the material was confirmed using powder X-ray diffraction analysis. TL intensity was found to be the highest for the material having impurity concentration 0.2 mol% after annealing it at around 600 K for 1 h and subsequently quenching to room temperature. A typical glow curve consists of three peaks at around 454, 493 and 570 K (dosimetry peak). Good sensitivity (~8 times more than that of TLD-100), low fading (~15 % in 2 months), low-Z material (Z _eff ≈ 10.8), very wide dose response (i.e., 0.1 Gy–1.0 kGy of γ rays) make the material a ‘good’ thermoluminescent dosimeter (TLD) phosphor suitable for personnel, medical and environmental dosimetry of high-energy radiation using TL. It could also be used during cancer therapy and sterilization of food where high doses are needed to be monitored.     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.