脆性损伤材料裂纹尖端的局部解

本文利用Mazars和Lemaitre提出的混凝土脆性损伤模型,求得了裂纹尖端应力、应变及损伤的局部解.对手Ⅲ型及不可压缩平面应变Ⅰ型裂纹,其尖端场的构造和理想塑性材料相类似.指出由于丧失了应力全连续条件,从而损伤边界不能由局部解定出.     

Higher order fields for damaged nonlinear antiplane shear notch, crack and inclusion problems

Damaged nonlinear antiplane shear problems with a variety of singularities are studied analytically. A deformation plasticity theory coupled with damage is employed in analysis. The effect of microscopic damage is considered in terms of continuum damage mechanics approach. An exact solution for the general damaged nonlinear singular antiplane shear problem is derived in the stress plane by means of a hodograph transformation, then corresponding higher order asymptotic solutions are obtained by reversing the stress plane solution to the physical plane. As example, traction free sharp notch and crack, rigid sharp wedge and flat inclusion, and mixed boundary sharp notch problems are investigated, respectively. Consequently, higher order fields are obtained, in which analytical expressions of the dominant and second order singularity exponents and angular distribution functions of the near tip fields are derived. Effects of the damage and hardening exponents of materials and the geometric angle of notch/wedge on the near tip quantities are discussed in detail. It is found that damage leads to a weaker dominant singularity of stress, but to little stronger singularities of the dominant and second order terms of strain compared to that for undamaged material. It is also seen that damage has important effect on the angular distribution functions of the near tip stress and strain fields. As special cases, higher order analytical solutions of the crack and rigid flat inclusion tip fields are obtained, respectively, by reducing the notch/wedge tip solutions. Effects of damage and hardening exponents on the dominant and second order terms in the solutions of the crack and inclusion tip fields are discussed.     

Intergranular strain evolution near fatigue crack tips in polycrystalline metals

The deformation field near a steady fatigue crack includes a plastic zone in front of the crack tip and a plastic wake behind it, and the magnitude, distribution, and history of the residual strain along the crack path depend on the stress multiaxiality, material properties, and history of stress intensity factor and crack growth rate. An in situ, full-field, non-destructive measurement of lattice strain (which relies on the intergranular interactions of the inhomogeneous deformation fields in neighboring grains) by neutron diffraction techniques has been performed for the fatigue test of a Ni-based superalloy compact tension specimen. These microscopic grain level measurements provided unprecedented information on the fatigue growth mechanisms. A two-scale model is developed to predict the lattice strain evolution near fatigue crack tips in polycrystalline materials. An irreversible, hysteretic cohesive interface model is adopted to simulate a steady fatigue crack, which allows us to generate the stress/strain distribution and history near the fatigue crack tip. The continuum deformation history is used as inputs for the micromechanical analysis of lattice strain evolution using the slip-based crystal plasticity model, thus making a mechanistic connection between macro- and micro-strains. Predictions from perfect grain-boundary simulations exhibit the same lattice strain distributions as in neutron diffraction measurements, except for discrepancies near the crack tip within about one-tenth of the plastic zone size. By considering the intergranular damage, which leads to vanishing intergranular strains as damage proceeds, we find a significantly improved agreement between predicted and measured lattice strains inside the fatigue process zone. Consequently, the intergranular damage near fatigue crack tip is concluded to be responsible for fatigue crack growth.     

ASYMPTOTIC SOLUTIONS OF MODE I STEADY GROWTH CRACK IN MATERIALS UNDER CREEP CONDITIONS

An asymptotic analysis is made on problems with a steady-state crack growth coupled with a creep law model under tensile loads. Asymptotic equations of crack tip fields in creep materials are derived and solved numerically under small scale conditions. Stress and strain functions are adopted under a polar coordinate system. The governing equations of asymptotic fields are obtained by inserting the stress field and strain field into the material law. The crack growth rate rather than fracture criterion plays an important role in the crack tip fields of materials with creep behavior.     

平面幂律塑性Ⅰ型裂纹尖端应力场全解

在航空航天、船舶、石油管道和核电等领域,服役结构或部件在长期极端条件下运行,不可避免地会产生裂纹,因此,为研究含裂纹结构的准静态断裂行为,必须了解裂纹尖端附近区域的应力应变场特点.对于幂律材料裂纹构元,研究平面应变和平面应力条件下Ⅰ型裂纹尖端应力场的解析分布.基于能量密度等效和量纲分析,推导了能量密度中值点代表性体积单元(representative volume element, RVE)的等效应力解析方程,并定义其为应力因子,进而针对有限平面应变和平面应力紧凑拉伸(compact tension, CT)试样和单边裂纹弯曲(single edge bend, SEB)试样,以应力因子作为应力特征量,并构造用于表征裂尖等效应力等值线的蝶翅轮廓式和扇贝轮廓式三角特殊函数,提出描述幂律塑性条件下平面I型裂纹尖端应力场的半解析模型.该半解析模型形式简单,对CT和SEB试样的裂尖应力场的预测结果与有限元分析的结果比较表明,两者之间均密切吻合,模型公式可直接用于预测Ⅰ型裂纹尖端应力分布,方便于断裂安全评价和理论发展.     

Mode I and mode II crack tip asymptotic fields with strain gradient effects

The strain gradient effect becomes significant when the size of fracture process zone around a crack tip is comparable to the intrinsic material lengthl, typically of the order of microns. Using the new strain gradient deformation theory given by Chen and Wang, the asymptotic fields near a crack tip in an elastic-plastic material with strain gradient effects are investigated. It is established that the dominant strain field is irrotational. For mode I plane stress crack tip asymptotic field, the stress asymptotic field and the couple stress asymptotic field can not exist simultaneously. In the stress dominated asymptotic field, the angular distributions of stresses are consistent with the classical plane stress HRR field; In the couple stress dominated asymptotic field, the angular distributions of couple stresses are consistent with that obtained by Huang et al. For mode II plane stress and plane strain crack tip asymptotic fields, only the stress-dominated asymptotic fields exist. The couple stress asymptotic field is less singular than the stress asymptotic fields. The stress asymptotic fields are the same as mode II plane stress and plane strain HRR fields, respectively. The increase in stresses is not observed in strain gradient plasticity for mode I and mode II, because the present theory is based only on the rotational gradient of deformation and the crack tip asymptotic fields are irrotational and dominated by the stretching gradient. The project supported by the National Natural Science Foundation of China (19704100), National Natural Science Foundation of Chinese Academy of Sciences (KJ951-1-20), CAS K.C. Wong Post-doctoral Research Award Fund and Post-doctoral Science Fund of China     

裂尖超钝化:实验、理论与数值模拟

本文报道了在改性聚丙烯裂尖平面应变段发生超钝化的实验发现。利用环向冷拉模型,可说明裂尖超钝化的形成取决于冷拉传播速率与加载率之比。裂尖超钝化可使材料韧性,尤其是冲击韧性的改善,达到一个新的水平。本文在超弹性-粘塑性各向异性损伤的有限变形本构模型下进行了详尽的数值计算。模拟结果成功地再现了裂尖超钝化的基本特征。     

Effect of crack-tip shape on the near-tip field in glassy polymer

The physical nature of a crack tip is not absolutely sharp but blunt with finite curvature. In this paper, the effects of crack-tip shape on the stress and deformation fields ahead of blunted cracks in glassy polymers are numerically investigated under Mode I loading and small scale yielding conditions. An elastic–viscoplastic constitutive model accounting for the strain softening upon yield and then the subsequently strain hardening is adopted and two typical glassy polymers, one with strain hardening and the other with strain softening–rehardening are considered in analysis. It is shown that the profile of crack tip has obvious effect on the near-tip plastic field. The size of near-tip plastic zone reduces with the increase of curvature radius of crack tip, while the plastic strain rate and the stresses near crack tip enhance obviously for two typical polymers. Also, the plastic energy dissipation behavior near cracks with different curvatures is discussed for both materials.     

压缩载荷作用下岩石的细观损伤和塑性研究

建立岩石微裂纹扩展的细观力学模型,研究了岩石的细观损伤和塑性性质.压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的细观损伤,采用应变能密度准则求解复合型断裂的翼裂纹扩展长度,微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映了塑性内变量对硬化函数的影响;建立岩石模型的本构关系及其数值算法,并用回映隐式积分算法编制了模型的本构程序.分析弹塑性损伤模型的围压对岩石损伤的影响,并从围压和短微裂隙长度等因素分析模型的岩石的损伤和宏观塑性特性.     

The near tip stress and strain fields in cracked single crystals

The numerical analyses of stationary mathematically sharp Mode I crack in FCC and BCC crystals with elastic-ideally plastic (EIP) and fast hardening saturation (FHS) law are carried out in the present paper. From the calculated results, it is shown that: for the cases of small strain, EIP crystal cracks, the features of concentrated deformation patterns and the stress state in near-crack tip deformation fields are identical to the earlier analytical solutions, but along the angular sector boundaries, there exist narrow complex stress zones. The overall characteristics of deformation patterns for the cases of EIP and FHS are similar. The behaviours of crack tip opening can be characterized by crack-tip-opening-displacement (CTOD). For the case of FHS, finite deformation BCC crystal crack, our calculations are qualitatively in agreement with recent experimental observations. The project supported by National Natural Science Foundation of China     

考虑微裂纹相互作用的的岩石微观力学弹塑性损伤模型研究

本文建立基于微裂纹扩展的岩石弹塑性损伤微观力学模型。用自洽方法考虑裂隙间相互影响,压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的微观损伤,基于应变能密度准则用Newton迭代法求复合型断裂的翼裂纹扩展长度,并采用微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映塑性内变量对硬化函数的影响;建立岩石的弹塑性损伤本构关系及其数值算法,并用回映隐式积分算法编制了弹塑性损伤模型的程序。从围压和微裂隙长度等因素分析弹塑性损伤模型的岩石的损伤和宏观塑性特性。     

Finite deformation analysis of crack tip fields in plastically compressible hardening–softening–hardening solids

Crack tip fields are calculated under plane strain small scale yielding conditions. The material is characterized by a finite strain elastic–viscoplastic constitutive relation with various hardening–softening–hardening hardness functions. Both plastically compressible and plastically incompressible solids are considered. Displacements corresponding to the isotropic linear elastic mode I crack field are prescribed on a remote boundary. The initial crack is taken to be a semi-circular notch and symmetry about the crack plane is imposed. Plastic compressibility is found to give an increased crack opening displacement for a given value of the applied loading. The plastic zone size and shape are found to depend on the plastic compressibility, but not much on whether material softening occurs near the crack tip.On the other hand, the near crack tip stress and deformation fields depend sensitively on whether or not material softening occurs. The combination of plastic compressibility and softening(or softening–hardening) has a particularly strong effect on the near crack tip stress and deformation fields.     

Crack tip superblunting: experiment,theory and numerical simulation

Experimental revelation ofsuperblunting along plane strain predominant crack tip segment is reported here for modified polyproplene. As elucidated by a heuristic model of progressive circumferential cold-draw, the formation of superblunting crack tip depends critically on the ratio between the cold-draw propagation speed and the loading speed, and contributes significantly to the material toughening, especially for the improvement in impact toughness. Detailed numerical calculations are conducted based on a hyperelastic-viscoplastic and anisotropic damage constitutive model at finite deformation. The simulated results recapitulate the essential features of crack tip superblunting. The project supported by the National Natural Science Foundation of China     

温度变化对热压电介质裂纹尖端力电损伤的影响分析

由连续介质损伤力学的基本理论出发,引入力电损伤变量并建立了一个热压电介质断裂的损伤本构模型.再由虚功原理导出了求解这类含损伤的关于热力电耦合问题的有限元方程.通过数值计算,分析了温度改变对裂纹尖端力电损伤的影响规律.     

Wedge indentation into elastic-plastic single crystals, 1: Asymptotic fields for nearly-flat wedge

Asymptotic stress and deformation fields under the contact point singularities of a nearly-flat wedge indenter and of a flat punch are derived for elastic ideally-plastic single crystals with three effective in-plane slip systems that admit a plane strain deformation state. Face-centered cubic (FCC), body-centered cubic (BCC), and hexagonal-close packed (HCP) crystals are considered. The asymptotic fields for the flat punch are analogous to those at the tip of a stationary crack, so a potential solution is that the deformation field consists entirely of angular constant stress plastic sectors separated by rays of plastic deformation across which stresses change discontinuously. The asymptotic fields for a nearly-flat wedge indenter are analogous to those of a quasistatically growing crack tip fields in that stress discontinuities can not exist across sector boundaries. Hence, the asymptotic fields under the contact point singularities of a nearly-flat wedge indenter are significantly different than those under a flat punch. A family of solutions is derived that consists entirely of elastically deforming angular sectors separated by rays of plastic deformation across which the stress state is continuous. Such a solution can be found for FCC and BCC crystals, but it is shown that the asymptotic fields for HCP crystals must include at least one angular constant stress plastic sector. The structure of such fields is important because they play a significant role in the establishment of the overall fields under a wedge indenter in a single crystal. Numerical simulations—discussed in detail in a companion paper—of the stress and deformation fields under the contact point singularity of a wedge indenter for a FCC crystal possess the salient features of the analytical solution.     

The role of macroscopic hardening and individual length-scales on crack tip stress elevation from phenomenological strain gradient plasticity

This paper quantifies the effect of strain gradient plasticity (SGP) on crack tip stress elevation for a broad range of applied loading conditions and constitutive model parameters, including both macroscopic hardening parameters and individual material length-scales controlling gradient effects. Finite element simulations incorporating the Fleck-Hutchinson SGP theory are presented for an asymptotically sharp stationary crack. Results identify fundamental scaling relationships describing (i) the physical length-scales over which strain gradients are prominent, and (ii) the degree of stress elevation over conventional Hutchinson-Rice-Rosengren (HRR) fields. Results illustrate that the three length-scale theory predicts much larger SGP effects than the single length-scale theory. Critically, the first length-scale parameter dominates SGP stress elevation: this suggests that SGP effects in fracture can be predicted using the length-scales extracted from nanoindentation, which exhibits similar behavior. Transitional loading/material parameters are identified that establish regimes of SGP relevance: this provides the foundation for the rational application of SGP when developing new micromechanical models of crack tip damage mechanisms and associated subcritical crack propagation behavior in structural alloys.     

Effects of characteristic material lengths on mode III crack propagation in couple stress elastic–plastic materials

The asymptotic fields near the tip of a crack steadily propagating in a ductile material under Mode III loading conditions are investigated by adopting an incremental version of the indeterminate theory of couple stress plasticity displaying linear and isotropic strain hardening. The adopted constitutive model is able to account for the microstructure of the material by incorporating two distinct material characteristic lengths. It can also capture the strong size effects arising at small scales, which results from the underlying microstructures. According to the asymptotic crack tip fields for a stationary crack provided by the indeterminate theory of couple stress elasticity, the effects of microstructure mainly consist in a switch in the sign of tractions and displacement and in a substantial increase in the singularity of tractions ahead of the crack-tip, with respect to the classical solution of LEFM and EPFM. The increase in the stress singularity also occurs for small values of the strain hardening coefficient and is essentially due to the skew-symmetric stress field, since the symmetric stress field turns out to be non-singular. Moreover, the obtained results show that the ratio η introduced by Koiter has a limited effect on the strength of the stress singularity. However, it displays a strong influence on the angular distribution of the asymptotic crack tip fields.     

Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries

Plastic heterogeneities of hexagonal close-packed (HCP) materials are numerically investigated at the grain level. Intensive use of parallel Finite Elements computations enables us to study micro-plasticity of realistic 3D multicrystalline aggregates, including, macroscopic mechanical responses but also average responses in each grain and particularly local stress and strain fields. This paper focuses on three applications of this simulation method. The first part of this paper is devoted to a fine analysis of micro-plasticity of HCP materials. Intergranular but also intragranular stress and strain heterogeneities are described and micro-plasticity patterns are displayed throughout the 3D microstructures. A special attention is paid to the sensitivity of simulations with respect to the mesh discretization, the element interpolation and the geometrical representation of grain boundaries, in terms of macroscopic and local responses. Later, a simplified homogenization method is evaluated, regarding results of the first part. Afterwards, this method is applied with a zirconium alloy to identify a set of coefficients for a single crystal plasticity model. Finally, in order to provide critical information for intergranular damage phenomena (reported in literature for zirconium alloys), the third part provides a statistical analysis of over-stresses at grain boundaries.     

ANALYSIS OF DAMAGE NEAR A CONDUCTING CRACK IN A PIEZOELECTRIC CERAMIC

The finite element formulation for analyzing static damage near a conducting crack in a thin piezoelectric plate is established from the virtual work principle of piezoelectricity. The damage fields under various mechanical and electrical loads are calculated carefully by using an effective iterative procedure. The numerical results show that all the damage fields around a crack tip are fan-shaped and the electric field applied has great influence on the mechanical damage,which is related to the piezoelectric properties.     

Field structure at mode III dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.