Effect of graphene nanosheet addition on the electrochemical performance of anode materials for lithium-ion batteries

The structure and electronic properties of graphene nanosheet (GNS) render it a promising conducting agent in a lithium-ion battery. A graphite electrode loaded with GNS exhibits superior electrochemical properties including higher rate performance, increased specific capacity and better cycle performance compared with that obtained by adding the traditional conducting agent–acetylene black. The high-quality sp² carbon lattice, quasi-two-dimensional crystal structure and high aspect ratio of GNS provide the basis for a continuous conducting network to counter the decrease in electrode conductivity with increasing number of cycles, and guarantee efficient and fast electronic transport throughout the anode. Effects of GNS loading content on the electrochemical properties of graphite electrode are investigated and results indicate that the amount of conductive additives needed is decreased by using GNS. The kinetics and mechanism of lithium-storage for a GNS-loaded electrode are explored using a series of electrochemical testing techniques.     

Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries

Graphene nanosheets (GNSs) were prepared from artificial graphite by oxidation, rapid expansion and ultrasonic treatment. The morphology, structure and electrochemical performance of GNSs as anode material for lithium-ion batteries were systematically investigated by high-resolution transmission electron microscope, scanning electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy and a variety of electrochemical testing techniques. It was found that GNSs exhibited a relatively high reversible capacity of 672 mA h/g and fine cycle performance. The exchange current density of GNSs increased with the growth of cycle numbers exhibiting the peculiar electrochemical performance.     

Graphene anchored with ZnFe2O4 nanoparticles as a high-capacity anode material for lithium-ion batteries

Heterostructured ZnFe₂O₄–graphene nanocomposites are synthesized by a facile hydrothermal method. The as-prepared ZnFe₂O₄–graphene nanocomposites are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis and galvanostatic charge and discharge measurements. Compared with the pure ZnFe₂O₄ nanoparticles, the ZnFe₂O₄–graphene nanocomposites exhibit much larger reversible capacity up to 980 mAh g⁻¹, greatly improved cycling stability, and excellent rate capability. The superior electrochemical performance of the ZnFe₂O₄–graphene nanocomposites could be attributed to the synergetic effect between the conducting graphene nanosheets and the ZnFe₂O₄ nanoparticles.     

Influence of graphene oxide on electrochemical performance of Si anode material for lithium-ion batteries

We have developed a Si/graphene oxide electrode synthesized via ultrasonication-stirring method under alkaline condition. Scanning electron microscopy(SEM), transmission electron microscope(TEM), EDS dot-mapping and high-resolution transmission electron microscopy(HRTEM) results show that Si particles are evenly dispersed on the graphene oxide sheets. The electrochemical performance was investigated by galvanostatic charge/discharge tests at room temperature. The results revealed that Si/graphene oxide electrode exhibited a high reversible capacity of 2825 mAh/g with a coulombic efficiency of 94.6%at 100 mA/g after 15 cycles and a capacity retention of 70.8% after 105 cycles at 4000 mA/g. These performance parameters show a great potential in the high-performance batteries application for portable electronics, electric vehicles and renewable energy storage.     

Pb-sandwiched nanoparticles as anode material for lithium-ion batteries

A sandwiched SiC@Pb@C nanocomposite was prepared through a simple ball-milling route and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The SiC@Pb@C nanocomposite exhibits a much improved reversible capacity and cycling life as compared with a bare Pb anode. A reversible volumetric capacity of >1,586 mAh cm⁻³ (207 mAh g⁻¹) can be maintained after 600 cycles of charge and discharge in the potential interval between 0.005 and 1.0 V, which far exceeds those reported previously in the literature. The enhanced electrochemical performance is ascribed to the sandwiched structure in which nanosized Pb particles were anchored in between the rigid SiC core and the outer carbon shell, mitigating the damage done by the large volume change of the Pb interlayer during the alloying/dealloying process.     

Superior cycle performance of Sn@C/graphene nanocomposite as an anode material for lithium-ion batteries

A novel anode material for lithium-ion batteries, tin nanoparticles coated with carbon embedded in graphene (Sn@C/graphene), was fabricated by hydrothermal synthesis and subsequent annealing. The structure and morphology of the nanocomposite were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The size of the Sn@C nanoparticles is about 50-200 nm. The reversible specific capacity of the nanocomposite is ∼662 mAh g⁻¹ at a specific current of 100 mA g⁻¹ after 100 cycles, even ∼417 mAh g⁻¹ at the high current of 1000 mA g⁻¹. These results indicate that Sn@C/graphene possesses superior cycle performance and high rate capability. The enhanced electrochemical performances can be ascribed to the characteristic structure of the nanocomposite with both of the graphene and carbon shells, which buffer the volume change of the metallic tin and prevent the detachment and agglomeration of pulverized tin.     

Cobalt oxide–graphene nanocomposite as anode materials for lithium-ion batteries

Composites of Co₃O₄/graphene nanosheets are prepared and characterized by X-ray diffraction and scanning electron microscopy. Their electrochemical behavior as anode materials of lithium-ion rechargeable batteries is investigated by galvanostatic discharge/charge measurements and cyclic voltammetry. The composite is composed of Co₃O₄ nanorods (around 20–40 nm in diameter) and nanoparticles (around 10 nm in diameter) distributed within the graphene matrix. The specific capacity of the composite is higher than both Co₃O₄ and graphene nanosheets. The cycling stability of Co₃O₄ is obviously enhanced by compositing with graphene. After 100 cycles, the discharge and charge capacity of the composite is 1,005 and 975 mAh g⁻¹, respectively, and the irreversible capacity loss is less than 3%.

     

Ultrafine SnSSe/multilayer graphene nanosheet nanocomposite as a high-performance anode material for potassium-ion half/full batteries

Layer-structured SnSSe attracts much attention as an anode material for potassium storage due to its large theoretical capacity.Unfortunately,their practical ap...     

Iron sulfide-embedded carbon microsphere anode material with high-rate performance for lithium-ion batteries

Iron sulfide-embedded carbon microspheres were prepared via a solvothermal process and show high specific capacity and excellent high-rate performance as anode material for lithium-ion batteries.     

Graphene anchored with mesoporous NiO nanoplates as anode material for lithium-ion batteries

Graphene is an excellent substrate to load nanomaterials for energy applications due to its large surface area, excellent conductivity, mechanical strength, and chemical stability. In this study, thermal exfoliated functionalized graphene sheets with good conductivity and high BET surface area are anchored with mesoporous NiO nanoplates by in situ chemical synthesis approach. Electrochemical characterization shows that functionalized graphene sheets–NiO sample exhibits a high capacity of about 700 mAh/g at a discharge current density of 100 mA/g and a good cycling ability. The high capacity and good cycling ability of functionalized graphene sheets –NiO material were attributed to the intimate interaction between the graphene sheets and NiO nanoplates. The graphene sheets not only enhance the conductivity of NiO nanoplates but also improve the structure stability of NiO nanoplates. Furthermore, the mesoporous structure of NiO nanoplates is available to the transfer of electrolyte. Such functionalized graphene sheets–NiO nanocomposite could be a promising candidate material for a high-capacity, low cost, and nontoxic anode for lithium-ion batteries.     

Cycling parameters of MAG graphite as anode material for lithium-ion batteries

Integrated analysis of the cycling parameters (reversible specific capacity, Coulomb efficiency, irreversible loss of cycle capacity, accumulated irreversible capacity, and retention of reversible capacity) of synthetic graphite of MAG brand as an active material for the negative electrode of lithium-ion batteries was made.     

Sodium-based dual-ion batteries via coupling high-capacity selenium/graphene anode with high-voltage graphite cathode

Dual ion batteries(DIBs) exhibit broad application prospects in the field of electrical energy storage(EES)devices with excellent properties,such as high voltage,high energy density,and low cost.In the graphitebased DIBs,high voltage is needed to store enough anions with the formation of anion intercalation compound XC_n(X=AlCl₄^-,PF₆^-,TFSI^-,etc.).Hence,it is difficult for graphite-based DIBs to match proper anodes and electrolytes....     

Intrinsic characteristics of cathode and anode materials for lithium-ion batteries

Fundamental aspects of solving the problem of how the working capacity of lithium-ion batteries in prolonged cycling can be raised and the basic tendencies in the relationship between the intrinsic parameters of active materials of various brands and the electrochemical behavior of anodes and cathodes fabricated from these materials are considered.     

Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries

A tin oxide-titanium oxide/graphene (SnO₂-TiO₂/G) ternary nanocomposite as high-performance anode for Li-ion batteries was prepared via a simple reflux method. The graphite oxide (GO) was reduced to graphene nanosheet, and the SnO₂-TiO₂ nanocomposites were evenly distributed on the graphene matrix in the SnO₂-TiO₂/G nanocomposite. The as-prepared SnO₂-TiO₂/G nanocomposites were employed as anode materials for lithium-ion batteries, showing an outstanding performance with high reversible capacity and long cycle life. The composite delivered a superior initial discharge capacity of 1,594.6 mAh g^?1 and a reversible specific capacity of 1,500.3 mAh g^?1 at a current density of 100 mA g^?1. After 100 cycles, the reversible discharge capacity was still maintained at 1,177.4 mAh g^?1 at a current density of 100 mA g^?1 with a high retained rate of reversible capacity of 73.8 %. The addition of small amount of TiO₂ nanoparticles improved the cycling stability and specific capacity of SnO₂-TiO₂/G nanocomposite, obviously. The results demonstrate that the SnO₂-TiO₂/G nanocomposite is a promising alternative anode material for practical Li-ion batteries.     

Silicon nanotube anode for lithium-ion batteries

This work describes a promising strategy for large-scale fabrication of silicon (Si) nanotubes. The process began with preparation of silica nanotubes using rod-like NiN₂H₄ as a template and the resulting silica nanotubes were then converted to Si nanotubes by a thermal reduction process assisted with magnesium powder. The electrochemical properties of Si nanotubes were investigated as anode of lithium-ion batteries. It was demonstrated that the as-developed Si nanotubes showed significantly improved rate capability and long-term cycling performance compared with commercial silicon meshes.     

First-principles studies on doped graphene as anode materials in lithium-ion batteries

Using density functional theory computations, we investigated Li adsorption, diffusion, and desorption in pristine, B- or N-doped graphene. Compared with pristine graphene, B-doping significantly enhances Li adsorption, whereas Li adsorption is slightly weakened on N-doped graphene, which should be attributed to the different electronic structures due to doping. Li diffusion on various graphene systems was also computed through nudged elastic band method, and the results revealed that Li diffusion on N-doped graphene is faster than on pristine and B-doped graphene. Moreover, for Li desorption from the graphene substrate, N-doped graphene showed the lowest desorption barrier. Our results are in agreement with recent experimental reports and also demonstrate that N-doped graphene is a promising anode material with high-rate charge/discharge ability for Li-ion batteries.     

Electrospun tin-carbon nanocomposite as anode material for all solid state lithium-ion batteries

Journal of Solid State Electrochemistry - All-solid-state batteries represent the next generation of electrochemical energy storage systems. A tin-carbon nanocomposite material is prepared by the...     

Flower-like SnO2 nanoparticles grown on graphene as anode materials for lithium-ion batteries

Tin oxide (SnO₂)/graphene composite was synthesized from SnCl₂?·?2H₂O and graphene oxide (GO) by a wet chemical-hydrothermal route. The GO was reduced to graphene nanosheet (GNS) and flower-like SnO₂ nano-crystals with size about 40 nm were homogeneously distributed on the surface of GNS. The SnO₂/graphene composites delivered a superior first discharge capacity of 1941.9 mAhg^?1 with a reversible capacity of 901.7 mAhg^?1 at the current density of 100 mAg^?1. Moreover, even at higher densities of 200 and 500 mAg^?1, the SnO₂/graphene composite still maintained enhanced cycling stability. After 40 cycles, the discharge capacity was still maintained at 691.1 mAhg^?1 at the current density of 100 mAg^?1. The SnO₂/graphene composite displayed an outstanding Li-battery performance with large reversible capacity and enhanced rate performance, which can be attributed to the highly uniform distribution of SnO₂ nanoparticles and high reduction degree of graphene. This result strongly indicates that the SnO₂/graphene composite was a promising anode material in high-performance lithium-ion batteries.     

Reticular Sn nanoparticle-dispersed PAN-based carbon nanofibers for anode material in rechargeable lithium-ion batteries

Reticular tin nanoparticle-dispersed carbon (Sn/C) nanofibers were fabricated by stabilization of electrospun SnCl₄/PAN composite fibers and subsequent carbonization at different temperatures. These Sn/C composite nanofibers used as anode materials for rechargeable lithium-ion batteries (LIBs) show that the Sn/C nanofibers at 700 and 850 °C present much higher charge (785.8 and 811 mA h g^?1) and discharge (1211.7 and 993 mA h g^?1) capacities than those at 550 and 1000 °C and the as-received CNFs at 850 °C, corresponding to coulombic efficiencies of 64.9% and 81.7%, respectively. The superior electrochemical properties of the intriguing Sn/C nanofibers indicate a promising application in high performance Li-ion batteries.