Chemistry of Phosphorus Ylides. Part 34 Synthesis of Chromenone Phosphanylidene and Cyclobutylidene Derivatives

Abstract

The reaction of nucleophilic phosphacumulene ylides with visnaginone and khellinone afforded the corresponding phosphanylidene and furochromene derivatives. Moreover, pyranochromenes were obtained from the reaction of chromene carbaldehydes with phosphacumulenes. On the other hand, the phosphanylidene-cyclobutylidenes and their dimers were produced from the reaction of furochromene carbaldehydes with the same phosphonium reagents.     

New synthesis of multisubstituted cyanocyclopropanes by the intramolecular SN2 alkylation and 1,3-CC insertion reaction of magnesium carbenoids as the key reactions

Addition reaction of 1-chlorovinyl p-tolyl sulfoxides derived from ketones and aldehydes with lithium α-cyano carbanions gave nitrile adducts in high to quantitative yields. Treatment of the nitrile adducts derived from acetonitrile with excess i-PrMgCl in THF resulted in the formation of cyanocyclopropanes via the intramolecular S_N2 alkylation of the generated magnesium carbenoids. The intermediate of this reaction was proved to be a cyclopropylmagnesium chloride and was reactive with electrophiles to give multisubstituted cyanocyclopropanes. On the other hand, the reaction of the nitrile adducts derived from arylacetonitriles with i-PrMgCl resulted in the formation of 2-arylcyanocyclopropanes by the 1,3-carbon–carbon (1,3-CC) insertion reaction of the generated magnesium carbenoid intermediates. This reaction was found to proceed in a highly stereospecific manner. The key reactions, intramolecular S_N2 alkylation and 1,3-CC insertion reaction of the magnesium carbenoids, are the first examples for the reaction of the magnesium carbenoids bearing a nitrile functional group.     

Chiral base-catalyzed aldol reaction of trimethoxysilyl enol ethers: effect of water as an additive on stereoselectivities

An aldol reaction of trimethoxysilyl enol ether catalyzed by lithium binaphtholate is described. The aldol reaction of trimethoxysilyl enol ether derived from cyclohexanone under anhydrous conditions predominantly afforded the anti-aldol adduct with moderate enantioselectivity, whereas the reaction under aqueous conditions predominantly resulted in the syn-adduct and the enantioselectivity of the syn-adduct was considerably improved. The best enantioselectivity was obtained in the reaction of trimethoxysilyl enol ether derived from 1-indanone with cyclohexanecarboxaldehyde (97% ee (syn)). This is the first example of an aldol reaction of trimethoxysilyl enol ether catalyzed by a chiral base.     

Interaction of Mannich bases with triethyl phosphite

Conclusions A study of the kinetics of the reaction of aliphatic ketone Mannich bases with acetic acid indicated that this reaction is a reaction of elimination of vinyl ketone from a salt of the base with the acid and is a first-order reaction.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 825–828, April, 1969.     

Diels-Alder reaction of maldoxin with an isopropenylallene

The Diels-Alder reaction of maldoxin with an isopropenylallene at 60-75 °C afforded an adduct closely related to chloropestolide A (24%) and a second adduct (0-11%) that underwent an ene reaction to generate the chloropupukeanolide D (11-22%) skeleton. The Diels-Alder reaction occurred with good selectively (>5:1) from a single face of maldoxin under much milder conditions than previously reported for the analogous dimethoxycyclohexadienone. Furthermore, the ene reaction took place under mild conditions, whereas the analogous Diels-Alder adduct from the dimethoxycyclohexadienone did not undergo an ene reaction.     

Effect of the reaction temperature on the transglycosylation reactions catalyzed by the cyclodextrin glucanotransferase from Bacillus macerans for the synthesis of large-ring cyclodextrins

The synthesis of cyclodextrins with from 6 to more than 50 glucose units by cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19) from Bacillus macerans was investigated. Analysis of the synthesized cyclic α-1,4-glucan products showed that a higher yield of large-ring cyclodextrins were obtained with a reaction temperature of 60 °C compared to 40 °C. The yield of large-ring cyclodextrins obtained at 60 °C represented about 50% of the total glucans employed in the reaction. Analysis of the cyclodextrin-forming cyclization reaction and of the coupling reaction of the CGTase resulting in the degradation of mainly the larger cyclic α-1,4-glucans indicated higher rates of the cyclization reaction at 60 °C compared to 40 °C while the opposite was found for the coupling reaction.     

Reaction of trifluororacemic acid methyl ester with 1,3-dienes

The reaction of trifluororacemic acid with 1,3-dienes affords Diels-Alder reaction products in a high yield and with a high degree of specificity. Catalysis by SnCl₄ changes the course of the reaction of the ester with isoprene, affording an ene reaction product.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 141–145. January, 1991.     

An Improved Liquid-Phase Synthesis of Simple Alkylpyridines

The synthesis of pyridines from mixtures of aldehydes or ketones NH₃ in the liquid phase has been reinvestigated, using continuous dosage of the carbonyl components to the reaction mixture. The main product from the reaction of acetaldehyde and formaldehyde is 3-methylpyridine ( 6 ), which is also the main product from the reaction of acrolein or a mixture of crotonaldehyde and formaldehyde under the same conditions. The reaction of other aldehydes with formaldehyde give 3,5-dialklypyridines, e.g. 10, 16 . Acetone reacts with either formaldehyde or acetaldehyde to give polysubstituted alkylpyridines. A mechanistic pathway is proposed which accounts for the formation of the observed products.     

Designing a safer process for the reaction of TFA with sodium borohydride in THF by calorimetric technique

Reaction of TFA with sodium borohydride in THF is a loss of thermal control involving the evolution of Hydrogen gas. The investigation of the process by RC1e and ARSST showed that the criticality class of the reaction is dependant on the addition of TFA. Heat of reaction (Q _r), adiabatic temperature rise (ΔT _ad), and MTSR data are obtained from RC1e experiment. Exothermic onset temperature, Pressure rise, and self heat rate data are obtained from ARSST experiments. The correlation of these data was utilized to define the criticality class of the reaction under different conditions. The reaction with uncontrolled addition of TFA falls in the undesirable criticality class 5. Vent size data are obtained from the adiabatic calorimeter for undesirable reaction. The criticality class can be changed to class 2 with controlled addition. Accordingly, interlock system to control the undesired reaction and appropriate vent relief system are provided.     

Reactions of O-methyl o-quinone monoximes with methyl-, methylene- and methine- substituted aromatic compounds. Synthesis of benzo[d]oxazole and 1,4-benzoxazine derivatives

O-Methyl o-quinone monoxime 1 reacts thermally with compounds 2a-d or 6a,b or 7a,b to give mainly the corresponding 2-substituted phenanthroxazoles 3a-c and 8 . The reaction of 1 with aromatic methylene compounds lOa-c affords the ketones 13a-c in moderate to high yields. Similar products are also obtained from the reaction of monoximes 15a,b with some of the above reactants. The unexpected products 5 and 20 are obtained from the reaction of 1 with 2-methylimidazole ( 2d ) and with phenyloxirane ( 19 ) respectively, while the 4H-1,4-oxazine derivative 23 is obtained from the reaction of 1 with indene ( 21 ).     

Kinetics of heterogeneous cellulose reactions. I. Cyanoethylation of cotton cellulose

Sakurada's equation and fundamental kinetic laws were applied to the heterogeneous cyanoethylation of cellulose, performed by reacting fiber with liquid acrylonitrile, with sodium hydroxide as the catalyst. The data fit Sakurada's equation better at higher temperatures; deviation occurs at the initial stage, and the rate of reaction falls abruptly at a later stage. The degree of substitution at which the abrupt rate change occurred decreased as the temperature increased from 31 to 60°C. and also as the crystallinity of the fiber decreased. Diluting the reagent with different solvents decreased the rate of reaction and changed its transition points, but did not change the essential nature of the reaction, each segment of which fits Sakurada's equation very well. A uniform distribution of the catalyst (sodium hydroxide) throughout the fiber was attempted, and then the reaction was studied at 50°C. Diffractograms of the samples provided further evidence that the position of the rate change is associated with the change of cellulose (I) crystalline structure. Approximate energy of activation has been calculated, from the specific rate constants, between 31 and 40°C. as 10.6 kcal. and between 45 and 50°C. as 16.7 kcal. At other temperatures the determination was handicapped, due to temperature dependence of the order of reaction. An empirical relation between the constants of Sakurada's equation and the reaction temperature has been sought and correlated with the Arrhenius equation. Energies of activation, determined from this relationship, have been found to be very close to the above values. The change of order of reaction with temperature suggests that the reaction is affected by diffusion and the mechanism is interpreted as a diffusion-controlled reaction where hydrogen bonds play a significant role in diffusion.     

Ab initio Mechanism Study on the Reaction of Chlorine Atom with Formic Acid

The potential energy surface(PES) for the reaction of Cl atom with HCOOH is predicted using ab initio molecular orbital calculation methods at UQCIDS(T,full)6-311 G(3df,2p)//UMP2(full)/6-311 G(d,P) level of theory with zero-point vibrational energy (ZPVE) correction.The calculated results show that the reaction mechanism of Cl atom with formic acid is a C-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom with a 3.73kJ/mol reaction barrier height,leading to the formation of cis-HOCO radical which will reacts with Cl atom or other molecules in such a reaction system.Because the reaction barrier height of O-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom which leads to the formation of HCO2 radical is 67.95kJ/mol,it is a secondary reaction channel in experiment,This is in good agreement with the prediction based on the previous experiments.     

New synthesis of allylidenecyclobutanes by the reaction of cyclobutylmagnesium carbenoids with vinyl sulfones

The reaction of cyclobutylmagnesium carbenoids, which were generated from 1-chlorocyclobutyl p-tolyl sulfoxides with EtMgCl via the sulfoxide-magnesium exchange reaction at low temperature, with carbanions derived from vinyl sulfones with n-BuLi or LDA resulted in the formation of allylidenecyclobutanes in moderate to good yields. The actual reactive species of the sulfones in this reaction were proved to be the lithium α-sulfonyl carbanion of allyl sulfones derived from the vinyl sulfones by double bond migration with the bases used. Mono- and di-substituted allylidenecyclobutanes can be obtained by using a variety of vinyl sulfones.     

Modulable and Highly Diastereoselective Carbometalations of Cyclopropenes

The copper‐catalyzed carbomagnesiation reaction of cyclopropenyl esters 1 leads to various substituted cyclopropanes species 3 in good yields with very high diastereoselectivities. The reaction proceeds through a syn‐chelated carbomagnesiation reaction and could be extended to various cyclopropenylmethyl ester derivatives 5 . The potential of this approach was illustrated by the preparation of two consecutive all‐carbon quaternary stereocenters. However, the carbometalation reaction needs to be performed at temperature ranging from ?35 to ?20 °C to avoid subsequent fragmentation reaction into stereodefined β,γ‐nonconjugated unsaturated esters 4 . Alternatively, the carbocupration reaction with organocopper species could also be performed to leads to configurationally stable cyclopropyl copper species 2[Cu] . Additionally, when the Lewis acid character of the copper center is decreased (i.e., RCuCNLi), the reaction proceed with an anti‐selectivity. The diastereodivergent behavior of these organometallic species is of synthetic interest, since both diastereomers syn‐ 3 and anti‐ 3 can be obtained, at will, from the same precursor cyclopropenyl esters 1 .     

Microwave assisted synthesis of dihydropyrrole by AgOAc catalyzed intramolecular cyclization reaction of homopropargyl amine

A series of 5-aryl dihydropyrrole was synthesized from the intramolecular cyclization reaction of homopropargyl amine in the presence of AgOAc as catalyst under microwave irradiation reaction conditions. The homopropargyl amine was prepared by the reaction of propargyl bromide with N-tosyl aldimine under a sonochemical Barbier-type reaction condition. Further aromatization reaction of 5-aryl dihydropyrrole in KOtBu/DMSO can afford 2-aryl pyrrole under microwave irradiation reaction conditions.     

Synthesis of 1,3-dialkylurea from ethylene carbonate and amine using calcium oxide

Several basic metal oxide catalysts were tested for the synthesis of 1,3-disubstituted urea from ethylene carbonate (EC) and amine. Among the catalysts used, CaO has been found to be an excellent recyclable catalyst for the reaction. It has been suggested that strongly basic property of CaO results in its high activity. Disubstituted ureas are obtained from propylamine and butylamine with high yields at 100 °C. Slightly higher reaction temperatures are necessary for obtaining good yields from amines having larger molecular weights and urea is not produced from dibutylamine as a secondary amine. Propylene carbonate can be used instead of EC for the reaction. A reaction mechanism was proposed, which involves reaction between EC and amine giving a carbamate followed by catalytic reaction between the carbamate and amine, yielding 1,3-disubstituted urea. It is suggested that the latter reaction is the rate-determining step. On the basis of this reaction mechanism, the synthesis of unsymmetric urea was also examined. 2-Hydroxyethyl butylcarbamate is selectively produced from EC with butylamine in the absence of the catalyst at a low temperature and reacts with benzylamine producing 1-butyl-3-benzylurea along with symmetric dialkyl ureas.     

Influence of reaction conditions on products of the Pictet-Spengler condensation

The Pictet-Spengler reaction with N-protected α-amino aldehydes was found to be very sensitive to reaction conditions. The outcome of the reaction can be controlled mainly by choice of solvent. Tetrahydro-β-carbolines were obtained in apolar solvents, while in polar media octahydro-bipyrroloindoles were the main compounds. Temperature, amount of acid and reaction time also influenced the final results of the PS reaction. Depending on conditions, products with opposite configuration of stereogenic centre, descended from amino aldehydes, were formed as byproducts.     

Investigation of reaction products of sulphuric acid with ilmenite

The reaction of sulphuric acid with titanium raw materials runs violently with simultaneous emission of gases. Such run of reaction creates danger of explosion. This process is very complicated from the reason of complexity of reactions and variety of compounds in reaction mixture. To determine safe conditions of reaction with high efficiency, it is necessary to investigate phase composition products of reaction. Products of reaction were investigated by using X-ray diffraction. However reaction products show high amorphy and this is the reason of difficulties to determine all phases. For this reason also was used additional method — ‘drop’ calorimeter. This method is used for determination of average specific heat of liquid or solid samples. In this case, this method was used for verification of phase composition of products of reaction. On the basis of investigation the phase composition of reaction product is following: titanyl sulfate, iron(III) sulfate, monohydrated iron(II) sulfate, magnesium sulfate and unreacted remainders of ilmenite and magnesium silicate.     

Synthesis of cis-2,6-tetrahydropyran-4-one via diastereoselectively intramolecular cyclization of β-hydroxy allyl ketone

A series of cis-2,6-tetrahydropyran-4-ones was synthesized from the intramolecular cyclization reaction of β-hydroxy allyl ketones in the presence of Me₃SiOTf as catalyst. The β-hydroxy allyl ketone was prepared from allylation reaction with β-hydroxynitrile without protection of hydroxy functionality under the Barbier-type reaction condition.     

Selective formation of nitroanilines by selenium-catalyzed monoreduction of dinitrobenzenes with CO/H2O

Nitroanilines are synthesized via selenium-catalyzed monoreduction of dinitrobenzenes with CO/H₂O. The monoreduction occurs in high selectivity regardless of other reducible functionalities on the aromatic ring. This catalytic reaction is important from both synthetic and industrial points of view, because the reaction can be carried out with high yields of desired nitroanilines not only under high pressure but also under atmospheric pressure. There exists a phase-transfer process of the selenium catalyst in the reaction, which makes the catalyst easily separated from the reaction system by simple phase separation.