Static and dynamic light scattering of a random coil polymer in rodlike polymer solution

We have studied ternary solutions of rodlike and random coil polymers in a common solvent. In these solutions, the rods scatter weakly, and almost all scattering comes from the coil component. From light scattering measurements, we gained information about the thermodynamic and hydrodynamic properties of the coil in rodlike polymer solutions.     

Tuning the interactions in cyclodextrin polymer nanoassemblies

The aim of this paper was to study the associations between a neutral β-cyclodextrin polymer and amphiphilic dextrans substituted with two kinds of groups able to make inclusion complexes with β-cyclodextrin. The first kind of substituent is purely hydrophobic (dodecyl C₁₂ or adamantyl Ada groups) and the second one, cyclohexancarboxylic acid group CHX, brings pH-dependent charge density on the dextran chains. Synthesis and characterization of the di-substituted dextrans have been detailed in a first part where it has been shown that the incorporation of CHX groups (up to 7 mol.%) did not modify the self assembling properties of the amphiphilic dextrans. Affinity of the amphiphilic dextrans for β-cyclodextrin polymer has been studied by different methods including isothermal titration calorimetry, dynamic light scattering and zeta potential. An original pH sensitive behaviour has been obtained for polymer–polymer associations at low concentrations. Nanoassemblies are formed at pH around 4 which are destabilized at lower pH and swollen into soluble aggregates at higher pH. The nanoassemblies formed at pH 4 have also been evidenced by transmission electron microscopy and have revealed a spherical shape of few hundred nanometers.     

Tuning intermolecular attraction to create polar order and one-dimensional nanostructures on surfaces

This study utilizes atomic force microscopy and electrostatic force microscopy to investigate the orientation of overcrowded aromatics in films with submonolayer coverage. The results demonstrate that the side chains in the molecules can be used as a tool to control the molecular order and orientation in thin films. For molecules that do not self-associate well, the interaction with the substrate dominates, and the molecules orient with their aromatic planes parallel to the surface. These monolayers have measurable polar order. For molecules that self-associate well, the opposite orientation is observed. These films are comprised of isolated stacks of molecules parallel to the surface.     

Towards quantitative analysis of intermolecular interactions with Hirshfeld surfaces

Enhancements to the properties based on Hirshfeld surfaces enable quantitative comparisons between contributions to crystal packing from various types of intermolecular contacts.     

Enhanced intermolecular interactions to improve twisted polymer photovoltaic performance

Science China Chemistry - In polymer solar cells (PSCs), twisted polymer donors usually have low photovoltaic efficiencies due to their poor photoactive layer morphologies. Herein, we successfully...     

Photodetector arrays directly assembled onto polymer substrates from aqueous solution

We report a simple and inexpensive approach to directly assemble arrays of cadmium sulfide (CdS) semiconductors onto transparent flexible poly(ethylene terephthalate) (PET) sheets via a polymer-mediated selective nucleation and growth process from an aqueous solution. This strategy of assembling functional materials onto plastics utilizes the surface functional molecules of the UV photooxidation patterned polymer to direct the nucleation and growth of CdS. We demonstrated that such assembled structures are viable for flexible macroelectronics, as manifested by the fabrication of CdS photodetector arrays on PET that can withstand bending. The best devices exhibited a specific detectivity of 3 x 10(11) cm Hz(1/2) W(-1) at 514-nm excitation wavelength at a modulation frequency of 90 Hz at room temperature. This direct assembly strategy eliminates additional lithography and etching steps during the deposition of the active inorganic semiconductor layer, is general to other inorganic materials and plastic substrates, and can enable low-cost, wearable, and/or disposable flexible electronics.     

Tuning the photocatalytic activity of CdS nanocrystals through intermolecular interactions in ionic-liquid solvent systems

Synthetic solvent systems for the fine-tuned preparation of CdS nanocrystallites, active in visible-light photocatalytic hydrogen production, were studied. To control crystallite size and spectral properties, the CdS crystals were synthesised by using different solvent systems, containing a series of tetrabutylammonium amino carboxylate ionic liquids as the crystal-growth control agents. Six samples of CdS, all with similar physical and spectral properties, exhibited greatly varying photocatalytic activity, with the most active sample outperforming the least active one by almost 60%. To rationalise this effect, the intermolecular interactions of the synthesis solvent system with the growing CdS nanocrystallites were characterised by using the Reichart betaine dye and the E(T)(N) polarity scale. A correlation was observed between the E(T)(N) values of the solvent system and the photocatalytic activity of the CdS nanocrystallite, suggesting that the hydrogen-bond-donating ability and/or dipolarity/polarisability interactions of the solvent system led to the preferential formation of active surfaces/surface sites on the CdS crystals.     

Raman linewidth study of intermolecular interactions of methanol in aqueous solution

Isotropic Raman linewidths of the CH and CD symmetric stretching modes of methanol and methanol-d₄ have been measured as a function of concentration in normal water, in heavy water and in carbon tetrachloride. On the basis of the concentration dependence of observed linewidths, intermolecular interactions and liquid structures in the methanol—water system are discussed. It is suggested that there may be some difference in mutual affinities or abilities of hydrogen bonding in the order D₂O > H₂O > CD₃OD > CH₃OH.     

The role of intermolecular interactions in the viscoelastic properties of polymer melts

The exact microscopic expression for the stress tensor in polymer liquids contains a tensor product of the the segment position vector with the total, intra- plus inter-chain, force acting on the segment. On the other hand, the widely accepted theory of viscoelasticity of polymer melts¹⁾ is based on the assumption, that contributions from interchain interactions to the viscosity of polymer melts is negligible relative to the effectively intrachain entropic interactions. Starting from the exact Green-Kubo formula for the viscosity, the Rouse dynamic correlation functions, and Newton's second law, we show that the intrachain assumption is inadequate. Rather, the intrachain and interchain forces acting on polymer segments cancel each other largely. The intrachain contribution therefore cannot be dominant as anticipated in the usual treatment¹⁾, or, in other words, the interchain contribution cannot be ignored. The main contribution to viscoelastic properties of polymer melts can only arise from a part of the total stress tensor as already suggested by M. Fixman based on a different argument²⁾. It is concluded that the viscosity is of a purely interchain nature, and is determined by the tensor product of the vector connecting the centers-of-mass of neighboring macromolecules on the one hand, and the total force by which macromolecules interact, on the other, just in the case of simple liquids.     

Fibronectin displacement at polymer surfaces

The interactions of fibronectin with thin polymer films are studied in displacement experiments using human serum albumin. Fibronectin adsorption and exchange on two different maleic anhydride copolymer surfaces differing in hydrophobicity and surface charge density have been analyzed by quartz crystal microbalance and laser scanning microscopy with respect to adsorbed amounts, viscoelastic properties, and conformation. Fibronectin is concluded to become attached onto hydrophilic surfaces as a "softer", less rigid protein layer, in contrast to the more rigid, densely packed layer on hydrophobic surfaces. As a result, the fibronectin conformation is more distorted on the hydrophobic substrates together with remarkably different displacement characteristics in dependence on the adsorbed fibronectin surface concentration and the displacing albumin solution concentration. While the displacement kinetic remains constant for the strongly interacting surface, an acceleration in fibronectin exchange is observed for the weakly interacting surface with increasing fibronectin coverage. For displaced amounts, no change is determined for the hydrophobic substrate, in contrast to the hydrophilic substrate with a decrease of fibronectin exchange with decreasing coverage leading finally to a constant nondisplaceable amount of adsorbed proteins. Furthermore, the variation of the albumin exchange concentration reveals a stronger dependence of the kinetic for the weakly interacting substrate with higher rates at higher albumin concentrations.     

Synthesis and properties in solution of rodlike polyelectrolytes

Efficient synthetic strategies are described for the preparation of rodlike polyelectrolytes based on the intrinsically rigid poly(p-phenylene). Uncharged precursors were first prepared via the Suzuki coupling and then characterized by different methods of polymer analysis. Finally, they were transformed into polyelectrolytes using macromolecular substitution reactions. Depending on the substitution pattern, the obtained polyelectrolytes are either soluble or insoluble in water. Using water-soluble derivatives, the Poisson-Boltzmann cell model was tested by osmotic measurements and small-angle X-ray scattering. It is shown that the cell model provides a good first approximation of the distribution of the counterions around the macroion but still underestimates their correlation. Moreover, the PPP polyelectrolytes show a very pronounced polyelectrolyte effect. Since the rodlike PPPs are very rigid in shape, this observation proves that the polyelectrolyte effect is caused by long-range intermolecular electrostatic repulsion of the dissolved macroions rather than due to conformational changes.     

End effects for a rodlike polyelectrolyte molecule in salt solution

Electrostatic potentials around a single rodlike polyelectrolyte molecule are calculated by solving the nonlinear Poisson–Boltzmann equation numerically in the presence of externally added salt. The polyion is regarded as a cylinder with a finite length whose side surface is uniformly charged and end surfaces uncharged. The calculations show that the distance to which end effects extend is about half the Debye screening length and is almost independent of the surface charge density and concentration of added salt. For a long polyion whose length is much greater than the Debye length, the end effects can be neglected even for a polyelectrolyte with high surface charges, whereas they play an important role for a short polyion with a length of the same order as the Debye length. In addition, a strong charge condensation is found in the direction of the axis of the cylinder for a long polyion.     

Synthesis and solution properties of rodlike polyelectrolytes

The synthesis and the solution behavior of rigid, rodlike cationic polyelectrolytes having (i) poly(p-phenylene) backbones and (ii) main chains composed of 4,4“-bis(2,2′:6′,2”-terpyridine)2′,5′-dihexyl-p-terphenyl moieties and ruthenium(II) centers are presented. All these polymers are shown to have a homogeneous constitution and degrees of polymerization of up to P_n ≈ 70. Their solution properties were analyzed using viscosimetry, small-angle X-ray scattering (SAXS) and osmometry. Pronounced polyelectrolyte effects were found in salt-free solutions using viscosimetry. Small-angle X-ray scattering demonstrated directly the strong correlation of the counterions and the macroions. The osmotic coefficients measured in salt-free solution as function of polyelectrolyte concentration were found to be lower than predicted by the cell model.     

Tuning hydrophobicity of a fluorinated terpolymer in differently assembled thin films

In the current report, casting from good solvent (acetone) and casting from mixed solvent and nonsolvent were employed for preparing thin films of terpolymer of T etrafluoroethylene (TFE), H exafluoropropylene (HFP), and V inylidene fluoride (VDF) (THV), on silicon wafers. These films revealed various morphologies and wetting behaviors depending on the solution concentration, temperature, and thin film preparation method. The THV thin films prepared by casting from good solvent showed smooth morphology with holes. The thin film prepared from a 3 wt % THV/acetone solution by casting from good solvent at 15 °C demonstrated spheres in addition to the smooth morphology, while the thin film prepared from a 5 wt % THV/acetone solution at 15 °C by casting from good solvent had a mesh‐like structure with some linked spheres. Casting the thin films from mixed solvent and nonsolvent resulted in various morphologies such as different sphere sizes embedded in a dense film layer, and hexagonal close packed structures. The thin films prepared by casting from good solvent showed a slightly hydrophobic character, with a measured water contact angle of approximately 99°, while the nonsolvent cast films had a water contact angle as high as 145°. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 643–657     

基于分子间相互作用的纳米尺度分子传递

纳米尺度下的分子传递是以纳米先进材料为导向的材料化学工程学科所面临的关键科学问题之一.借鉴分子热力学的建模研究思路研究分子传递,从分子之间相互作用出发,结合分子模拟技术,有望最终建立理论模型,实现分子传递的定量预测.本文通过几个研究实例初步探索了如何从分子间相互作用出发开展纳米尺度下分子传递的研究,利用分子模拟手段解析纳米尺度下特殊的微结构,并以此为基础进而实现对分子传递行为的调控和预测,指导具有丰富纳米结构的膜材料以及催化材料的设计和应用.     

Neutral and charged polymer brushes at solid surfaces

Neutral and charged polymer brushes covalently attached to planar solid surfaces were generated by using self-assembled monolayers of an azo initiator and radical chain polymerization in situ. The brushes were characterized by FTIR-spectroscopy, optical waveguide-spectroscopy and Ellipsometry. Especially the film thicknesses of surface bound polyelectrolyte (PEL) monolayers were measured by optical waveguide spectroscopy (OWS) as a function of the humidity of the environment. The PEL brushes show strong increases in thickness as well as strong decrease of the refractive index of the surface attached layer due to water incorporation caused by the exposure to the humid environment. Additionally the behavior of neutral as well as charged brushes in contact with solvent was investigated by using multiple-angular-scans of ellipsometry in a total internal reflectance setup. The scaling behavior of the brush height as a function of the graft density of the attached polymer molecules was investigated for the neutral brush as well as for the PEL brush system.     

The intermolecular interactions in binaries

The recapitulation of systematical investigations of excess enthalpy of mixing in binary mixtures: pyridine base +n-alkane or some of arenes is presented. On the base of experimental results as well as model calculations (PFP, ERAS) the discussion of intermolecular interactions in pyridine bases is given.     

Small changes with big effects: Tuning polymer properties with supramolecular interactions

For biological polymers like DNA and proteins, supramolecular interactions dictate the folding and assembly of the polymer chains. Advances in synthetic polymer chemistry enable the synthesis of polymers of defined length and composition, but the field has yet to reach the same level of sophistication as nature's polymers. However, the incorporation of just a few supramolecular interactions into a synthetic polymer chain can drastically change the manner in which the polymer assembles and interacts, thereby altering the properties of a polymeric material. This highlight will focus on approaches wherein a low‐density of supramolecular functionalities (<10 wt %) were used per polymer chain. How the selection of the appropriate supramolecular functionality (based on the directionality and strength of the interaction), along with the location of these groups on a polymer chain, can afford a spectrum of material properties has been highlighted. At one end, the supramolecular motif can dramatically alter the elasticity of a material, and at the other, the motif can have a more subtle effect like increasing the stability of a micelle. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 457–472