SYNTHESIS,SPECTRAL STUDIES,AND ANTIMICROBIAL ACTIVITIES OF [N-(UN)ALKYLATED-2-ARYLINDOL-3-YL]THIOCARBOXAMIDES

A series of [N-(un)alkylated-2-arylindol-3-yl]thiocarboxamides(6) have been synthesized by the condensation of alkyl [N-(un)alkylated-2-arylindol-3-yl]dithiocarboxylates (5) with appropriate secondary amines in absolute alcohol. Compound 5 was prepared by the reaction of N-(un)alkylated-2-arylindoles with carbon disulphide in the presence of potassium-t-butoxide followed by alkyl iodide under nitrogen atmosphere. All of the compounds have been characterized on the basis of their elemental and spectral data and have been screened for their antibacterial and antifungal activities. Some of the synthesized compounds have shown promising activity.     

Bispyrrolotetrathiafulvalene-containing [2]catenanes

Two [2]catenanes incorporating bispyrrolotetrathiafulvalene (BPTTF) and weaker aryl donors, hydroquinone (HQ) and 1,5-dioxynaphthalene (DNP), respectively, have been prepared and characterized. These [2]catenanes show a predominant amount (>95:5) of the co-conformation in which either the HQ or the DNP unit is encircled by a tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT4+), contrary to what is observed in systems based on the parent tetrathiafulvalene (TTF). These new [2]catenanes act effectively as molecular switches which are always configured in the "on" state.     

[2 + 2]-Cycloadditions to Strained Bridgehead Olefins. II. Diphenylketene

The strained bridgehead olefins bicyclo [3.3.1]non-1-ene ( 1 ), bicyclo [4.2.1 ]non-1(8)-ene ( 2 ), and bicyclo [4.2.1]non-1-ene (3), and the comparable monocyclic (E)-1-methylcyclooctene ( 4 ) react with diphenylketene ( 6 ) to give a single cycloadduct 7 , 8 , 9 and 10 , respectively, in which the diphenyl-substituted C-atom is bound to the bridgehead. The structure of the cyclobutanone 8 has been determined by X-ray analysis of a twin crystal obtained by crystallization with spontaneous enrichment of enantiomers.     

In the twilight zone between [2]pseudorotaxanes and [2]rotaxanes

A [2]pseudorotaxane, based on a semi-dumbbell-shaped component containing asymmetrically substituted monopyrrolotetrathiafulvalene and 1,5-dioxynaphthalene recognition sites for encirclement by cyclobis(paraquat-p-phenylene) and with a "speed bump" in the form of a thiomethyl group situated between the two recognition sites, has been self-assembled. This supramolecular entity is a mixture in solution of two slowly interconverting [2]pseudorotaxanes, one of which is on the verge of being a [2]rotaxane at room temperature, allowing it to be isolated by employing flash column chromatography. These two [2]pseudorotaxanes were both characterized in solution by UV/Vis and (1)H NMR spectroscopies (1D and 2D) and also by differential pulse voltammetry. The spectroscopic and electrochemical data reveal that one of the complexes behaves wholly as a [2]pseudorotaxane, while the other has some [2]rotaxane character to it. The kinetics of the shuttling of cyclobis(paraquat-p-phenylene) between the monopyrrolotetrathiafulvalene and the 1,5-dioxynaphthalene recognition sites have been investigated at different temperatures. The shuttling processes, which are accompanied by detectable color changes, can be monitored using UV/Vis and (1)H NMR spectroscopies; the spectroscopic data have been employed in the determination of the rate constants, free energies of activation, enthalpies of activation, and the entropies of activation for the translation of cyclobis(paraquat-p-phenylene) between the two recognition sites.     

Synthesis of [2]- and [3]rotaxanes through Sonogashira coupling

The synthesis of new [2]- and [3]rotaxanes through Sonogashira coupling has been accomplished in the aim to built oligo(phenyleneethynylene) (OPE) encircled by crown ethers. Optimization of the Sonogashira coupling for the formation of the [2]rotaxane (capping reaction) is presented and the best method has been applied for the synthesis of the longer [3]rotaxane.     

Structural features of Ag[AuF4] and Ag[AuF6] and the stuctural relationship of Ag[AgF4]2 and Au[AuF4]2 to Ag[AuF4]2

Synchrotron radiation X-ray powder diffraction data (SPDD) have been obtained for Ag[AgF4]2, Au[AuF4]2, Ag[AuF4], and Ag[AuF6]. Ag[AgF4]2 and Au[AuF4]2 are isostructural with Ag[AuF4]2, space group (SG) P2(1)/n, Z = 2, with the following: for Ag[AgF4]2 a = 5.04664(8), b = 11.0542(2), c = 5.44914(9) A, beta = 97.170(2) degrees; for Au[AuF4]2 a = 5.203(2), b = 11.186(3), c = 5.531(2) A, beta = 90.55(2) degrees. The structure of Ag[AgF4]2 was refined successfully (SPDD) applying the Rietveld method, yielding the following interatomic distances (A): AgII-F = 2.056(12), 2.200(13), 2.558(13); AgIII-F = two at 1.846(12), others = 1.887(12), 1.909(13), 2.786-(12), 2.796(12), 2.855(12). AgAuF4, like other AA'F4 salts (A = Na-Rb; A' = Ag, Au), crystallizes in the KBrF4 structure type, SG I4/mcm (140), Z = 4 with a = 5.79109(6), c = 10.81676(7) A. SPDD gave (in A) four AuIII-F = 1.89(1) and eight AgI-F = 2.577(7). SPDD for AgAuF6 confirmed that it has the LiSbF6 structure, SG R3, Z = 3, with a = 5.2840(2), c = 15.0451(6) A.     

Nickel complexes of bidentate [S2] and [SN] borato ligands

Nickel(II) complexes of the monoanionic borato ligands [Ph2B(CH2SCH3)2] (abbreviated Ph2Bt), [Ph2B(CH2S(t)Bu)2] (Ph2Bt(tBu)), [Ph2B(1-pyrazolyl)(CH2SCH3)], and [Ph2B(1-pyrazolyl)(CH2S(t)Bu)] have been prepared and characterized. While [Ph2Bt] formed the square planar homoleptic complex, [Ph2Bt]2Ni, the larger [S2] ligand with tert-butyl substituents, [Ph2BttBu], yielded an unexpected organometallic derivative, [Ph2Bt(tBu)]Ni(eta2-CH2SBut), resulting from B-C bond rupture. The analogous thiametallacycle derived from the [S3] ligand, [PhB(CH2S(t)Bu)3] (PhTt(tBu)), has been structurally authenticated (Schebler, P. J.; Mandimutsira, B. S.; Riordan, C. G.; Liable-Sands, L.; Incarvito, C. D.; Rheingold, A. L. J. Am. Chem. Soc. 2001, 123, 331). The [SN] borato ligands formed exclusively the cis stereoisomers upon reaction with Ni(II) sources, [Ph2B(1-pyrazolyl)(CH2SR)]2Ni. Analysis of the Ni(II/I) reduction potentials by cyclic voltammetry revealed a approximately 600 mV anodic shift upon replacement of two thioether donors ([Ph2Bt]2Ni) with two pyrazolyl donors ([Ph2B(1-pyrazolyl)(CH2SCH3)]2Ni) consistent with the all thioether environment stabilizing the lower oxidation state of nickel.     

Intramolecular [2 + 2] photocycloaddition of alkenes incorporated in a carbohydrate template. Synthesis of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes

Intramolecular [2 + 2] photocycloaddition of alkenes with a furano sugar placed between them have been investigated under both copper(I)-catalyzed and sensitized conditions. The copper(I)-catalyzed photocycloaddition of the dienes 4a, 4b, and 4c led to unexpected formation of the thermodynamically less stable cis-syn-cis 4-5-5 tricyclic adducts 5a, 5b, and 5c, respectively. The sensitized photocycloaddition of the diene 14 also gave the cis-syn-cis adduct 15 showing that the copper(I) catalyst does not have any influence on the stereochemical course through coordination with the anomeric ring oxygen of the furano sugar. The identical stereochemical course observed under both catalyzed and sensitized photoaddition reactions have been attributed to be of steric origin. Bis(dienes) 25a and 25b, which gave an intractable mixture on copper(I)-catalyzed irradiation, underwent smooth photocycloaddition in the presence of benzophenone, and the resulting 1,2-divinyl cyclobutanes underwent spontaneous [3.3]-rearrangement at room temperature to produce bicyclo[6.3.0]undecanes 30a and 30b, respectively. This investigation provides an approach for the construction of enantiopure bicyclo[3.2.0]heptanes and -[6.3.0]undecanes.     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Synthesis of Cucurbit[5]uril-Spermine-[2]Rotaxanes

Cucurbit[5]uril and decamethylcucurbit[5]uril are cyclic pentamers built from glycoluril or dimethylglycoluril respectively. Two different experimental methods have been used for the synthesis of the different [2]rotaxanes. The formed rotaxanes are characterized using ¹H-NMR spectroscopy, mass spectrometry and elemental analysis. In contrast to cucurbit[5]uril no [2]rotaxane could be obtained with decamethylcucurbit[5]uril.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Metal-driven ligand assembly in the synthesis of cyclodextrin [2] and [3]rotaxanes

Cyclodextrin [2] and [3]rotaxanes have been synthesised by use of a metal-driven ligand formation methodology. The kinetically stable cobalt(III) complexes formed act as either linking or capping groups, the function being selected by manipulation of the reaction conditions to promote the formation of either 2:1 or 1:1 complexes, respectively. In all cases, mixtures of isomers containing different alpha-cyclodextrin orientations were observed. All three orientational isomers of the [3]rotaxane were isolated and structurally characterized by 2D NMR.     

Supramolecular interactions of [60]- and [70]fullerenes with calix[n]arenes

[60]- and [70]fullerenes have been shown to form 1:1 supramolecular complexes with (i) 24,26-dimethoxy-25,27-dihydroxy-5,11,17,23-tetra(4-tert-butyl)calix[4]arene (1) and (ii) 37,39,41-trimethoxy-38,40,42-trihydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2) in CCl(4) medium by absorption spectroscopy. Charge transfer absorption bands of the complexes have been located in each of the cases (except [70]fullerene-2 complex) studied from which the vertical ionisation potential of 1 has been obtained. Formation constants of the complexes have been determined at four different temperatures from which the enthalpies and entropies of formation of the complexes have been obtained. Moreover, the formation constant of [70]fullerene-2 complex is higher than that of the [60]fullerene-1 and [60]fullerene-2 complexes at all the four temperatures studied. This has been accounted in terms of greater cavity size of 2 which is a calix[6]arene compared to 1 which is a calix[4]arene and also by the fact that a high degree of preorganisation takes place in case of 2 through intramolecular H-bonding at its lower rim.     

TeSe3]2- and [TeSe2]2- as synthons

The [Au2(TeSe2)2]2- anion has been prepared from the reaction of [TeSe3]2- with AuCN in DMF in the presence of PEt3 and from the reaction of [TeSe2]2- with AuCN in DMF. Reaction of [TeSe2]2- with AuCN in DMF in the presence of PEt3 leads ultimately to the [Au2(Te2)2]2- anion.     

1,2,4-Triazines. Synthesis of selected members of the s-triazolo[3,4-f]- [1,2,4] triazine and tetrazolo[1,5-f] [1,2,4] triazine ring systems

A convenient synthesis of 3-amino-6-hydrazino-5(2H)[1,2,4]triazinone 4 has been developed and a study of the reactions of 4 with aliphatic acids, orthoesters and miscellaneous active carbonyl reagents has been undertaken. When 4 was refluxed in either neat acid or orthoester in dimethylformamide, a facile ring closure reaction with the N-1 nitrogen of the 1,2,4-triazine ring occurs affording a novel series of 3-aIkyl(aryl)-8(5H)-s-triazolo[3,4-f] [1,2,4]triazinones ( 6–11 ). Ring closure with carbon disulfide and cyanogen bromide is also reported affording 6-amino-3(2H)thio-8(5H)-s-triazolo[3,4-f] [1,2,4]triazinone 12 and 3,6-diamino-8(5H)-s-triazolo-[3,4-f] [1,2,4]triazinone 14 , respectively. In addition 4 has been converted into 3-amino-6-azido-5(2H)-1,2,4-triazinone 15 which was employed in a study of azide-tetrazole equilibrium affording 6-amino-8(5H)tetrazolo[1,5-f][1,2,4]triazinone 16 . Rates for interconversion at various temperatures were measured and an activation energy for the process determined.     

3D porous and 3D interpenetrating triple framework structures constructed by aurophilicity-coordination interplay in [Mn[Au(CN)2]2(H2O)2]n and [KFe[Au(CN)2]3]n

Two cyano-bridged heterobimetallic coordination polymers [Mn[Au(CN)2]2(H2O)2]n (1) and [KFe[Au(CN)2]3]n (2), have been synthesized from [Au(CN)2]- building blocks and structurally characterized. In both complexes aurophilicity play an important role in determining the 3D open microporous framework and the interpenetrating triple framework for 1 and 2, respectively. Both aqueous solutions of 1 and 2 display interesting luminescent properties.     

Foldamers in pseudo[2]rotaxanes and [2]rotaxanes: tuning the switching kinetics and metastability

Hydrogen bonded arylamide foldamers have been introduced in switchable pseudo[2]rotaxanes and [2]rotaxanes, which also include a cyclobisparaquat(p-phenylene) (CBPQT⁴⁺) ring and a ‘dumbbell’ containing tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP, for rotaxanes). The foldamer size changes through folding and unfolding serve as a steric handle to modulate the mechanical movement of the CBPQT⁴⁺ ring along the dumbbell of the pseudo[2]rotaxanes and [2]rotaxanes. By varying the number of the repeating units in the foldamer, the kinetics of the solvent-dependent slippage/deslippage of pseudo[2]rotaxanes and the switching of the ring between TTF and DNP of the [2]rotoxanes can be tuned remarkably, with the time scope ranging from several minutes to several days, in twelve solvents of varying polarity, which have been confirmed by the ¹H NMR, UV–vis spectroscopy, and cyclic voltammogram experiments.     

Synthesis of 2-mercaptothieno[3,2-d]- and 2-mercaptobenzo[4, 5]thieno[2,3-d]thiazoles

2-Mercaptothieno[3,2-d]- and 2-mercaptobenzo[4, 5]thieno[2,3-d]thiazoles were synthesized by reduction of bis(3,3′-nitro-2,2′-thienyl) and bis(2,2′-nitrobenzo[b]thien-3,3′-yl) disulfides, respectively, with sodium hydrosulfite or sodium sulfide in the presence of carbon disulfide.     

The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione and its facile conversion to 2-[2-(dimethylamino)ethyl]- 5-[2-(dimethylamino)ethylamino]-8-fluoro-naphtho[2,3-c] pyrrole-4,9-dione

The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione ( 2a ) has been accomplished. Treatment of 2a with 2,2-dimethylaminoethylamine leads to 2-[2-(dimethylamino)ethyl]-5-[2-(dimethylamino)ethylamino]-8-fluoronaphtho[2,3-c]pyrrole-4,9-dione ( 6 ).     

The synthesis of imidazo[4,5-c] - and v-triazolo[4,5-c] pyridazines

The parent imidazo[4,5-c]pyridazine (IV) has been prepared for the first time by three different routes. 1-Methylimidazo[4,5-c]pyridazine (XX) and 3-methylimidazo[4,5-c]pyridazine (XXVII) have been prepared by unequivocal syntheses. The constitution of the methylation product of imidazo[4,5-c]pyridazine-2-thiol (VIII) has been shown to be 2-methylthioimidazo[4,5-c]-pyridazine (IX) by the unequivocal syntheses of 1-methylimidazo[4,5-c]pyridazine-2-thiol (XXIII) and 3-methylimidazo[4,5-c]pyridazine-2-thiol (XXXIII). Likewise, the structure of the methylation product (XIII) was shown to be S-methylation by the unequivocal syntheses of 1-methyl-2-methylthio-6-chloroimidazo[4,5-c]pyridazine (XXIV) and 3-methyl-2-methylthio-6-chloroimidazo[4,5-c]pyridazine (XXXI), respectively. Several 7-substituted amino-v-triazolo-[4,5-c]pyridazines (XXXVIII) have been prepared from 7-chloro-v-triazolo[4,5-c]pyridazine (XXXVII).