碳糊电极吸附伏安法测定痕量锑的研究

利用液体石蜡作粘合剂制成ＣＰＥ，根据锑与茜素络合剂生成的络合物在ＣＰＥ上的吸附特性，考察了最佳底液条件，共存离子的影响，测定了电活性络合物的组成，探讨了电极反应机理。方法已用于水样中锑的测定，检出限为４＊１０＾－９ｍｏｌ／Ｌ。     

碳糊电极阳极吸附伏安法测定氧氟沙星

碳糊电极阳极吸附伏安法测定氧氟沙星;氧氟沙星; 阳极吸附伏安法; 碳糊电极     

碳糊电极阴极吸附伏安法测定橙皮甙

在0.4mol/L的NH4Cl-NH3(pH9.0)缓冲液中,使用JP-303极谱分析仪,橙皮甙在碳糊电极(CPE)上有一灵敏的吸附伏安还原峰,峰电位为-1.2V(vs.SCE).该还原峰的二阶导数峰电流与橙皮甙的浓度在2.0×10-8～1.0×10-6mol/L(富集90s)范围内成良好的线性关系,相关系数为0.9963,检出限为1.0×10-8mol/L(S/N=3,富集110s).探讨了橙皮甙在碳糊电极上的伏安性质和电极反应机理,并且成功应用于中草药桔皮中橙皮甙含量的测定.     

碳糊电极阳极吸附伏安法测定环丙沙星

报道了用碳糊电极阳极吸附伏安法测定环丙沙星的新方法.在 0. 40mol/L的NH4Ac HAc(pH4. 30)缓冲液中,使用JP 303极谱分析仪,环丙沙星在碳糊电极 (CPE)上有一灵敏的吸附伏安氧化峰,峰电位为1. 12V(vs.SCE).该氧化峰的二阶导数峰电流与环丙沙星的浓度在 8. 0×10-9 ~8. 0×10-7 mol/L(富集 90s)范围内成良好的线性关系,相关系数为 0. 998 8,检出限为 4. 0×10-9 mol/L(S/N=3,富集 110s).探讨了环丙沙星在碳糊电极上的伏安性质和电极反应机理,并且成功应用于人体尿样中环丙沙星含量的测定.加入回收实验,回收率在95. 5%至 103. 9%之间.     

碳糊电极阳极吸附伏安法测定诺氟沙星

报道了用碳糊电极阳极吸附伏安法测定诺氟沙星的方法。在0.40 mol.L-1的NH4OAc-HOAc(pH 4.51)缓冲溶液中,诺氟沙星在碳糊电极(CPE)上有一灵敏的吸附氧化峰,峰电位为1.16 V(vs.SCE)。该氧化峰的二阶导数峰电流与诺氟沙星的浓度在4.0×10-9~4.0×10-7mol.L-1(富集90 s)范围内呈线性关系,相关系数为0.996,检出限为1.0×10-9mol.L-1(S/N=3,富集110 s);应用于人体尿液中诺氟沙星含量的测定,方法的回收率为99.1%~104.0%。文中探讨了诺氟沙星在碳糊电极上的伏安性质和电极反应机理。     

碳糊电极阳极吸附伏安法测定吡哌酸

吡哌酸（Pipmidic acid,简称PPA）,是吡喹酮类合成抗菌药物,目前的主要分析方法有分光光度法、交流示波滴定法、高效液相色谱法、阴极吸附溶出伏安法、单扫描示波极谱法、微分脉冲极谱法和循环伏安法。本文提出了在CPE上阳极吸附伏安法测定PPA的方法,并探讨了PPA在CPE上的伏安性质和电极反应机理。该法准确、简便、灵敏度高,应用于模拟尿样中痕量PPA的测定,得到满意的结果。     

碳糊电极阳极吸附伏安法测定卡托普利

在0.40 mol/L的HAc-NaAc(pH=4.8)缓冲溶液中,卡托普利(Captopril,CPT)在碳糊电极(CPE)上有一灵敏的吸附氧化峰,峰电位为0.23 V(vs.SCE)。该氧化峰的二阶导数峰电流与卡托普利的浓度在2.0×10-8～1.0×10-6mol/L(富集90 s)范围内呈良好的线性关系,相关系数为0.9966,检出限为8.0×10-9mol/L,并成功应用于卡托普利片含量的测定。探讨了卡托普利在碳糊电极上的伏安性质和电极反应机理。     

碳糊电极阳极吸附伏安法测定洛美沙星

报道了碳糊电极阳极吸附伏安法测定洛美沙星的新方法。在0.096mol L的KHP NaOH(pH5.4)缓冲液中,用碳糊电极为工作电极,在0.3V(vs.SCE)富集一定时间,然后从0.3～1 3V以300mV s扫速线性扫描,记录其在1 02V的二次导数阳极溶出峰。溶出峰电流与洛美沙星浓度在8.0×10-9～8.0×10-8mol L(富集90s)和8.0×10-8～8.0×10-7mol L(富集30s)范围内呈良好的线性关系,相关系数分别为0.9844和0.9967,检出限为9.0×10-10mol L(S N=3)。探讨了洛美沙星在碳糊电极上的伏安性质和电极反应机理,并且成功地应用于人体尿液中洛美沙星的测定,结果与紫外光度法基本吻合。     

碳糊电极阳极吸附伏安法测定大黄酸

在pH4.2的HAc-NaAc底液中,大黄酸在碳糊电极(CPE)上有一灵敏的吸附氧化峰,峰电位为1.14V(vs.SCE)。该氧化峰的二阶导数峰电流与大黄酸的浓度在8.0×10-9~8.0×10-7mol/L(富集120s)范围内呈良好的线性关系(r=0.998),检出限为2×10-9mol/L(S/N=3,富集180s)。探讨了大黄酸在CPE上的伏安性质和电极反应机理,并将本法应用于中药大黄中的大黄酸的测定,结果良好。     

Determination of Trace Vanadium by Adsorptive Stripping Voltammetry at a Carbon Paste Electrode

A method for the voltammetric determination of vanadium using a carbon paste electrode (CPE) was described. The new procedure is based on the adsorptive accumulation of the V(V)‐alizarin red S(ARS) complex onto the surface of the CPE, followed by the electrochemical reduction of adsorbed species. The optimal experimental conditions include the use of 0.10 mol/L acetate buffer (pH 5.1), 1.0×10^?5 mol/L ARS, an accumulation potential of ?0.10 V (versus SCE), an accumulation time of 2 min, a scan rate of 200 mV/s and a second‐order derivative linear scan mode. The reduction peak for the complex appears at ?0.52 V. The peak current is proportional to the concentration of V(V) over the range of 0.10–15.0 μg/L, and the detection limit is 0.04 μg/L for a 2 min adsorption time. The relative standard deviations(n=8) for 2.0 and 0.50 μg/L V(V) are 3.1 and 4.7%, respectively. The proposed method was applied to the determination of vanadium in water samples.     

槲皮素化学修饰碳糊电极吸附溶出伏安法测定痕量铅

建立了用槲皮素修饰碳糊电极测定痕量铅的新方法 ,在 0 .1 0mol L甲酸盐缓冲液 (pH 4.3 )中 ,于 -0 .1 0V(vs.SCE)搅拌富集 ,再在 -0 .70V静止还原 40s后 ,阳极化扫描 ,于 -0 .42V左右获得一灵敏的铅阳极溶出峰。在最佳条件下 ,富集不同时间 ,其二次导数峰电流与Pb2 + 在 1 .0× 1 0 - 8～ 8.0× 1 0 - 7mol L和 2 .0× 1 0 - 9～ 6.0× 1 0 - 8mol L两个范围内呈线性关系 ,检出限为 8.0× 1 0 - 1 0 mol L(S N =3 )。同时初步探讨了电极反应机理。     

邻苯三酚红修饰碳糊电极吸附伏安法测定痕量铋

报道了采用邻苯三酚红修饰碳糊电极测定痕量铋的方法。在０．３０ｍｏｌ／Ｌ的ＨＣｌ溶液中,于－０．１０Ｖ搅拌富集３ｍｉｎ,然后在－０．３５Ｖ静止还原６０ｓ,再进行阳极化扫描,在－０．１０Ｖ左右获得灵敏的铋溶出峰,二次导数民流与铋浓度在１．０＊１０＾－９－６．０＊１０＾－７ｍｏｌ／Ｌ范围内呈线性关系,同限为５＊１０＾－１０ｍｏｌ／Ｌ。对电极反应机理进行了讨论。     

溴邻苯三酚红修饰碳糊电极吸附伏安法测定痕量锑

研制了溴邻苯三酚红(BPR)作修饰剂的碳糊修饰电极,并采用所制备的电极做工作电极建立了测定锑的方法。测定了电活性络合物的组成,并探讨了电极反应机理。该方法已用于锌电解液中痕量锑的测定,结果满意,检出限为2.0×10-8 mol/L。     

茜素紫修饰碳糊电极阳极溶出伏安法测定痕量锡

研究了利用茜素紫修饰碳糊电极测定痕量锡的阳极溶出伏安法。在 0 1 5mol/L醋酸盐缓冲溶液 (pH 4 .8)中 ,通过开路富集 ,Sn 和茜素紫形成络合物富集于电极表面 ,然后经过介质交换至 3 0mol/L的盐酸溶液中 ,于 -0 .80V还原后再进行阳极化扫描 ,于 -0 .68V左右获得一灵敏的锡的溶出峰。二次导数峰电流与Sn 浓度在 8.4× 1 0 -9～ 1 .4× 1 0 -6mol/L范围内呈良好的线性关系。检出限达 4×1 0 -9mol/L ,同时对电极反应机理进行了讨论。     

Indirect Determination of Trace Copper(II) by Adsorptive Stripping Voltammetry with Zincon at a Carbon Paste Electrode

Traces of copper(II) can be determined by adsorptive stripping voltammetry using 2‐carboxy‐2′‐hydroxy‐5′‐sulfoformazyl benzene (Zincon) as complex forming reagent. First in phosphate buffer pH 6.4, copper(II)‐Zincon complex was adsorbed on carbon paste electrode (CPE) with an accumulation potential of 0.6 V. Following this, adsorbed complex was oxidized and detected by differential pulse voltammetric (DPV) scan from 0.6 to 1.0 V. The effective parameters in sensor response were examined. The detection limit (DL) of copper(II) was 1.1 μg/L and relative standard deviations (RSDs) for 10 and 200 μg/L Cu(II) were 1.81 and 1.03%, respectively. The calibration curve was linear for 2–220 μg/L copper(II). The resulting CPE does not use mercury and therefore, has a positive environmental benefit. The method, which is reasonably sensitive and selective, has been successfully applied to the determination of trace amount of copper in water and human hair samples.     

Catalytic Adsorptive Stripping Voltammetry at a Carbon Paste Electrode for the Determination of Amiodarone

Voltammetry using solid electrodes usually suffers from the contamination due to the deposition of the redox products of analytes on the electrode surface. The contamination has resulted in poor reproducibility and overelaborate operation procedures. The use of the chemical catalysis of oxidant on the reduction product of analyte not only can eliminate the contamination of analyte to solid electrodes but also can improve the faradaic response of analyte. This work introduced both the catalysis of oxidant K2S2O8 and the enhancement of surfactant Triton X-100 on the faraday response of amiodarone into an adsorptive stripping voltammetry at a carbon paste electrode for the determination of amiodarone. The method exhibits high sensitivity, good reproducibility and simple operation procedure. In 0.2 mol·L^-1 HOAc-NaOAc buffer （pH=5.3） containing 2.2×10^-2 mol·L^-1 K2S2O8 and 0.002% Triton X-100, the 2.5th-order derivative stripping peak current of the catalytic wave at 0.3 V （vs. Ag/AgCl） is rectilinear to amiodarone concentration in the range of 2.0×10^-10-2.3×10^-8 mol·L^-1 with a detection limit of 1.5×10^-10 mol·L^-1 after accumulation at 0 V for 30 s.