Gas chromatography/multiphoton ionization/time-of-flight mass spectrometry of polychlorinated biphenyls

A sample mixture of polychlorinated biphenyls (PCBs) was measured by gas chromatography/multiphoton ionization/time-of-flight mass spectrometry (GC/MPI/TOF-MS) using four types of laser sources. When a fourth harmonic emission (266 nm) of a picosecond Nd:YAG laser (1064 nm) was utilized, highly chlorinated PCBs larger than hepta-CBs were not observed. A fifth harmonic emission (213 nm) of the picosecond Nd:YAG laser allowed the measurement of PCBs from di-CBs to octa-CBs, and the limit of detection (LOD) was several pg for each component of PCBs. The LOD for the total amount of PCBs, which was calculated using the protocol provided by the Ministry of the Environment, Japan, was 1000 pg. The signal intensity of the congeners with chlorine atoms at the ortho positions (non-coplanar PCBs) was enhanced by using the fifth harmonic emission. When the fourth harmonic emission remaining after fifth harmonic generation was simultaneously used, the LOD for total PCBs was improved to 667 pg. The PCB sample was also measured using a third harmonic emission (267 nm) of a femtosecond Ti:sapphire laser (800 nm), providing an LOD of 677 pg. Thus, the two-color beam (266/213 nm) of a picosecond Nd:YAG laser had a comparable, or even slightly superior, performance to the more expensive femtosecond Ti:sapphire laser.     

Real-time monitoring of monochlorinated benzene and polychlorinated biphenyls in the gas phase with on-line detection: High chemical selectivity of resonance-enhanced two-photon ionization.

The development of molecular spectroscopy has enabled us to select chlorinated aromatic hydrocarbons very rapidly. In particular, the laser ionization TOFMS (time-of-flight mass spectrometry) method is expected to be useful as an on-line, selective, and sensitive method. In the present work, real-time laser ionization TOFMS measurements were carried out on gaseous chlorinated aromatic hydrocarbons. The laser ionization method used resonance-enhanced two-photon ionization with the direct introduction of gas into the vacuum chamber. This method for analyzing aromatic hydrocarbons was developed using a pulsed supersonic molecular beam method. In the context of developing a highly selective and sensitive method, excitation of monochlorinated benzene at lambda = 263.07 nm was found to be effective in the wavelength region from 263 nm to 265 nm. Also the excitation of polychlorinated biphenyls at lambda = 266 nm was found to be substantially more effective than at lambda = 280, 300 or 320 nm. The achievable sensitivity for real-time (1 min) measurements using the laser ionization TOFMS technique was found to be in the ppbV range.     

光电子成像方法研究Xe时间分辨多光子电离过程

利用自行研制的离子成像检测器研究了Xe的飞秒时间分辨双色多光子电离过程.Xe的408nm多光子电离对比实验结果表明,该离子成像检测器与相应的进口产品具有相近的光电子能量分辨率.在272nm飞秒激光作用下,3光子电离产生能量为1.57和0.26eV的光电子,分别对应于Xe+的两个自旋态;在408nm飞秒激光作用下,还观察到第一级阈上电离产生的光电子.在双色飞秒时间分辨实验中,随着两束光相对时间的改变,光电子能谱出现了一系列的变化;随着两束光时间重合程度的增加,由双色多光子电离(3+1'或4'+1)产生的光电子信号逐渐加强;在第二束光的作用下,由第一束单色光产生的光电子出现能量红移,第二束光同时也导致中间态布居数减少.这种光电子能谱的红移现象反映了原子体系中激光场诱导有质动力势的时间分辨动态调制过程.     

Near-ultraviolet femtosecond laser ionization of dioxins in gas chromatography/time-of-flight mass spectrometry

Gas chromatography/multiphoton ionization/time-of-flight mass spectrometry (GC/MPI/TOF-MS) was applied to the trace analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). To determine the optimum wavelength for analysis of PCDD/Fs, the wavelength of the femtosecond laser utilized for multiphoton ionization was converted to near-ultraviolet status using stimulated Raman scattering. A femtosecond laser emitting at 300 nm completely eliminated the background signal arising from the bleeding compounds generated from a stationary phase of the capillary column in GC.     

Two-photon ionization thresholds of matrix-assisted laser desorption/ionization matrix clusters

Direct two-photon ionization of the matrix has been considered a likely primary ionization mechanism in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. This mechanism requires that the vertical ionization threshold of matrix materials be below twice the laser photon energy. Because dimers and larger aggregates may be numerous in the early stages of the MALDI plume expansion, their ionization thresholds are important as well. We have used two-color two-photon ionization to determine the ionization thresholds of jet cooled clusters of an important matrix, 2,5-dihydroxy benzoic acid (DHB), and mixed clusters with the thermal decomposition product of DHB, hydroquinone. The thresholds of the clusters were reduced by only a few tenths of an eV compared to the monomers, to an apparent limit of 7.82 eV for pure DHB clusters. None of the investigated clusters can be directly ionized by two nitrogen laser photons (7.36 eV), and the ionization efficiency at the thresholds is low.     

乙腈团簇增强的激光高价电离现象的质谱研究

利用脉宽为25 ns的脉冲Nd：YAG1064 nm激光, 在10¹⁰～10¹¹ W•cm^－２强度下, 用飞行时间质谱对乙腈分子束激光电离过程进行了研究, 发现了高价态的原子离子N^q+(q＝1～5)和C^q+(q＝1～4). 类氦离子N⁵⁺、C⁴⁺的最可几平动能分别高达566 eV和427 eV. 激光延时以及不同束源压力的实验结果表明, 这些高价离子可能来源于乙腈团簇的库仑爆炸过程. 提出一个多光子电离引发, 逆韧致吸收加热- 电子碰撞电离模型来解释高价离子的产生.     

Volumetric intensity dependence on the formation of molecular and atomic ions within a high intensity laser focus

The mechanism of atomic and molecular ionization in intense, ultra-short laser fields is a subject which continues to receive considerable attention. An inherent difficulty with techniques involving the tight focus of a laser beam is the continuous distribution of intensities contained within the focus, which can vary over several orders of magnitude. The present study adopts time of flight mass spectrometry coupled with a high intensity (8 x 10(15) Wcm(-2)), ultra-short (20 fs) pulse laser in order to investigate the ionization and dissociation of the aromatic molecule benzene-d1 (C(6)H(5)D) as a function of intensity within a focused laser beam, by scanning the laser focus in the direction of propagation, while detecting ions produced only in a "thin" slice (400 and 800 microm) of the focus. The resultant TOF mass spectra varies significantly, highlighting the dependence on the range of specific intensities accessed and their volumetric weightings on the ionization/dissociation pathways accessed.     

Isomer discrimination of polycyclic aromatic hydrocarbons in the Murchison meteorite by resonant ionization

We have used two-color resonant two-photon ionization (2C-R2PI) mass spectrometry to discriminate between isomers of polycyclic aromatic hydrocarbons in the Murchison meteorite. We measured the 2C-R2PI spectra of chrysene and triphenylene seeded in a supersonic jet by laser desorption. Since each isomer differs in its R2PI spectrum, we can distinguish between isomers using wavelength dependent ionization and mass spectrometry. We found both chrysene and triphenylene in sublimates from carbonaceous residue obtained by acid demineralization of the Murchison meteorite. Their R2PI mass spectra show only the molecular ion, even though these samples contain a complex inventory of organic molecules.     

Infrared laser post-ionization of large biomolecules from an IR-MALD(I) plume

A two-infrared laser desorption/ionization method is described. A first laser, which was either an Er:YAG laser or an optical parametric oscillator (OPO), served for ablation/vaporization of small volumes of analyte/matrix sample at fluences below the ion detection threshold for direct matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). A second IR-laser, whose beam intersected the expanding ablation plume at a variable distance and time delay, was used to generate biomolecular ions out of the matrix-assisted laser desorption (MALD) plume. Either one of the two above lasers or an Er:YSGG laser was used for post-ionization. Glycerol was used as IR-MALDI matrix, and mass spectra of peptides, proteins, as well as nucleic acids, some of which in excess of 10(5) u in molecular weight, were recorded with a time-of-flight mass spectrometer. A mass spectrum of cytochrome c from a water ice matrix is also presented. The MALD plume expansion was investigated by varying the position of the post-ionization laser beam above the glycerol sample surface and its delay time relative to the desorption laser. Comparison between the OPO (pulse duration, tau(L) = 6 ns) and the Er:YAG laser (tau(L) approximately 120 ns) as primary excitation laser demonstrates a significant effect of the laser pulse duration on the MALD process.     

Distinguishing authentic and counterfeit banknotes by surface chemical composition determined using electrospray laser desorption ionization mass spectrometry

Electrospray laser desorption ionization mass spectrometry (ELDI/MS) was used to rapidly distinguish authentic banknotes from counterfeits of the US dollar and the New Taiwan dollar. The banknotes' surfaces were irradiated with a pulsed ultraviolet laser, after which the desorbed ink compounds entered an electrospray plume and formed ions via interactions with charged solvent species. Authentic banknotes were found to differ from their counterfeit equivalents in their surface chemical compositions. The detected chemical compounds included various polymers, plasticizers and inks; these results were comparable with those obtained using solvent extraction followed by electrospray ionization mass spectrometry analysis. Because of the high spatial resolution of the laser beam, ELDI/MS analysis resulted in minimal damage to the banknotes. Copyright © 2013 John Wiley & Sons, Ltd.     

The distribution of ion acceptance in atmospheric pressure ion sources: Spatially resolved APLI measurements

It is demonstrated that spatially resolved mass selected analysis using atmospheric pressure laser ionization mass spectrometry (APLI MS) represents a new powerful tool for mechanistic studies of ion-molecule chemistry occurring within atmospheric pressure (AP) ion sources as well as for evaluation and optimization of ion source performance. A focused low-energy UV laser beam is positioned computer controlled orthogonally on a two-dimensional grid in the ion source enclosure. Resonance enhanced multiphoton ionization (REMPI) of selected analytes occurs only within the confined volume of the laser beam. Depending on the experimental conditions and the reactivity of the primary photo-generated ions, specific signal patterns become visible after data treatment, as visualized in, e.g., contour or pseudo-color plots. The resulting spatial dependence of sensitivity is defined in this context as the distribution of ion acceptance (DIA) of the source/analyzer combination. This approach provides a much more detailed analysis of the diverse processes occurring in AP ion sources compared with conventional bulk signal response measurements.     

Influence of the laser fluence in infrared matrix-assisted laser desorption/ionization with a 2.94 microm Er : YAG laser and a flat-top beam profile

The dependence of the signal intensity of analyte and matrix ions on laser fluence was investigated for infrared matrix-assisted laser desorption/ionization (IR-MALDI) mass spectrometry using a flat-top laser beam profile. The beam of an Er : YAG laser (wavelength, 2.94 microm; pulse width, 90 ns) was coupled into a sapphire fiber and the homogeneously illuminated end surface of the fiber imaged on to the sample by a telescope. Three different laser spot sizes of 175, 350 and 700 microm diameter were realized. Threshold fluences of common IR matrices were determined to range from about 1000 to a few thousand J m(-2), depending on the matrix and the size of the irradiated area. In the MALDI-typical fluence range, above the detection threshold ion signals increase strongly with fluence for all matrices, with a dependence similar to that for UV-MALDI. Despite the strongly different absorption coefficients of the tested matrices, varying by more than an order of magnitude at the excitation laser wavelength, threshold fluences for equal spot sizes were found to be comparable within a factor of two. With the additional dependence of fluence on spot size, the deposited energy per volume of matrix at threshold fluence ranged from about 1 kJ mol(-1) for succinic acid to about 100 kJ mol(-1) for glycerol.     

Two-color resonant multiphoton ionization study of CO. The rotational energy transfer behavior of CO A1 Πstate

Two-color resonant multiphoton ionization provides a novel technique, complementary to LIF, for studying state-to-state molecular relaxation dynamics. A set of formulae applicable to two-color pulsed laser ionization experiments has been derived to evaluate the rotational energy transfer probability for CO(A)-CO(X)collision pairs. The magnitude of this probability is on the order of 1/10 for rotational quantum jump ΔJ = ±1 and diminishes with increasing ΔJ. For the same > J(<±3), a transition with e/f symmetry conservation is always more probable than that with an e/f change.     

MALDI-MS imaging of features smaller than the size of the laser beam

The feasibility of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging of features smaller than the laser beam size has been demonstrated. The method involves the complete ablation of the MALDI matrix coating the sample at each sample position and moving the sample target a distance less than the diameter of the laser beam before repeating the process. In the limit of complete sample ablation, acquiring signal from adjacent positions spaced by distances smaller than the sample probe enhances image resolution as the measured analyte signal only arises from the overlap of the laser beam size and the non-ablated sample surface. Image acquisition of features smaller than the laser beam size has been demonstrated with peptide standards deposited on electron microscopy calibration grids and with neuropeptides originating from single cells. The presented MS imaging technique enables approximately 25 microm imaging spatial resolution using commercial MALDI mass spectrometers having irregular laser beam sizes of several hundred micron diameters. With appropriate sampling, the size of the laser beam is not a strict barrier to the attainable MALDI-MS imaging resolution.     

On the use of single-photon ionization for inorganic surface analysis

Summary A general surface analysis method has been developed based on non-selective photoionization of sputtered or desorbed neutral atoms and molecules above the surface, followed by time-of-flight mass spectrometry. The approach, currently utilizes two main types of ionizing radiation and a variety of desorption probes. For photoionization, coherent untuned sources are used; an intense focused pulsed UV laser beam is used for non-resonant multiphoton ionization to give elemental and limited chemical information, usually used for inorganic analysis; a coherent VUV source is used for single-photon ionization at 118 nm (10.5 eV) produced by frequency tripling of 355 nm light from a Nd:YAG laser. This paper focuses on single-photon ionization for inorganic systems. The desorption probes used are ion, electron, and laser beams as well as thermal desorption. For depth profiling, ion beams are specifically used. Any focused desorption probe beam can provide lateral spatial resolution.     

Quantitative aspects in electrospray ionization ion trap and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of malto-oligosaccharides

Mass spectrometry is widely applied in carbohydrate analysis, but still quantitative evaluation of data is critical due to different ionization efficiencies of the constituents in a mixture. Different size and chemical structure of the analytes cause their uneven distribution in droplets (electrospray ionization, ESI) or matrix spots (matrix-assisted laser desorption/ionization, MALDI). In addition, instrumental parameters affect final ion yields. In order to study and optimize the latter, an equimolar mixture of malto-oligosaccharides (DP1-6) was analyzed using varying target masses for ESI as well as different matrices and laser power for MALDI. The sodium adducts and derivatives for positive ion mode (hydrazones with Girard's T Reagent, GT) and negative ion mode (reductively aminated with o-aminobenzoic acid, oABA) were studied. Negatively charged oABA-labeled malto-oligosaccharides turned out to be unsuitable for quantification of the malto-oligomeric composition. Best agreement was achieved when applying target masses in the range of the highest homolog in the mixture in electrospray ionization ion trap (ESI-IT) (1-2% deviation with GT label or as Na(+) adducts). Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) gave best results when the laser power was adjusted significantly over the desorption/ionization threshold (1% deviation with GT label). Both parameters show significant influence on the determined oligomeric composition. Consequently, estimation and even quantitative determination of amounts of oligosaccharides in a mixture can be achieved when the analytes are labeled and the proper instrumental parameters are used.     

Analysis of native milk oligosaccharides directly from thin-layer chromatography plates by matrix-assisted laser desorption/ionization orthogonal-time-of-flight mass spectrometry with a glycerol matrix

We have recently presented a new method for direct coupling of high-performance thin-layer chromatography (HPTLC) with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), illustrated by the analysis of a complex ganglioside mixture. In the current communication, an adaptation of this procedure to mixtures of native oligosaccharides from human and from elephant milk is described. The key features in this method are (1) glycerol as a liquid matrix, to provide a homogeneous wetting of the silica gel and a simple and fast MALDI preparation protocol, (2) an infrared (IR) laser for volume material ablation and particular soft desorption/ionization conditions, and (3) an orthogonal time-of-flight mass spectrometer for a high mass accuracy, independent of any irregularity of the silica gel surface. Chromatographic "mobility profiles" were determined by scanning the laser beam across the analyte bands. The current limit of detection for the MS analysis was determined to approximately 10 pmol of individual oligosaccharides spotted for chromatography. A liquid composite matrix, containing glycerol and the ultraviolet (UV-)MALDI matrix alpha-cyano-4-hydroxycinnamic acid, allows a direct HPTLC-MALDI-MS analysis with a 337 nm-UV laser as well. Compared to the IR-MALDI mode, the analytical sensitivity in UV-MALDI was found to be lower by one order of magnitude, whereas unspecific analyte ion fragmentation as well as adduct formation was found to be more extensive.     

Ultraviolet femtosecond laser ionization mass spectrometry

For this study, multiphoton ionization/mass spectrometry using an ultraviolet (UV) femtosecond laser was employed for the trace analysis of organic compounds. Some of the molecules, such as dioxins, contain several chlorine atoms and have short excited-state lifetimes due to a "heavy atom" effect. A UV femtosecond laser is, then, useful for efficient resonance excitation and subsequent ionization. A technique of multiphoton ionization using an extremely short laser pulse (e.g., <10 fs), referred to as "impulsive ionization," may have a potential for use in fragmentation-free ionization, thus providing information on molecular weight in mass spectrometry.     

Infrared pulsed fiber laser-produced silver-109-nanoparticles for laser desorption/ionization mass spectrometry of amino acids

Application of monoisotopic cationic ¹⁰⁹Ag nanoparticles (¹⁰⁹AgNPs) obtained by pulsed fiber laser (PFL) 2D galvo-scanner (GS) laser generated nanomaterial (LGN) for both high resolution laser desorption/ionization mass spectrometry and mass spectrometry imaging of amino acids is presented. Four amino acids, alanine, isoleucine, lysine, and phenylalanine were used as test compounds for quantification with matrix-assisted laser desorption/ionization mas (MALDI)-type mass spectrometer. Comparison of commonly made manual measurements with semiautomatic mass spectrometry imaging (MSI) was performed providing very interesting findings. Amino acids were directly tested in 1 000 000-fold concentration change conditions ranging from 1 mg/ml to 1 ng/ml, which equates to 500 ng to 500 fg of amino acid per measurement spot. Methods were also tested on samples of human blood plasma for quantification of endogenous amino acids.     

Detection of intact hemoglobin from aqueous solution with laser desorption mass spectrometry

Laser induced liquid beam ionization/desorption mass spectrometry (LILBID-MS) is a new desorption method recently developed in our laboratory. This method allows ions to be desorbed directly from the liquid phase into the high-vacuum region of a mass spectrometer. This method has now been applied to the detection of noncovalent protein-protein complexes. The example given in this paper is the quartenary complex of human hemoglobin. For the first time, the intact hemoglobin could be detected by laser desorption mass spectrometry. Furthermore, evidence for the specificity of the complex is given.