Prochlorperazine bismethanesulfonate as a new reagent for the spectrophotometric determination of palladium

A simple, rapid, and selective method for the determination of palladium is described. The orange-red palladium(II)-prochlorperazine bismethanesulfonate complex in the presence of hydrochloric acid-sodium acetate buffer exhibits maximum absorbance at 480 nm with a molar absorptivity of 4.32 × 10³ liters mol^?1 cm^?1. The sensitivity of the reaction is 24.62 ng cm^?2. The system obeys Beer's law over the concentration range 0.4–20 ppm of palladium with an optimum concentration range of 1–19 ppm. The apparent stability constant of the complex is found to be log K = 5.3 ± 0.1 at 27 °C. The effects of pH, time, temperature, order of addition of reactants, reagent concentration, and interferences from various ions are reported. The proposed method offers the opportunity to carry out the determination at room temperature without the need for an extraction step. The method is also found to be suitable for the determination of palladium in jewelry alloy.     

Spectrophotometric determination of microgram amounts of platinum

2-Ethyl-10-[3-(dimethylamino-2-methyl)propyl]phenothiazine hydrochloride (ethylisobutrazine hydrochloride) forms an orange-red complex with platinum(IV) at room temperature (26 ± 2 °C) in hydrochloric acid-sodium acetate buffer medium containing copper(II) ions. The complexation is complete within 10 min. The complex exhibits an absorption maximum at 529 nm with a molar absorptivity of 1.90 × 10⁴ liters mol^?1 cm^?1. Beer's law is obeyed over the concentration range 0.4–7.8 ppm of platinum. A 50-fold molar excess of the chromogenic reagent is necessary for the development of maximum color intensity. Job's method of continuous variation, the molar-ratio method, and the slope-ratio method indicate a 1:1 composition for the complex. The effects of pH, time, temperature, reagent concentration, order of addition of reagents, and interference of various ions are reported. The reagent has also been used successfully for the determination of platinum in minerals and alloys.     

Spectrophotometric and analogue derivative spectrophotometric determination of ultramicro amounts of cadmium with cationic porphyrins

alpha,beta,gamma,delta-Tetrakis(1-methylpyridinium-3-yl)porphine [T(3-MPy)P] and alpha,beta,gamma,delta-tetrakis(1-methylpyridinium-4-yl)porphine [T(4-MPy)P] have been found to react rapidly with cadmium to give coloured complexes in weakly alkaline media at room temperature. Simple and practical methods for the determination of cadmium at ng/ml levels by conventional and analogue derivative spectrophotometry have been proposed. The analogue method gives higher sensitivity. T(3-MPy)P gives higher sensitivity than T(4-MPy)P. The interference of various foreign cations and anions has also been examined and in many cases eliminated or reduced. Adsorption of the porphyrins and their cadmium complexes onto the glassware, which is usually observed under the conditions of reaction and causes significant errors in the determination, can be suppressed almost completely by addition of fairly large amounts of a salt such as sodium chloride.     

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride as a spectrophotometric reagent for the determination of lodate in acetic and perchloric acid media

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride produces colored solutions with iodate ions in acid medium. The yellow color obtained has been used to proposed Spectrophotometric methods for determination of IO₃^? in the concentration range 1.0–11.0 ppm in acetic acid medium (molar absorptivity 1.08 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 415 nm) and 0.5–8.0 ppm in perchloric acid medium (molar absorptivity 2.05 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 400 nm).     

N-p-chlorophenylcinnamohydroxamic acid: A new reagent for the microgram determination of vanadium(V)

A new reagent, N-p-chlorophenylcinnamohydroxamic acid, for the rapid solvent extraction and spectrophotometric determination of microgram quantities of vanadium(V) is reported. Vanadium(V) is extracted from a chloroform solution of the reagent, N-p-chloro-phenylcinnamohydroxamic acid, with 4–8 M HCl. The bluish violet extract has maximum absorbance at 545 nm. The extract obeys Beer's law at 545 nm, and the sensitivity of the reagent is 0.008 μg V/ml. The complex is stable for several days. The effects of acidity, reagent concentrations, and diverse ions are discussed.     

Sensitive spectrophotometric determination of La(III) with 1-(2-pyridylazo)-2-naphthol

A simple and sensitive method for spectrophotometric determination of lanthanum has been developed. At pH 9.6, in presence of 50% ethanol, lanthanum reacts with 1-(-2-pyridylazo)-2-naphthol (PAN) to form a red complex which has two absorption maxima, at 545 and 510 nm. The molar absorptivity at 545 nm is 0.55 × 10⁴ liters · mol^?1 cm^?1. On the other hand, lanthanum reacts with PAN in pure ethanol to form a red complex at 530 nm, with high molar absorptivity (8 × 10⁴ liters · mol^?1 cm^?1).     

Electrothermal atomic-absorption spectrophotometric determination of molybdenum

The sensitivity for determining Mo by ETA-AA is dependent on the heating programme employed when the peak-height method is used, but not when the peak area is used for evaluation of the AA signals. The linear range is greater at lower heating rate. Molybdenum can be directly determined in up to 8% NaCl solution without chemical pretreatment or background correction by making use of the high ashing temperature allowed, at which the matrix NaCl can be totally removed. The minimum recovery is 94.5%. Amounts of alkaline earth metals greater than 4000 times the amount of Mo give scatter signals, but these are time-resolved from the Mo signal. Any small effect on the peak height or area can be compensated for by background correction. The interference of tungsten is significant even at low concentrations (2-5 mug/ml) owing to the formation of stable compounds. Mo is determined in brines and acid digests of phosphate rocks after preconcentration and separation with the APDC-MIBK system, by ETA-AA of the organic extracts with or without mineralization.     

Ethylisobutrazine hydrochloride as a selective and sensitive reagent for the spectrophotometric determination of vanadium(V) and its application to vanadium-bearing minerals and alloys

Ethylisobutrazine hydrochloride is proposed as a selective and sensitive reagent for the spectrophotometric determination of vanadium(V). It forms a red-colored species with vanadium(V) in 3.5–6.5 M phosphoric acid medium. An eight-fold molar excess of reagent is necessary for the full development of the color. The red species exhibits an absorption maximum at 518 nm with a molar absorptivity of 9.75 × 10³ liters mol⁻¹ cm⁻¹. Sandell's sensitivity is 5.2 ng cm⁻². Beer's law is obeyed over the range 0.1–6.2 ppm of vanadium(V) with an optimum concentration range of 0.4–6.0 ppm. The effects of acidity, time, temperature, order of addition of reagents, reagent concentration, and the interferences from various ions, are reported. The method has been used successfully for the determination of vanadium in ilmenite and vanadium steels that contain chromium, molybdenum, manganese, nickel, copper, tungsten, and titanium.     

Extractive spectrophotometric determination of molybdenum as a thiocyanate-2-acetylpyridinethiosemicarbazone complex

A new spectrophotometric method for the determination of molybdenum is based on the extraction of the orange red molybdenum thiocyanate-2-acetylpyridinethiosemicarbazone complex into chloroform from hydrochloric acid. The complex has an absorption maximum at 470 nm with a molar absorptivity of 1.7 × 10⁴ liters mol^?1 cm^?1. Beer's law is valid from 0.1 to 6.5 ppm of molybdenum. The equilibrium shift method indicated a 1:4:2 complex. The method has been used successfully for the determination of molybdenum in molybdenum steels.     

Extractive spectrophotometric determination of molybdenum(V) in molybdenum steels

An extraction spectrophotometric method has been developed for the determination of traces of molybdenum present in molybdenum steels which is based on the extraction of the orange-red molybdenum-thiocyanate-acetonethiosemicarbazone complex into chloroform from hydrochloric acid medium. The complex has an absorption maximum at 472 nm with a molar absorptivity of 1.9 × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is valid over the concentration range 0.1–9.5 ppm of molybdenum with an optimum concentration range of 0.4–9 ppm. The equilibrium shift method indicates 1:4:2 composition for molybdenumthiocyanate-acetonethiosemicarbazone complex. The effect of acidity, reagent concentrations, temperature, and interferences from various ions are reported.     

Studies on pollutants: A new reagent for the detection of fluoride

A new solid analytical reagent is reported for the detection and semiquantitative determination of traces of fluoride. A blue (λ_max 590 nm) trypan blue dye is liberated from an insoluble zirconium-trypan blue complex by the action of fluoride in dilute acetic acid medium. The detection limit is 0.8 ppm and the range of semiquantitative determination is 0.8 to 8 ppm. The method is simple and can be conveniently used for field detection of fluoride in polluted waters.     

Nonpyridinic derivatives in C-5 of 2-thiohydantoin for spectrophotometric determination of palladium

The reactions between Pd(II) and four nonpyridinic derivatives of 2-thiohydantoin (5-benzal-2-thiohydantoin, 5-(o-hydroxy)benzal-2-thiohydantoin, 5-(m-hydroxy)benzal-2-thiohydantoin, and 5-anisal-2-thiohydantoin) have been considered. The influence of the different experimental parameters on the formation of the complexes was studied, and the optimum conditions for the determination of palladium were established. The anisal derivative was selected among these four reagents and the spectrophotometric determination of palladium described in detail. The precision of the procedure, expressed in terms of relative standard deviation was 0.9%, and numerous ions that usually interfere in palladium determination, such as Os(VIII), Rh(III), and Ru(IV) (of the platinum group) and Pb(II), Cd(II), Ni(II), Co(II), Zn(II), and others of the transition series, were tolerated.     

Rapid spectrophotometric determination of cerium(IV), arsenic(III), and nitrite with perphenazine

Perphenazine dihydrochloride, PPN, is proposed as a new reagent for the spectrophotometric determination of cerium(IV), arsenic(III), and nitrite. The reagent forms a red-colored species with cerium(IV) instantaneously in 3.5–5.5 M phosphoric acid medium. The red species exhibits maximum absorbance at 516 nm. A 15-fold molar excess of PPN is necessary for the full development of the color intensity. Beer's law is obeyed over the cerium concentration range 0.4–20 ppm and Sandell's sensitivity is found to be 0.016 μg/ cm². The effects of acidity, time, order of addition of reagents, temperature, reagent concentration, and diverse ions are reported. The proposed method offers the advantages of good sensitivity, simplicity, rapidity, selectivity, and a wider range of determination without the need for heating or extraction. Arsenic(III) and nitrite are also indirectly determined. The method is extended to the determination of cerium content in synthetic mixture corresponding to misch metal.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Girard-P derivative of 2-pyridinecarboxaldehyde as analytical reagent. Spectrophotometric determination of copper

The synthesis, characteristics, properties, and reactions with metallic ions of pycolinaldehyde derivatives of Girard-P reagent have been studied. The reagents form complexes with Cu(II), Ni(II), Co(II), Hg(II) and (I), Zn(II), Cd(II), and Fe(III), and (II), which exhibit a good sensibility but whose spectra have the absorption maxima located in the ultraviolet zone. The spectrum of copper complex in the presence of ascorbic acid shows another absorption band at the visible region and this makes the spectrophotometric determination of copper very selective. The influence of the different experimental parameters on the formation of copper complex without ascorbic acid and with this compound was studied, and the optimum conditions for the determination of copper were established. The precision of the procedure, expressed in terms of relative standard deviation, was 1.1%. The method has been tested on “white metal E-8” samples.     

Solvent extraction and spectrophotometric determination of iron(II) with 2,2′-dipyridyl-2-quinolylhydrazone

2,2′-Dipyridyl-2-quinolylhydrazone (DPQH) was used for the spectrophotometric determination of trace amount of iron(II) after the extraction process. Iron(II) reacts with DPQH at pH 3.4–4.5 to form a water-insoluble 1:2 complex, which can be extracted with many kinds of organic solvent. The extracted species with benzene has absorption maxima at 473, 504, and 644 nm and obeyed Beer's law over the range 0–14 μg of iron at 504 nm and 0–33 μg at 644 nm. The molar absorptivities at 504 and 644 nm are 3.14 × 10⁴ and 1.30 × 10⁴M^?1 cm^?1, respectively. DPQH is one of the most sensitive reagents for iron(II) and trace amount of iron(II) can be determined in the presence of fairly large amounts of other ions. Possible equilibria involved in the extraction process were also studied.     

Spectrophotometric determination of BrO3− using the 1,2,4-trihydroxyanthraquinone-3-carboxylic acid as reagent

The reaction between the 1,2,4-trihydroxyanthraquinone-3-carboxylic acid and BrO₃^? in hydrochloric acid medium has been studied spectrophotometrically. The red color of the oxidation product serves as basis for a new method for determination of traces of BrO₃^?, measuring the absorbance at 520 nm. The influence of foreign ions on the determination, the stoichiometry of the reaction, and the nature of the oxidation product, have been reported.     

Solvent extraction and spectrophotometric determination of palladium(II) with some nitrogen-containing heterocyclic hydrazones in the presence of chloride ions

Three terdentate hydrazones, all containing the 1-phthalazino grouping in the hydrazine moiety but differing in the heterocyclic substituent in the aldehyde moiety, have been used as analytical reagents for palladium(II), the optimal conditions for the extractive spectrophotometric determination of palladium(II) in the presence of chloride ions being deduced. These compounds are highly selective and sensitive reagents for palladium(II), since they are not extracted into chloroform from sulfuric acid solutions and do not react with other platinum group metals. The desirable spectral properties of the palladium(II) complex of benzothiazole-2-aldehyde-1-phthalazinohydrazone (BAPhH) have also been discussed with respect to preference of the C  N structural form in the heterocyclic ring on the aldehyde moiety of the ligand.     

Atomic-absorption spectrophotometric determination of antimony, arsenic, bismuth, tellurium, thallium and vanadium in sewage sludge

Electrothermal atomic-absorption spectrophotometry (AAS), by use of a graphite furnace, in conjunction with sample pretreatment by homogenization, was evaluated as a rapid method for the determination of bismuth, thallium and vanadium in sewage sludge. This method was compared with use of flame, electrothermal and hydride-generation (for bismuth) AAS in conjunction with conventional acid digestion and dry-ashing pretreatments and was found to be applicable to this type of sample. Comparisons were also made between flame and hydride-generation AAS in conjunction with an acid digestion pretreatment for the determination of antimony, arsenic and tellurium in sewage sludge. The hydride-generation technique was considered the better for waste-water samples because of its greater sensitivity.