Spectrofluorimetric determination of aliphatic amines using a new fluorigenic reagent: 2,6-dimethylquinoline-4-(N-succinimidyl)-formate

A new amino fluorescence probe, 2,6-dimethylquinoline-4-(N-succinimidyl) formate (DMQF-OSu) has been synthesized. Based on the selective reaction of DMQF-OSu with primary and secondary aliphatic amines to yield strong fluorescence, a new spectrofluorimetric method for the determination of total aliphatic amines has been developed. At λ_ex/λ_em=324.4/416 nm, the linear calibration range was 6×10⁻⁸-6×10⁻⁶ mol l⁻¹ with the detection limit (3σ) of 1.94×10⁻¹⁰ mol l⁻¹ for the determination of aliphatic amines in weak basic media. The proposed method has been applied to the determination of aliphatic amines in tap water and lake water with the recoveries of 99-104%. Compared with the reported methods, the method presented here is rapid, simple, sensitive and feasible.     

A highly chemoselective Boc protection of amines using sulfonic-acid-functionalized silica as an efficient heterogeneous recyclable catalyst

A facile and versatile method for the chemoselective Boc protection of amines has been developed by a treatment with (Boc)₂O in the presence of sulfonic-acid-functionalized silica as a catalyst. The method is general for the preparation of N-Boc derivatives of aliphatic (acyclic and cyclic), aromatic, and heteroaromatic amines; primary and secondary amines; aminols, amino-esters; and sulfonamides. The catalyst works under heterogeneous conditions and can be recycled.     

From terminal alkynes directly to branched amines

The one-pot synthesis of several branched secondary aliphatic amines is described. Hydroamination of terminal alkynes with aliphatic primary amines in the presence of Cp₂Ti(η²-Me₃SiCCSiMe₃) gives the corresponding aldimines as intermediates. Reaction of these in situ produced aldimines with organolithium reagents (n-BuLi, PhLi) provides the α-branched amines in an easy way in upto 78% overall yield.     

The use of 2,2′-thiodiethanol in the fluorimetric determination of secondary amines with o-phthalaldehyde and 2-mercaptoethanol

The fluorimetric determination of secondary amines based on conversion with sodium hypochlorite to primary amines and the o-phthalaldehydemercaptoethanol (OPA) reagent is discussed. Interference by excess hypochlorite (e.g., oxidation of OPA or conversion of primary amines to chloramines) were suppressed by 2,2′-thiodiethanol. Two spectrophotofluorimetric method are reported, one for aromatic and the other for aliphatic secondary amines. These methods permitted determinations at nanomolar levels; relative standard deviations were 4% for 5 nmol of N-methylaniline and 13% for 5 nmol of sarcosine.     

Determination of primary and secondary aliphatic amines with high performance liquid chromatography based on the derivatization using 1,3,5,7-tetramethyl-8-(N-hydroxysuccinimidyl butyric ester)-difluoroboradiaza-s-indacene

In this article, the simultaneous determination of primary and secondary aliphatic amines including dimethylamine (DMA), diethylamine and eleven primary aliphatic amines by high performance liquid chromatography (HPLC) with fluorescence detection has been achieved using a BODIPY-based fluorescent derivatization reagent, 1,3,5,7-tetramethyl-8-(N-hydroxysuccinimidyl butyric ester)-difluoroboradiaza-s-indacene (TMBB-Su). The derivatization reaction of TMBB-Su with aliphatic amines was optimized with orthogonal design experiment and the derivatization reaction proceeded at 15 °C for 25 min. The baseline separation of these derivatives was carried out on a C₈ column with methanol-tetrahydrofuran-50 mM pH 6.50 HAc-NaAc buffer (55/5/40, v/v/v) as a mobile phase. Detected at the excitation and emission of 490 and 510 nm, respectively, the detection limits were obtained in the range of 0.01-0.04 nM (signal-to-noise ratio = 3). The proposed method has been applied to the determination of trace aliphatic amines in viscera samples from mice without complex pretreatment or enrichment method. The recoveries ranged from 95.1% to 106.8%, depending on the samples investigated.     

A convenient method for the synthesis of N-hydroxyureas

Treatment of amines with 1-(4-nitrophenol)-N-(O-benzylhydroxy)carbamate yields the O-benzyl protected N-hydroxyureas. Hydrogenation of the O-benzyl protected N-hydroxyureas over 5% Pd/BaSO₄ cleanly gives the N-hydroxyureas in good yield. In addition to primary and secondary aliphatic and aromatic amines, this method converts amino sugars to the corresponding N-hydroxyureas without extensive protecting group chemistry.     

Graphical and visualizing method of identification of selected groups of aliphatic compounds in thin-layer chromatography

A new method of group identification was established for selected aliphatic compounds giving homologous series, based upon constant ΔR_M and directional coefficient “a” values (the “a” values being tangents of the angle between the course of the R_M = f(n_c) function and the “x” axis).The results presented concern identification of higher fatty acids and their ethyl esters, amides of higher fatty acids, higher aliphatic amines, ethylalkyl ketones, and dicarboxylic acids.Simultaneously, another method of identifying groups of aliphatic compounds was established, taking advantage of differentiated visualizing effects.     

Native amine-directed site-selective C(sp3)-H arylation of primary aliphatic amines with aryl iodides

Direct C(sp³)-H functionalization of N-unprotected aliphatic amines represents one of the most efficient and straightforward strategies for amine synthesis. Despite some recent progress in this field, the NH₂-directed γ-C(sp³)-H arylation of primary aliphatic amines except α-amino esters remained an unmet challenge. In this report, we established a simple and efficient method for site-selective C(sp³)-H arylation of primary aliphatic amines by aryl iodides. In the presence of only 5 mol% Pd(OAc)₂, a wide range of aliphatic amines including O-benzyl and O-silyl amino alcohols were arylated at γ- or δ-positions by aryl iodides containing a broad scope of functional groups. The synthetic application of this method had also been demonstrated by large-scale synthesis, the synthesis of a fingolimod analogue, and the conjugation with natural d-menthol and fluorescent 1,8-naphthalimide.     

Reductive Amination of Aldehydes and Ketones to Their Corresponding Amines with NaBH4 in Micellar Media

A variety of aliphatic and aromatic aldehydes and ketones were efficiently reduced to their corresponding amines when treated with primary and secondary amines and NaBH₄ in micellar media at room temperature under neutral conditions.     

N-(Benzoyloxy)amines: an investigation of their thermal stability, synthesis, and incorporation into novel peptide constructs

A series of N-benzoyloxyamines were pyrolyzed and their decomposition temperatures correlated well with the amine architecture's ability to stabilize a N-centered radical. A variety of amine substrates were treated with a biphasic mixture of benzoyl peroxide (BPO), CH₂Cl₂ and an aqueous carbonate buffer (at pH 10.5). Primary and secondary amines were successfully N-benzoyloxylated in good yield. Tertiary amines and BPO gave low yields of the corresponding N-oxide and complex product mixtures, presumably via radical decomposition. Electron deficient amines (such as fluorinated aliphatic amines, α-aminoacids, α-aminoesters, and α-aminoamides) were not N-benzoyloxylated under these conditions. Instead, N-benzoylation was observed with the fluorinated amines and the reaction was sensitive to temperature and the pH of the aqueous medium. A one-pot-two-step synthesis of N^α-FMOC-l-Leu-N^β-(benzoyloxy)-β-alanine ethyl ester, a peptide containing both an α- and a novel β-amino acid framework, was also developed.     

Reductive Amination of Aldehydes and Ketones to Their Corresponding Amines with NaBH<Subscript>4</Subscript> in Micellar Media

Summary. A variety of aliphatic and aromatic aldehydes and ketones were efficiently reduced to their corresponding amines when treated with primary and secondary amines and NaBH₄ in micellar media at room temperature under neutral conditions.     

LC Analysis of Aliphatic Primary Amines and Diamines After Derivatization with 2,6-Dimethyl-4-quinolinecarboxylic Acid N-Hydroxysuccinimide Ester

A method for sensitive simultaneous analysis of aliphatic primary amines and diamines has been developed and validated. The compounds were analyzed by reversed-phase high-performance liquid chromatography after pre-column derivatization with 2,6-dimethyl-4-quinolinecarboxylic acid N-hydroxysuccinimide ester as fluorescent probe. The derivatization reaction was performed at 50 °C for 40 min in 0.1 mol L^?1 borax buffer solution (pH 7.5). The resulting fluorophores were separated to baseline on a C₁₈ column and fluorimetrically detected at λ _ex/λ _em = 326/409 nm. Detection limits were in the range 0.50–0.02 nmol L^?1. The method was successfully used for analysis of aliphatic amines in water, human urine, and serum.     

Gas-chromatographic determination of aliphatic amines in natural surface water and wastewater

A procedure was developed for the gas-chromatographic determination of aliphatic amines C₇–C₂₀ with prederivatization by N-methyl-bis(trifluoroacetamide), in the concentration range of natural surface water, to 10^?4-1 mg/L, and wastewater, to 10^?3-1 mg/L. The conditions were optimized for the extraction preconcentration of aliphatic amines with toluene from natural surface water and wastewater. The detection limit for aliphatic amines at a signal-to-noise ratio of 3: 1 was 50 ng/L.     

Laboratory investigation of annular denuders as sampling system for the determination of aliphatic primary and secondary amines in stack gas

A method for the sampling and analysis of aliphatic amines ranging from C₁ to C₅ and some diamines in exhaust gas is described. Two different annular denuder systems coated with phosphoric acid were used for the laboratory investigation of sampling gaseous amines. The denuder sampling systems were tested under different conditions for their readiness to work in stack gas.The reagent 2,4-dinitrofluorobenzene (DNFB) was used in pre-column derivatization of the amines investigated. The amino derivatives were separated using high performance liquid chromatography (HPLC) in conjunction with UV-detection. This method has been used for the examination of emissions from a landfill waste disposal and from animal husbandry with respect to traces of aliphatic amine emissions.     

Platinum nanoparticles as recyclable heterogeneous catalyst for selective methylation of amines and imines with formic acid: Indirect utilization of CO2

N-methylation of amines and imines with formic acid as C1 source by easily prepared Pt NPs as heterogeneous catalyst is reported here. Primary, secondary amines and imines were successfully methylated in good to excellent yields under mild conditions. Both aromatic and aliphatic amines could be applied as substrates. Meanwhile, the heterogeneous Pt NPs were capable to be recylcled and reused for 7 times without significant decrease of reactivity. This protocol provided an indirect utilization pathway of CO₂ by using formic acid as C1 source.     

A mild and practical copper catalyzed amination of halothiophenes

We have found that N,N-dimethylethanolamine (deanol) is a useful solvent and ligand for copper catalyzed amination of a variety of unactivated and activated 2- or 3-halothiophenes. Primary amines, acyclic secondary amines, cyclic secondary amines and acyclic secondary amines with 2-hydroxyethyl functionality react with halothiophenes in moderate to excellent yields. The mildly basic conditions utilized are compatible with many functional groups. The amination of halobithiophenes has also been examined. The aminothiophenes produced by this method are important intermediates in a variety of electronic and optoelectronic materials.     

Effect of a carboxyl group on the chemiluminescent reaction of tris(2,2′-bipyridine)ruthenium(III) with aliphatic amines

The effect of a carboxyl group beside nitrogen of aliphatic amines on the tris(2,2′-bipyridine)ruthenium(III), Ru(bpy)₃³⁺, chemiluminescent reaction was examined. It has been shown that a carboxylate anion promotes the chemiluminescent reaction at a lower pH and then the aliphatic amines with this substituent can be sensitively detected compared with corresponding aliphatic amines without this substituent. Based on this finding, preliminary studies on simultaneous determination of 4-hydroxyproline, N-methylglycine, N-methylalanine, proline, and pipecolic acid in human serum have been performed using isocratic reversed-phase ion-pair high-performance liquid chromatography (HPLC) with electrogenerated Ru(bpy)₃³⁺ chemiluminescent detection. The detection limits (signal-to-noise ratio of 3) with the proposed method were 3.0, 12, 2.7, 4.6, and 10 nM for 4-hydroxyproline, N-methylglycine, N-methylalanine, proline, and pipecolic acid, respectively.     

New 1,2-dithioether based 2D copper(I) coordination polymer: from synthesis to catalytic application in A3-coupling reaction

Abstract

A new 2D copper(I) coordination polymeric complex has been synthesized from CuI and 1-(1-{4-chlorophenylthio}propan-2-ylthio)-4-chlorobenzene ([(CuI)₂{ArSCH₂CH(CH₃)SAr}₂]_n, Ar = 4-ClC₆H₄) and characterized by high resolution mass spectrometry (HRMS) and single crystal X-ray diffraction techniques. The complex has been employed as a suitable catalyst for a solvent-free, one-pot, three-component A³-coupling reaction. A variety of aromatic and aliphatic aldehydes, terminal alkynes and aliphatic cyclic secondary amines have been used to prepare a library of propargylamines using the 2D-Cu complex at significantly low concentration (0.2?mol%).     

Approaches to primary tert-alkyl amines as building blocks

Primary tert-alkyl amines include analogues of amantadine, a fragment commonly linked to pharmacophoric groups to enhance biological activity. The preparation of primary tert-alkyl amines is considered to be a difficult problem. Four synthetic procedures, some of which have been previously reported for the synthesis of amines with primary (RCH₂NH₂) or secondary (RR'CHNH₂) alkyl and/or aryl groups, were tested for the synthesis of primary tert-alkyl amines (RR′R″CNH₂) in aliphatic series including adamantane adducts. These procedures included the formation and reduction of tert-alkyl azides, the Ritter reaction in standard and modified conditions, the addition of organometallic reagents to N-tert-butyl sulfinyl ketimines and one-pot reactions between nitriles and organometallic reagents in the presence of a Lewis acid, Τi(iPrO)₄ or CeCl_3. These synthetic routes are unexplored for primary tert-alkyl amines. Studies on the synthetic routes for primary tert-alkyl amines are currently lacking. The reaction conditions and substrate limitations were studied for each procedure, with the first procedure being the most general and applicable also for compounds bearing bulky adducts.     

Efficient, solventless N-Boc protection of amines carried out at room temperature using sulfamic acid as recyclable catalyst

A simple, rapid, and efficient protocol for the chemoselective N-Boc protection of amines using sulfamic acid as catalyst is described. N-Boc protection of various structurally diverse aliphatic, aromatic, alicyclic, and heterocyclic amines (1°, 2°, 3°) was carried out with (Boc)₂O using sulfamic acid as catalyst (5 mol %) at room temperature under solventless conditions. The advantages of this method are simplicity, shorter reaction times (1-15 min), a cost-effective catalyst, and excellent isolated yields (90-100%); it is also environmentally benign. Moreover, the combined use of ultrasound and sulfamic acid achieves a synergic effect that is especially marked in the N-Boc protection of deactivated (sterically hindered and electron-deficient) amines. The catalyst possesses distinct advantages: ease of handling, cleaner reactions, high activity, and excellent chemoselectivity.