几种有机试剂对电感耦合等离子体原子荧光光谱法同时测定钾、钙、镁和钠的影响

本文观察并测试了七种有机试剂和两种还原性气体对 ICP-AFS 同时测量钾、钙、镁和钠时荧光强度的影响,认为有机试剂加入后对荧光强度的增强作用不仅仅是因为有机试剂可以改变雾化效果所致。在比较了有机试剂与还原性气体的影响差异后,本文认为有机试剂对荧光强度的影响是多方面的。     

Fluorimetric determination of boron with resacetophenone as a reagent

Summary A method has been developed for the fluorimetric determination of boric acid, which gives a blue fluorescence with resacetophenone in sulphuric acid or phosphoric acid medium. The method has the advantage that the reaction does not require much time, because the fluorescence intensity reaches its maximum immediately after mixing the reagents and does not also decrease with time. The intensity of fluorescence can be measured with a fluorimeter and the amount of boric acid determined from a calibration curve.     

The use of naphthalene derivatives in inorganic analysis : The effect of substituents in the naphthalene nucleus on the fluorimetric detection of tin

Fourteen substituted nitronaphthalene derivatives have been examined as reagents for the fluorimetric detection of tin. The compounds investigated included dinitronaphthalenes, dinitronaphthylamines, halogen substituted mononitronaphthylamines, mononitroso- and dinitro-naphthols and their sulphonic acid derivatives. Four of these reagents have been found to exhibit strong fluorescence and another four to give moderate fluorescence with stannous tin. All reagents are capable of detecting l0^-4 g stannous tin and with four of them, 10^-5 g is capable of detection in 0.01 ml of solution. The results indicate that two of the most important factors relating structure of reagent to intensity of fluorescence are (a) the position of the nitro group in the naphthalene nucleus, i.e., whether it is α- or β- or whether it is sterically hindered and (b) the electropositive or electronegative character of other substituent groups in the reagent     

显色剂性能的量子化学方法(PPP法)研究

编制了适于有机显色剂电子结构与光谱性能研究的PPP法计算程序。用此程序计算了吡啶偶氮显色剂系列,并对部分显色剂进行实验,结果发现计算与实验的长波吸收波长有较好的一致性。     

Uptake of lead and its influence in the alga Selenastrum capricornutum printz

The influence of nutrient level, hours of fight and the flux of air by volume of solution on uptake of lead has been examined from batch growth experiments carried out with the alga Selenastrum capricornutum Printz. The organic matter released by the alga has been characterized in terms of absorbance at 285 nm, dissolved organic carbon and maximum intensity of fluorescence at the excitation peak. The lability of lead complexes formed with the alga exudates has been investigated in terms of differential pulse anodic stripping voltammetry (DPASV). It has been noticed that lead inhibits the division of the cells which become bigger in size but with less pigment per cell.     

Fluorimetric determination of titanium with 2-methyl-3-ethyl-5-hydroxychromone

Titanium reacts with 5-hydroxychromone and eleven of its derivatives to form water-insoluble yellow complexes, which exhibit yellow-green fluorescence on extraction into carbon tetrachloride. An investigation of the substituent effect on the fluorescence intensity of the titanium complexes of these reagents showed that the best fluorescent reagent for the determination of titanium is 2-methyl-3-ethyl-5-hydroxychromone. The maximum wavelengths of the excitation and emission spectra of 2-methyl-3-ethyl-5-hydroxychromone complex are 395 nm and 513 nm, respectively. The titanium complex shows constant fluorescence intensity when extracted from a solution of pH 6.5–8.5. When extraction is done with 10ml of carbon tetrachloride, 0.5–5.0 μg of titanium can be determined. The effects of diverse ions and of substituent position in the reagents are discussed.     

Organic fluorescence reagents in the study of enzymes and proteins.

Studies designed to elucidate life processes require close cooperation between various scientific disciplines. A pertinent example is seen in the application of fluorescence spectroscopy to biological studies, where biological sciences, physical and organic chemistry, and technical innovations complement one another. This report reviews the application of fluorescence probes which bind covalently to certain sites of proteins. The major organic fluorescence reagents used in this field are tabulated.     

阳离子荧光敏感器的器件化问题研究

通过对石英玻片表面修饰, 制作了联有多氨基链萘基的超薄膜荧光敏感器件, 研究了它在镍、铜等金属离子水溶液及有机溶剂中的荧光猝灭现象. 发现其荧光光谱无论在水或其他有机溶剂中都存在着单体和激基缔合物(ex-cimer)的发射峰, 当处于镍离子水溶液中时, 其单体峰随离子浓度的增大出现了先增强后减弱的现象, 而激基缔合物的发光峰则仅略有减弱但变化不大. 在铜离子水溶液中其荧光的变化情况和镍离子有所不同, 对单体荧光只能观察到强度减弱的趋势, 而激基缔合物则变化不大. 比较了未联结的敏感器化合物分子在有机溶剂中荧光被铜离子猝灭的行为, 发现与其在器件表面时有很大的差别, 表明其分子结构和构象也有很大的不同.     

Studies towards understanding the mechanism of organic reagent enhancement in flame and plasma atomic absorption spectrometry

A series of organic reagents have been tested in atomic absorption measurement for signal enhancement of metal elements. Organic reagents like tetrabutylammonium bromide are demonstrated to enhance the absorption sensitivity to some specific elements such as calcium and chromium. A group of amines were found to have significant enhancement for chromium and calcium measurements. The function of organic reagents in flame and plasma atomic absorption spectrometry (AAS) was investigated in this work with emphases on mechanism of signal enhancement and interference suppression. An alternative mechanism of organic reagent enhancement in flame and plasma AAS has been suggested based on the experimental results obtained in this work. The reduction environments in flame and plasma produced by the organic reagents are considered as major reason for the signal enhancement.     

Fluorescent property of 3-hydroxymethyl imidazo[1,2-a]pyridine and pyrimidine derivatives

ABSTRACT: BACKGROUND: Imidazo[1,2-a]pyridines and pyrimidines are important organic fluorophores which have been investigated as biomarkers and photochemical sensors. The effect on the luminescent property by substituents in the heterocycle and phenyl rings, have been studied as well. In this investigation, series of 3-hydroxymethyl imidazo[1,2-a]pyridines and pyrimidines were synthesized and evaluated in relation to fluorescence emission, based upon the hypothesis that the hydroxymethyl group may act as an enhancer of fluorescence intensity. RESULTS: Compounds of both series emitted light in organic solvents dilutions as well as in acidic and alkaline media. Quantitative fluorescence spectroscopy determined that both fused heterocycles fluoresced more intensely than the parent unsubstituted imidazo[1,2-a]azine fluorophore. In particular, 3-hydroxymethyl imidazo[1,2-a]pyridines fluoresced more intensely than 3-hydroxymethyl imidazo[1,2-a]pyrimidines, the latter emitting blue light at longer wavelengths, whereas the former emitted purple light. CONCLUSION: It was concluded that in most cases the hydroxymethyl moiety did act as an enhancer of the fluorescence intensity, however, a comparison made with the fluorescence emitted by 2-aryl imidazo[1,2-a]azines revealed that in some cases the hydroxymethyl substituent decreased the fluorescence intensity.     

负热电离质谱测定硼同位素的涂样试剂比较

目前人们并未注意到利用负热电离质谱方法测定硼同位素所采用涂样试剂中BO^-的同质异位素CNO^-离子的存在和影响。对硼同位素测定采用的不同涂样试剂进行比较，结果发现在去硼海水和硝酸盐溶液中存在BO2^-的同质异位素CNO^-离子，干扰离子不仅来自有机物，而且可能来自硝酸根。在硼同位素测定中，检查空白中的43峰和43／42比值是必要的。实验表明MgCl2 NaOH混合溶液是负热电离质谱测定硼同位素的较为理想的涂样试剂。     

水溶性β-环糊精交联聚合物与分析试剂客体包结反应的研究

以环氧氯丙烷为交联剂, 合成了一种水溶性β-环糊精(β-CD)交联聚合物。与β-CD单体不同, 此种聚合物在与有机分子客体发生包结反应时, 聚合物中的β-CD单元具有协同作用。本文详细地研究了聚合物与一系列含有双客体的有机试剂的包结反应, 发现它在化合物的增溶以及分子吸收和荧光光谱的增强方面比β-CD单体具有更好的效果与功能。为超分子配合物在分析化学中的应用开拓了新的前景。     

A study of polymer blends by nonradiative energy transfer fluorescence spectroscopy

The nonradiative energy transfer (NRET) method has been used to study the miscibility of polymer blends in the solid state. This can be done by labeling the polymers with fluorescence donor and acceptor chromophores. The efficiency of energy transfer, which reveals the interpenetration of the chains, is measured by following changes in the fluorescence intensity ratio of the donor and acceptor as a function of the concentration of the polymer mixture and by comparison with reference values corresponding to totally miscible and totally immiscible systems. It is shown that the reference ratio corresponding to the absence of energy transfer must be determined by using donor-labeled and acceptor-labeled polymer films, instead of making measurements in chromophore solutions in organic solvents, as has usually been done. It is also shown that fluorescence quenching is important in such studies, since it can lead to variations of the fluorescence intensity ratio by more than an order of magnitude; this factor varies with blend concentration and is particularly sensitive to the presence of halogen atoms. The NRET technique has been applied to several PVC/CPVC binary blends and to PCL/PVC/CPVC ternary blends in which PVC and CPVC were labeled by naphthalene and anthracene, respectively [PCL is poly(ε-caprolactone), PVC is poly(vinyl chloride), and CPVC is chlorinated PVC]. For binary blends, the measured intensity ratios indicate the immiscibility of PVC with CPVC, although there is nonnegligible energy transfer between the two phases. For ternary blends, the intensity ratios indicate that the addition of up to 40 wt % of PCL to the immiscible PVC/CPVC binary system leads to the formation of two coexisting PCL/PVC and PCL/CPVC phases.     

Use of fluorescence shift and fluorescence anisotropy to evaluate the re-binding of template to (S)-propranolol imprinted polymers

The binding of (R)- and (S)-propranolol to an (S)-propranolol imprinted polymer in organic and aqueous solutions has been studied using fluorescence. The amount of propranolol that binds can be measured by separating non-bound propranolol from the polymer by centrifugation, and measuring the fluorescence intensity. However, this work demonstrates that other measurements can indicate how much propranolol has bound without the need to separate bound and non-bound analyte. In toluene + 0.5% AcOH, and in aqueous buffer (25 mM citrate pH 6 + 0.5% Triton X100) the fluorescence anisotropy increases as the fraction of analyte bound to the polymer increases. In aqueous buffer, binding to the polymer is also accompanied by a change in the relative intensities of fluorescence at 322 nm and at 352 nm. These non-separation techniques have been used to show that the imprinted polymer binds more (S)-propranolol than a non-imprinted polymer, and at least in organic solvent, shows selectivity for (S)- over (R)-propranolol.     

Transition Metals in the Synthesis and Functionalization of Indoles [New Synthesis Methods (72)]

The use of transition-metal complexes as reagents for the synthesis of complex organic compounds has been under development for at least several decades, and many extraordinary organic transformations of profound potential have been realized. However, adoption of this chemistry by the practicing synthetic organic chemist has been inordinately slow, and only now are transition-metal reagents beginning to achieve their rightful place in the arsenal of organic synthesis. Several factors contributed to the initial reluctance of synthetic organic chemists to use organometallic reagents. Lacking education and experience in the ways of elements having d electrons, synthetic chemists viewed organometallic processes as something mysterious and unpredictable, and not to be discussed in polite society. Organometallic chemists did not help matters by advertising their latest advances as useful synthetic methodology, but restricting their studies to very simple organic systems lacking any serious functionality (e.g., the “methyl, ethyl, butyl, futile” syndrome). Happily, things have changed. Organometallic chemists have turned their attention to more complex systems, and more recently trained organic chemists have benefited from exposure to the application of transition metals. This combination has set the stage for major advances in the use of transition metals in the synthesis of complex organic compounds. This review deals with one aspect of this area, the use of transition metals in the synthesis of indoles.     

Characterization of new fluorescent peroxidase substrates

The reagents Lumigen PS-1 and Lumigen PS-3 were originally developed as chemiluminescent substrates for ultrasensitive detection of horseradish peroxidase (HRP) in homogeneous solution and membrane blotting assays. However, an additional unique feature of these acridan-based reagents is the generation of a fluorescent species on reaction with peroxidase, a property which has been termed as chemifluorescence. These reagents, therefore, represent the first dual-use substrates enabling both chemiluminescent and fluorescent detection. We have developed several additional acridan-based substrates for fluorescent detection of HRP which are capable of subattomole detection sensitivity. By varying several structural parameters within the class of compounds we have produced substrates which either produce fluorescence alone or both chemiluminescence and fluorescence.     

Creation of superior carboxyfluorescein dyes by blocking donor-excited photoinduced electron transfer

[Structure: see text] Carboxyfluoresceins are widely utilized as fluorescence labeling reagents, but we recently found that their emission intensity is markedly decreased after esterification. On the basis of our hypothesis that the fluorescence decrease is due to a donor-excited photoinduced electron transfer (d-PeT) process, we have developed novel carboxyfluorescein derivatives in which the d-PeT process is hampered, and the emission intensity is not decreased upon esterification. These novel dye derivatives display high quantum yields and are expected to be useful as labeling agents.     

Simultaneous monitoring of the fluorescence and refractive index by surface plasmon coupled emission: A proof-of-concept study

Simultaneous acquisition of fluorescence property and refractive index using a single surface plasmon coupled emission (SPCE) measurement has been achieved, thus achieving synchronicity in real time. The SPCE sensor was employed for monitoring the adsorption of volatile organic compounds (VOCs) by dye-encapsulated metal-organic frameworks (Dye@MOFs). Refractive index can reveal surface molecular adsorption and the fluorescence with information on refractive index can provide a comprehensive analysis of the adsorption events of VOCs on the interface. Meantime, the signal intensity can be amplified by combining the responses caused by changes in refractive index and the fluorescence property in parallel. This all-in-one method opens up a route to monitoring multiple processes simultaneously occurring on the interface.     

Fluorescence study of fullerene in organic solvents at room temperature

At room temperature, fluorescence spectra for C60 in organic solvents of four typical kinds have been reported, which indicate that intensity of fluorescence and fine structure of fluorescence peaks are dependent on the interaction between C60 and solvent. It is shown that the solvents of effective electron donors could make a comparatively strong interaction with fullerenes due to formation of the charge transfer adduct, which could greatly distort the molecular symmetry, leading to the strong and well-resolved fluorescence. The strong fluorescence spectra for C70 in room temperature solutions are also observed.