Reduction of Breakdown Pressure by Filter Cake Removal Using Thermochemical Fluids and Solvents: Experimental and Numerical Studies

The process of well cleanup involves the removal of an impermeable layer of filter cake from the face of the formation. The inefficient removal of the filter cake imposes difficulty on fracturing operations. Filter cake’s impermeable features increase the required pressure to fracture the formation. In this study, a novel method is introduced to reduce the required breakdown pressure to fracture the formation containing the water-based drilling fluid filter cake. The breakdown pressure was tested for five samples of similar properties using different solutions. A simulated borehole was drilled in the core samples. An impermeable filter cake using barite-weighted drilling fluid was built on the face of the drilled hole of each sample. The breakdown pressure for the virgin sample without damage (filter cake) was 6.9 MPa. The breakdown pressure increased to 26.7 MPa after the formation of an impermeable filter cake. Partial removal of filter cake by chelating agent reduced the breakdown pressure to 17.9 MPa. Complete dissolution of the filter cake with chelating agents resulted in the breakdown pressure approximately equivalent to the virgin rock breakdown pressure, i.e., 6.8 MPa. The combined thermochemical and chelating agent solution removed the filter cake and reduced the breakdown pressure to 3.8 MPa. Post-treatment analysis was carried out using nuclear magnetic resonance (NMR) and scratch test. NMR showed the pore size redistributions with good communication between different pores after the thermochemical removal of filter cake. At the same time, there was no communication between the different pores due to permeability impairment after filter cake formation. The diffusion coupling through NMR scans confirmed the higher interconnectivity between different pores systems after the combined thermochemical and chelating agent treatment. Compressive strength was measured from the scratch test, confirming that filter cake formation caused added strength to the rock that impacts the rock breakdown pressure. The average compressive strength of the original specimen was 44.5 MPa that increased to 73.5 MPa after the formation of filter cake. When the filter cake was partially removed, the strength was reduced to 61.7 MPa. Complete removal with chelating agents removed the extra strength that was added due to the filter cake presence. Thermochemical and chelating agents resulted in a significantly lower compressive strength of 25.3 MPa. A numerical model was created to observe the reduction in breakdown pressure due to the thermochemical treatment of the filter cake. The result presented in this study showed the engineering applications of thermochemical treatment for filter cake removal.     

超疏水滤纸的制备与应用

对SiO2纳米粒子进行硅烷化改性,再将其修饰到滤纸上,制备出静态水接触角＞150°的超疏水滤纸,对制备条件进行了优化。 用热重分析及扫描电子显微镜对超疏水滤纸表征后发现,二氧化硅纳米粒子在滤纸纤维表面形成一层包裹层,即纳米级粗糙结构,这种结构对滤纸的疏水性具有关键作用。 对滤纸的油水分离性能进行了研究,发现其对非均相体系和高粘度油水混合物具有很好的分离效果。     

Catalytic Coatings for Active and Passive Diesel Particulate Filter Regeneration

Summary. This paper will give an overview how catalytic coatings are applied in diesel particulate filter systems to support filter regeneration by soot oxidation with nitrogen dioxide or oxygen. Catalytic coatings can be placed on a catalyst substrate in front of a diesel particulate filter, on a filter, or in a combined system on both. Strategies and conditions for successful filter regeneration of those systems will be discussed.This revised version was published online in February 2005. In the previous version the issue was not marked as a special issue, and the issue title and the editor was missing     

The Effects of Salts on the Room-Temperature Fluorescence and Room-Temperature Phosphorescence of Tetrols on Filter Paper and Filter Paper with Silicone

Abstract

Several salts were investigated to enhance the room-temperature solid-matrix phosphorescence of the four stereoisomeric tetrols on filter paper. Thallium acetate was found to enhance the phosphorescence to the greatest extent, but it was necessary to prepare the thallium acetate in an acetic acid solution to achieve the maximum phosphorescence from the solid matrix. Also, thallium acetate essentially quenched the solid-matrix fluorescence of the tetrols. Without thallium acetate adsorbed on filter paper, strong room-temperature fluorescence signals were observed from the tetrols adsorbed on filter paper. With a new solid matrix, filter paper which contained silicone, no heavy-atom was needed to obtain strong phosphorescence from the adsorbed tetrols. In fact, the room-temperature fluorescence from the tetrols adsorbed on this type of filter paper was very strong. The room-temperature fluorescence gave a limit of detection in the sub-picogram range for one of the tetrols with the silicone treated filter paper.     

Filter morphology and performance: Porosimetry and microscopy of oil filter media compared with filtration

A series of oil filter media were studied for their performance and morphology. The filter efficiency and capacity were studied by standard procedures     

SWNT-MWNT hybrid filter attains high viral removal and bacterial inactivation

We describe the concept and demonstrate the efficacy of a novel SWNT-MWNT hybrid filter for the removal and inactivation of microbial pathogens from water. The filter is composed of a thin SWNT layer (0.05 mg cm(-2)) on top of a thicker MWNT layer (0.27 mg cm(-2)) supported by a microporous support membrane. The SWNT-MWNT filter exhibits high log removal of several model viruses (MS2, PRD1, and T4 bacteriophages) by depth filtration, which predominantly takes place in the thicker and more uniform MWNT layer. The filter removes all bacteria by a sieving mechanism, with the top SWNT layer providing high levels of inactivation of model bacteria (Escherichia coli K12 and Staphylococcus epidermidis), as well as microbes from river water and treated wastewater effluent. The dual-layer SWNT-MWNT filter lays the framework for new possibilities in point-of-use water filtration.     

Matched filtering with background suppression for improved quality of base peak chromatograms and mass spectra in liquid chromatography-mass spectrometry

A time domain filter that combines the properties of matched filtering and two-fold differentiation is presented. The filter coefficients are given by the second derivative of a Gaussian model peak, controlled by the setting of two parameters related to the chromatographic system. The fundamental characteristics of the filter were derived, and its applicability demonstrated for real liquid chromatography-mass spectrometry (LC-MS) data. The filter is primarily intended as a fast pre-processing step, for a mass chromatogram with 320 scans over 700 mass channels the computation time was 0.6 s on a standard PC. Base peak chromatograms with improved peak detection capability and mass spectra useful for compound identification were obtained with filtered data. The most significant effect of the described filter is background reduction due to the differentiation, which in combination with the matched filter can be performed with maintained or even improved signal-to-noise ratio.     

Non-specific binding and saturation of Polysorbate-20 with aseptic filter membranes for drug substance and drug product during mAb production

An issue identified during filtration of mAb drug substance is Polysorbate-20 absorption by polyethersulfone filter membranes. Experiments determined that both polyvinylidene fluoride filter membranes and polyethersulfone filter membranes bind Polysorbate-20. Saturation point, bound surfactant amount per square cm of membrane, and non-specific binding mechanisms are described in this report. An appropriate approach for preventing Polysorbate-20 loss in drug substance and drug product is presented.     

Comparison and application of two microextractions based on syringe membrane filter

Two proposed syringe membrane filter solid phase microextraction and syringe membrane filter liquid/solid phase microextraction, coupled separately with high performance liquid chromatography, were developed for simultaneous enrichment and determination of the trace level of flavonoids in traditional Chinese medicine. In syringe membrane filter solid phase microextraction, the membrane of syringe membrane filter was served as a solid adsorption film to adsorb target analytes. And in syringe membrane filter liquid/solid phase microextraction, the membrane of syringe membrane filter was used as not only an adsorption phase, but also as a holder of extraction solvent to realize liquid‐solid synergistic extraction. The simple operation, rapid extraction, and little or no organic solvent consumption make the two approaches very interesting. To evaluate the two proposed approaches, the crucial parameters affecting the enrichment factors of target analytes were investigated and optimized, and the two microextractions were intercompared. Moreover, their microextraction mechanisms were analyzed and described. Under the optimized conditions, both the new approaches achieved good linearities, accuracies, precisions, and low limits of detection, and the two methods were successfully applied for concentration of the flavonoids in traditional Chinese medicines.     

Immobilization of oligonucleotides onto zirconia-modified filter paper and specific molecular recognition

A morphologically complex cellulosic substance (e.g., commercial filter paper) was employed as a substrate for DNA immobilization and successive recognition. A uniform ultrathin zirconia gel film was first deposited on each cellulose nanofiber in bulk filter paper by a facile sol-gel process. Relying on the large surface area of filter paper and the strong affinity of zirconia for the phosphate group, terminal-phosphate probe DNA was abundantly immobilized on the zirconia-modified filter paper so as to convert the composite to a biofunctional material for the sensitive and repetitive recognition of the corresponding complementary target DNA on the nanomolar level. By contrast, in spite of the viability of the immobilization of the probe DNA and the recognition of target DNA on the quartz plate, the amount of captured probe DNA or recognized target DNA on such a flat substrate was much less than that captured or recognized on filter paper, resulting in a relatively insensitive recognition event. Moreover, control experiments on bare filter paper (without a zirconia nanocoating) suggested that the zirconia gel film was essential to probe DNA immobilization and subsequent target DNA recognition.     

Structural and functional consequences of an amide-to-ester substitution in the selectivity filter of a potassium channel

The selectivity filter of K(+) channels comprises four contiguous ion binding sites, S1 through S4. Structural and functional data indicate that the filter contains on average two K(+) ions at any given time and that these ions reside primarily in two configurations, namely to sites S1 and S3 or to sites S2 and S4. Maximum ion flux through the channel is expected to occur when the energy difference between these two binding configurations is zero. In this study, we have used protein semisynthesis to selectively perturb site 1 within the filter of the KcsA channel through use of an amide-to-ester substitution. The modification alters K(+) conduction properties. The structure of the selectivity filter is largely unperturbed by the modification, despite the loss of an ordered water molecule normally located just behind the filter. Introduction of the ester moiety was found to alter the distribution of K(+), Rb(+,) and Cs(+) within the filter, with the most dramatic change found for Rb(+). The redistribution of ions is associated with the appearance of a partially hydrated ion just external to the filter, at a position where no ion is observed in the wild-type channel. The appearance of this new ion-binding site creates a change in the distance between a pair of K(+) ions some fraction of the time, apparently leading to a reduction in the ion conduction rate. Importantly, this finding suggests that the selectivity filter of a potassium channel is optimized both in terms of absolute ion occupancy and in terms of the separation in distance between the conducting ions.     

Synthesis of a copolymer with filter aid,dihydration, and scale inhibition abilities and its application to wet phosphoric acid

A new type of multifunction copolymer PAMA having filter aid, dihydration, and dynamic scale inhibition properties was synthesized using acrylamide (AM) and a homemade polyoxyethylene octylphenol ether acrylic ester (AOP) as the feedstock and persulfate as the initiator in an aqueous solution. The structure of the copolymer was characterized using FTIR and ¹H NMR spectroscopy. Scanning electron microscopy and the software Matlab 7.0 were used to investigate the influence of the copolymer on filter aid and scale inhibition. The results indicated that the copolymer consists of AM and AOP. The filtration rates of the phosphogypsum slurry increased 3.8 times compared to the blank group, and the water content of the phosphogypsum cake was reduced by 10.42% with the addition of 10 ppm of PAMA. The dynamic scale inhibition rate of sodium fluorosilicate and potassium fluorosilicate can reach up to 53.5% when the experiment runs continuously for 12 h. The experiments related to mechanism indicate that PAMA has a strong adsorbability and high bridge effect on the phosphogypsum crystals. Concurrently, PAMA can efficiently improve the microstructure of a filter cake and remove the scale layer of sodium fluorosilicate and potassium fluorosilicate adhering to the wall of a stainless steel pipe, which is beneficial for increasing the filter rate, decreasing the moisture content of the filter cake, and preventing scale layer formation on the filter.     

The preparation and performance of a UHV compatible helium 1 filter

The preparation and performance of a filter that effectively removes the 21.2 eV helium resonance line is described. The filter will withstand baking to a sufficiently high temperature to allow pressures in the low 10^?10 torr range to be achieved. The usefulness of the filter is demonstrated by the detection of a level at ≈ 25 eV in a thin film of ice.     

Optimal estimation of intensity of noisy peaks by matched filtering with application to chromatography : Part 1. General introduction and theoretical evaluations

The digital filter described provides optimal enhancement of the signal-to-noise ratio by using prior information about peak shape and type of noise. The filter, based onthe matched-filter principle, is applied to chromatographic data, but is also suitable for optimal processing of similar noisy signals. The current implementation of the filter permits the specific reduction of different types of noise. Several theoretical aspects concerning the interpretation and use of this advanced filter are discussed. Some calculations on peaks with Gaussian and Gamma distribution shape are given.     

Evaluation of filter papers as substrates for solid-surface room-temperature fluorimetry and photochemical fluorimetry

Filter papers (Whatman Nos. 1 and 41, S & S 904) and anion-exchange filter paper (Whatman DE-81) have been evaluated for their use as substrates in solid-surface room-temperature fluorescence (RTF) and photochemical fluorescence (RTPF). Several chemical treatments of filter papers are found not to reduce significantly their background fluorescence signal. Analyte fluorescence signals are 2-4 times higher on filter papers than on silica-gel TLC plates. Absolute limits of detection range between 0.6 and 40 ng on the Whatman filter papers, depending on the test compound. Filter papers are proposed as convenient, inexpensive, and easy-to-handle substrates for RTF and RTPF measurements.     

Automatic filtration and filter flush for robust online solid-phase extraction liquid chromatography

Online solid-phase extraction-liquid chromatography (SPE-LC) with microbore or capillary columns was significantly improved regarding robustness, as an easily installed automatic filtration and filter flushing (AFFL) procedure was added to avoid system clogging. Specifically, an injected sample is passed through a union containing a stainless steel filter prior to SPE trapping. The filter stops any particulate matter from reaching the SPE. When the SPE is subsequently connected to the LC column by column switching, a separate pump backflushes the filter-union, removing the particulate matter off the filter after each injection. This feature greatly reduced backpressure buildup over the entire system.     

Pressure and concentration profiles in filter cake consisting of core/shell latex particle

Poly(styrene-co-acrylic acid) latex particles with different acrylic acid contents have been synthesized and used for filtration studies. Effective pressure and dry matter concentrations were measured at different positions in the filter cakes during the filtration processes, and dry matter concentration was not found to change significantly with effective pressure. Nevertheless, the local dry matter concentration did increase with time for latex particles containing 1 and 3%, w/w acrylic acid, which indicate that filter cake comprising latex particles with a high acrylic acid content will creep during the filtration stage. The filter cakes were examined using stepped-pressure filtration experiments as well, and an almost instantaneous deformation of the filter cake was observed after the pressure step. Furthermore, a minor deformation was observed over the following 2 h for latex particles both containing and not containing acrylic acid. This is thought to be due to the rearrangement of particles in the filter cake.     

Preparation and properties of a biodegradable inferior vena cava filter

In this study, a new type of biodegradable inferior vena cava filter was designed and prepared based on polylactic acid. In addition to having the main functions of a common filter, it is also completely biodegradable in the human body without secondary surgical removal. The changes of surface morphology, molecular weight, viscosity, and radial support strength with degradation time were systematically investigated via degradation experiments in vitro. The results of crimping and expansion tests of the filter showed that reducing the crimping time and increasing the release time make it easier for the filter to recover to its original diameter. Further, the results of a thrombus capture experiment in vitro showed that the thrombus filtration ratio for the filter with double‐layer connection structure is 90%.