The Specific Heat Capacity,Effective Thermal Conductivity,Density, and Viscosity of Coolants Containing Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes

Obviously, the behavior of thermophysical properties of covalently functionalized CNT-based water and -based ethylene glycol (EG) nanofluids cannot be predicted from the predicted models. We present a study of the specific heat capacity, effective thermal conductivity, density, and viscosity of coolants containing functionalized multi-walled carbon nanotubes (CNT-COOH) with carboxylic acid groups at different temperatures. After synthesizing of CNT-COOH-based water and CNT-COOH-based EG nanofluids, measurements on the prepared coolant were made at various concentrations by different experimental methods. While the thermal conductivity of both nanofluids illustrated a significant increase, the specific heat capacity of both samples showed a downward behavior with increasing temperature. Although the thermal conductivity of CNT-COOH-based water nanofluids is bigger than CNT-COOH-based EG nanofluids, CNT-COOH-based water has weaker temperature dependence than that of the CNT-COOH-based EG nanofluids. The viscosity was investigated in different shear rates and temperatures. It is noteworthy that CNT-COOH-based EG nanofluids show relatively a non-Newtonian behavior. Interestingly, specific heat capacities of both prepared nanofluids were decreased with increasing concentration. Also, the density of the CNT-COOH-based water and -based EG nanofluids increased and decreased smoothly with increasing CNT-COOH concentration and temperature, respectively.     

Preparation and characterization of monodisperse solvent-free silica nanofluids

A series of solvent-free ionic silica (SiO₂) nanofluids of 12.3–17.3 nm in diameter were synthesized by surface functionalizing nanoscale SiO₂ with a charged corona and ionically tethering with oligomeric chains as canopy. The structure and properties of the nanofluids were systematically characterized by Fourier transform infrared (FTIR), differential scanning calorimeter (DSC), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and rheology tests. The resultant nanofluids with low-molecular-weight oligomeric as canopy are homogeneous, stable yellow-like fluids with no evidence of phase separation at room temperature, while other nanofluids containing high-molecular-weight as canopy behave like a soft glassy, and they exhibit fluidity with still high modulus and viscosity above 60°C. For deeper understanding of the nature of SiO₂ nanofluids, the rheological behavior, thermal stability, as well as morphology of SiO₂ nanofluids were investigated in details. The flow properties of nanofluids could be easily regulated from soft glassy to free flowing liquids by varying the molecule weight of canopy. Most importantly, the thermal stability, rheological behavior, as well as morphology can be also regulated through varying molecule weight and thickness of canopy, which will guide our future work on synthesis of nanofluids with controllable physical properties.     

A review on molten-salt-based and ionic-liquid-based nanofluids for medium-to-high temperature heat transfer

Molten-salt-based nanofluids and ionic-liquid-based nanofluids are developed for thermal storage and heat transfer at relatively high temperatures, in the past few years. Preparation and stabilization techniques are briefly introduced firstly, and then, thermal properties, e.g., specific heat, thermal conductivity and viscosity, are summarized and discussed in detail. The properties are not only affected by the characteristics of nanomaterials and base fluids, but also affected by the synthesis method, such as the sonication intensity and duration. Some of the thermophysical property data are still incomplete, especially the thermal conductivity of molten-salt-based nanofluids, and properties of ionic-liquid-based nanofluids at high temperatures. While several literature works show that the Krieger–Dougherty model can well predict the viscosity, no general models for thermal conductivity and specific heat have been developed yet for both types of nanofluids.

     

Synthesis and thermo-physical properties of water-based novel Ag/ZnO hybrid nanofluids

The comparative study on the thermo-physical properties of water-based ZnO nanofluids and Ag/ZnO hybrid nanofluids is reported in the present study. The outer surface of ZnO nanoparticles was modified with a thin coating of Ag nanoparticles by a wet chemical method for improved stability and heat transfer properties. The ZnO and Ag/ZnO nanofluids were prepared with varying volume concentration (??=?0.02–0.1%). The synthesized nanoparticles and nanofluids were characterized with different characterization methods viz., scanning electron microscopy, X-ray diffraction, dynamic light scattering, thermal conductivity measurement, and viscosity measurement. Results show that thermal conductivity of Ag/ZnO hybrid nanofluids is found to be significantly higher compared to ZnO nanofluids. The maximum thermal conductivity an enhancement for Ag/ZnO nanofluid (??=?0.1%) is found to 20% and 28% when it compared with ZnO nanofluid (??=?0.1%) and water, respectively.     

A novel one-step chemical method for preparation of copper nanofluids

This paper presents a novel one-step method for preparing of copper nanofluids by reducing CuSO(4).5H(2)O with NaH(2)PO(2).H(2)O in ethylene glycol under microwave irradiation. Nonagglomerated and stably suspended Cu nanofluids are obtained. The influences of CuSO(4) concentration, addition of NaH(2)PO(2), and microwave irradiation on the reaction rate and the properties of Cu nanofluids were investigated by transmission electron microscopy, infrared analysis, and sedimentation measurements. It is found to be a fast, efficient one-step chemical method to prepare Cu nanofluids.     

An intelligent approach to predicting the effect of nanoparticle mixture ratio,concentration and temperature on thermal conductivity of hybrid nanofluids

Journal of Thermal Analysis and Calorimetry - Hybrid nanofluids are better heat transfer fluids than conventional nanofluids because of the combined properties of two or more nanoparticles. In this...     

Influence of graphene oxide nanosheets on the stability and thermal conductivity of nanofluids

Journal of Thermal Analysis and Calorimetry - Many theoretical and experimental studies on heat transfer and flow behavior of nanofluids have been conducted, and the results show that nanofluids...     

Entropy generation of tangent hyperbolic nanofluid flow over a circular cylinder in the presence of nonlinear Boussinesq approximation: a non-similar solution

Journal of Thermal Analysis and Calorimetry - The analysis of entropy generation has received notable attention in the study of nanofluids because the prime objective of nanofluids is to admit high...     

Viscosity of carbon nanotube/water nanofluid

Journal of Thermal Analysis and Calorimetry - Special features of nanofluids as heat transfer media have made them very important. The first step for investigating nanofluids was to know the...     

Ionic-Liquid-Based Nanofluids and Their Heat-Transfer Applications: A Comprehensive Review

Due to the improved thermophysical characteristics of ionic liquids (ILs), such as their strong ionic conductivity, negligible vapor pressure, and thermal stability at high temperatures, they are being looked at viable contender for future heat transfer fluids. Additionally, the dispersing nanoparticles can further improve the thermophysical characteristics and thermal performance of ionic liquids, which is one of the emerging research interests to increase the heat transfer rates of the thermal devices. The latest investigations about the utilization of ionic liquid nanofluids as a heat transfer fluid is summarized in this work. These summaries are broken down into three types: (a) the thermophysical parameters including thermal conductivity, viscosity, density, and specific heat of ionic liquids (base fluids), (b) the thermophysical properties like thermal conductivity, viscosity, density, and viscosity of ionic liquids based nanofluids (IL nanofluids), and (iii) utilization of IL nanofluids as a heat transfer fluid in the thermal devices. The techniques for measuring the thermophysical characteristics and the synthesis of IL nanofluids are also covered. The suggestions for potential future research directions for IL nanofluids are summarized.     

The noble effect of aging on the thermal conductivity of modified CNTs-ethylene glycol nanofluids

In order to improve the heat transfer process by using nanofluids, different nanoparticles and base fluids have been studied. In this work, stability and effect of aging and temperature on the thermal conductivity of CNTs-ethylene glycol (EG) nanofluids were investigated. Chemical functionalisation was used to oxidise the surface of CNTs. The functionalised CNTs were used to prepare the nanofluids by a two-step method. The stability of nanofluids was measured by UV-vis spectroscopy and the results showed that the nanofluids had a good stability over several days. Immediately after nanofluid preparation not too much increase was observed for thermal conductivity but the nanofluid aging had a great influence on the improvement of the thermal conductivity, as after 65 days, about 50% increase was observed. The increase has been attributed to forming an ordered nanolayer of EG molecules around the CNTs. Also no significant temperature dependence of thermal conductivity was observed up to 50°C possibly due to the lack of temperature dependence of CNTs Brownian motions.     

A new semi-analytical model for effective thermal conductivity of nanofluids

A new theoretical model for thermal conductivity of nanofluids is developed incorporating effective medium theory, interfacial layer, particle aggregation and Brownian motion-induced convection from multiple nanoparticles/aggregates. The predicated result using aggregate size, which represents the particle size in the actual condition of nanofluids, fits well with the experimental data for water-, R113- and ethylene glycol (EG)-based nanofluids. The present model also gives much better predictions compared to the existing models. A parametric analysis, particularly particle aggregation, is conducted to investigate the dependence of effective thermal conductivity of nanofluids on the properties of nanoparticles and fluid. Aggregation is the main factor responsible for thermal conductivity enhancement. The dynamic contribution of Brownian motion on thermal conductivity enhancement is surpassed by that of static mechanisms, particularly at high volume fraction. Predication also indicated that the viscosity increases faster than the thermal conductivity, causing the highly aggregated nanofluids to become unfavourable, especially for d_f = 1.8.     

Investigating the effects of pH,surfactant and ionic strength on the stability of alumina/water nanofluids using DLVO theory

Journal of Thermal Analysis and Calorimetry - Alumina nanofluids are one of the most useful nanofluids. In order to evaluate the colloidal behavior of nanoparticles in alumina/water nanofluid, the...     

Study of capabilities of the ANN and RSM models to predict the thermal conductivity of nanofluids containing SiO2 nanoparticles

Journal of Thermal Analysis and Calorimetry - In this paper, thermal conductivity prediction of nanofluids is discussed by the RSM and ANN models. The nanofluids contain SiO2 nanoparticles, and...     

Effect of EM propagation medium on electrorheological characteristics of dielectric nanofluids

The effect of dielectric loss on the electrorheological (ER) characteristic of dielectric nanofluids under shear was studied. When nanofluids are activated by an applied electric field, it behaves like a non-Newtonian fluid under ER effect by creating the chains of nanoparticles. ER characteristics of ZnO and Al₂O₃ nanofluids with various nanoparticles concentration (0.1, 0.05, 0.01 wt%) were measured. For this purpose, a solenoid-based electromagnetic (EM) transmitter was used under different propagation media including air, tap water, and salt water. The result shows that all the nanofluids exhibit pseudo-plastic behavior, while the electric field causes a significant increase in viscosity in the presence of tap water, followed by salt water. Additionally, the viscosity of nanofluid shows a high dependence on particle loading. A possible mechanism was also proposed to describe the effect of dielectric properties on the ER behavior of dielectric nanofluids.     

Phenomenological formula for thermal conductivity coefficient of water-based nanofluids

A phenomenological formula has been proposed to describe the thermal conductivity of waterbased nanofluids. The formula has been derived based on available experimental data on nanofluids containing Al₂O₃ particles. It takes into account the dependence of the thermal conductivity coefficients of the nanofluids on both volume concentration and sizes of the particles. The formula has also been shown to describe with an accuracy of about 3% the thermal conductivity coefficients of nanofluids containing TiO₂, SiO₂, ZrO₂, and CuO particles with sizes of 8–150 nm and volume concentrations as high as 8%.     

Assessing colloidal stability of long term MWCNT based nanofluids

This report presents an assessment on colloidal stability of functionalized multiwalled carbon nanotubes based nanofluids. To this end, an innovative technique that allows for measurement of settling velocity during centrifugation is applied. This method also enables measurements without dilution, inferring further accuracy to the experimental study. The results suggest that functionalization techniques enable the production of highly stable nanofluids. It is also found, that the colloidal stabilities of these nanofluids are characterized by hindered settling. The settling velocity decreases when the nanoparticles volume fraction rises from 0.25% to 1.50% due to the increase of interparticle interaction. Furthermore, a high aspect ratio of nanoparticles directly contributed to an increase in colloidal stability. It is expected that these results may significantly contribute to proper tailor of nanofluids engineering, ensuring a long term stable dispersion enhancing industrial application suitability.     

A comprehensive investigation in determination of nanofluids thermophysical properties

In recent years, research on heat transfer and related equipment has been one of the topics of interest in many different industries. The use of conventional fluids in heat transfer due to their low thermal properties has created problems in this area, so the use of nanofluids in many cases has been a solution to overcome this problem. The parameters affecting the thermophysical and thermal properties of nanofluids are temperature, concentration, size, shape, pH, surfactant and ultrasonic time, among which temperature and concentration have the greatest effect. Existing models and studies in the field of nanofluids are limited to the type of nanoparticles and base fluids and their operating range, and there is no comprehensive model for predicting thermal properties. In the present study, models and theories regarding the determination of thermal conductivity of nanofluids and other thermophysical properties have been comprehensively compiled and the mechanisms for increasing the thermal properties as well as the effective parameters and the effect of each of them on improving the properties are presented. In general, the results showed that thermal properties improve with increasing concentration and temperature. Finally, the role of nanofluids effect on thermal performance in the heat exchangers is studied and the results are summarized.     

Investigation on rheological properties of carbon nanotube nanofluids

The effective viscosity of carbon nanotube nanofluids is strongly dependent on the temperature and concentration. The aggregation behaviour that carbon nanotubes exhibit in solution and the orientation variation of single carbon nanotube make rheological properties of nanofluids more complex. With the increase of shear rate, the degree of dispersion and orientation of carbon nanotubes will be improved. Based on previous studies and the fact mentioned above, a reasonable expression for viscosity of carbon nanotube nanofluids has been given, which is associated with the shear rate and aspect ratios of carbon nanotubes. The expression has been validated comparing with previous experimental data.     

Thermal analysis for heat transfer enhancement in electroosmosis-modulated peristaltic transport of Sutterby nanofluids in a microfluidic vessel

Viscosity plays a crucial role in the flow and heat transfer process of nanofluids. To effectively calculate and predict the changing characteristics of nanofluids viscosity, this study presents a theoretical model combining the static interface layer and dynamic Brownian motion mechanisms of spherical nanoparticles for water-based Newtonian nanofluids. The model describes the reasonable dependences of nanofluids viscosity on physical properties of nanoparticles (density, volume fraction, size) and base fluid (temperature, viscosity, density). Taking four kinds of typical water-based Newtonian nanofluids containing spherical oxide nanoparticles (Al₂O₃, CuO, SiO₂ and TiO₂) as examples, the prediction performance of different viscosity models is analyzed in detail. From the comparison studies, it is demonstrated that the new viscosity model developed in this paper can exhibit better prediction performance than many well-known theoretical models and empirical correlations. Not only do the predicted results of model agree well with the experimental data from various studies, but also the effects of different factors are reflected effectively.