Polymerization of Methyl Methacrylate by Charge-Transfer Mechanism with Amines and Carbon Tetrachloride

The charge-transfer complex formed between an amine and carbon tetrachloride can initiate the polymerization of vinyl monomers in a nonaqueous solvent such as dimethylsulfoxide. Here we use cyclopentylamine (CPA) and heptylamine (HA) as the donor compounds for charge-transfer initiation of the polymerization of methl methacrylate (MMA). The rate of polymerization R_p = k[MMA]¹ [amine]^0.5 [CCl₄]^0.5 when [CCl₄] [amine] ≤ 1; when [CCl₄] [amine] < 1, R_p becomes independent of [CCl₄] and R_p = k[MMA]^1.5 [amine]^0.5. The average constant at 60°C for the polymerization of MMA in terms of monomer were (1.66 ± 0.03) × 10^?5 and (1.46 ± 0.04) × 10^?5 s^?1 with CPA and HA, respectively, when [CCl₄] [amine] ≤ 1, and (1.16 ± 0.04) × 10^?5 and (1.39 ± 0.08) × 10^?1 L/mol·s when [CCl₄]/[amine] < 1.     

Kinetics and mechanism for the oxidation of 1,1,1-trichloroethane

The reaction mechanisms for oxidation of CH₃CCl₂ and CCl₃CH₂ radicals, formed in the atmospheric degradation of CH₃CCl₃ have been elucidated. The primary oxidation products from these radicals are CH₃CClO and CCl₃CHO, respectively. Absolute rate constants for the reaction of hydroxyl radicals with CH₃CCl₃ have been measured in 1 atm of Argon at 359, 376, and 402 K using pulse radiolysis combined with UV kinetic spectroscopy giving ??(OH + CH₃CCl₃) = (5.4 ± 3) 10^?12 exp(?3570 ± 890/RT) cm³ molecule^?1 s^?1. A value of this rate constant of 1.3 × 10^?14 cm³ molecule^?1 s^?1 at 298 K was calculated using this Arrhenius expression. A relative rate technique was utilized to provide rate data for the OH + CH₃ CCl₃ reaction as well as the reaction of OH with the primary oxidation products. Values of the relative rate constants at 298 K are: ??(OH + CH₃CCl₃) = (1.09 ± 0.35) × 10^?14, ??(OH + CH₃CClO) = (0.91 ± 0.32) × 10^?14, ??(OH + CCl₃CHO) = (178 ± 31) × 10^?14, ??(OH + CCl₂O) < 0.1 × 10^?14; all in units of cm³ molecule^?1 s^?1. The effect of chlorine substitution on the reactivity of organic compounds towards OH radicals is discussed.     

Protective effects of vitamin E against CCl<Subscript>4</Subscript>-induced hepatotoxicity in rabbits

The influence of CCl₄ on the activity of superoxide dismutase (SOD), glutathione peroxidase (GPx), glutathione reductase (GR), the value of the total antioxidant status (TAS), and the concentration of malonic dialdehyde (MDA) and glutathione (GSH) was monitored in plasma or whole blood of rabbits. The administration of CCl₄ caused the increase of the SOD activity to approximately 150 % and the decrease in the activity of GPx and GR by about 50 %. These changes were accompanied with the increase in TAS value and MDA concentration and the decrease of GSH concentration. The effect of CCl₄ was suppressed by the previous 7 days lasting or simultaneous administration of vitamin E. Oxidative stress caused by CCl₄ was accompanied by the development of reactive oxygen forms, especially superoxide radical anion.     

Kinetics and mechanism of the thermal gas-phase reaction between trifluoromethylhypofluorite,CF3OF,and tetrachloroethene

The thermal gas-phase reaction of CF₃OF with CCl₂CCl₂ has been studied between 313.8 and 343.8 K. The initial pressure of CF₃OF was varied between 10.8 and 77.5 torr and that of CCl₂CCl₂ between 3.7 and 26.8 torr. CF₃OF was always present in excess, varying the initial ratio of CF₃OF to that of CCl₂CCl₂ from 1.3 to 10. Three products were formed: CF₃OCCl₂CCl₂F, CCl₂FCCl₂F, and CF₃O(CCl₂CCl₂) ₂OCF₃. The yields of CF₃OCCl₂CCl₂F were 98–99.5%, based on the sum of the products. The reaction was a homogeneous chain reaction not affected by the total pressure. In presence of O₂ the oxidation of CCl₂CCl₂ to CCl₃C(O)Cl and COCl₂ occurred. The proposed basic reaction steps are: generation of the radicals CF₃O˙ and CCl₂FCCl₂˙ (κ₁) in a biomolecular process between CF₃OF and CCl₂CCl₂, formation of the radical CF₃OCCl₂CCl₂˙ by addition of CF₃O˙ to CCl₂CCl₂, chain generation of CF₃O˙ by abstraction of fluorine atom from CF₃OF by CF₃OCCl₂CCl₂˙ (κ₄), and chain termination by recombination of the radicals CF₃OCCl₂CCl₂˙. The expressions obtained for the constants κ₁ and κ₄ are κ₁ = 3.16 ± 0.6 × 10⁷ exp(−15.2 ± 1.7 Kcal mol⁻¹/RT) dm³ mol⁻¹ s⁻¹, κ₄ = 3.7 ± 0.5 × 10⁹ exp(−6.0 ± 1.1 Kcal mol⁻¹/RT) dm³ mol⁻¹ s⁻¹. © 1996 John Wiley & Sons, Inc.     

FTIR study of the Cl- and Br-atom initiated oxidation of trichloroethylene

The Cl- and Br- initiated oxidations of CHCl(DOUBLEBOND)CCl₂ in 700 torr of air at 296 K have been studied using a Fourier transform infrared spectrometer. Rate constants k(Cl+CHCl(DOUBLEBOND)CCl₂)=(7.2±0.8)×10⁻¹¹ and k(Br+CHCl(DOUBLEBOND)CCl₂)=(1.1±0.4)×10⁻¹³ cm³ molecule⁻¹ s⁻¹ were determined using a relative rate technique with ethane and ethylene as references, respectively. The major products observed were CHXClC(O)Cl, (X=Cl or Br), CHClO, and CCl₂O. Combining results obtained for the Cl-initiated oxidation of CHCl₂(SINGLEBOND)CHCl₂, we deduced that Cl-addition on trichloroethylene occurs via channel 1a, Cl+CHCl(DOUBLEBOND)CCl₂→ CHCl₂(SINGLEBOND)CCl₂, (100±12)%. Self-reaction of the subsequently generated peroxy radicals CHCl₂(SINGLEBOND)CCl₂O₂ leads to CHCl₂CCl₂O radicals which were found to decompose via channel 8a, CHCl₂C(O)Cl+Cl, (91±11)% of the time, and channel 8b, CHCl₂+CCl₂O, (9±2)%. The reaction Br+CHCl(DOUBLEBOND)CCl₂→CHBrCl(SINGLEBOND)CCl₂ (17a) accounted for ≥(96±11)% of the total reaction. Decomposition of the CHBrCl(SINGLEBOND)CCl₂O radicals proceeds (≥93±11)% via CHBrClC(O)Cl+Cl. As part of this work, k(Cl+CHCl₂C(O)Cl)=(3.6±0.6)×10⁻¹⁴ and k(Cl+CHCl₂(SINGLEBOND)CHCl₂)=(1.9±0.2)×10⁻¹³ cm³ molecule⁻¹ s⁻¹ were measured. Errors reported above include statistical uncertainties (2σ) and estimated systematic uncertainties. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet: 29: 695–704, 1997.     

Kinetics of the reactions of CCl3 with O and O2 and of CCl3O2 with NO at 295 K

The reactions of CCl₃ with O(³P) and O₂ and those of CCl₃O₂ with NO have been studied at 295 K using discharge flow methods with helium as the bath gas. The rate coefficient for the reaction of CCl₃ with O was found to be (4.2 ± 0.6) × 10^?11 cm³/s and that for CCl₃O₂ with NO was (18.6 ± 2.8) × 10^?12 cm³/s with both coefficients independent of [He]. For reaction between CCl₃ and O₂ the rate coefficient was found to increase from 1.51 7times; 10^?14 cm³/s to 7.88 × 10^?14 cm³/s as the [He] increased from 3.5 × 10¹⁶ cm^?3 to 2.7 × 10¹⁷ cm^?3. There was no evidence for a direct two-body reaction, and it is concluded that the only product of this reaction is CCl₃O₂. Examination of these results for CCl₃ + O₂ in terms of current simplified falloff treatment suggests that the high-pressure limit for this reaction is ～ 2.5 × 10^?12 cm³/s, which may be compared with a direct measurement of the high-pressure limit of 5 × 10^?12 cm³/s. A value of (5.8 ± 0.6) × 10^?31 cm⁶/s has been obtained for k₀, the coefficient in the low-pressure region. This value is compared with corresponding values found earlier for the (CH₃, O₂) and (CF₃, O₂) systems and with estimates based on unimolecular rate theory.     

Charge-transfer polymerization of butyl methacrylate

Butyl methacrylate (BuMA) can be polymerized by charge-transfer complexes formed by the interaction of ethanolamine (EA), BuMA, and carbon tetrachloride (CCl₄) in a non-aqueous solvent, such as N,N-dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). The rate of polymerizationR _p is found to be linear with [BuMA] and proportional to both [CCl₄]^0.5 and [EA]^0.5 when [CCl₄]/[EA]≤1.R _p becomes independent of [CCl₄] when [CCl₄]/[EA]>1.R _p is proportional to [EA]^0.56 and to [BuMA]^1.30 when [CCl₄]>[EA]. The average rate constant at 30°C for the polymerization of BuMA in terms of monomer was 3.32×10⁻⁶ s⁻¹ when [CCl₄]/[EA]≤1, and 5.47×10⁻⁶ L/(mol s) when [CCl₄]/[EA]>1.     

Hepatoprotective Effect of β-Chitosan from Gladius of Sepioteuthis lessoniana Against Carbon Tetrachloride-Induced Oxidative Stress in Wistar Rats

Chitosan has attracted much attention as a biomedical material, owing to its unique biological activities. In this study, hepatoprotective effect of β-chitosan obtained from the gladius of squid Sepioteuthis lessoniana was studied against carbon tetrachloride (CCl₄)-induced oxidative stress and liver injury in rats. The rats that received β-chitosan along with the administration of CCl₄ showed significantly decreased plasma and tissue alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities and total cholesterol, triglyceride (TG) and free fatty acid (FFA) contents, whereas the treatment with β-chitosan alone markedly increased rat hepatic and circulatory superoxide dismutase (SOD), catalase and glutathione peroxidase (GPx) and reduced glutathione (GSH) levels and decreased the malondialdehyde level. Histopathological observations recommended the marked hepatoprotective effect of β-chitosan. The CCl₄-induced alterations on circulatory and hepatic antioxidant defence system were normalised by β-chitosan, and it could be concluded that the hepatoprotective effect of chitosan may be due to its antioxidant and antilipidemic property. Therefore, β-chitosan could be considered as antihepatotoxic agent.     

Plasma-chemical reactions in weakly decomposed CCl4

For the case of weak feed gas decomposition, where the concentration of CCl₄ exceeds those of decomposition and built-up products, the emission of CCl* is shown to originate from dissociative excitation of CCl₄. With electron concentration measured independently, the kinetics of CCl₄ decomposition has been extracted from the time dependence of the CCl* intensity. Supported by EPR determinations of radical concentrations in rapidly flowing CCl₄ and CCl₄/O₂ afterglows, the primary decomposition reaction is shown to be the electron impact dissociation into CCl₃ and Cl. Its rate constant (k ₁=4×10^–8 cm³s^–1) indicates strongly that dissociative electron attachment is the main reaction channel at least at r.f. power densities just above the threshold of a self-maintaining discharge. At extremely low mean electron energies the emission of a continuum is observed, which is tentatively ascribed to the radiative CCl₃-Cl recombination.     

On the mechanism of the Kharash reaction catalyzed by Fe(CO)5

Fe(CO)₅ is sufficiently stable at 80 °C in benzene solution and its thermal decomposition is not accelerated in the presence of phenyl cinnamate or/and DMF. The decomposition is accelerated by CCl₃Br (drastically) and by CCl₄ (to a lesser extent). DMF accelerates the reaction of Fe(CO)₅ with CCl₄. The (FeCl(DMF)₅]²⁺[Cl₃FeOFeCl₃]^2– complex has been isolated as a product; its composition and structure have been determined by X-ray analysis. The obtained data indicate the absence of coordination of DMF or/and an olefin with Fe⁰ species at the stage preceding oxidation. The mechanisms of the generation of CCl₃ radicals in thermal and photochemical Kharash reactions in the presence of Fe(CO)₅ are basically different. The probable pathways of the effect of DMF on the rate of the oxidative decomposition of Fe(CO)₅ are discussed.For Part 2, see Ref. 1.Translated from IzvestiyaAkademii Nauk. Seriya Khimicheskaya, No. 4, pp. 916–919, April, 1996.     

Rate coefficient for the reaction of CCl3 radicals with ozone

The rate coefficient for the reaction of CCl₃ radicals with ozone has been measured at 303 ± 2 K. The CCl₃ radicals were generated by the pulsed laser photolysis of carbon tetrachloride at 193 nm. The time profile of CCl₃ concentration was monitored with a photoionization mass spectrometer. Addition of the O₃–O₂ mixture to this system caused a decay of the CCl₃ concentration because of the reactions of CCl₃ + O₃ → products (5) and CCl₃ + O₂ → products (4). The decay of signals from the CCl₃ radical was measured in the presence and absence of ozone. In the absence of ozone, the O₃–O₂ mixture was passed through a heated quartz tube to convert the ozone to molecular oxygen. Since the rate coefficient for the reaction of CCl₃ + O₂ could be determined separately, the absolute rate coefficient for reaction ( 5 ) was obtained from the competition among these reactions. The rate coefficient determined for reaction ( 5 ) was (8.6 ± 0.5) × 10^?13 cm³ molecule^?1 s^?1 and was also found to be independent of the total pressure (253–880 Pa of N₂). This result shows that the reaction of CCl₃ with O₃ cannot compete with its reaction with O₂ in the ozone layer. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 310–316, 2003     

Molecular fragmentations: Part IV. The mass spectral fragmentation of carbon tetrachloride

MINDO/3 calculations have been made of the molecular structures and energies of seven isomeric forms of the molecular cation (CCl₄)⁺, of the mass spectral fragment pairs:

and also of a number of neutral fragment pairs. Reaction energy profiles have been calculated for two fragmentations of (CCl₄)⁺, into [(CCl₂)⁺ + Cl₂], and into [(CCl₃)⁺ + Cl^?], in the latter of which the reaction proceeds via a rather stable intermediate; for the fragmentation of three electronic states of (CCl₃)⁺ into [(CCl₂)⁺ + Cl^?], where the ground singlet state and first triplet state of (CCl₃⁺ yield the ground doublet state of (CCl₂)⁺, but the first excited singlet of (CCl₃)⁺ yields the first excited doublet of (CCl₂)⁺ ; and for the fragmentation of the ground state of (CCl₃)⁺ into [(CCl)⁺ + Cl₂].     

A sensitive spectrophotometric method for determination of carbon tetrachloride with the aid of ultrasonic decolorization of methyl orange

A sensitive method for carbon tetrachloride (CCl₄) determination has been developed with the aid of ultrasonic oxidation decolorization of methyl orange (MO). It is found that the ultrasonic oxidation decolorization rate of MO can be significantly promoted by adding a little amount of CCl₄. The increased ultrasonic decolorization rate of MO is strongly dependent on the concentration of CCl₄ added, and a linear correlation is observed between the amount of CCl₄ and the decolorization rate of MO in the ultrasonic oxidation process. Thus, the CCl₄ determination is transformed to a simple and direct determination of the decoloration extent of MO solution at a given concentration. As an indirect spectrophotometric determination of CCl₄, the new method is sensitive and easy of operation with a maximum wavelength of 508 nm, molar absorptivity of 3.83 × 10⁴ L mol⁻¹ cm⁻¹, and a Sandell sensitivity of 7.96 × 10⁻³ μg cm⁻². Under optimized conditions, Beer's law is obeyed in the range of 0.4-20 mg L⁻¹ of CCl₄ (DL = 0.19 mg L⁻¹, r = 0.9996). The concentrations of CCl₄ in several practical samples have been determined satisfactorily by using this method.     

Kinetics and mechanism in the decomposition of CCl4 in a radio-frequency pulse discharge

In the decomposition of CCl₄ in an r.f. pulse discharge the observation of time-resolved absorption spectra of the CCl radical allowed concentration measurements and a kinetic and mechanistic investigation of the system. Kinetic spectroscopy and end product analysis, with computer simulation of proposed mechanisms, indicates that the major decomposition reaction is CCl₄»CCl+3Cl (Cl₂+Cl), with a minor contribution from CCl₄»CCl₂+2Cl. Radical concentrations were of the order of 10^–7 mol dm^–3 (10¹⁴ molec. cm^–3). CCl removal was kinetically second order with a rate coefficient value of (3.7±8)×10¹⁰ mol^–1 dm^–3 s^–1 at 295±3 K at gas pressure 0.1 torr.     

Atmospheric chemistry of CCl2FCH2CF3 (HCFC-234fb): Kinetics and mechanism of reactions with Cl atoms and OH radicals

The atmospheric chemistry of CCl₂FCH₂CF₃ (HFCF-234fb) was examined using FT-IR/relative-rate methods. Hydroxyl radical and chlorine atom rate coefficients of k(CCl₂FCH₂CF₃+OH)= (2.9 ± 0.8) × 10⁻¹⁵ cm³ molecule^–1 s^–1 and k(CCl₂FCH₂CF₃+Cl)= (2.3 ± 0.6) × 10⁻¹⁷ cm³ molecule^–1 s^–1 were determined at 297 ± 2 K. The OH rate coefficient determined here is two times higher than the previous literature value. The atmospheric lifetime for CCl₂FCH₂CF₃ with respect to reaction with OH radicals is approximately 21 years using the OH rate coefficient determined in this work, estimated Arrhenius parameters and scaling it to the atmospheric lifetime of CH₃CCl₃. The chlorine atom initiated oxidation of CCl₂FCH₂CF₃ gives C(O)F₂ and C(O)ClF as stable secondary products. The halogenated carbon balance is close to 80% in our system. The integrated IR absorption cross-section for CCl₂FCH₂CF₃ is 1.87 × 10⁻¹⁶ cm molecule⁻¹ (600–1600 cm⁻¹) and the radiative efficiency was calculated to 0.26 W m⁻² ppb¹. A 100-year Global Warming Potential (GWP) of 1460 was determined, accounting for an estimated stratospheric lifetime of 58 years and using a lifetime-corrected radiative efficiency estimation.     

Photopolymerization of Pyrrole Initiated by the Ferrocene- and Iron-Arene Salts-Chlorinated Solvents Complexes

Abstract

Ferrocene- and iron-arene salts can photoinitiate polymerization of pyrrole in the presence of halogenated solvents, such as CH₂CH₂Cl₂, CHCl₃, and CCl₄, when irradiated with UV light (254 nm). The polypyrroles obtained are black colloidal powders and have low conductivity in the range of 10^?5 S cm^?1 and rather poor electrochemical properties, which can be the result of loss of conjugation by halogenation. Polypyrrole samples contain both covalently bounded CCl₃ groups (from CCl₄) and ionic FeCl^? ₄. A mechanism of photoinitiated polymerization of pyrrole has been proposed.     

Spectrophotometric determination of carbon tetrachloride via ultrasonic oxidation of iodide accelerated by dissolved carbon tetrachloride

Ultrasonic oxidation of iodide was investigated in the presence of carbon tetrachloride (CCl₄). The ultrasonic oxidation of potassium iodide led to formation of iodine and then I₃⁻ in the presence of excess iodide, and the generated I₃⁻ shows strong UV absorption with a molar absorptivity of 2.31 × 10⁴ L mol⁻¹ cm⁻¹ at the maximum absorption wavelength of 351 nm. The ultrasonic oxidation of iodide was found to be significantly promoted by a small addition of CCl₄, and it was further found that the generation rate was increased with the amount of CCl₄ added. This can be used to analyze the level of CCl₄ dissolved in aqueous solutions. Under optimum conditions, the concentration of generated iodine (or its absorption at 351 nm) was found to correlated linearly with the concentration of CCl₄ in the range of 0.2-50 mg L⁻¹ (detection limit = 0.09 mg L⁻¹, R² = 0.999). As an alternative indirect spectrophotometric method of CCl₄ determination, the proposed method was successfully applied to determine the concentrations of CCl₄ in several practical samples, showing merits of being sensitive and simple of operation.     

CCl<Subscript>4</Subscript> Decomposition in RF Thermal Plasma in Inert and Oxidative Environments

The decomposition of carbon tetrachloride was investigated in an RF inductively coupled thermal plasma reactor in inert CCl₄–Ar and in oxidative CCl₄–O₂–Ar systems, respectively. The exhaust gases were analyzed by gas chromatography-mass spectrometry. The kinetics of CCl₄ decomposition at the experimental conditions was modeled in the temperature range of 300–7,000 K. The simulations predicted 67.0 and 97.9% net conversions of CCl₄ for CCl₄–Ar and for CCl₄–O₂–Ar, respectively. These values are close to the experimentally determined values of 60.6 and 92.5%. We concluded that in RF thermal plasma much less CCl₄ reconstructed in oxidative environment than in an oxygen-free mixture.     

Antioxidant Activity and Anti-Apoptotic Effect of the Small Molecule Procyanidin B1 in Early Mouse Embryonic Development Produced by Somatic Cell Nuclear Transfer

As an antioxidant, procyanidin B1(PB1) can improve the development of somatic cell nuclear transfer (SCNT) embryos; PB1 reduces the level of oxidative stress (OS) during the in vitro development of SCNT embryos by decreasing the level of reactive oxygen species (ROS) and increasing the level of glutathione (GSH) and mitochondrial membrane potential (MMP). Metabolite hydrogen peroxide (H₂O₂) produces OS. Catalase (CAT) can degrade hydrogen peroxide so that it produces less toxic water (H₂O) and oxygen (O₂) in order to reduce the harm caused by H₂O₂. Therefore, we tested the CAT level in the in vitro development of SCNT embryos; it was found that PB1 can increase the expression of CAT, indicating that PB1 can offset the harm caused by oxidative stress by increasing the level of CAT. Moreover, if H₂O₂ accumulates excessively, it produces radical-(HO-) through Fe^2+/3+ and damage to DNA. The damage caused to the DNA is mainly repaired by the protein encoded by the DNA damage repair gene. Therefore, we tested the expression of the DNA damage repair gene, OGG1. It was found that PB1 can increase the expression of OGG1 and increase the expression of protein. Through the above test, we proved that PB1 can improve the repairability of DNA damage. DNA damage can lead to cell apoptosis; therefore, we also tested the level of apoptosis of blastocysts, and we found that PB1 reduced the level of apoptosis. In summary, our results show that PB1 reduces the accumulation of H₂O₂ by decreasing the level of OS during the in vitro development of SCNT embryos and improves the repairability of DNA damage to reduce cell apoptosis. Our results have important significance for the improvement of the development of SCNT embryos in vitro and provide important reference significance for diseases that can be treated using SCNT technology.     

Polymerization of methyl methacrylate by charge-transfer complex using n-butyl amine and carbon tetrachloride in dimethylsulphoxide

The charge-transfer complex formed by the interaction of an aliphatic amine, such as n-butylamine (nBA), and carbon tetrachloride (CCl₄) in dimethylsulphoxide (DMSO) initiates polymerization of methyl methacrylate (MMA) at 30°. The rate of polymerization is given by R_p = k[MMA]^0.83 [nBA]^0.5 [CCl₄]^0.5 when [CCl₄]/[nBA] is ? 1. When [CCl₄]/[nBA] > 1, R_p is independent of [CCl₄] and R_p = k[MMA]^1.46 [nBA]^0.5. The average rate constants are (1.42 ± 0.05) × 10^?6 1 mol^?1 sec^?1 in terms of MMA and (2.20 ± 0.06) × 10^?6 sec^?1 at 30° for higher and lower concentration of carbon tetrachloride respectively. A charge-transfer mechanism for polymerization is suggested.