Molecular ionization-dissociation of fluoranthene at 266 nm: Energetic and dissociative pathways

Experimental studies have been carried out for nanosecond 266-nm laser-induced photoionization and dissociation of fluoranthene, C₁₆H₁₀ with pulse energies from 0.5 to 20 mJ using a time of flight mass spectrometer. The fragmentation patterns have been characterized and discussed with respect to the number of absorbed photons. They fall into three regimes. The first regime involves low energy processes, where the molecular parent ion promptly dissociates, resulting in the formation of Cm⁺Hn(m=11−15) by a process where up to two photons are absorbed. The second regime involves intermediate energy, where dissociative processes are activated by up to three-photon absorption and produce a second group of daughter ions: C10⁺Hn, C₉⁺Hn, and C₈⁺Hn. Finally, there is a third dissociative process, characterized by the absorption of up to four photons, producing C₇⁺Hn, C₆⁺Hn, C₅⁺Hn, C₄⁺Hn, and C₃⁺Hn. Most of the detected ions are of the form Cm⁺Hn with m < n. Total deprotonation has also been observed. The mechanism proposed involves the dissociation of the parent ion, which then dissociates by different competitive channels. Helium, neon and argon were used as carrier gases (CG). A detailed discussion is presented regarding the use of He as the CG. The laser pulse intensity allows the absorption of up to nine photons, observed through the formation of multiply charged ions of some of the CG atoms.     

Quantitative determination of toluene,ethylbenzene, and xylene degradation products in contaminated groundwater by solid-phase extraction and in-vial derivatization

Benzylsuccinic acid (BSA) and methylbenzylsuccinic acids (mBSAs) are unambiguous indicators of anaerobic toluene and ethylbenzene/xylene degradation, and so the determination of these compounds in landfill leachates and contaminated groundwater is highly relevant. Samples were diluted to <0.8?mS?cm^?1 in order to reduce their ionic strength, and subsequently extracted through strong anion exchange disks, followed by simultaneous in-vial elution and methylation. A detection limit of 0.1?µg?L^?1 was obtained for 100?mL samples. Using this method, 19.3?µg?L^?1 of BSA was measured in a landfill leachate, and low µg?L^?1 levels of all of the mBSAs were measured in gasoline-contaminated groundwater. The results were compared with the findings of BSAs at 16 other contaminated sites, and BSAs as indicators of biodegradation were evaluated. The estimation of biodegradation rates based on parent hydrocarbons and BSA concentrations or ratios is questionable. However, the degradation products serve as good qualitative in situ indicators for anaerobic biodegradation in contaminated groundwater.     

Complete 1H and 13C NMR assignments of aurasperone A and fonsecinone A, two bis-naphthopyrones produced by Aspergillus aculeatus

Complete assignments of 1H and 13C NMR chemical shifts of the polyketides aurasperone A and fonsecinone A were made by means of nuclear Overhauser enhancement and heteronuclear NMR correlation experiments. These compounds were isolated for the first time from Aspergillus aculeatus, an endophytic fungus obtained from leaves of Melia azedarach(Meliaceae).     

Synthesis of 1‐amino‐2‐methylindoline by Raschig process: Parallel reactions,modeling, and optimization

The reaction between chloramine and 2‐methylindoline was studied at pH 12.89, T = 40°C, and for different initial concentrations of reactants. The interaction includes two concurrent bimolecular mechanisms leading to 1‐amino‐2‐methylindoline and 2‐methylindole. The rate laws were determined at the first moments of the reaction by using a differential method. By considering the totality of the reactions that occur in the medium, an appropriate mathematical model was developed. It permits to follow the evolution of the system over time and to calculate the final yields of reaction products. An optimization in terms of the initial contents of 2‐methylindoline and chloramine was performed. It indicated that the maximum yield of 1‐amino‐2‐methylindoline does not exceed 56%. The results show the limit of the Raschig process for the synthesis of indolic hydrazines in aqueous medium. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 575–584, 2002     

Synthesis,design of experiments and optimization of heterogeneous Fenton-like degradation of tartrazine by MgFe2O4 nano-catalyst

In this work, magnesium ferrites nanoparticles (MgFe₂O₄ NPs) were successfully fabricated by sol-gel auto-combustion (SGAC) method and were used in heterogeneous Fenton-like degradation of tartrazine. The obtained products were characterized using XRD, FTIR, SEM and EDX. XRD studies confirmed that the synthesized MgFe₂O₄ NPs had a cubic spinel structure. The average crystallite size was evaluated using the Debyee Scherrer formula and found to be in the range 16.18–28.55 nm. In FTIR spectra, two primary absorption bands at 571 cm^?1 and 415 cm^?1 were observed. The spinel ferrites are characterized by these bands and the EDX confirms the presence of the desired elements Mg, Fe, and O. The influences of operating parameters were examined using the Box Behnken statistical design (BD), including magnesium ferrite dosage (0.04–0.12 g/L), tartrazine concentration (30–50 mg/L) and H₂O₂ concentration (3.53–7.06 mM). Using analysis of variance, a significant quadratic model was created. Optimum conditions were magnesium ferrite dosage of 0.092 g/L, tartrazine concentration of 30.21 mg/L and H₂O₂ concentration of 6.66 mM, respectively. The predicted degradation efficiency within the optimum conditions as established by the suggested model was 98.4%. Confirmatory tests were carried out and the degradation efficiency of 98.9% was observed, which was in good agreement with the model's prediction. After five recuperation and reapplications, the catalyst's degradation efficiency remains stable. These findings indicate that a heterogeneous Fenton-like process utilizing MgFe₂O₄ is effective in advanced wastewater treatment.     

Efficient Fe/CuFeO2/rGO nanocomposite catalyst for electro‐Fenton degradation of organic pollutant: Preparation,characterization and optimization

The nanocomposite of zero‐valent iron and delafossite CuFeO₂ supported on reduced graphene oxide was synthesized for the first time to evaluate its performance as the heterogeneous catalyst toward electro‐Fenton (EF) removal of catechol. X‐ray diffraction, Fourier transform‐infrared, scanning electron microscopy and Brunauer–Emmett–Teller (BET) were used to characterize the nanocomposite. It was found that the rhombohedral structure of CuFeO₂ remained stable during the nanocomposite preparation. The BET surface area of the nanocomposite increased about 102 times in comparison with bare CuFeO₂. The influence of the operating parameters was investigated. The optimum operating conditions were pH 3, Fe/CuFeO₂/rGO: 1 g/l; catechol: 7.5 × 10^?4 mol/l; and I: 150 mA, which led to 99% and 78.4% catechol and chemical oxygen demand removal in 120 min, respectively. The stability of the catalyst by leaching measurements was studied. Only 2% and 3.1% of iron and copper, respectively, was leached in the solution. The obtained results introduced Fe/CuFeO₂/rGO as a stable and appropriate catalyst for removal of organic compounds by the EF process. It was inferred from the scavenger utilization that hydroxyl radical plays a major role in catechol elimination and EF reaction followed by the Haber–Weiss mechanism at optimum conditions. The gas chromatography–mass spectrometry analysis was performed to detect the intermediate products, and an acceptable degradation pathway was proposed. The EF degradation of catechol follows a pseudo‐first‐order kinetics model with a rate constant of 3.69 × 10^?2 min^?1 for the optimum operating conditions. The reusability of Fe/CuFeO₂/rGO was investigated for six cycles, and the catalytic efficiency almost remained.     

Synthesis and behaviour of hybrid polymer-silica membranes made by sol gel process with adsorbed carbonic anhydrase enzyme,in the capture of CO<Subscript>2</Subscript>

Thin nylon-SiO₂ membranes made by sol–gel SiO₂ coating of a nylon weaving were impregnated in a second step with an aqueous carbonic anhydrase solution. The biocatalytic hybrid membranes obtained were applied to the capture of CO₂ from a N₂–CO₂ gas mixture containing 10% CO₂, under a total pressure ≈ 1 atm. The CO₂ permeance of these membranes was at least similar to those previously reported for liquid membranes. When impregnated with a 0.2 mg mL⁻¹ enzyme solution in a pH ≈ 8 NaHCO₃ buffer, the permeance of a nylon-SiO₂ membrane was multiplied by a factor ≈ 3 when the buffer molarity was increased from 0.1 to 1 M. By comparison, this permeance only increased by a factor ≈ 1.3 without any enzyme in the same buffers. The permeance was also higher with the enzyme than without it: respectively ≈3.7 10⁻⁸ and ≈4.7 10⁻⁹ mol \textm_{\textmembrane} ^{- 2} {\text{m}}_{\text{membrane}}^{{^{ - 2} }} s⁻¹ Pa⁻¹ with and without enzyme, in a 1 M NaHCO₃ buffer. A maximum permeance was observed for an enzyme concentration of ≈0.2 mg mL⁻¹, possibly due to a competition between the H⁺ ions produced from CO_2,aq by the enzyme and the H⁺ captured by the buffer. Besides, when the SiO₂–CO₂ contact was enhanced by the membrane architecture, SiO₂ improved the CO₂ permeance. The influence of an in situ CaCO₃ deposit was also investigated and it improved the CO₂ permeance when no enzyme was added.     

Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

The role of copper(II) and zinc(II) in the degradation of human and murine IAPP by insulin‐degrading enzyme

Amylin or islet amyloid polypeptide (IAPP) is a 37‐residue peptide hormone secreted from the pancreatic islets into the blood circulation and is cleared by peptidases in the kidney. IAPP aggregates are strongly associated with β‐cell degeneration in type 2 diabetes, as demonstrated by the fact that more than 95% of patients exhibit IAPP amyloid upon autopsy. Recently, it has been reported that metal ions such as copper(II) and zinc(II) are implicated in the aggregation of IAPP as well as able to modulate the proteolytic activity of IAPP degrading enzymes. For this reason, in this work, the role of the latter metal ions in the degradation of IAPP by insulin‐degrading enzyme (IDE) has been investigated by a chromatographic and mass spectrometric combined method. The latter experimental approach allowed not only to assess the overall metal ion inhibition of the human and murine IAPP degradation by IDE but also to have information on copper‐ and zinc‐induced changes in IAPP aggregation. In addition, IDE cleavage site preferences in the presence of metal ions are rationalized as metal ion‐induced changes in substrate accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Modeling and optimization of simultaneous degradation of rhodamine B and acid red 14 binary solution by homogeneous Fenton reaction: a chemometrics approach

This study aimed to propose a mathematical method to investigate and optimize the simultaneous elimination process of multiple organic pollutants using the Fenton process. Hence, the treatment of rhodamine B (RB) and acid red 14 (AR14) dyes in their binary solution was studied. Multivariate curve resolution alternating least square (MCR-ALS), a novel chemometric method, was applied along with correlation constraints to resolute the UV-Vis spectrophotometric data, enabling quantification of investigated dyes despite a high spectral overlapping. Response surface methodology was adopted to assess the model and optimize individual and interactive effects of three independent factors (Fe²⁺, H₂O₂ and initial pH) on the simultaneous elimination of RB and AR14. The values of the regression coefficient for RB and AR14 were determined as 98.48 and 98.67 percent, respectively, revealing the reliability of the obtained polynomial models to predict decolorization efficiencies. Desirability function was employed to optimize the independent variables to attain the highest possible degradation performance for both dyes in their binary solution. At the optimum point of operation ([Fe²⁺] = 143.88 mg/L, [H₂O₂] = 126.89 mg/L and pH = 3.71), degradation efficiencies of RB and AR14 were found as 81.58% and 80.22%, respectively, which were nearly identical to the experimental results.     

Structural characterization of C-S-H and C-A-S-H samples—Part II: Local environment investigated by spectroscopic analyses

Spectroscopic studies (¹H, ²³Na and ²⁷Al MAS NMR and Raman spectroscopy) have been used to characterize three series of C-S-H samples (0.8<Ca/Si<1.7): one C-S-H series, one aluminum inserted C-S-H series (named C-A-S-H series), and one sodium and aluminum inserted C-S-H series (named C-N-A-S-H series). Previous Rietveld analyses have been performed on the two first series and have clearly shown that (1) a unique ‘tobermorite M defect’ structural model allows to describe the C-S-H structure whatever the Ca/Si ratio and (2) the insertion of aluminum into the C-S-H structure led to the degradation of the crystallinity and to a systematic increase of the basal spacing of about 2 Å regardless the Ca/(Si+Al) ratio (at a constant Al/Si ratio of 0.1). Spectroscopic investigations indicate that the main part of the Al atoms is readily incorporated into the interlayer region of the C-S-H structure. Al atoms are mainly inserted as four-fold coordinated aluminates in the dreierketten silicate chain (either in bridging or paired tetrahedra) at low Ca/Si ratio. Four-fold aluminates are progressively replaced by six-fold coordinated aluminates located into the interlayer region of the C-S-H structure and bonded to silicate chains. Investigation of the hydrogen bonding in C-S-H indicates that the main part of the hydrogen bonds is intra-main layer, and thus explains the low stacking cohesion of the C-S-H structure leading to its nanometric crystal size and the OD character of the tobermorite like structures.     

Green extraction process of tannins obtained from Moroccan Acacia mollissima barks by microwave: Modeling and optimization of the process using the response surface methodology RSM

The effect of extraction conditions on polyphenols contents and condensed tannins by microwave-assisted extraction (MAE) was studied for the first time to our knowledge. Moroccan barks of Acacia mollissima was used to extract phenolic compounds. The variables studied are the following: power extraction, time extraction and solvent nature. Five powers extraction were tested: 150 W, 250 W, 300 W, 450 W and 600 W. A significant effect of power extraction on the extractable nature was proved by ANOVA and Student test. The yields were also affected by time extraction. Different solvent (water, ethanol, methanol and ethyl acetate) were tested to evaluate the best extraction solvent according to the extractable nature. Highest polyphenols contents were obtained with methanol. The proportion of this solvent, time extraction and power extraction were optimized using the response surface methodology (RSM). A face-centered composite design (FCCD) was applied to evaluate the effects of these variables on the polyphenols and condensed tannins contents. For each experiment, the extraction yield, the total polyphenolic contents and the condensed tannins contents were quantified using colorimetric essays. The extracts were characterized by their reactivity to formaldehyde and reverse phase high pressure liquid chromatography (RP-HPLC). The highest polyphenols content was obtained at 156 W using 80% of methanol during 5 min. For condensed tannins, the highest content of cyanidin was obtained at 182 W using 20% of methanol during 3.66 min. RSM applied in MAE, permitted to develop green extraction process of polyphenols and tannins extracted, using lower microwave power and methanol proportion with a shortest time extraction and in the same time improve the quantity of extractables obtained from renewable natural resource.     

Quantum‐chemical analyses of aromaticity,UV spectra,and NMR chemical shifts in plumbacyclopentadienylidenes stabilized by Lewis bases

We carried out a series of zeroth‐order regular approximation (ZORA)‐density functional theory (DFT) and ZORA‐time‐dependent (TD)‐DFT calculations for molecular geometries, NMR chemical shifts, nucleus‐independent chemical shifts (NICS), and electronic transition energies of plumbacyclopentadienylidenes stabilized by several Lewis bases, (Ph)₂(^tBuMe₂Si)₂C₄PbL₁L₂ (L₁, L₂ = tetrahydrofuran, Pyridine, N‐heterocyclic carbene), and their model molecules. We mainly discussed the Lewis‐base effect on the aromaticity of these complexes. The NICS was used to examine the aromaticity. The NICS values showed that the aromaticity of these complexes increases when the donation from the Lewis bases to Pb becomes large. This trend seems to be reasonable when the 4n‐Huckel rule is applied to the fractional π‐electron number. The calculated ¹³C‐ and ²⁰⁷Pb‐NMR chemical shifts and the calculated UV transition energies reasonably reproduced the experimental trends. We found a specific relationship between the ¹³C‐NMR chemical shifts and the transition energies. As we expected, the relativistic effect was essential to reproduce a trend not only in the ²⁰⁷Pb‐NMR chemical shifts and J[Pb‐C] but also in the ¹³C‐NMR chemical shifts of carbons adjacent to the lead atom. © 2014 Wiley Periodicals, Inc.     

Identification and characterization of stress degradation products of sumatriptan succinate by using LC/Q‐TOF‐ESI‐MS/MS and NMR: Toxicity evaluation of degradation products

Sumatriptan succinate, a selective 5‐HT1B receptor agonist, was subjected to forced degradation studies as per to International Conference on Harmonization‐specified conditions. The drug exclusively showed its degradation under basic, photolytic, and oxidative stress conditions, whereas it was found to be stable under acidic, thermal, and neutral conditions. Eight (DP‐1 to DP‐8) degradation products were identified and characterized by UPLC‐ESI/MS/MS experiments combined with accurate mass measurements. The effective chromatographic separation was achieved on Hibar Purospher STAR, C18 (250 × 4.6 mm, 5 μm) column using mobile phase consisting of 0.1% formic acid and methanol at a flow rate of 0.6 mL/minute in gradient elution method. It is noteworthy that 2 major degradation products DP‐3 and DP‐7 were isolated using preparative HPLC and characterized by advanced NMR experiments. The degradation pathway of the sumatriptan was established, which was duly justified by mechanistic explanation. In vitro cytotoxicity of isolated DPs was tested on normal human cells such as HEK 293 (embryonic kidney cells) and RWPE‐1 (normal prostate epithelial cells). This study revealed that they were nontoxic up to 100 μm concentration. Further, in silico toxicity of the drug and its degradation products was determined using ProTox‐II prediction tool. This study revealed that DP‐4 and DP‐8 are predicted for immune toxicity. Amine oxidase A and prostaglandin G/H synthase 1 are predicted as toxicity targets for DP‐3, DP‐4, and DP‐6 whereas DP‐1 and DP‐2 are predicted for amine oxidase A target.     

SANIST: optimization of a technology for compound identification based on the European Union directive with applications in forensic,pharmaceutical and food analyses

Electrospray Ionization and collision induced dissociation tandem mass spectrometry are usually employed to obtain compound identification through a mass spectra match. Different algorithms have been developed for this purpose (for example the nist match algorithm). These approaches compare the tandem mass spectra of the unknown analyte with the tandem mass spectra spectra of known compounds inserted in a database. The compounds are usually identified on the basis of spectral match value associated with a probability of recognition. However, this approach is not usually applied to multiple reaction monitoring transition spectra achieved by means of triple quadrupole apparatus, mainly due to the lack of a transition spectra database. The Surface Activated Chemical Ionization‐Electrospray‐NIST Bayesian model database search (SANIST) platform has been recently developed for new potential metabolite biomarker discovery, to confirm their identity and to use them for clinical and diagnostic applications. Here, we present an improved version of the SANIST platform that extends its application to forensic, pharmaceutical, and food analysis studies, where the compound identification rules are strict. The European Union (EU) has set directives for compound identification (EU directive 2002/657/EC). We have applied the SANIST method to identification of 11‐nor‐9‐carboxytetrahydro‐cannabinol in urine samples (an example of a forensic application), circulating levels of the immunosuppressive drug tacrolimus in blood (an example of a pharmaceutical application) and glyphosate in fruit juice (an example of a food analysis application) that meet the EU directive requirements. Copyright © 2016 John Wiley & Sons, Ltd.     

Diagnostic and therapy-control of inborn metabolic disorders by high-performance liquid chromatography: 2,8-dihydroxyadeninuria,xanthinuria

Summary 2,8-Dihydroxyadeninuria and xanthinuria are inborn enzyme disorders which must be under lifelong therapeutic control. Quantitative determination of 2,8-DHA and xanthine using reversed phase HPLC was performed. A new application for the separation of purines shortens analysis-time. Examples of the determination of 2,8-DHA and xanthine before and under certain therapies are shown. Long term monitoring of the patients offers the possibility of a reliable prophylaxis against stone recurrence.     

Exploring the potential of biodiesel derived crude glycerol into high value malic acid: Biosynthesis,process optimization and kinetic assessment

In this study, Zygosaccharomyces rouxii, a sugar tolerant yeast culture was explored for the production of high value malic acid using crude glycerol from biodiesel plant. In addition, the effect of addition of glutamic acid (precursor) (0.25 to 1%), temperature (15 to 30 ​°C) and time (0 to 24 days) of the fermentation process was also investigated by both conventional as well as Response Surface Methodology (RSM). The highest malic acid of 72.1 ​± ​0.05 ​g/L was obtained and RSM predicts the accurate optimized conditions such as 30% crude glycerol concentration in the fermentative media with 0.75% addition of precursor with initial pH 5 ​at 20 ​°C for 20 days. This study reveals that the crude glycerol can be efficiently used and the production of malic acid was raised with 3 folds correspond to no precursor under optimal conditions. The growth and product kinetics were studied by Monod, Logistic, Leudeking Piret as well as Logistic incorporated Leudeking-Piret models with and without precursor and Logistic incorporated Leudeking-Piret model allowed the best fit for the malic acid production.     

Identification and characterization of forced degradation products and stability‐indicating assay for notoginsenosidefc by using UHPLC‐Q‐TOF‐MS and UHPLC‐MS/MS: Insights into stability profile and degradation pathways

Notoginsenoside Fc, a protopanaxadiol‐type saponin, shows multi‐pharmacological activities. Chemical stability evaluation plays a crucial role in drug development. In this study, the forced degradation behavior of Notoginsenoside Fc was investigated under hydrolytic and oxidative conditions. A specific ultra high performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry was developed for the separation, identification, and characterization of the degradation products of Notoginsenoside Fc. Fifty potential degradation products were formed via deglycosylation, dehydration, hydration, isomerization, side‐chain cleaving, oxidation, and superoxidation. Notoginsenoside Fc was subjected to different pH solutions, temperatures, and time periods to assess its stability. A sensitive ultra high performance liquid chromatography‐tandem mass spectrometry was developed for the quantification of Notoginsenoside Fc, notoginsenoside ST‐4, notoginsenoside Ft1, and relative quantification of notoginsenoside Ft2, 20(R)‐notoginsenoside Ft2, notoginsenoside SFt3, and notoginsenoside SFt4. The assay was linear over the concentration range (R² > 0.997) with the lowest limit of quantification of 0.02 μg/mL for Notoginsenoside Fc, Notoginsenoside ST‐4, and Notoginsenoside Ft1. The intra‐day precision, inter‐day precision, and accuracy of the three analytes were within accepted levels. The degradation kinetics of Notoginsenoside Fc in pH 1 and 3 solutions fits to first‐ and second‐order kinetics, respectively. The degradation of Notoginsenoside Fc is pH‐, temperature‐, and time‐dependent.     

Sonophotocatalytic treatment of diazinon using visible light‐driven Ce:Cu‐1,4‐BDOAH2 photocatalyst in a batch‐mode process: Response surface methodology and optimization

Cu–1,4‐benzenedioxyacetic acid (Cu‐1,4‐BDOAH₂) with a narrow band gap (2.52 eV) was synthesized and doped with Ce to afford Ce:Cu‐1,4‐BDOAH₂ as an efficient photocatalyst with narrower band gap (2.39 eV). The prepared Cu‐1,4‐BDOAH₂ and Ce:Cu‐1,4‐BDOAH₂ were characterized using Fourier transform infrared, energy‐dispersive X‐ray, diffuse reflectance spectroscopies, scanning electron microscopy and X‐ray diffraction. The sonophotocatalytic degradation of diazinon was carried out in a batch‐mode reactor using visible light‐driven Ce:Cu‐1,4‐BDOAH₂ photocatalyst as well as ultrasonic irradiation. The narrow band gap of the photocatalyst means that it can be activated under visible light illumination. The effects of operational parameters such as initial diazinon concentration (5–25 mg l^?1), pH (2–10), photocatalyst dosage (10–30 mg) and irradiation time (10–30 min) on the sonophotocatalytic degradation efficiency were investigated using central composite design under response surface methodology. The optimization process was studied using desirability function and the results indicated 99.8% degradation, which was obtained at optimum values of 25 mg l^?1, 6, 20 mg and 20 min for the initial concentration of diazinon, pH, photocatalyst dosage and irradiation time, respectively. Reusability experiments of Ce:Cu‐1,4‐BDOAH₂ photocatalyst showed that it is quite stable with excellent catalytic activity even after five cycles.