Highly Catalytic Carbon Nanotube/Pt Nanohybrid‐Based Transparent Counter Electrode for Efficient Dye‐Sensitized Solar Cells

Low‐cost transparent counter electrodes (CEs) for efficient dye‐sensitized solar cells (DSSCs) are prepared by using nanohybrids of carbon nanotube (CNT)‐supported platinum nanoparticles as highly active catalysts. The nanohybrids, synthesized by an ionic‐liquid‐assisted sonochemical method, are directly deposited on either rigid glass or flexible plastic substrates by a facile electrospray method for operation as CEs. Their electrochemical performances are examined by cyclic voltammetry, current density–voltage characteristics, and electrochemical impedance spectroscopy (EIS) measurements. The CNT/Pt hybrid films exhibit high electrocatalytic activity for I^?/I₃^? with a weak dependence on film thickness. A transparent CNT/Pt hybrid CE film about 100 nm thick with a transparency of about 70 % (at 550 nm) can result in a high power conversion efficiency (η) of over 8.5 %, which is comparable to that of pyrolysis platinum‐based DSSCs, but lower cost. Furthermore, DSSC based on flexible CNT/Pt hybrid CE using indium‐doped tin oxide‐coated polyethylene terephthalate as the substrate also exhibits η=8.43 % with J_sc=16.85 mA cm^?2, V_oc=780 mV, and FF=0.64, and this shows great potential in developing highly efficient flexible DSSCs.     

Efficient Counter Electrode Manufactured from Ag2S Nanocrystal Ink for Dye‐Sensitized Solar Cells

It is generally believed that silver or silver‐based compounds are not suitable counter electrode (CE) materials for dye‐sensitized solar cells (DSSCs) due to the corrosion of the I^?/I₃^? redox couple in electrolytes. However, Ag₂S has potential applications in DSSCs for catalyzing I₃^? reduction reactions because of its high carrier concentration and tiny solubility product constant. In the present work, CE manufactured from Ag₂S nanocrystals ink exhibited efficient electrocatalytic activity in the reduction of I₃^? to I^? in DSSCs. The DSSC consisting of Ag₂S CE displayed a higher power conversion efficiency of 8.40 % than that of Pt CE (8.11 %). Moreover, the devices also showed the characteristics of fast activity onset, high multiple start/stop capability and good irradiated stability. The simple composition, easy preparation, stable chemical property, and good catalytic performance make the developed Ag₂S CE as a promising alternative to Pt CE in DSSCs.     

Low‐cost Nickel Complex Dye‐sensitized Titania Nanoparticle/nanotube Composites for Solar Cells

In this work, high‐performance dye‐sensitized solar cells (DSSCs) based on new low‐cost visible nickel complex dye (VisDye), TiO₂ nanoparticle/nanotube composites electrodes, carbon nanoparticles counter electrodes, and ionic liquids electrolytes have been fabricated. The electronic structure, optical spectroscopy, and electrochemical properties of the VisDye were studied. Experimental results indicate that it is beneficial to improve the electron transport and power conversion efficiency using the nickel complex VisDye and TiO₂ nanoparticle/nanotube composites. Under optimized conditions, the solar energy conversion efficiencies were measured. The short‐circuit current density (J_SC), the open‐circuit voltage (V_OC), the fill factor (FF), and the overall efficiency (η) of the DSSCs are 10.01 mA/cm², 516 mV, 0.68, and 3.52%, respectively. This study demonstrates that the combination of new VisDye with TiO₂ nanoparticle/nanotube composites electrodes and carbon nanoparticles counter electrodes provide a way to fabricate highly efficient dye‐sensitized solar cells in low‐cost production.     

Synthesis and photovoltaic properties of organic sensitizers containing electron-deficient and electron-rich fused thiophene for dye-sensitized solar cells

Diverse fused thiophenes with electron-rich and electron-deficient blocks have been synthesized and employed as the π-conjugated spacers of organic dyes for the dye-sensitized solar cells (DSSCs). The effects of these fused thiophenes were investigated by their absorption spectra, electrochemical and photovoltaic properties. For a typical device a maximum power conversion efficiency of 6.11% was obtained under simulated AM 1.5 irradiation (100 mW cm^?2): a short-circuit current (J_SC) of 14.47 mA cm^?2, an open-circuit voltage (V_OC) of 670 mV, and a fill factor (FF) of 0.63.     

Voltage- and Power-Conversion Performance of Bi-functional ZrO2 : Er3+/ Yb3+ Assisted and Co-sensitized Dye Sensitized Solar Cells for Internet of Things Applications

Giant power conversion efficiency is achieved by using bifunction ZrO₂ : Er³⁺/Yb³⁺assisted co-sensitised dye-sensitized solar cells. The evolution of the crystalline structure and its microstructure are examined by X-ray diffraction, scanning electron microscopy studies. The bi-functional behaviour of ZrO₂ : Er³⁺/Yb³⁺ as upconversion, light scattering is confirmed by emission and diffused reflectance studies. The bi-function ZrO₂ : Er³⁺/Yb³⁺ (pH=3) assisted photoanode is co-sensitized by use of N719 dye, squaraine SPSQ2 dye and is sandwiched with Platinum based counter electrode. The fabricated DSSC exhibited a giant power conversion efficiency of 12.35 % with V_OC of 0.71 V, J_SC of 27.06 mA/cm², FF of 0.63. The results, which motivated the development of a small DSSC module, gave 6.21 % and is used to drive a tiny electronic motor in indoor and outdoor lighting conditions. Small-area DSSCs connected in series have found that a V_OC of 4.52 V is sufficient to power up Internet of Things (IoT) devices.     

Optically Transparent Gold Nanoparticles for DSSC Counter-Electrode: An Electrochemical Characterization

A gold nanoparticles transparent electrode was realized by chemical reduction. This work aims to compare the transparent gold nanoparticles electrode with a more commonly utilized gold-film-coated electrode in order to investigate its potential use as counter-electrode (CE) in dye-sensitized solar cells (DSSCs). A series of DSSC devices, utilizing I⁻/I³⁻ and Co(III)/(II) polypyridine redox mediators [Co(dtb)3]³⁺/²⁺; dtb = 4,4′ditert-butyl-2,2′-bipyridine)], were evaluated. The investigation focused firstly on the structural characterization of the deposited gold layers and then on the electrochemical study. The novelty of the work is the realization of a gold nanoparticles CE that reached 80% of average visible transmittance. We finally examined the performance of the transparent gold nanoparticles CE in DSSC devices. A maximum power conversion efficiency (PCE) of 4.56% was obtained with a commercial I⁻/I³⁻-based electrolyte, while a maximum 3.1% of PCE was obtained with the homemade Co-based electrolyte.     

Poly(o-phenylenediamine)/MWNTs composite film as a hole conductor in solid-state dye-sensitized solar cells

All solid-state dye-sensitized solar cells were fabricated using in situ electrochemically polymerized poly(o-phenylenediamine)/MWNTs (PoPD/MWNTs) as a hole transport materiel. The electrochemical behaviors of PoPD/MWNTs indicated that the electron exchange efficiency improves obviously of PoPD after the addition of carbon nanotubes. The PoPD/MWNTs composite film was deposited on the dye anchored porous TiO₂ electrode and I–V characterization was performed under simulated AM 1.5 illumination. Fabricated devices for the PoPD/MWNT composites prepared in 0.1 g/L MWNTs showed a photoresponse with an open-circuit voltage V_OC of 479 mV and a short-circuit current density (I_SC) of 0.572 mA/cm² with the overall conversion efficiency of 0.13%, higher than those of the cell with only PoPD (i.e., I_SC = 0.275 mA/cm², V_OC = 462 mV, FF = 0.35, η = 0.04%). It is obvious that the introduction of MWNTs to PoPD composites could improve the cell performance.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

Synthesis and applications of novel acceptor-donor-acceptor organic dyes with dithienopyrrole- and fluorene-cores for dye-sensitized solar cells

Four novel symmetrical organic dyes (S1-S4) configured with acceptor-donor-acceptor (A-D-A) structures containing electron donating fluorene (S1 and S2) and N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole (DTP) (S3 and S4) cores terminated with two anchoring cyanoacrylic acids (as electron acceptors) were synthesized and applied to dye-sensitized solar cells (DSSCs). The DSSC device based on S2 dye showed the best photovoltaic performance among S1-S4 dyes: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 76%, a short circuit current (J_SC) of 12.27 mA/cm², an open circuit voltage (V_OC) of 0.61 V, a fill factor (FF) of 0.63, and an overall power conversion efficiency (η) of 4.73%. Besides, the utilization of chenodoxycholic acid (CDCA) as a co-adsorbent in the DSSC device based on S3 dye showed a significant improvement in its η value (from 3.70% to 4.31%), which is attributed to the suppression of dye aggregation on TiO₂ surface and thus to increase the J_SC value eventually.     

Ternary-organic photovoltaics with J71 as donor and two compatible nonfullerene acceptors

Recombining the advantages on photovoltaic parameters of two binary-organic photovoltaics (OPVs) into one ternary cell is an efficient strategy for selecting materials, in addition to the absorption spectra complementary among the used materials. The binary-OPVs with J71:BTP-4F-12 exhibit a power conversion efficiency (PCE) of 11.70%, along with a short-circuit-current-density (J_SC) of 23.61 mA cm⁻², an open-circuit-voltage (V_OC) of 0.841 V and a fill factor (FF) of 58.99%. Although the relatively low PCE of 10.92% and J_SC of 16.59 mA cm⁻² are achieved in J71:ITIC-based binary-OPVs, the V_OC of 0.935 V and FF of 70.40% are impressive compared with J71:BTP-4F-12-based OPVs. Optimal ternary-OPVs are achieved with J71:BTP-4F-12:ITIC as active layers by weight ratio of 1:0.48:0.72, delivering a markedly increased PCE of 13.05% with a V_OC of 0.903 V, a J_SC of 21.27 mA cm⁻² and a FF of 68.20%. An over 11.5% PCE improvement is obtained by recombining the advantages of binary-OPVs into ternary-OPVs with ITIC as photon harvesting reinforcing agent and morphology regulator. The good compatibility between BTP-4F-12 and ITIC provides large room to well optimize their relative content for achieving the well balanced three key photovoltaic parameters of ternary-OPVs.     

Podlike N‐Doped Carbon Nanotubes Encapsulating FeNi Alloy Nanoparticles: High‐Performance Counter Electrode Materials for Dye‐Sensitized Solar Cells

Podlike nitrogen‐doped carbon nanotubes encapsulating FeNi alloy nanoparticles (Pod(N)‐FeNi) were prepared by the direct pyrolysis of organometallic precursors. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Tafel polarization measurements revealed their excellent electrocatalytic activities in the I^?/I₃^? redox reaction of dye‐sensitized solar cells (DSSCs). This is suggested to arise from the modification of the surface electronic properties of the carbon by the encapsulated metal alloy nanoparticles (NPs). Sequential scanning with EIS and CV further showed the high electrochemical stability of the Pod(N)‐FeNi composite. DSSCs with Pod(N)‐FeNi as the counter electrode (CE) presented a power conversion efficiency of 8.82 %, which is superior to that of the control device with sputtered Pt as the CE. The Pod(N)‐FeNi composite thus shows promise as an environmentally friendly, low‐cost, and highly efficient CE material for DSSCs.     

Coplanar indenofluorene-based organic dyes for dye-sensitized solar cells

A series of new organic dyes, comprising indenofluorene moiety as a conjugated bridge, with an extended π-groups, such as thiophene and furan, diphenylamine as donor, cyanoacrylic acid group as an electron acceptor and anchoring group, have been synthesized. Photophysical and electrochemical measurements, and theoretical computation were carried out on these dyes. Dye-sensitized solar cells (DSSCs) using these dyes as the sensitizers exhibited photocurrent density (J_SC), open-circuit voltage (V_OC), and fill factor (FF) in the range of 6.95–8.20 mA/cm², 0.70–0.71 V, and 0.69–0.71, respectively, corresponding to an overall conversion efficiency of 3.36–4.05%. The best efficiency reached 56% of the standard cell based on N719.     

Carbon nanotube-carbon black hybrid counter electrodes for dye-sensitized solar cells and the effect on charge transfer kinetics

In this work, the catalytic activity of carbon nanotubes (CNTs), carbon black (CB), and CNT-CB counter electrodes in the I⁻/I₃⁻ reduction reaction is reported and compared with the Pt counter electrode. The fabricated counter electrodes were evaluated in dye-sensitized solar cells (DSSCs). The results indicate that the best cathodes were made from CNT₁₀ (240 μm) and CB with a charge transfer resistance (R_CT) of 2.70 Ω, and when the complete device shows 19.83 Ω of internal series resistance (R_S), the photovoltaic parameters of these cells were J_SC = 10.47 mA cm⁻²; V_OC = 0.70 V; and FF = 57.90, with an efficiency of 4.29%, indicating a better interaction between the CNT₁₀ in the 3D network of the counter electrode, generating a good charge transfer kinetics, in comparison with only CNT₁₀ or CB.

     

Enhancement of photocurrent of polymer‐gelled dye‐sensitized solar cell by incorporation of exfoliated montmorillonite nanoplatelets

Poly(n‐isopropylacrylamide) (PNIPAAm) and its nanocomposite with exfoliated montmorillonite (MMT) were prepared by soap‐free emulsion polymerization and individually applied to gel the electrolyte systems for the dye‐sensitized solar cells (DSSCs). Each exfoliated MMT nanoplatelet had a thickness of ～ 1 nm, carried ～ 1.8 cation/nm², and acted like a two‐dimensional electrolyte. The DSSC with the LiI/I₂/tertiary butylpyridine electrolyte system gelled by this polymer nanocomposite had higher short‐circuit current density (J_sc) compared to that gelled by the neat PNIPAAm. The former has a J_sc of 12.6 mA/cm², an open circuit voltage (V_oc) of 0.73 V, and a fill factor (FF) of 0.59, which harvested 5.4% electricity conversion efficiency (η) under AM 1.5 irradiation at 100 mW/cm², whereas the latter has J_sc = 7.28 mA/cm², V_oc = 0.72 V, FF = 0.60, and η = 3.17%. IPCE of the nanocomposite‐gelled DSSC were also improved. Electrochemical impedance spectroscopy of the DSSCs revealed that the nanocomposite‐gelled electrolytes significantly decreased the impedances in three major electric current paths of DSSCs, that is, the resistance of electrolytes and electric contacts, impedance across the electrolytes/dye‐coated TiO₂ interface, and Nernstian diffusion within the electrolytes. The results were also consistent with the increased molar conductivity of nanocomposite‐gelled electrolytes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 47–53, 2008     

简易合成Cu2SnSe3作染料敏化太阳能电池对电极

采用简易溶剂热法合成直径为150-250 nm的Cu2SnSe3纳米颗粒.以Cu2SnSe3"墨水"为前驱体采用滴落涂布法在掺氟二氧化锡基板上沉积Cu2SnSe3薄膜作为染料敏化太阳能电池(DSSC)对电极.利用场发射扫描电镜(FESEM)、透射电镜(TEM)、X射线衍射(XRD)、拉曼光谱(Raman)、能谱仪(EDS)等对Cu2SnSe3纳米颗粒的形貌、结构和组成进行表征.结果表明:产物纯净无杂项且符合化学计量比.以Cu2SnSe3为对电极的DSSC转化效率为7.75%,与铂对电极DSSC效率相当(7.21%).研究表明,DSSC的光电流密度和影响因子与Cu2SnSe3薄膜厚度密切相关,这是由于不同厚度的Cu2SnSe3薄膜作对电极所对应的催化位置数目和电阻值不同.电化学阻抗谱研究说明,Cu2SnSe3因具有类似铂良好的电催化性能而适合用作染料敏化太阳能电池对电极材料.本文以Cu2SnSe3代替贵金属铂,提供了一种廉价制备高效染料敏化太阳能电池对电极的新方法.     

Well‐Dispersed CoS Nanoparticles on a Functionalized Graphene Nanosheet Surface: A Counter Electrode of Dye‐Sensitized Solar Cells

With a facile electrophoretic deposition and chemical bath process, CoS nanoparticles have been uniformly dispersed on the surface of the functionalized graphene nanosheets (FGNS). The composite was employed as a counter electrode of dye‐sensitized solar cells (DSSCs), which yielded a power conversion efficiency of 5.54 %. It is found that this efficiency is higher than those of DSSCs based on the non‐uniform CoS nanoparticles on FGNS (4.45 %) and built on the naked CoS nanoparticles (4.79 %). The achieved efficiency of our cost‐effective DSSC is also comparable to that of noble metal Pt‐based DSSC (5.90 %). Our studies have revealed that both the exceptional electrical conductivity of the FGNS and the excellent catalytic activity of the CoS nanoparticles improve the conversion efficiency of the uniformly FGNS‐CoS composite counter electrode. The electrochemical impedance spectra, cyclic voltammetry, and Tafel polarization have evidenced the best catalytic activity and the fastest electron transport. Additionally, the dispersion condition of CoS nanoparticles on FGNS plays an important role for catalytic reduction of I₃^?.     

Effect of long alkyl chains of aniline donor on the photovoltaic performance of D‐π‐A zinc porphyrin for dye‐sensitized solar cells

Three novel dyes of JJ1 , JJ2 , and JJ6 featured zinc porphyrin as a basic core structure; N, N‐alkyl‐4‐(prop‐1‐yn‐1‐yl)aniline as an electron donor linked to meso‐10‐position; 4‐(prop‐1‐yn‐1‐yl)benzoic acid as an electron acceptor linked to meso‐20‐position; and 2,6‐bis(dodecyloxy)phenyl or 2,6‐bis(octyloxy)phenyl respectively linked to meso‐5 and meso‐15‐positions of zinc porphyrin have been synthesized and used for dye‐sensitized solar cells. Porphyrin JJ6 featured the shortest alkyl group (─C₄H₉) on the donor, whereas JJ2 contained the longest alkyl groups (─C₁₂H₂₅), and JJ1 has a medium length of octyl groups. With these new porphyrin sensitizers, we observed that JJ6 has 7.55% power conversion efficiency under simulated one‐sun illumination (AM 1.5 G, 100 mW/cm²) with J_SC = 18.64 mA/cm², V_OC = 0.66 V, and fill factor (FF) = 0.61, which was higher than the other two; JJ1 (7.35%) with J_SC = 18.83 mA/cm², V_OC = 0.68 V, and FF = 0.60; and JJ2 (6.33%) with J_SC = 15.69 mA/cm², V_OC = 0.62 V, and FF = 0.65. The power conversion efficiency of JJ6 and JJ1 were higher than JJ2 , demonstrating that the lengthy alkyl groups on the aniline cause a decrease in efficiency of the devices.     

Novel D-π-A system based on zinc-porphyrin derivatives for highly efficient dye-sensitised solar cells

We have designed and synthesised novel zinc porphyrin dyes that have a D-π-A system based on porphyrin derivatives containing a carbazole linked triphenylamine (TPA) electron-donating group as the second electron donor and a meso-substituted phenyl carboxyl anchoring group attached at the meso position of the porphyrin ring, yielding push-pull porphyrins as the most efficient green dye for DSSC applications. Under photovoltaic performance measurements, a maximum photon-to-electron conversion efficiency of 5.01% was achieved with the DSSC based on the dye HKK-Por1 (J_SC = 10.7 mA/cm², V_OC = 0.67 V, FF = 0.70) under AM1.5 irradiation (100 mW/cm²).     

Thiophene–nitroxide radical as a novel combination of sensitizer–redox mediator for dye-sensitized solar cells

We report a novel combination of organic sensitizer and redox mediator in the electrolyte for dye-sensitized solar cells (DSSCs): a thiophene dye and nitroxide radicals. Nitroxide radicals and their oxidized counterparts of oxoammonium cations show robust reversible redox reactions, thus supporting robust DSSC operations. Moreover, their redox potentials (E _1/2) and thus open-circuit voltages (V _OC) can be tuned further by attached functional groups. Optical and electrochemical characterization reveal that these new combinations exhibit enhanced V _OC and power conversion efficiencies compared to the existing iodine mediator (I⁻/I₃⁻) due to the increased V _OC. Also, the selection of the sensitizer–redox mediator turns out to be critical in the overall cell performance. Indeed, the typical ruthenium dye loses its light absorption capability when it is operated in conjunction with the nitroxide radicals.     

Phenanthrene-Fused-Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper-Electrolyte-Based Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) based on Cu^II/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open-circuit voltages (V_OC, more than 1 V). However, their short-circuit photocurrent density (J_SC) has remained modest. Increasing the J_SC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO₂ film and fast regeneration by the Cu^I complex. Herein, we report two new D-A-π-A-featured sensitizers termed HY63 and HY64 , which employ benzothiadiazole (BT) or phenanthrene-fused-quinoxaline (PFQ), respectively, as the auxiliary electron-withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64 -based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near-quantitative collection of photogenerated charge carriers.