One-pot synthesis of graphene–cuprous oxide composite with enhanced photocatalytic activity

In this paper, graphene–cuprous oxide (G–Cu₂O) composites were synthesized at room temperature using graphene oxide (GO) as two-dimensional support. From Zeta potential analysis, the surface charge of G–Cu₂O composites altered from positive to negative, which favors the adsorption and photodegradation of positively charged dyes. Compared with Cu₂O under similar synthesis condition, the G–Cu₂O composites demonstrated improved photodegradation activity for methylene blue (MB) dye under visible light. Controlled experiments indicated that the G–Cu₂O composite synthesized with 80 mg GO in the reaction system possessed more negative Zeta potential, highest specific surface area and thus presented the highest photocatalytic activity. Electrons mechanism for the improved photocatalytic performance of G–Cu₂O composite was proposed in the degradation of MB.     

Expanding the synthesis of Stöber spheres: towards the synthesis of nano-magnesium oxide and nano-zinc oxide

In order to synthesise Stöber spheres of different diameters, fixed amounts of ethanol, ammonia and water were used with varying amounts of tetraethyl orthosilicate. This simple method was further applied to the synthesis of nano-ZnO and nano-MgO from their respective precursors, zinc methoxide and magnesium ethoxide. The spherical nano-SiO₂, nano-ZnO and nano-MgO synthesised in this way were characterised by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. Preliminary investigations found that nano-ZnO and nano-MgO showed good catalytic activity in the trans-esterification reaction that converts vegetable oil to biodiesel.     

An improved synthesis of ‘octa-acid’ deep-cavity cavitand

An improved synthesis of a water-soluble deep-cavity cavitand (octa-acid, 1) is presented. Previously (Gibb, C.L.D.; Gibb, B.C. J. Am. Chem. Soc. 2004, 126, 11408–11409), we documented access to host 1 in eight (non-linear) steps starting from resorcinol; a synthesis that required four steps involving chromatographic purification. Here, we reveal a modified synthesis of host 1. Consisting of seven (non-linear) steps, this new synthesis involves only one chromatographic step, and avoids a minor impurity observed in the original approach. This improved synthesis is therefore useful for the laboratories that are investigating the properties of these types of host.     

Controlled synthesis of graphene oxide/alumina nanocomposites using a new dry sol–gel method of synthesis

The present paper gives new insight into the problem of controlling the morphology of reduced graphene oxide/alumina (RGO/Al₂O₃) nanocomposites. The dry and simplified sol–gel methods of RGO/Al₂O₃ nanocomposite synthesis were compared and the influence of six key synthesis parameters on the morphology of the resulting nanocomposite powders was investigated to optimize the morphology of RGO/Al₂O₃ nanocomposites in terms of reducing the undesired agglomeration of RGO/Al₂O₃ nanocomposite flakes to a significant minority and obtaining the uniform coverage of RGO surface with Al₂O₃ nanoparticles. Our investigations indicate that, despite the high excess of Al₂O₃ used (95 wt%), the lowest RGO/Al₂O₃ flake agglomeration and the formation of a uniform layer composed of Al₂O₃ nanoparticles with the average size of 58 nm occurred only when 5 wt% of graphene oxide was used as a substrate for the deposition of Al₂O₃ nanoparticles together with triethyl aluminium as an Al₂O₃ precursor and dry hexane as the reaction environment. The resulting organic precursor was thermally decomposed at 280 °C for 3 h in air atmosphere (R4 reaction pathway). This was confirmed by the high BET-specific surface area (242.4 m²/g) and the high open porosity (0.7 cm³/g) of the obtained RGO(5 wt%)/Al₂O₃ nanocomposite. This is also the first study with a detailed discussion of the reactions expected to occur during the synthesis of an RGO/Al₂O₃ nanocomposite.     

Facile synthesis of mesoporous magnesium oxide–graphene oxide composite for efficient and highly selective adsorption of hazardous anionic dyes

Mesoporous magnesium oxide–graphene oxide composite (MGC) has been synthesized using a facile post-immobilization method by mixing pre-synthesized magnesium oxide (MgO) with graphene oxide (GO). MgO used for fabrication of the composite has been synthesized using an environment-friendly method involving gelatin as a template. XRD, Raman and EDX analyses have confirmed the presence of MgO and GO in the composite. FTIR and SEM analyses of synthesized MGC have further elucidated the surface functionalities and morphology, respectively. Using N₂ adsorption–desorption isotherm, BET surface area of MGC has been calculated to be 55.9 m² g^?1 and BJH analysis confirmed the mesoporous nature of MGC. The application of synthesized MGC as a selective adsorbent for various toxic anionic dyes has been explored. Batch adsorption studies have been carried out to investigate the influence of different adsorption parameters on the adsorption of two anionic dyes: indigo carmine (IC) and orange G (OG). The maximum adsorption capacities exhibited by MGC for IC and OG are 252.4 and 24.5 mg g^?1, respectively. Plausible mechanism of dye adsorption has been explained in detail using FTIR analysis. In a mixture of cationic and anionic dyes, MGC selectively adsorbs anionic dyes with high separation factors, while in binary mixtures of anionic dyes, both dyes are adsorbed efficiently. Thus, MGC has been shown to be a potential adsorbent for the selective removal of anionic dyes from wastewater.

     

An improved procedure for the synthesis of 4-methylimidazol-2-one

A novel one-pot synthetic method of 4-methylimidazol-2-one is described. The target compound is conveniently synthesized from sodium diformylamide, a modified Gabriel reagent prepared, through condensation, hydrolyzation and cyclization reactions without separating intermediates, its total yield is 75.8%.     

Comparison of performances of bioanodes modified with graphene oxide and graphene–platinum hybrid nanoparticles

The performances of graphene oxide (GO) and graphene–platinum hybrid nanoparticles (Gr-Pt hybrid NPs) were compared for biofuel cell (BFC) systems. This is the first study that constitutes these nanomaterials in BFC systems. For this purpose, fabricated bioanodes were combined with laccase modified biocathode in a single cell membraneless BFC. Power and current densities of these systems were calculated as 2.40 μW cm^− 2 and 211.90 μA cm^− 2 for GO based BFC and 4.88 μW cm^− 2 and 246.82 μA cm^− 2, for Gr-Pt hybrid NPs based BFC. As a result, a pioneer study which demonstrates the effective performances of combination of graphene with Pt was conducted.     

Activity of palladium nanoparticles on graphene oxide in the Suzuki—Miyaura reaction

A convenient express method for obtaining palladium nanoparticles on the graphene oxide support was developed. The data of transmission electron microscopy and X-ray diffraction analysis indicated the formation of palladium nanoparticles with an average size of 2 nm. The obtained nanocomposite material showed high catalytic activity in the cross-coupling reaction of bromobenzene with phenylboronic acid. The efficiency of the catalyst increases when using a mixture of organic solvents with water.     

Thermal properties of pressure sintered alumina–graphene composites

Journal of Thermal Analysis and Calorimetry - The work concerns the alumina–graphene materials sintered by two different pressure methods. The different particle sizes of graphene were used....     

A practical and improved process for the synthesis of Hagen’s gland lactones by catalytic hydro-deiodination

Catalytic hydro-deiodination has been efficiently employed in the development of a benign process for the synthesis of Hagen’s gland lactones. The process was developed with only two column chromatographic purifications and is applicable for gram scale synthesis. No protecting groups were used in the synthesis which is an added advantage.     

An improved procedure for the preparation of β-thiohydroximates for glucosinolate synthesis

A novel and simple method is described for the synthesis of β-thiohydroximates from oximes and 2,3,4,6-tetra-O-acetyl-1-thio-β-d-glucopyranose, which are key intermediates in the synthesis of glucosinolates. The procedure involves the in situ formation of an oximyl chloride from the oxime, using inexpensive bleach, which is then reacted directly under basic conditions with the thioglucopyranose.     

Electrochemical synthesis of copper nanoparticles on nafion–graphene nanoribbons and its application for the synthesis of diaryl ethers

Electrochemical synthesis of copper nanoparticles on nafion–graphene nanoribbons support for the synthesis of diaryl ethers via Ullmann type coupling is reported. The catalyst showed excellent performance for C–O cross coupling reactions under ligand free condition. The catalyst was characterized by various techniques such as SEM, TEM, XRD, EDX, BET, TGA, and UV spectrophotometry. It was recycled several times without significant loss in its catalytic activity.     

Sonochemical synthesis of graphene oxide supported Pt–Pd alloy nanocrystals as efficient electrocatalysts for methanol oxidation

Pt–Pd bimetallic nanoparticles supported on graphene oxide (GO) nanosheets were prepared by a sonochemical reduction method in the presence of polyethylene glycol as a stabilizing agent. The synthetic method allowed for a fine tuning of the particle composition without significant changes in their size and degree of aggregation. Detailed characterization of GO-supported Pt–Pd catalysts was carried out by transmission electron microscopy (TEM), AFM, XPS, and electrochemical techniques. Uniform deposition of Pt–Pd nanoparticles with an average diameter of 3 nm was achieved on graphene nanosheets using a novel dual-frequency sonication approach. GO-supported bimetallic catalyst showed significant electrocatalytic activity for methanol oxidation. The influence of different molar compositions of Pt and Pd (1:1, 2:1, and 3:1) on the methanol oxidation efficiency was also evaluated. Among the different Pt/Pd ratios, the 1:1 ratio material showed the lowest onset potential and generated the highest peak current density. The effect of catalyst loading on carbon paper (working electrode) was also studied. Increasing the catalyst loading beyond a certain amount lowered the catalytic activity due to the aggregation of metal particle-loaded GO nanosheets.     

Quiescent hydrothermal synthesis of reduced graphene oxide–periodic mesoporous silica sandwich nanocomposites with perpendicular mesochannel alignments

Quiescent hydrothermal conditions were applied to synthesis of the sandwich nanocomposites of reduced graphite oxide (rGO) and periodic mesoporous silica (PMS) with vertically aligned mesochannels. It was found that the formation of the PMS–rGO–PMS sandwich structure is very sensitive to the surface and synthesis conditions. Although a higher temperature hydrothermal condition promotes reduction of GO and formation of bulky mesoporous nanoparticles, quiescent hydrothermal condition can serve as an alternative approach to obtain the unusual nanocomposites and slightly promote the structural stability of PMS on the surface of rGO.     

Thermal analysis scheme aimed at better understanding of the Earth’s climate changes due to the alternating irradiation

Methodological scheme of thermal analysis is used for portraying the Earth environmental research and climate changes showing particularly the history, effect of atmosphere reflection (albedo) and absorption (so called greenhouse effect included). The net behavior of the Earth as a black body is reviewed. The most influential on climate changes is alteration of the geometry of the Earth trajectory and the irradiative power of the Sun (as a standard thermo-analytical pair of the sample and radiator). Thermodynamic basis of water vapor impacts is pointed out, the absorption spectra of atmosphere emphasized and temperature gradients indicated. The historical course of the Earth temperature and CO₂ concentration is put in analogy with the method of gas desorption analysis, which supports the view that the variation of CO₂ concentration recorded in the past may not be alone blamed for temperature changes.     

One-step synthesis of a Methylene Blue@ZIF-8-reduced graphene oxide nanocomposite and its application to electrochemical sensing of rutin

The authors demonstrate the exploitation of reduced graphene oxide (RGO) as a template for immobilizing zeolitic imidazolate framework-8 (ZIF-8) crystals loaded with the electrochemical probe Methylene Blue (MB). The framework was deposited on the surface of RGO in a one-pot process. Transmission electron microscopy, scanning electron microscopy and X-ray diffraction were employed to characterize the nanocomposite. The electrochemical behavior of rutin at a glassy carbon electrode (GCE) modified with the nanocomposite was investigated by cyclic voltammetry and differential pulse voltammetry. The modified GCE displays high electrocatalytic activity toward rutin oxidation at a relatively low working potential (0.4 V vs. Ag/AgCl). Under the optimal conditions, the sensor has an amperometric response that is linear in the 0.1 to 100 μM rutin concentration range, with a 20 nM detection limit (at an S/N ratio of 3). The method was successfully applied to the determination of rutin in tablets and urine samples.

Open image in new window

Graphical abstract The zeolitic imidazolate framework ZIF-8 was loaded with Methylene Blue and deposited on the surface of reduced graphene oxide. A glassy carbon electrode was modified with the nanocomposite and then used for the determination of rutin with a 20 nM detection limit and a linear range from 0.1 to 100 μM.

     

Brodie's or Hummers’ Method: Oxidation Conditions Determine the Structure of Graphene Oxide

Synthesis and studies of graphite oxide started more than 150 years ago and turned into a boom by the measurements of the outstanding physical properties of graphene. A series of preparation protocols emanated trying to optimize the synthesis of graphene oxide in order to obtain a less defective material, as source for graphene. However, over-oxidation of the carbon framework hampered establishing structure-property relationships. Here, the fact that two different synthetic methods for graphene oxide preparation lead to very similar types of graphene oxide with a preserved graphene lattice is demonstrated. Either sodium chlorate in nitric acid (similar to Brodie's method) or potassium permanganate in sulfuric acid (similar to Hummers’ method) treatment are possible; however, reaction conditions must be controlled. With a preserved carbon lattice analytical differences between the samples relate to the altered on-plane functionality. Consequently, terming preparation protocols “according to Brodie's/Hummers’ method” is not sufficient.     

UV-assisted synthesis of reduced graphene oxide–ZnO nanorod composites immobilized on Zn foil with enhanced photocatalytic performance

Research on Chemical Intermediates - ZnO nanorods were hydrothermally grown on Zn foil in an alkaline solution and the immobilized nanorods were subsequently hybridized with reduced graphene oxide...     

An improved synthesis of the C42–C52 segment of ciguatoxin 3C

In our previously reported method for the construction of the IJKLM-ring of ciguatoxin 3C (CTX3C), the lengthy synthetic process for the intermediate C42–C52 (L-ring) segment was problematic. Therefore, a new and improved procedure for the C42–C52 segment, having modified protecting groups, was developed. The new route includes a chirality transferring Ireland-Claisen rearrangement for the construction of the vicinal dimethyl branching at C47–48, a one-pot cyclization process for the establishment of the stereocenters at C45 and C46 as well as the γ-hydroxy δ-lactone framework corresponding to the L-ring, and Brown’s asymmetric crotylboration for the installation of the stereocenters at C43 and C44. The new C42–C52 segment was successfully coupled with the previously reported C32–C41 (I-ring) segment to produce the IJKLM-ring.