Novel organic magnet derived from pyrazine-fused furazans

The first organic magnet based on a high-nitrogen framework of pyrazine-fused furazans Na(L⁻)(H₂O)₃ was found. A quantum-chemical study of M(L⁻)(H₂O)_n, where M = Li, Na, K, Rb, NH₄, revealed that exchange coupling energy between the neighboring radical anions proved highly sensitive to the motion of one L⁻ relative to another.     

Graphdiyne as a novel nonactive anode for wastewater treatment: A theoretical study

Electrochemical oxidation of water to produce highly reactive hydroxyl radicals (OH) is the dominant factor that accounts for the organic compounds removal efficiency in water treatment. As an emerging carbon-based material, the investigation of electrocatalytic of water to produce OH on Graphdiyne (GDY) anode is firstly evaluated by using first-principles calculations. The theoretical calculation results demonstrated that the GDY anode owns a large oxygen evolution reaction (OER) overpotential (η^OER = 1.95 V) and a weak sorptive ability towards oxygen evolution intermediates (HO*, not OH). The high Gibbs energy change of HO* (3.18 eV) on GDY anode makes the selective production of OH (ΔG = 2.4 eV) thermodynamically favorable. The investigation comprises the understanding of the relationship between OER to electrochemical advanced oxidation process (EAOP), and give a proof-of-concept of finding the novel and robust environmental EAOP anode at quantum chemistry level.     

Covalent organic frameworks functionalized carbon fiber paper for the capture and detection of hydroxyl radical in the atmosphere

Developing a fast, sensitive and convenient method for the detection of hydroxyl radicals (OH) in the atmosphere could help us know the precursor levels of atmospheric species and control air pollution. In this work, the carbon fiber paper (CFP) functionalizing with a kind of covalent organic frameworks (COFs), formed from 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) (COF(TpBD)), was firstly used a new platform for OH trapping and detection. The COF(TpBD) modified CFP was acted as a filter to impregnate salicylic acid (SA) and a detector to detect 2,5-dihydroxybenzoic acid (2,5-DHBA) which was produced from the reaction between the impregnated SA and OH in the atmosphere. This method provided a linearity for 2,5-DHBA from 5.0 × 10⁻¹⁴ mol/L 1.0 × 10⁻⁹ mol/L with a detection limit of 6.9 × 10⁻¹⁵ mol/L, which is corresponding to the amount of OH from 3.0 × 10⁷ to 6.0 × 10¹¹ molecules/cm³ with the detection limit of 4.1 × 10⁶ molecules/cm³. This COF(TpBD)-CFP platform has been successfully applied for the detection of OH concentration under different conditions of Yangzhou when the sampling time was shortened to 30 min. This work has provided a new method for atmospheric OH detection with excellent sensitivity, simplicity, and high speed.     

Enhanced visible light photocatalytic activity of CeO2@Zn0.5Cd0.5S by facile Ce(IV)/Ce(III) cycle

In this study, CeO₂@Zn_0.5Cd_0.5S heterostructure (Ce@ZCS) is synthesized via a simple two-step hydrothermal method. The effect of CeO₂ loading on the visible-light photoactivity of Zn_0.5Cd_0.5S is mainly investigated. It is found that Ce@ZCS shows a 1.9 times activity as high as ZCS for the MB degradation. The improved activity mainly results from the significant enhanced charge separation by CeO₂, in which the electron transfer is obviously promoted by the facile Ce(IV)/Ce(III) cycle. The excited electrons of ZCS is easy to transfer to CeO₂, thus obviously increasing the charge separation of ZCS. The accepted electrons by CeO₂ may easily be captured by the adsorbed O₂ to form O₂⁻, and then O₂⁻ could combine with H⁺/H₂O to form HO₂, and OH. Finally, O₂⁻, h⁺ and OH are confirmed as the major oxidative species in photocatalytic reaction for Ce@ZCS, and a possible photocatalytic mechanism is proposed. The cheap, efficient Ce@ZCS photocatalyst could be applied for practical waste water treatment.     

Copper-catalyzed synthesis of oxime ethers from iminoxy radical (CN–O) and maleimides via radical addition

An efficient Cu(II)-catalyzed radical addition of maleimides has been achieved. The identified copper catalyst enables the formation of oxime radicals (N–O) by cleaving the O–H bond in ketoximes, followed by the radical addition to N-substituted maleimides. The oxime radicals (N–O) were detected and confirmed by EPR spectroscopy and variable-temperature ¹H NMR. The simple one-pot reaction realizes the facile preparation of a variety of oxime ether adduct products in moderate to good yields.     

High active amorphous Co(OH)2 nanocages as peroxymonosulfate activator for boosting acetaminophen degradation and DFT calculation

Acetaminophen (ACE) is commonly used in analgesic and antipyretic drug, which is hardly removed by traditional wastewater treatment processes. Herein, amorphous Co(OH)₂ nanocages were explored as peroxymonosulfate (PMS) activator for efficient degradation of ACE. In the presence of amorphous Co(OH)₂ nanocages, 100% of ACE removal was reached within 2 min with a reaction rate constant k₁ = 3.68 min^?1 at optimum pH 5, which was much better than that of crystalline β-Co(OH)₂ and Co₃O₄. Amorphous materials (disorder atom arrangement) with hollow structures possess large specific surface area, more reactive sites, and abundant vacancies structures, which could efficiently facilitate the catalytic redox reactions. The radicals quenching experiment demonstrated that SO₄^? radicals dominated the ACE degradation rather than OH radicals. The mechanism of ACE degradation was elucidated by the analysis of degradation intermediates and theoretical calculation, indicating that the electrophilic SO₄^? and OH tend to attack the atoms of ACE with high Fukui index (f ^?). Our finding highlights the remarkable advantages of amorphous materials as heterogeneous catalysts in sulfate radicals-based AOPs and sheds new lights on water treatment for the degradation of emerging organic contaminants.     

Metabolomics techniques applied in the investigation of phenolic acids from the agro-industrial by-product of Carapa guianensis Aubl

Processing of Carapa guianensis seeds to obtain oil on an industrial scale generates a significant amount of by-product, approximately 66% w/w, which is called cake and is a potential source of biomolecules, including simple phenolic structures. For this reason, studies were carried out on the chemical profiles of hydrolyzed extract from this agro-industrial by-product through High Performance Thin-Layer Chromatography (HPTLC) and Gas Chromatography coupled to Mass Spectrometry (GC–MS). These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product. The sample antioxidant capacity was determined by methods of 2,2-diphenyl-1-picrylhydrazyl (DPPH)and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS⁺) radicals direct sequestration. The hydrolyzed fraction showed a total of 63.47% in the relative abundance of the total of compounds, standing out: p-hydroxybenzoic acid (39.19%) and protocatechuic acid (3,4-dihydroxybenzoic acid) (5.62%), both from hydroxybenzoic acids and 3-(3,4-dihydroxyphenyl)lactic acid, (7.76%) hydroxycinnamic acids derivatives. In these results, the fraction rich in simple phenolic acids was obtained, attributing the prominent behavior of this matrix antioxidant activity, expressed by (IC₅₀: of 16.42 µg/mL and 6.52 µg/mL for DPPH and ABTS⁺ radicals, respectively). The research demonstrated an alternative to applicability that involves sustainability from agro-industrial. These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product, generating a process capable of converting biomass into a bioproduct, consisting of bioactive compounds, in addition to adding value to the industrial chain.     

Pretreatment of polyvinyl alcohol by electrocoagulation coupling with catalytic oxidation: Performance,mechanism and pathway

In this study, various conditions for the removal of polyvinyl alcohol (PVA) by electrocoagulation (EC) coupled catalytic oxidation are systematically studied. The direct oxidation of the anode, the reduction of the cathode, the oxidation of OH and Cl, and the synergistic effect of flocculation on the degradation of polyvinyl alcohol are investigated. It is observed that the optimum experimental conditions obtained are as follows: Cell voltage 9 V, natural pH 7, NaCl concentration 0.02 mol/L, and interelectrode distance 3.0 cm. The evolution of iron ions is also discussed in the EC process. By contrast, EC had made an outstanding contribution to the removal of PVA, which removes 71.29% of PVA. Free radicals, especially OH and Cl, are equivalent to the contribution of the electrodes in the degradation of PVA. And the contribution of PVA degradation by anode oxidation and cathode reduction are 12.76% and 8.02%, respectively. Characterization of solution and floc, such as Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), GC–MS and molecular weight, showed that PVA is effectively removed by the EC process, and a possible degradation pathway is proposed     

HPLC–DAD–MS identification of polyphenols from Passiflora leschenaultii and determination of their antioxidant,analgesic, anti-inflammatory and antipyretic properties

Passion fruit (Passiflora leschenaultii DC), an endemic species to peninsular India, is traditionally used to treat various ailments such as dysentery, urinary stone disease and wounds. The present study aimed to investigate the antioxidant, analgesic, anti-inflammatory, antipyretic activities and chemical composition of leaf extracts of P. leschenaultii. Bioactive secondary metabolites such as total phenolics, tannins and flavonoids were quantified. Antioxidant activities were determined by DPPH, ABTS⁺, FRAP, metal chelating and phosphomolybdenum assays. Hot plate, acetic acid and formalin induced pain models were used to evaluate the analgesic activity. In order to study the acute and chronic anti-inflammatory activities, carrageenan and cotton pellet induced models were used in rats. Brewer’s yeast induced pyrexia method was applied for the antipyretic test. Functional compounds from the plant were identified and quantified through HPLC–DAD–MS analysis. The obtained results revealed that the acetone extract of leaves exhibited higher phenolic (440.24 mg GAE/g extract) and flavonoid (253.33 mg RE/g extract) contents and scavenged the DPPH (IC₅₀ 29.14 μg/mL), ABTS⁺ (10509.69 μM TEAC/g extract) effectively. On investigating the analgesic, anti-inflammatory and antipyretic activities, the acetone extracts of leaves, at a dose of 400 mg/kg (p.o.) reduced significantly (p < 0.001) the pain, inflammation and fever responses in vivo. Bioactive compounds such as hyperin, chlorogenic acid, rutin and caffeic acids were identified in the leaves of P. leschenaultii employing HPLC–DAD–MS analysis. These findings illustrate the excellent potential of this species as valuable source of natural phytochemicals with pharmacological properties.     

Oxygen dependent oxidation of trimethoprim by sulfate radical: Kinetic and mechanistic investigations

Trimethoprim (TMP) is a typical antibiotic to treat infectious disease, which is among the most commonly detected antibacterial agents in natural waters and municipal wastewaters. In the present study, the impacts of dissolved oxygen (DO) on the oxidation efficiency and pathways of TMP by reaction with sulfate radicals (SO₄⁻) were investigated. Our results revealed that the presence of DO was favourable for TMP degradation. Specifically, TMP would react initially with SO₄⁻ via electron-transfer process to form a carbon-centered radical. In the absence of oxygen, the carbon-centered radical could undergo hydrolysis to produce α-hydroxytrimethoprim (TMP−OH), followed by the further oxidation which generated α-ketotrimethoprim (TMP=O). However, in the presence of oxygen, the carbon-centered radical would alternatively combine with oxygen, leading to a sequential reaction in which peroxyl radical and a tetroxide were formed, and finally generated TMP−OH and TMP=O simultaneously. The proposed pathways were further confirmed by density functional theory (DFT) calculations. The results obtained in this study would emphasize the significance of DO on the oxidation of organic micro-pollutants by SO₄⁻.     

Visible light induced efficient activation of persulfate by a carbon quantum dots (CQDs) modified γ-Fe2O3 catalyst

In this study, a carbon quantum dots modified maghemite catalyst (CQDs@γ-Fe₂O₃) has been synthesized by a one-step solvothermal method for efficient persulfate (PDS) activation under visible light irradiation. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS) characterization indicated that the formation of heterojunction structure between CQDs and γ-Fe₂O₃ effectively reduced the catalyst band gap (E_g), favoring the separation rate of electrons and holes, leading to remarkable efficient sulfamethoxazole (SMX) degradation as compared to the dark-CQDs@γ-Fe₂O₃/PDS and vis-γ-Fe₂O₃/PDS systems. The evolution of dissolved irons also demonstrated that CQDs could accelerate the in-situ reduction of surface-bounded Fe³⁺. Electron paramagnetic resonance (EPR) and radical scavenging experiments demonstrated that both OH and SO₄⁻ were generated in the reaction system, while OH was relatively more dominant than SO₄⁻ for SMX degradation. Finally, the reaction mechanism in the vis-CQDs@γ-Fe₂O₃/PDS system was proposed involving an effective and accelerated heterogeneous-homogeneous iron cycle. CQDs would enrich the photo-generated electrons from γ-Fe₂O₃, causing efficient interfacial generation of surface-bond Fe²⁺ and reduction of adsorbed Fe³⁺. This visible light induced iron cycle would eventually lead to effective activation of PDS as well as the efficient degradation of SMX.     

New insight in the O2 activation by nano Fe/Cu bimetals: The synergistic role of Cu(0) and Fe(II)

This study demonstrated that as-synthesized nano Fe/Cu bimetals could achieve significant enhancement in the degradation of diclofenac (DCF), as compared to much slow removal of DCF by Cu(II) or zero valent iron nanoparticles (nZVI), respectively. Further observations on the evolution of O₂ activation process by nano Fe/Cu bimetals was conducted stretching to the preparation phase (started by nZVI/Cu²⁺). Interesting breakpoints were observed with obvious sudden increase in the DCF degradation efficiency and decrease in solution pH, as the original nZVI just consumed up to Fe(II) and Cu(II) appeared again. It suggested that the four-electrons reaction of O₂ and Cu-deposited nZVI would occur to generate water prior to the breakpoints, while Cu(0) and Fe(II) would play most important role in activation of O₂ afterwards. Through the electron spin resonance (ESR) analysis and quenching experiments, OH was identified as the responsible reactive species. Further time-dependent quantifications in the cases of Cu(0)/Fe(II) systems were carried out. It was found that the OH accumulation was positively and linearly correlated with nCu dose, Fe(II) consumption, and Fe(II) dose, respectively. Since either Cu(0) or Fe(II) would be inefficient in activating oxygen to produce OH, a stage-evolution mechanism of O₂ activated by nano Fe/Cu bimetals was proposed involving: (a) Rapid consumption of Fe(0) and release of Fe(II) based on the Cu-Fe galvanic corrosion, (b) adsorption and transformation of O₂ to O₂²⁻ at the nCu surface, and (c) Fe(II)-catalyzed activation of the adsorbed O₂²⁻ to OH.     

InP quantum dots on g-C3N4 nanosheets to promote molecular oxygen activation under visible light

Largely limited by the high dissociation energy of the OO bond, the photocatalytic molecular oxygen activation is highly challenged, which restrains the application of photocatalytic oxidation technology for atmospheric pollutants removal. Herein, we design and fabricate the InP QDs/g-C₃N₄ compounds. The introduction of InP QDs promotes the charge transfer within the interface resulting in the effective separation of photo-generated carriers. Furthermore, InP QDs greatly facilitates the activation of molecular oxygen and promote the formation of O₂⁻ under visible-light illumination. These conclusions are identified by experimental and calculation results. Hence, NO can be combined with the O₂⁻ to form OONO intermediate to direct conversion into NO₃⁻. As a result, the NO removal ratio of g-C₃N₄ has a onefold increase after InP QDs loaded and the generation of NO₂ is effectively inhibited. This work may provide a strategy to design highly efficient materials for molecular oxygen activation.     

Protein nanoparticles containing Cu(II) and DOX for efficient chemodynamic therapy via self-generation of H2O2

Chemodynamic therapy (CDT) refers to generating hydroxyl radical (OH) in tumor sites via hydrogen peroxide (H₂O₂) catalyzed by transition metal ions in cancer cells under acidic environment. However, H₂O₂ content is not enough for effective CDT, although H₂O₂ content in cancer cells is higher than that of normal cells. Herein, we synthesized DOX@BSA-Cu NPs (nanoparticles) for effective CDT by providing enhanced content of H₂O₂ in cancer cells. The results proved Cu²⁺ in NPs could be reduced to Cu⁺ by glutathione (GSH) and effectively converted H₂O₂ to OH. Moreover, the loaded low-dose doxorubicin (DOX) in the NPs could improve the content of H₂O₂ and resulted in more efficient generation of OH in cancer cells. Thus DOX@BSA-Cu NPs exhibited higher cytotoxicity to cancer cells. This research may provide new ideas for the further studies on more effective Cu(II)-based CDT nanoagents.     

Electro-catazone treatment of an ozone-resistant drug: Effect of sintering temperature on TiO2 nanoflower catalyst on porous Ti gas diffuser anodes

Electrochemical heterogeneous catalytic ozonation (E-catazone) is a promising and advanced oxidation technology that uses a titanium dioxide nanoflower (TiO_2-NF)-coated porous Ti gas diffuser as an anode material. Our previous study has highlighted that the importance of the TiO_2-NF coating layer in enhancing OH production and rapidly degrading O₃-resistant drugs. It is well known that the properties of TiO_2-NF are closely related to its sintering temperature. However, to date, related research has not been conducted in E-catazone systems. Thus, this study evaluated the effect of the sintering temperature on the degradation of the O₃-resistant drug para-chlorobenzoic acid (p-CBA) using both experimental and kinetic modeling and revealed its influence mechanism. The results indicated that the TiO_2-NF sintering temperature could influence p-CBA degradation and OH production. TiO_2-NF prepared at 450 °C showcased the highest p-CBA removal efficiency (98.5% in 5 min) at a rate of 0.82 min⁻¹, and an OH exposure of 8.41 × 10⁻¹⁰ mol L⁻¹ s. Kinetic modeling results and interface characterization data revealed that the sintering temperature could alter the TiO₂ crystallized phase and the content of surface-adsorbed oxygen, thus affecting the two key limiting reactions in the E-catazone process. That is, ≡TiO₂ surface reacted with H₂O to form TiO₂-(OH)₂, which then heterogeneously catalyzed O₃ to form OH. Consequently, E-catazone with a TiO_2-NF anode prepared at 450 °C generated the highest surface reaction rate (5.00 × 10⁻¹ s⁻¹ and 4.00 × 10^-3 L mol^-1 s⁻¹, respectively), owing to its higher anatase content and adsorbed oxygen. Thus, a rapid O₃-TiO₂ reaction was achieved, resulting in an enhanced OH formation and a highly effective p-CBA degradation. Overall, this study provides novel baseline data to improve the application of E-catazone technology.     

Ultrafast O2 activation by copper oxide for 2,4-dichlorophenol degradation: The size-dependent surface reactivity

This study demonstrated interesting ultrafast activation of molecular O₂ by copper oxide (CuO) particles and very rapid elimination of aqueous 2,4-dichlorophenol (2,4-DCP) within reaction time of 30 s. Electron paramagnetic resonance (EPR) characterization indicated that OH, Cu³⁺, ¹O₂ and O₂⁻ were generated in the CuO/O₂ systems, wherein O₂⁻ would be the main reactive species responsible for 2,4-DCP degradation. It was further found that the catalytic ability of CuO for O₂ activation was highly size dependent and nano-CuO was far reactive than micro-CuO. H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM) analyses revealed that both the quantity and the reactivity of the surface reaction sites (surface Cu⁺ and O₂) could determine the catalytic ability of CuO affecting efficient Cu⁺-based molecular oxygen activation. Moreover, the O₂ activation ability of CuO would depend on not only the dimension, but also crystalline factors, for example, the exposed facets.     

Effective removal of chlorinated organic pollutants by bimetallic iron-nickel sulfide activation of peroxydisulfate

Chlorinated organic pollutants(COPs) have caused serious contaminants in soil and groundwater,hence developing methods to remove these pollutants is necessary and urgent.By a simple hydrothermal method,we synthesized the bimetallic iron-nickel sulfide(FeNiS) particles which exhibited excellent catalytic property of COPs removal.FeNiS was chosen as the peroxydisulfate(PDS) activator to removal COPs including 4-chlorophenol(4-CP),1,4-dichlorophenol(1,4-DCP) and 2,4,6-trichlorophenol(2,4,6-TCP).The results show that FeNiS can efficiently activate PDS to produce sulfate radical(SO_4~(·-)) which plays major role in the oxidative dechlorination and degradation due to its strong oxidizing property and the ability of producing hydroxyl radicals(~·OH) in the alkaline condition.Meanwhile,the Cl-abscised from COPs during the dechlorination can turn into the chlorine radicals and enhance the degradation and cause further mineralization of intermediate products.This bimetallic FeNiS catalyst is a promising PDS activator for removal of chlorinated organics.     

Chitosan capped silver nanoparticles: Adsorption and photochemical activities

Chitosan capped silver nanoparticles (Chi-Ag) were prepared using AgNO₃ and sodium borohydride. Chitosan was detected by using ninhydrin test, thermal gravimetric analysis and measurement of relative viscosity. Chi-Ag was used for removal of cadmium (Cd²⁺) at room temperature. The maximum monolayer adsorption capacity, and sorption intensity were estimated to be 119.04 mg/g and 1.6, respectively, from Langmuir and Freundlich adsorption isotherm models. The kinetics of Cd²⁺ adsorption onto Chi-Ag was proceeds through the pseudo-second-order kinetic model. Boyd and Elovich models suggest the adsorption and/or coordination of Cd²⁺ with the NH₂ and OH groups of chitosan along with AgNPs proceeds through the film diffusion and chemisorption process. The average viscosity molecular weight of chitosan and Chi-Ag decreased with increased potassium persulfate (K₂S₂O₈) and hydrogen peroxide (H₂O₂) concentration. The presence of H₂O₂ and K₂S₂O₈ promoted the hydrolysis of chitosan due to the cleavage of glycosidic bond by generated HO and SO₄^? radicals.     

Biogenic fabrication of silver nanoparticles,oxidative dissolution and antimicrobial activities

Metallic silver nanoparticles (AgNPs) were prepared by using Foeniculum vulgare Mill seeds extract. The silver nitrate was used as silver precursor in an aqueous solution. The photooxidative dissolution of AgNPs with persulfate (K₂S₂O₈) under UV light was investigated. Effects of initial concentration of K₂S₂O₈, AgNPs, initial solution pH, and temperature were studied on dissolution of AgNPs. The 100% AgNPs dissolution was achieved in 60 min under typical conditions (pH = 4.0, 1.2 mM K₂S₂O₈, and 30 ⁰C). The experimental results showed higher temperature brought faster dissolution rate, and the activation energy was 65.2 kJ/mol. The effects of ethanol, tertiary butanol, and nitrobenzene were studied to establish the role of SO₄^? and HO radical species. AgNPs dissolution was inhibited by Cl^?, Br^?, I^?, and NO₃^? ions. Staphylococcus auerus (s. aureus), Escherichia coli (E. coli) and Candida albicans (C. albicans) were the effective human pathogens against the AgNPs. The lag phase, growth kinetics, minimum bactericidal concentration, death rate, and antimicrobial efficacy depend on the concentration of AgNPs.     

Comparative antiradical activity and molecular Docking/Dynamics analysis of octopamine and norepinephrine: the role of OH groups

Octopamine is a neurotransmitter in invertebrates and a phenol analog of norepinephrine. The crystallographic and spectral (UV–visUV, and NMR) characteristics of octopamine were investigated experimentally and theoretically by applying appropriate level of theory, B3LYP-D3BJ/6-311++G(d,p), which reproduced well the experimental bond lengths and angles. The intramolecular interactions governing the stability of conformers were described by NBO and QTAIM analyses. The antiradical potencies of octopamine and norepinephrine towards DPPH and ABTS⁺ were examined with special emphasis on the preferred mechanism and effect of catechol moiety. Several techniques were used to distinguish Hydrogen Atom Transfer (HAT) and Proton Coupled Electron Transfer (PCET) mechanisms for reaction with DPPH. The calculated rate constants of the reactions with both radicals showed that Sequential Proton Loss Electron Transfer (SPLET) mechanism was dominant both thermodynamically and kinetically, with values of thermodynamic functions and rate constants clearly proving the importance of the second hydroxyl group in structure. The Molecular Docking and afterward Molecular Dynamics calculations of formed complexes between octopamine/norepinephrine with β1- and β2- adrenergic receptors examined in details the interactions that lead to the formation of stable complexes. The number of strong interactions of amino acids with norepinephrine was higher, but the absence of hydroxyl group in octopamine did not lead to a significant change in the type of interactions and stability. The formed complexes showed higher flexibility of amino acids, similar compactness of structure as proteins and increased interatomic distances of the backbone when compared to pure proteins.