Visible light assisted photocatalytic degradation of organic dyes on TiO2–CNT nanocomposites

Journal of Sol-Gel Science and Technology - Carbon nanotubes (CNTs) uniformly decorated with nano-anatase TiO2 particles corresponding to different TiO2–CNT weight ratios (up to 90 %...     

Photocatalytic degradation kinetics of methyl orange in TiO2–SiO2–NiFe2O4 aqueous suspensions

Photocatalytic degradation of methyl orange by TiO₂–SiO₂–NiFe₂O₄ suspensions was investigated. Adsorption studies revealed photocatalytic degradation occurred mainly on the surface of the TiO₂–SiO₂–NiFe₂O₄. The disappearance of the compound followed the zero-order kinetics according to the Langmuir–Hinshelwood model and the rate constant was 0.0035 mg L^?1 min^?1. The rate constant depended on the amount of photocatalyst, initial pH, and the presence of additional scavengers. ^?OH radicals and h⁺ had important roles in the photocatalytic degradation of methyl orange by TiO₂–SiO₂–NiFe₂O₄.     

Radiation-induced grafting of multi-walled carbon nanotubes in glycidyl methacrylate–maleic acid binary aqueous solution

With the aim to improve the compatibility between multi-walled carbon nanotubes (MWCNTs) and nylon-6, purified MWCNTs (p-MWCNTs) were grafted successfully with glycidyl methacrylate–maleic acid in aqueous solution using a single-step radiation method. The chemical structure and morphology of grafted p-MWCNTs (g-MWCNTs) was investigated by micro-FTIR, Raman spectroscopy and transmission electron microscopy. The prepared nylon-6/g-MWCNTs composite has higher mechanical strength and heat distortion temperature due to improved dispersion and compatibility than those of nylon-6/p-MWCNTs.     

Solar light assisted degradation of dyes and adsorption of heavy metal ions from water by CuO–ZnO tetrapodal hybrid nanocomposite

We report a facile and economic hydrothermal process for multifunctionally engineered copper oxide/zinc oxide-tetrapods (CuO/ZnO-T) nanocomposite for wastewater treatment. The resultant CuO/ZnO-T nanocomposite possesses high porosity, large surface area, and low band gap. All these properties are advantageous for photocatalyst and adsorbent for dyes and heavy metal ions removal. The morphology of synthesized nanocomposite was characterized using X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller, Fourier-transform infrared spectroscopy, and UV–Visible absorption spectroscopy. The results confirmed the attachment of CuO on the ZnO-T surface, forming a hybrid nanocomposite. The concentration of heavy metal ions was monitored using the atomic absorption spectroscopy technique. The synthesized CuO/ZnO-T nanocomposite was investigated for the decontamination of anionic and cationic dyes, Reactive yellow-145 (RY-145) and Basic violet-3 (BV-3) and heavy metal ions (Chromium (VI) and Lead (II)). The CuO/ZnO-T nanocomposite exhibited superior photocatalytic efficiency (80% RY-145 dye removal and 86% BV-3 dye removal) and adsorption capacity (99% Chromium (VI) removal and 97% Lead (II) removal) as compared to pristine ZnO-T. The mechanism for the reduction of dyes and heavy metal ions was discussed by different kinetics and isotherm models. The current study inferred that CuO/ZnO-T nanocomposite is a potential candidate as a proficient photocatalyst/adsorbent for the removal of various wastewater contaminants.     

Oxidative degradation of polyglycols by the Ruff’s system in the aqueous solutions

We have studied oxidative degradation of polypropylene glycol and polyethylene glycols of varied molecular mass induced by hydrogen peroxide in the presence of iron(III) ions. At pH 3, the process is accompanied by aggregation of iron hydroxides and occurs in the microheterogeneous system. In the cases of high-molecular substrates, the oxidation is accompanied by decrease in the polymer globulas size due to the degradation of the polymer chain.     

Enzyme mediated synthesis of Ag–TiO2 photocatalyst for visible light degradation of reactive dye from aqueous solution

The purpose of this study was to develop bio-inspired photocatalyst with solar light activity for textile dye degradation. Three TiO₂ samples namely TiO₂ (TiO₂-A), biotemplated TiO₂ (TiO₂-B), and enzyme mediated Ag–TiO₂ biotemplate (TiO₂-C), were developed. The presence of anatase phase of TiO₂ and silver in synthesized samples were confirmed using X-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectroscopy, and UV–Vis–NIR spectroscopy. Photocatalytic efficiencies of these photocatalysts were evaluated by studying the oxidation of a commercial reactive dye (reactive black) under solar light irradiation in batch reactors. Photocatalytic efficiencies of the sample were compared using statistical tools like one-way ANOVA and Tukey test. The results confirmed that photocatalytic efficiency of TiO₂-C was 40 % higher than that of TiO₂-A under solar light irradiation.     

The features of absorption of aqueous–organic mixtures by polyurethane–poly(2-hydroxyethyl methacrylate) matrix by the data of NMR spectroscopy

The features of hydration of the interpenetrating polymer network consisting of 83% polyurethane and 17% poly(2-hydroxyethyl methacrylate) as well as the initial polymers are studied by the method of lowtemperature NMR spectroscopy. It is shown that the two-component polymer matrix is capable of absorption of significant amounts of water in the form of clusters, with the size strongly depending on the presence of organic compounds, such as chloroform and trifluoroacetic acid. Thus, the changes in the medium composition allow one to control the state of water absorbed by the polymer in a wide range. The found effect may be used to create materials with the controlled delivery of biologically active substances whose retention by the matrix is determined to a great extent by the energy of binding of water by the polymer.     

Microwave assisted efficient synthesis of β-keto-sulfones in aqueous medium

Abstract

An efficient synthesis of β-keto-sulfones is described. The reaction of α-haloketones with sodium alkyl/aryl sulphinates in aqueous medium under microwave irradiation afforded the corresponding β-keto-sulfones in excellent yields.     

Preparation of superhydrophobic silica nanoparticles by microwave assisted sol–gel process

Hydrophobic silica nanoparticles were obtained by microwave assisted sol–gel method using a two-step procedure. In the first step different size silica particles were generated from tetraethyl orthosilicate and in the second one the silica particles were hydrophobized using hexadecyl trimethoxysilane (HDTMOS). Under microwave irradiation, high conversion degrees were obtained at relatively short reaction times. The HDTMOS added in the second step instead of coating the silica nanoparticles generated new ones and therefore the final product showed a bimodal size distribution. All the synthesized nanoparticles gave rise to high water contact angles (≈150°) and low hysteresis values.     

The degradation of polyacrylamide in aqueous solution induced by chemically generated hydroxyl radicals: Part II—Autoxidation of Fe2+

Hydroxyl radicals, generated by the autoxidation of Fe²⁺, have been shown to attack polyacrylamide molecules in solution and cause chain scission. In acid solution the extent of degradation is determined by the rate of autoxidation which is very dependent on pH and the chelation of the iron. In alkaline solution degradation is negligible.     

An ambient temperature aqueous sol–gel processing of efficient nanocrystalline doped TiO2-based photocatalysts for the degradation of organic pollutants

An environmentally-friendly aqueous sol–gel process for producing undoped and Cu²⁺, Ni²⁺, Zn²⁺ or Pb²⁺-doped TiO₂ photocatalysts exhibiting a remarkably high photocatalytic activity without requiring any calcination step has been developed. The physicochemical properties of the catalysts were characterized by ICP-AES, XRD, UV–Vis spectroscopy and nitrogen adsorption–desorption. It has been found that the catalysts are composed of nanocrystallites of anatase with a size of 6–7 nm and a specific surface area varying from 184 to 275 m² g^?1. A screening of the photocatalytic activity of the undoped and doped photocatalysts has been performed by evaluating the degradation of 4-nitrophenol under artificial light (330 nm < λ < 800 nm) after 7 h of illumination using a custom-designed multisample photoreactor. The activity measured for the TiO₂-Undoped catalyst was found to be five times higher than the activity measured for uncalcined TiO₂ catalysts produced by other sol–gel methods. We propose that this interesting result is due to the particular morphology of the xerogels obtained. It has also been demonstrated that the presence of the dopant leads to an enhancement of the photocatalytic activity in all cases. The role of particular dopants in modulating the photocatalytic activity will be discussed. Finally, the possibility of producing undoped and Zn²⁺-doped films presenting a higher activity than the commercial photocatalytic coating (Saint Gobain Glass Bioclean^®) without requiring any calcination step has been demonstrated. These preliminary results constitute an important step forward in the development of photocatalytic films using a sol–gel process compatible with the constraints associated with large-scale industrial processing.     

Cu–ZnO nanocrystallites by aqueous thermolysis method

ZnO and different atomic percentages of Cu-doped ZnO nanocrystallites have been prepared by aqueous thermolysis method using Glycine as a fuel and encapsulating agent. Mechanism and formation of intermediate products have been given for the first time. All the findings given are for samples annealed at 800?°C. XRD of nanocrystalline ZnO and Cu?CZnO has been indexed to hexagonal wurtzite structure. Influence of temperature on thermal properties of gel precursor and Cu-doped ZnO nanoparticles have been investigated using thermogravimetric and differential thermal analysis. Accordingly, samples have been annealed at different temperatures. Infrared studies revealed formation of Cu?CZnO nanoparticles and removal of organic matter at higher temperature.     

Study on thermal degradation of cattlehide collagen fibers by simultaneous TG–MS–FTIR

Leather was useful materials since dawn of human history for excellent properties, but thermal degradation mechanism was not very clear yet. In this paper, much progress has been made in elucidating the thermal stability and thermal degradation mechanism by thermoanalytical study in argon. Thermogravimetric analysis simultaneously coupled with mass spectrometry and Fourier transform infrared spectrometry was employed to study the thermal degradation of cattlehide collagen fibers through in-depth analysis of the evolved gas. Thermogravimetry analyses carried out on sample, deprived from any residual catalyst and highlighted a two-step thermal degradation. New evidence demonstrates that the process during temperature range from 373 to 513 K was phase transformation. Photographs of polarizing microscope confirmed the conclusion. The decomposition of cattlehide collagen fibers starts at about 523 K. The cattlehide collagen fibers may undergo the process of melting, oxidation and decomposition. In decomposition, more than three steps take place. The mass spectra and Fourier transform infrared spectrometry stated clearly that double bond of carbon to oxygen, carbon to sulfur and carbon to nitrogen were destroyed firstly because the carbon dioxide, carbon monoxide and ammonia evolved simultaneously. The second peak of carbon monoxide in mass spectra indicated that some organic fragments were decomposed above 1073 K which confirmed that thermal degradation of leather is more than three steps.     

Fabrication and characterization of NiTiO3 nanofibers by sol–gel assisted electrospinning

Continuous NiTiO₃ nanofibers have been successfully synthesized by a sol–gel assisted electrospinning method followed by calcination at 600 °C in air. These nanofibers were characterized for the morphological, structural and optical properties by scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV–visible (UV–vis) diffuse reflectance spectroscopy (DRS). SEM results reveal that the obtained NiTiO₃ nanofibers are 175 nm in diameter and several micrometers in length after annealing at 600 °C. The XRD analysis shows that the nanofibers possess highly crystalline structure with no impurity phase. In contrast, the NiTiO₃ nanoparticles synthesized at the identical conditions by a sol–gel route have impurities including TiO₂ and NiO. Moreover, the electrospun NiTiO₃ nanofibers are endowed with an obvious optical absorbance in the visible range, demonstrating they have visible light photoresponse.     

EDTA assisted sol–gel synthesis of ZrW2O8

A novel sol–gel synthetic route using water-soluble precursor salts is presented as a synthetic path for a high-purity negative thermal expansion material, ZrW₂O₈. This synthetic route involves a sol–gel method with the use of EDTA as complexing agent. The aqueous solution is transformed into a ceramic material after a two-step heat treatment: gelation at 60 °C and reactive sintering at 1,180 °C. The decomposition of the gel is monitored with infrared spectroscopy and TGA. The high-temperature heat treatment results in ZrW₂O₈ with its characteristic negative thermal expansion behaviour α_{[75–130 °C]}: −9.8 ± 1.6 μm/m °C and α_{[175–300 °C]}: −1.2 ± 0.2 μm/m °C.     

Electrochemical extraction of cerium and formation of Al–Ce alloy from CeO_2 assisted by AlCl_3 in LiCl–KCl melts

This work presents an electrochemical extraction of cerium and synthesization of Al–Ce alloy in LiCl–KCl melts on Mo and Al electrodes by chlorination of CeO2 using AlCl3 at 873 K. The cyclic voltammogram on Mo electrodes in LiCl–KCl–CeO2 melt showed no obvious reduction wave other than the reduction of Li(I). After the addition of AlCl3, the signals of the reaction of Ce(ⅡI)/Ce(0) and the synthesization of Al–Ce and Al–Li alloys were investigated by cyclic voltammetry, square-wave voltammetry, open-circuit chronopotentiometry and chronopotentiometry. These results indicated that AlCl3 can chloridize CeO2 and that it is possible to extract cerium and form Al–Ce and Al–Li–Ce alloys in LiCl–KCl–CeO2–AlCl3 melts. According to potentiostatic electrolysis, only the Al4 Ce layer coated the Al electrodes. According to galvanostatic electrolysis, Al–Ce(Al4Ce, Al3 Ce, and Al92Ce8), Al2Li3, and Al phases were formed on Mo electrodes, and the content of cerium in the Al–Li–Ce alloys was more than 17 wt%.     

Photocatalytic degradation of Orange II by titania addition to sol–gel glasses

Glasses on SiO₂–CaO–ZnO–B₂O₃–K₂O–Al₂O₃ oxide system modified by addition of titania (0, 3, 5, 12, and 20% w) have been prepared by sol–gel method. The obtained gels were aged, dried and fired at 600 °C/1 h in order to stabilise the glass. The resulting fired powders were characterised by UV–Vis–NIR spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD). Their photocatalytic capacity on the degradation of Orange II dye has been studied. The XRD and TEM studies indicate that system becomes amorphous with a nanostructured microstructure. From UV–Vis–NIR results the band gap calculated is around 3.5 eV for all modified glasses. Photoactivity of powders depends on amount of titania in glass composition and the specific surface area of prepared samples. The sample with highest surface area and lowest addition of titania (3% w sample) shows similar activity than commercial anatase used as reference.     

Determination of priority pollutants in aqueous samples by dispersive liquid–liquid microextraction

A dispersive liquid–liquid microextraction (DLLME) method followed by high-performance liquid chromatography–triple quadrupole mass spectrometry has been developed for the simultaneous determination of linear alkylbenzene sulfonates (LAS C₁₀, C₁₁, C₁₂, and C₁₃), nonylphenol (NP), nonylphenol mono- and diethoxylates (NP₁EO and NP₂EO), and di-(2-ethylhexyl)phthalate (DEHP). The applicability of the method has been tested by the determination of the above mentioned organic pollutants in tap water and wastewater. Several parameters affecting DLLME, such as, the type and volume of the extraction and disperser solvents, sample pH, ionic strength and number of extractions, have been evaluated. Methanol (1.5 mL) was selected among the six disperser solvent tested. Dichlorobenzene (50 μL) was selected among the four extraction solvent tested. Enrichment factor achieved was 80. Linear ranges in samples were 0.01–3.42 μg L⁻¹ for LAS C₁₀–₁₃ and NP₂EO, 0.09–5.17 μg L⁻¹ for NP₁EO, 0.17–9.19 μg L⁻¹ for NP and 0.40–17.9 μg L⁻¹ for DEHP. Coefficients of correlation were higher than 0.997. Limits of quantitation in tap water and wastewater were in the ranges 0.009–0.019 μg L⁻¹ for LAS, 0.009–0.091 μg L⁻¹ for NP, NP₁EO and NP₂EO and 0.201–0.224 μg L⁻¹ for DEHP. Extraction recoveries were in the range from 57 to 80%, except for LAS C₁₀ (30–36%). The method was successfully applied to the determination of these pollutants in tap water and effluent wastewater from Seville (South of Spain). The DLLME method developed is fast, easy to perform, requires low solvent volumes and allows the determination of the priority hazardous substances NP and DEHP (Directive 2008/105/EC).     

Synthesis of an Ag–ZnO nanocomposite catalyst for visible light-assisted degradation of a textile dye in aqueous solution

The photocatalytic activity of silver-deposited ZnO in the photodegradation of methyl orange (MO) was investigated. The as-prepared photocatalysts were characterized by X-ray diffraction, UV–visible diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The results showed that the silver-deposited ZnO had a visible light plasmon absorption band. The photocatalytic degradation experiment revealed that the catalytic efficiency of the Ag–ZnO composite in the degradation of MO was greater than that of pure ZnO samples. This study shows that the degradation process is dominated by the Ag–ZnO photocatalytic system, complying with a pseudo-first-order rate law. Under the experimental conditions, approximately 65.0% dye removal was achieved within 100 min.