A new binucleating ligand incorporating four oxime groups and its copper(II), manganese(II) and cobalt(III) complexes

A new binucleating ligand incorporating four oxime groups, butane-2,3-dione O-[4-aminooxy-2,3-bis-(2-hydroxyimino-1-methyl-propylideneaminooxymethyl)-but-2-enyl]-dioxime, (H₄mto), has been synthesized and its dinuclear cobalt(III), copper(II), and homo- and hetero-tetranuclear copper(II)–manganese(II) complexes have been prepared and characterized by ¹H- and ¹³C-n.m.r., i.r., magnetic moments and mass spectral studies. Elemental analyses, stoichiometric and spectroscopic data indicate that the metal ions in the complexes are coordinated to the oxime nitrogen atoms (C=N) and the data support the proposed structure for H₄mto and its complexes. Moreover, dinuclear cobalt(III) and copper(II) complexes of H₄mto have a 2:1 metal:ligand ratio.     

Facile synthesis and characterization of β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide as novel nanocomposites for efficient photocatalytic degradation of methylene blue dye

In this paper, our research team has synthesized new nanocomposites by simple precipitation/ignition method and using low-cost chemicals. Hence, β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide new nanocomposites were synthesized by precipitation of Mn(II)/Co(II)/Cu(II) solution using sodium hydroxide and ignition of precipitate at 700 °C for 3 hrs, respectively. The synthesized nanocomposites were characterized using different instruments such as energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), nitrogen gas sorption analyzer, and UV–vis spectrophotometer. Energy dispersive X-ray analysis revealed that the nanocomposite formed as a result of precipitation consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.73, 27.01, 17.26, and 24 %, respectively. Also, the nanocomposite formed as a result of ignition consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.26, 23.87, 14.56, and 30.31 %, respectively. Transmission electron microscope revealed that the nanocomposites formed as a result of precipitation and ignition consist of polyhedral and spherical shapes with an average diameter of 34.50 and 28.56 nm, respectively. The synthesized nanocomposites were used as new photocatalysts for the efficient degradation of methylene blue dye. 0.05 g of the synthesized nanocomposites degrade 100 % of 50 mL of 15 mg/L of methylene blue dye solution within 25 min in the presence of H₂O₂ under UV light.     

Facile synthesis of cobalt oxide/reduced graphene oxide composites for electrochemical capacitor and sensor applications

Reduced graphene oxide sheets decorated with cobalt oxide nanoparticles (Co₃O₄/rGO) were produced using a hydrothermal method without surfactants. Both the reduction of GO and the formation of Co₃O₄ nanoparticles occurred simultaneously under this condition. At the same current density of 0.5 A g⁻¹, the Co₃O₄/rGO nanocomposites exhibited much a higher specific capacitance (545 F g⁻¹) than that of bare Co₃O₄ (100 F g⁻¹). On the other hand, for the detection of H₂O₂, the peak current of Co₃O₄/rGO was 4 times higher than that of Co₃O₄. Moreover, the resulting composite displayed a low detection limit of 0.62 μM and a high sensitivity of 28,500 μA mM⁻¹cm⁻² for the H₂O₂ sensor. These results suggest that the Co₃O₄/rGO nanocomposite is a promising material for both supercapacitor and non-enzymatic H₂O₂ sensor applications.     

Synthesis,characterization, single crystal XRD,in vitro antimicrobial and cytotoxicity study of tris(ethylenediamine)cobalt(III)chloride oxalate trihydrate

The complex tris(ethylenediamine)cobalt(III)chloride oxalate trihydrate [Co(en)₃]Cl(C₂O₄)·3H₂O crystallizes in the monoclinic space group C₂/c with the following unit cell parameters a = 19.9318 (13), b = 9.3344 (4), c = 19.0881 (13) Å β = 96.846(3)°, Z = 8. The crystal structure was solved by direct methods and refined by full matrix least squares procedures to a final R value of 0.0314 for 4330 observed reflections. The reported cobalt complex is six co-ordinated through amine nitrogen with distorted octahedral geometry. There are uncoordinated chloride and oxalate ions along with the water molecules. In-vitro antimicrobial activity was studied against various test organisms and found to be good. From in-vitro cytotoxic activity of the synthesized complex, the IC₅₀ value was found to be 55.85 μg/ml.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.     

The effect of aluminium oxide on the reduction of cobalt oxide and thermostabillity of cobalt and cobalt oxide

During precipitation and calcination at 200°C nanocrystalline Co₃O₄ was obtained with average size crystallites of 13 nm and a well developed specific surface area of 44 m² g^?1. A small addition of a structural promoter, e.g. Al₂O₃, increases the specific surface area of the cobalt oxide (54 m² g^?1) and decreases the average size of crystallites (7 nm). Al₂O₃ inhibits the reduction process of Co₃O₄ by hydrogen. Reduction of cobalt oxide with aluminium oxide addition runs by equilibrium state at all the respective temperatures. The apparent activation energy of the recrystallization process of the nanocrystalline cobalt promoted by the aluminium oxide is 85 kJ mol^?1. Aluminium oxide improves the thermostability of both cobalt oxide and the cobalt obtained as a result of oxide phase reduction.      

New large-scale production route for synthesis of lithium nickel manganese cobalt oxide

The spray roasting process is recently applied for production of catalysts and single metal oxides. In our study, it was adapted for large-scale manufacturing of a more complex mixed oxide system, in particular symmetric lithium nickel manganese cobalt oxide (LiNi_1/3Co_1/3Mn_1/3O₂—NMC), which is already used as cathode material in lithium-ion batteries. An additional lithiation step was coupled with the main process in order to obtain the desired layered structure. Thermogravimetric analysis and high-temperature X-ray diffractometry built the basis for determining suitable synthesis temperature regions for the used chloride precursors and the post-treatment step. The optimized process was proven on an industrial pilot line where a setup for minimum production capacity of 12 kg h^?1 was possible. The powder obtained directly after roasting had a very striking morphology compared to the final lithiated product. Hollow aggregates (≥250 μm) with overall 10.926 m² g^?1 surface area and a pore diameter of 3.396 nm were observed. Their well-faceted primary particles were converted into nanosized spheres after lithiation, building a few micrometer big high-porous agglomerates. Actual composition was verified by inductively coupled plasma atomic emission spectroscopy analysis, and the crystal structure and corresponding unit cell parameters were identified and confirmed by Rietveld fit of the derived X-ray diffraction pattern. The initial electrochemical measurements show a 149-mAh g^?1discharge capacity, as determined from cyclic voltammetry.     

Effect of manganese nanoparticles on the mechanical, thermal and fire properties of polypropylene multifilament yarn

Polypropylene filled with 10 wt% of inorganic nanoparticles has been prepared by melt blending. The fillers investigated were manganese oxides (MnO and Mn₂O₃) and manganese oxalate (MnC₂O₄). The morphology and thermal stability of these nanocomposites have been studied by transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The experimental results reveal that the addition of 10 wt% manganese oxides improves the thermal stability in air of polypropylene by about 70-80 °C. In a second step, these nanocomposites have been processed by melt spinning in order to produce multifilament yarn. The mechanical properties of these filaments have then been characterized. It is shown that just the addition of Mn₂O₃ improves the mechanical properties of polypropylene filaments. The flammability of these nanocomposites used as knitted fabrics has finally been evaluated with a mass loss calorimeter at 35 kW/m². This kind of experiment has not revealed a real improvement of fire properties.     

Investigation on the catalytic activity of doped low-percentage oxide catalysts Mn/ZnO obtained from oxalate precursor

The precursors with a low manganese content ≤ 0.07% Mn were synthesized by spontaneous crystallization from Zn²⁺, Mn²⁺ and C₂O₄ ²⁻-containing solutions. The initial ratio Zn²⁺:C₂O₄ ²⁻ = 1:1 and 1:2 influences the morphology and prevailing orientations of the crystallites in the oxalate samples. The presence of such small Mn content in the samples does not change the morphology or size of the crystals. The ZnO and Mn/ZnO oxides with manganese content from 0.51×10⁻² to 15.1×10⁻² Wt % are obtained after thermal decomposition of the oxalates. The oxides preserved the morphology of the precursors. The catalytic tests show that the pure ZnO has a poor activity for CO oxidation reaction. Its doping with Mn promotes the catalytic activity (up from twice to five times) in spite of the very low contents of the dopants. The observed increase of the activity depends on both dopant concentration and Zn²⁺:C₂O₄ ²⁻ ratio, probably due to the different mechanism of the manganese inclusion and different morphology of the oxides. The catalysts of the 1:2 series are more active in CO oxidation reaction.      

Comparison of the electrochemical properties of metallic layered nitrides containing cobalt,nickel and copper in the 1 V–0.02 V potential range

We report the first example of an intercalation compound based on the nitrogen framework in which lithium can be intercalated and deintercalated. A comparison of the structural and electrochemical properties of the ternary lithium cobalt, nickel and copper nitrides is performed. Vacancy layered structures of ternary lithium nitridocobaltates Li_3−2xCo_xN and nitridonickelates Li_3−2xNi_xN with 0.10 ⩽ x ⩽ 0.44 and 0.20 ⩽ x ⩽ 0.60, respectively, are proved to reversibly intercalate Li ions in the 1 V–0.02 V potential range. These host lattices can accommodate up to 0.35 Li ion par mole of nitride. Results herein obtained support Li insertion in vacancies located in Li₂N⁻ layers while interlayer divalent cobalt and nickel cations are reduced to monovalent species. No structural strain is induced by the insertion–extraction electrochemical reaction which explains the high stability of the capacity in both cases. For the Li_1.86Ni_0.57N compound, a stable faradaic yield of 0.30 F/mol, i.e. 130 mAh/g, is maintained at least for 100 cycles. Conversely, the ternary copper nitrides corresponding to the chemical composition Li_3−xCu_xN with 0.10 ⩽ x ⩽ 0.40 do not allow the insertion reaction to take place due to the presence of monovalent copper combined with the lack of vacancies to accommodate Li ions. In the latter case, the discharge of the lithium copper nitrides is not reversible.     

Coordination polymers incorporating copper(II) and manganese(II) centers bridged by pyridinedicarboxylate ligands: Structure and magnetism

Two heterobimetallic coordination polymers, [Cu(2,4-pydc)₂Mn(H₂O)₄]_x (1) and [Cu(2,5-pydc)₂Mn(H₂O)₂]_x · 4xH₂O (2), have been synthesized and structurally characterized by single crystal X-ray diffraction. Both compounds have extended 2-D sheet structures. In 1 the copper centers are linked in chains by double ligand bridges and these chains are cross-linked through the manganese coordination spheres and O–C–O bridges to form polymeric sheets. In 2 separate O–C–O bridged Cu and Mn chains are connected in an alternating array by additional ligand bridging to generate the overall 2-D structure. Analysis of magnetic data of 1 reveals that ferromagnetic exchange between the O–C–O bridged copper and manganese centers dominates the magnetic properties of this system. The magnetic data for 2 fit well to a model incorporating antiferromagnetic exchange in independent S = 1/2 and S = 5/2 linear chains with J(Cu) = −0.073 cm⁻¹ and J(Mn) = −0.32 cm⁻¹. Unlike the situation in 1, there is no evidence for heterometallic exchange. In both 1 and 2 the significant exchange occurs via O–C–O bridges. To study the effect of thermal dehydration on the magnetic properties of these systems, the compounds Cu(2,4-pydc)₂Mn · H₂O (1d) and Cu(2,5-pydc)₂Mn · H₂O (2d) were synthesized and studied.     

Solid state studies on cobalt and copper tungstates nano materials

The cobalt and copper tungstates of the composition Co_1?xCu_xWO₄ (where x = 0.0, 0.3, 0.5, 0.7 and 1.0) were synthesized by co-precipitation method. The compounds were characterized by Thermogravimetric Differential Scanning Calorimeter, X-ray powder diffraction, Infrared spectroscopy, Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) techniques. The Rietveld refinements of X-ray powder diffraction data for the composition Cu_0.5Co_0.5WO₄ reveal the triclinic structure with Pī symmetry. The SEM and TEM studies of the compounds show average particle size in the range of 30–50 nm. The XPS studies confirmed the 2+ oxidation state of the Co and Cu, whereas W exists in 6+ state. The Diffuse reflectance Ultraviolet–visible spectroscopy illustrates band gaps of the compounds ranging from 2.95 to 2.79 eV. The CoWO₄ shows promising photoluminescence result exhibiting strong emission intensity at 468 nm.     

Structure and electrical properties of single-phase cobalt manganese oxide spinels Mn3−xCoxO4 sintered classically and by spark plasma sintering (SPS)

Cobalt manganese oxide spinels Mn_3−xCo_xO₄ (with 0.98?x?3) were prepared by the thermal decomposition in air of oxalate precursors. The influence of the thermal treatments on the structure of these materials is emphasized. Single-phase ceramics were obtained after optimization of the sintering parameters. A precise phase diagram for the Co-Mn-O system is proposed according to thermal stability and structure of oxide powders. The electrical measurements on single-phase ceramics show that low values of resistivity can be achieved. The conduction could take place through jumps of polarons between Mn³⁺ and Mn⁴⁺ on octahedral sites. These compounds present interesting electrical characteristics for negative temperature coefficient (NTC) thermistor applications.     

Solvent-free synthesis of three layered manganese sulfate-oxalates with different pore apertures

Three manganese sulfate-oxalates, namely, H₂pip·Mn₂(SO₄)₂(ox)(H₂O)₂·2H₂O (1), H₃ipa⋅Mn₂(SO₄)(ox)_2.5·H₂O (2), and H₃dpta⋅Mn₂(SO₄)₂(ox)_1.5(H₂O)₃ (3), were prepared under solvent-free conditions, where pip = piperazine, ox = oxalate, ipa = 3,3′-iminobis(N,N-dimethylpropylamine), and dpta = dipropylenetriamine. These compounds have different layered structures intercalated with organic cations. Their pore apertures range from small 8-membered ring (8 MR) to large 12 MR and extra-large 20 MR. The temperature dependence of the magnetic susceptibility of these compounds were also investigated.     

Thermal decomposition of hydrated iron(II) oxalate and manganese(II) oxalate in vacuum

The thermal decomposition of hydrated iron(II) oxalate and manganese(II) oxalate under high vacuum conditions (10^–5 mm Hg) has been studied by differential thermal analysis. The decomposition in vacuum of iron(II) oxalate is exothermic, while that of manganese(II) oxalate is endothermic. An explanation is offered for this behaviour.The financial support by National Bureau of Standards, U.S.A., through a PL-480 scheme is gratefully acknowledged.     

Nanocomposite of manganese ferrocyanide and graphene: A promising cathode material for rechargeable lithium ion batteries

A nanocomposite of potassium manganese ferrocyanide and graphene (12% C, 88% K_1.8Mn_1.1Fe(CN)₆∙ 0.27H₂O) was prepared by ball milling of graphene oxide powder and nanoparticles of manganese–iron Prussian Blue. It exhibits enhanced electrochemical performance compared to pure Prussian Blue with a specific capacity of 150 mAhg^− 1 at average 3.8 V vs. Li⁺/Li and a good cyclability. The nanocomposite can be considered as competitive to standard cathode materials of present rechargeable lithium ion batteries like cobalt oxide, iron phosphate or NMC.     

Structure and properties of the CaFe2O4-type cobalt oxide CaCo2O4

The calcium cobalt oxide CaCo₂O₄ was synthesized for the first time and characterized from a powder X-ray diffraction study, measuring magnetic susceptibility, specific heat, electrical resistivity, and thermoelectric power. CaCo₂O₄ crystallizes in the CaFe₂O₄ (calcium ferrite)-type structure, consisting of an edge- and corner-shared CoO₆ octahedral network. The structure of CaCo₂O₄ belongs to an orthorhombic system (space group: Pnma) with lattice parameters, a=8.789(2) Å, b=2.9006(7) Å and c=10.282(3) Å. Curie-Weiss-like behavior in magnetic susceptibility with the nearly trivalent cobalt low-spin state (Co³⁺, 3d, S=0), semiconductor-like temperature dependence of resistivity (ρ=3×10⁻¹ Ω cm at 380 K) with dominant hopping conduction at low temperature, metallic-temperature-dependent large thermoelectric power (Seebeck coefficient: S=+147 μV/K at 380 K), and Schottky-type specific heat with a small Sommerfeld constant (γ=4.48(7) mJ/Co mol K²), were observed. These results suggest that the compound possesses a metallic electronic state with a small density of states at the Fermi level. The doped holes are localized at low temperatures due to disorder in the crystal. The carriers probably originate from slight off-stoichiometry of the phase. It was also found that S tends to increase even more beyond 380 K. The large S is possibly attributed to residual spin entropy and orbital degeneracy coupled with charges by strong electron correlation in the cobalt oxides.     

Microwave hydrothermal flash synthesis of nanocomposites Fe-Co alloy/cobalt ferrite

The present article presents, for the first time, the last developments reported for an original microwave hydrothermal flash synthesis of Fe-Co alloys (Fe_yCo_1−y)/cobalt ferrite (Fe_3−xCo_xO₄) nanocomposites. Synthesis was performed in alcoholic solutions of ferrous chloride, cobalt chloride and sodium ethoxide (EtONa) using a microwave autoclave (The RAMO system) specially designed by authors. Compared with conventional synthesis, smaller grains (100 nm compared to 1 μm) can be produced in a short period (e.g. 10 s) using a less basic medium. In all the cases, the microstructure and the amount of metal inside the composite particles are very different from the product obtained via a classical route. Indeed, 20% of metal was routinely obtained using the microwave flash synthesis. Nevertheless, this mean of production is more efficient and much faster than the ones commonly used to produce this type of nanocomposites.     

氧化钴和氮掺杂碳纳米管纳米复合物的催化与容量性质(英文)

The nanocomposites based on cobalt oxide and nitrogen-doped carbon nanofibers (N-CNFs) with cobalt oxide contents of 10–90 wt% were examined as catalysts in the CO oxidation and supercapacity electrodes. Depending on Со3О4 content, such nanocomposites have different morphologies of cobalt oxide nanoparticles, distributions over the bulk, and ratios of Со3+/Co2+ cations. The 90%Со3О4-N-CNFs nanocomposite showed the best activity because of the increased concentration of defects in N-CNFs. The capacitance of electrodes containing 10%Со3О4-N-CNFs was 95 F/g, which is 1.7 times higher than electrodes made from N-CNFs.