Quenching effect of some heavy metal ions on the fast peroxyoxalate-chemiluminescence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane as a novel fluorophore

The fast chemiluminescence (CL) arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane (L) as a novel fluorophore, and imidazole as catalyst, has been studied in ethyl acetate solution. The relationships between the chemiluminescence intensity and concentrations of TCPO, imidazole, hydrogen peroxide and L are reported. In the presence of imidazole as catalyst, the entire CL signal was completed in less than 3 s. The quenching effect of Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺ and Ag⁺ ions on the chemiluminescent system was investigated, the resulting Stern–Volmer plots were obtained and the K_Q values were calculated. It was found that the quenching effect of metal ions on the chemiluminescence of L decreases in the order Cu²⁺ > Pb²⁺ > Cd²⁺ > Hg²⁺ > Ag⁺.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

A selective fluorogenic chemodosimeter for Hg based on the dimerization of desulfurized product

A simple Hg²⁺-selective chemodosimetric system based on thiosemicarbazone was investigated. The transformation of thiosemicarbazone into semicarbazone selectively exerted by Hg²⁺ ions and the dimerization of semicarbazone resulted in a pronounced OFF–ON-type fluorescent signaling behavior. The coexistent metal ions, such as Fe³⁺, Ca²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, Mg²⁺, Na⁺, K⁺, and Fe²⁺, had no obvious interference with the detection of Hg²⁺. In addition, S₁₂–Hg²⁺ plays a high sensitivity for basic anions to form an ‘OFF–ON–OFF’ type signaling behavior, with the Hg²⁺-induced emission spectra can be quenched. Moreover, test strips based on S₁₂ exhibited a good selectivity to Hg²⁺. We believe the test strips could act as a convenient and efficient Hg²⁺ test kit.     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Improved sensitivity for some [corrected] metal ions by use of sulfide in the Belousov-Zhabotinskii oscillating reaction

A highly sensitive method for the determination of trace amounts of transition metal ions by use of sulfide in the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction is proposed. The use of sulfide increased strongly the sensitivity of the B-Z reaction for transition metal ions, such as Ag⁺, Pb²⁺, Hg²⁺, Cd²⁺, Cu²⁺,and Bi³⁺. Results showed that the variational ratio of oscillating period (P_R) is linearly proportional to the negative logarithm of concentration of metal ions. The detection limit is down to 10⁻¹² mol L⁻¹. Various influencing factors on the determination were also examined.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Fluorescence detection of mercury(II) and lead(II) ions using aptamer/reporter conjugates

We have developed a fluorescence technique for the detection of Hg²⁺ and Pb²⁺ ions using polythymine (T₃₃)/benzothiazolium-4-quinolinium dimer derivative (TOTO-3) and polyguanine (G₃₃)/terbium ions (Tb³⁺) conjugates, respectively. Hg²⁺ ions induce T₃₃ to form folded structures, leading to increased fluorescence of the T₃₃/TOTO-3 conjugates. Because Pb²⁺ ions compete with Tb³⁺ ions to form complexes with G₃₃, the extent of formation of the G₃₃-Tb³⁺ complexes decreases upon increasing the Pb²⁺ concentration, leading to decreased fluorescence at 545 nm when excited at 290 nm. To minimize interference from Hg²⁺ ions during the detection of Pb²⁺ ions, we conducted two-step fluorescence measurements; prior to addition of the G₃₃/Tb³⁺ probe, we recorded the fluorescence of a mixture of the T₃₃/TOTO-3 conjugates and Hg²⁺ ions. The fluorescence signal obtained was linear with respect to the Hg²⁺ concentration over the range 25.0-500 nM (R² = 0.99); for Pb²⁺ ions, it was linear over the range 3.0-50 nM (R² = 0.98). The limits of detection (at a signal-to-noise ratio of 3) for Hg²⁺ and Pb²⁺ ions were 10.0 and 1.0 nM, respectively. Relative to other techniques for the detection of Hg²⁺ and Pb²⁺ ions in soil and water samples, our present approach is simpler, faster, and more cost-effective.     

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

A Simple and Highly Sensitive Electrochemically Reduced p‐Nitrobenzoic Acid Film Modified Sensor for Determination of Mercury

Herein, a simple electrochemical sensor was fabricated for sensing Hg²⁺ ions by using electrochemically reduced p‐nitrobenzoic acid molecules modified (ERpNBA) glassy carbon electrode (GCE). The modified electrode was applied for the determination of Hg²⁺ ions by using differential pulse anodic stripping voltammetry (DPASV). Experimental parameters such as concentration of p‐nitrobenzoic acid used for electrode modification, pH, accumulation time and deposition potential used for the determination of Hg²⁺ ions were optimized. The strong interaction between the Hg²⁺ ions and the lone pair of electrons on the nitrogen atoms of ERpNBA molecules leads to highly selective adsorption of Hg²⁺ ions on the modified electrode. Under the optimum experimental conditions, the sensor showed higher sensitivity and very low detection limit for Hg²⁺ ions than other metal ions such as Cd²⁺, Pb²⁺ and Zn²⁺ ions. The LOD for Hg²⁺ ions was 240 pM which is below the guideline value given by the World Health Organization and the earlier reports.     

Adsorption applications of synthetically prepared PANI-CuO based nanocomposite material

In this work, we have used a polyaniline and cupric oxide-based nanocomposite material (PANI-CuO) for the adsorption of Pb²⁺, Cd²⁺, and Cr⁶⁺ ions from contaminated water. FTIR, FESEM, EDX and XRD methods were used in the characterisation of PANI-CuO. The maximum percentage removal of Pb²⁺, Cd²⁺, and Cr⁶⁺ ions was found to be 79.9%, 78.9% and 82.1% at 1 g of PANI-CuO for 100 mL of contaminated water. The suitability order of the isotherm model was observed as Langmuir > Freundlich > Elovich, whereas the pseudo first order model was best fitted as compared to the pseudo second order model. The rate constants were evaluated as 1.441, 1.801 and 1.661 g mg^?1 min ^?1, respectively. The values of ΔG⁰ were calculated to be ?287.4, ?849.6, and ?728.9 kJ mol^?1 for Pb²⁺, Cd²⁺ and Cr⁶⁺ ions, respectively.     

Calix[4]Resorcinarene Macrocycles Interactions with Cd2+, Hg2+, Pb2+, and Cu2+ Cations: A QCM‐I and Langmuir Ultra‐thin Monolayers Study

Stable ultra‐thin Langmuir monolayers of calix[4]resorcinarene derivatives, namely: C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(R+)‐α‐methylbenzylamine (Ionophore I ), and C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(S‐)‐α‐methylbenzylamine (Ionophore II ), were prepared at the air‐water interface. Their interactions with a series of heavy metals (HM) ions (Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) present in the aqueous subphase were investigated by measuring surface pressure‐area isotherms, at different concentrations. The surface pressure‐area (Π‐A) isotherms were stable and demonstrated the HM amounts influence on the limiting area (A_lim) values, therefore confirming the examined macrocycles capability to host the metallic toxicants. Additionally, a HM concentration dependence was realized and interpreted by a selective tendency of both ionophores towards Cu²⁺ and Cd²⁺ ions over Pb²⁺ and Hg²⁺, especially at high concentrations. The HM ions interactions with the applied calix[4]resorcinarene Langmuir ultra‐thin monolayers were interpreted based on the Gibbs‐Shishkovsky adsorption equation. Moreover, quartz crystal microbalance with impedance measurement (QCM‐I), was applied for the detection of HM ions in solutions. The QCM‐I results showed the effectiveness of the coated QCM‐I crystals in detecting the ions at different concentrations. The detection limit values were in the order of 0.16, 0.3, 0.65, 1.1 ppm (Ionophore I), as well 0.11, 0.45, 0.2, 0.89 (Ionophore II) for the Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ cations, respectively. Additionally, a selective tendency of both ionophores towards copper ions was shown.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

Nanostructured magnesium silicate hollow spheres, one kind of non-conductive nanomaterials, were used in heavy metal ions (HMIs) detection with enhanced performance for the first time. The detailed study of the enhancing electrochemical response in stripping voltammetry for simultaneous detection of ultratrace Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ was described. Electrochemical properties of modified electrodes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The operational parameters which have influence on the deposition and stripping of metal ions, such as supporting electrolytes, pH value, and deposition time were carefully studied. The anodic stripping voltammetric performance toward HMIs was evaluated using square wave anodic stripping voltammetry (SWASV) analysis. The detection limits achieved (0.186 nM, 0.247 nM, 0.169 nM and 0.375 nM for Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺) are much lower than the guideline values in drinking water given by the World Health Organization (WHO). In addition, the interference and stability of the modified electrode were also investigated under the optimized conditions. An interesting phenomenon of mutual interference between different metal ions was observed. Most importantly, the sensitivity of Pb²⁺ increased in the presence of certain concentrations of other metal ions, such as Cd²⁺, Cu²⁺ and Hg²⁺ both individually and simultaneously. The proposed electrochemical sensing method is thus expected to open new opportunities to broaden the use of SWASV in analysis for detecting HMIs in the environment.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Cysteine functionalized poly(hydroxyethyl methacrylate) monolith for heavy metal removal

The aim of this study was to investigate the performance of monoliths composed of hydroxyethyl methacrylate (HEMA) to which N-methacryloyl-(L)-cysteine methyl ester (MAC) was polymerized for removal of heavy metal ions. Poly(HEMA-MAC) monolith was produced by bulk polymerization. Poly(HEMA-MAC) monolith was characterized by FTIR and scanning electron microscopy (SEM). The poly(HEMA-MAC) monolith with a swelling ratio of 89%, and containing 69.4 μmol MAC/g were used in the adsorption studies. Adsorption capacity of the monolith for the metal ions, i.e., Cu²⁺, Cd²⁺, Zn²⁺, Hg²⁺, and Pb²⁺ were investigated in aqueous media containing different amounts of the ions (10–750 mg/L) and at different pH values (3.0–7.0). The maximum adsorption capacities of the poly(HEMA-MAC) monolith were 68.2 mg/g for Zn²⁺, 129.2 mg/g for Cu²⁺, 245.8 mg/g for Pb²⁺, 270.2 mg/g for Hg²⁺, and 284.0 mg/g for Cd²⁺. pH significantly affected the adsorption capacity of MAC incorporated monolith. The competitive adsorption capacities were 587 μmol/g for Zn²⁺, 1646 μmol/g for Cu²⁺, 687 μmol/g for Pb²⁺, 929 μmol/g for Hg²⁺, and 1993 μmol/g for Cd²⁺. The chelating monolith exhibited the following metal ion affinity sequence on molar basis: Cd²⁺ > Cu²⁺ > Hg²⁺ > Pb²⁺ > Zn²⁺. The formation constants of MAC–metal ion complexes have been investigated applying the method of Ruzic. The calculated values of stability constants were 5.28 × 10⁴ L/mol for Cd²⁺, 4.16 × 10⁴ L/mol for Cu²⁺, 2.27 × 10⁴ L/mol for Hg²⁺, 1.98 × 10⁴ L/mol for Pb²⁺, and 1.25 × 10⁴ L/mol for Zn²⁺. Stability constants were increased with increasing binding affinity. The chelating monoliths can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. These features make poly(HEMA-MAC) monolith a potential adsorbent for heavy metal removal.     

A sinapic acid–calix[4]arene hybrid selectively binds Pb over Hg and Cd

The binding affinity for Pb²⁺, Cd²⁺ and Hg²⁺ of the sinapic acid–calix[4]arene hybrid 2, having four sinapyl pendants at the upper rim, has been investigated via an UV–Vis study. Compound 2 has better complexing ability than the monomeric p-phenetidine derivative 1. This highlights that the clustering of sinapyl units in a basket-like structure, dictated by the calixarene scaffold, greatly enhances the complexing properties. Ligand 2 forms complexes even with Hg²⁺, which is not complexed by 1 at all; the complexes formed by 2 with Pb²⁺ and Cd²⁺ are much stronger than the analogous complexes formed by 1. The UV–Vis investigation shows that the hybrid 2 markedly favors Pb²⁺ over Cd²⁺ and Hg²⁺. Information on the structural properties of the complex species was obtained by ¹H NMR spectroscopy. NMR data show that all three metal ions are placed into the cavity consisting of the calixarene scaffold and the sinapyl pendants, though their binding affects the coordinating regions to a different extent.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.