Synthesis and characterization of a series of chiral NHC–Pd complexes derived from l-phenylalanine

The synthesis of a series of chiral Pd(L)PyBr₂ (3a–3e) and Pd(L)PyCl₂ (4d and 4e) complexes from l-phenylalanine is presented (L = (S)-3-allyl-4-benzyl-1-(2,6-diisopropylphenyl)-imidazolin-2-ylidene (a), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-2-ylmethyl)imidazolin-2-ylidene (b), (S)-4-benzyl-3-(biphenyl-4-ylmethyl)-1-(2,6-diisopropylphenyl)imidazolin-2-ylidene (c), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-1-ylmethyl)imidazolin-2-ylidene (d) or (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(2,4,6-trimethylbenzyl)imidazolin-2-ylidene (e). The complexes were characterized by physicochemical and spectroscopic methods, and the X-ray crystal structures of 3a–3c and 4d are reported. In each case, there is a slightly distorted square-planar geometry around palladium, which is surrounded by imidazolylidene, two trans halide ligands and a pyridine ligand. There are π–π stacking interactions in the crystal structures of these complexes. Complex 3a showed good catalytic activity in the Cu-free Sonogashira coupling reaction under aerobic conditions.     

Aluminum hydrides with radical-anionic and dianionic acenaphthene-1,2-diimine ligands

The reaction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-bian) with LiAlH₄ affords two products regardless of the solvent used (tetrahydrofuran or diethyl ether). These products were isolated as green and colorless crystals. Green crystals of the complex [(dpp-bian)Al(H)₂Li(THF)₃] (1) were obtained from tetrahydrofuran; colorless crystals of the complex [{dpp-bian(H₂)}Al(H)₂Li(Et₂O)₂] (2), from diethyl ether. The reactions of compound 1 with 2,6-di-tert-butyl-4-methylphenol and benzophenone gave monohydrides [(dpp-bian)Al(H)(OC₆H₂-2,6-Bu₂ ^t-4-Me)][Li(THF)₄] (3) and [(dpp-bian)Al(H)(OCHPh₂)- Li(THF)₂] (4), respectively. The diamagnetic aluminum hydride [(dpp-bian)AlH(THF)] (5) was synthesized by the reaction of dichloroalane HAlCl₂ (in situ) with the disodium salt of dpp-bian in THF; the paramagnetic hydride [(dpp-bian)AlH(Cl)] (6) containing the dpp-bian radical anion was synthesized by the reaction of the monosodium salt (dpp-bian)Na with monochloroalane H₂AlCl (in situ) in diethyl ether. The reaction of compound 6 with tert-butyllithium gives the complex [(dpp-bian)AlBu^t(Et₂O)] (7). Diamagnetic derivatives 1—5 and 7 were characterized by ¹Н NMR spectroscopy; paramagnetic compound 6, by ESR spectroscopy. The molecular structures of compounds 1—7 were determined by single-crystal X-ray diffraction.     

Hydroamination of alkynes with aromatic amines catalyzed by digallane (dpp-bian)Ga—Ga(dpp-bian)

Digallane (dpp-bian)Ga—Ga(dpp-bian) (1) (dpp-bian is the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) catalyzes the addition of 4-chloroaniline to some terminal alkynes RC≡CH (R = Buⁿ, Ph, 4-MeC₆H₄). The reaction orders in each of the substrates were found for the reaction of phenylacetylene with 4-chloroaniline catalyzed by compound 1. The reaction of compound 1 with phenylacetylene in a molar ratio of 1: 10 led to 1-[N-(2,6-diisopropylphenyl)imino]-2-(1-phenylethylidene)acenaphthene (5) and the compound [C₁₂H₆(NC₆H₃Pr₂ ⁱ)(PhC=CH₂)(PhC=CH)]Ga(C≡CPh)₂ (6). The reaction of digallane 1 with phenylacetylene and aniline in a stoichiometric ratio of 1: 2: 2 gave bis-anilide (dpp-bian)-Ga[N(H)Ph]₂ (7) in 40% yield. The compound (PhC≡C)₃Ga·THF (9) was obtained by the reaction of three equivalents of sodium phenylacetylide (prepared in situ from phenylacetylene and sodium) with one equivalent of GaCl₃ in tetrahydrofuran. Compounds 5—7 and 9 were characterized by IR spectroscopy, ¹H NMR spectroscopy was used to characterize products 5, 6, and 9, whereas EPR spectroscopy was used for amide 7. The structures of compounds 5—7 and 9 were determined by single crystal X-ray diffraction analysis.     

1,3,2-Diazasilols based on 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene

Reduction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (1, dpp-bian) in the presence of SiCl₄ with two equivalents of potassium graphite (KC₈) in tetrahydrofuran leads to the formation of compound (dpp-bian)SiCl₂ (2), which was also synthesized by the exchange reaction of SiCl₄ with the magnesium complex (dpp-bian)Mg(THF)₃. An analog of compound 2, the bromo derivative (dpp-bian)SiBr₂ (3), was obtained by the reaction of SiBr4 with one equivalent of Na2(dpp-bian) (in situ from Na and dpp-bian) in toluene. The silylene (dpp-bian)Si (4) was synthesized by the reduction of a mixture of dpp-bian and SiCl₄ (1: 1) with four equivalents of potassium graphite in tetrahydrofuran. Treatment of compound 4 with diimine 1 gives the derivative (dpp-bian)₂Si (5). Compounds 2–5 were characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopy, as well as by elemental analysis, their molecular structure was established by X-ray diffraction studies.     

Addition of phenylacetylene and camphor to the complex [(dpp-bian)Eu(dme)<Subscript>2</Subscript>] (dpp-bian is the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene dianion)

The reduction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-bian) with an excess of europium metal in 1,2-dimethoxyethane (dme) produces a divalent europium complex with the dpp-bian dianion, [(dpp-bian)Eu(dme)₂] (1). The reactions of 1 with phenyl-acetylene and camphor proceed via protonation of the diimine ligand to form the monomeric amido-amino complexes of divalent europium — [H(dpp-bian)Eu(C≡CPh)(dme)₂] (2) and [H(dpp-bian)Eu(camphor)(dme)₂] (3), respectively. Compounds 2 and 3 were characterized by IR spectroscopy and elemental analysis. Their molecular structures were determined by X-ray diffraction. Compounds 2 and 3 were shown to be monomeric seven-coordinate europium(ii) complexes with terminal phenylethynyl and enol ligands, respectively. According to the IR spectroscopic data, the terminal ligands in complexes 2 and 3 undergo tautomerization involving backward proton transfer from the amido-amino ligand to the substrate. The magnetic moment of compound 2 (8.03 μB) remains constant in the temperature range of 4—300 К and confirms the presence of divalent europium.     

Telomerization and dimerization of isoprene by in situ generated palladium-carbene catalysts

The palladium-catalyzed telomerization of isoprene with methanol and dimerization of isoprene have been studied in presence of in situ generated palladium-carbene catalysts. Unprecedented catalyst productivity has been observed for these two reactions. A selectivity switch from the telomer to the dimer product occurred by using different substituted carbene ligands. Among the imidazolium salts tested 1,3-dimesitylimidazolium mesylate (1), 1,3-dimesityl-4,5-dihydroimidazolium chloride (3) gave the best yields for telomerization reaction whereas 1,3-bis-(2,6-diisopropylphenyl)-4,5-dihydroimidazolium tetrafluoroborate (5) and 1,3-bis-(2,6-diisopropylphenyl)-4,5-dimethyl-4,5-dihydroimidazolium chloride (9) form dimers in high yield and good selectivity.     

Two palladium(II) complexes based on Schiff base ligands: synthesis, characterization, luminescence, and catalytic activity

Two Pd(II) complexes involving Schiff base ligands, namely, [Pd(L1)₂] (1), [Pd₂(L₂)Cl₂] (2) [HL1 = 2-((2,6-diisopropylphenylimino)methyl)-4,6-dibromophenol, L2 = N-(4-isopropylbenzylidene)-2,6-diisopropylbenzenamine] have been synthesized using solvothermal methods and characterized by elemental analysis, IR-spectroscopy, thermogravimetric analysis, powder X-ray diffraction, UV–vis absorption spectra, and single-crystal X-ray diffraction. Complex 1 is a mononuclear cyclometalated Pd(II) complex, whereas complex 2 is a μ-chloro-bridged dinuclear. Both 1 and 2 display photoluminescence in the solid state at 298 K and possess fluorescence lifetimes (τ ₁ = 86.40 ns, τ ₂ = 196.21 ns, τ ₃ = 1,923.31 ns at 768 nm for 1, τ ₁ = 69.92 ns, τ ₂ = 136.40 ns, τ ₃ = 1,714.26 ns at 570 nm for 2). The Suzuki reactions of 4-bromotoluene with phenylboronic acid by complexes 1–2 have also been studied.     

Synthesis and structure of bischelate gallium complexes (dpp-bian)Ga(acac) and (dpp-bian)Ga(2,2´-bipy) (dpp-bian is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene)

A reaction of digallane [(dpp-bian)Ga—Ga(dpp-bian)] (1) (dpp-bian is the 1,2-bis[(2,6-disopropylphenyl)imino]acenaphthene) with one equivalent of I₂ leads to oxidation of (dpp-bian)^2– in compound 1 to (dpp-bian)–and gives [(dpp-bian)GaI—GaI(dpp-bian)] (2). In the reaction of compound 2 with two equivalents of (acac)Na, not only exchange of the iodide and acetylacetonate ions takes place, but also a transfer of electrons from the metal—metal bond to dpp-bian with the formation of the complex [(dpp-bian)Ga(acac)] (3), in which the dpp-bian ligand is a dianion. A reaction of digallane 1 with 2,2´-bipyridyl at 200 °C in toluene in a sealed tube leads to the reduction of 2,2´-bipyridyl and gives the complex [(dpp-bian)Ga(bipy)] (4), which contains two different chelate redox-active ligands. The new compounds were characterized by IR (3, 4), NMR (3), and ESR spectra (4), the structures of both derivatives were established by X-ray diffraction.     

Structure and reactivity of mono- and dinuclear diiminate zinc alkyl complexes

The synthesis, structure and reactivity of several diiminate ligands are presented. The syntheses of five representative β-diiminate (BDI) zinc alkyl complexes and one β-oxo-δ-diiminate (BODDI) zinc alkyl are described. BDI ligands with varying backbone and N-aryl substituents display different solid state structures. [(BDI)ZnR] are synthesized by the reaction of (BDI)H with ZnR₂ in quantitative yield. Previously reported (BDI-1)ZnEt is a three-coordinate monomer in the solid state whereas [(BDI-3)ZnEt]_∞ [(BDI-3)=2-((2,6-diisopropylphenyl)amido)-3-cyano-4-((2,6-diisopropylphenyl)imino-2-pentene] and [(BDI-4)ZnEt]_∞ [(BDI-4)=2-((2,6-diethylphenyl)amido)-3-cyano-4-((2,6-diethylphenyl)imino-2-pentene] form one dimensional coordination polymers. The bimetallic complex [(BODDI-1)(ZnEt)₂] [(BODDI-1)=2,6-bis((2,6-diisopropylphenyl)amido)-2,5-heptadien-4-one] is prepared through the reaction of (BODDI-1)H₂ with two equivalents ZnEt₂. Both [(BDI)ZnEt] and [(BODDI)ZnEt] complexes react with acetic acid to give the acetate complexes in moderate to high yields, offering a superior synthetic route to these complexes. [(BDI)ZnR] [BDI=(BDI-3) or 1,1,1-trifluoro-2-((2,6-diisopropylphenyl)amido)-4-((2,6-diethylphenyl)imino-2-pentene), (BDI-5)] complexes react with MeOH to produce [{(BDI)Zn(μ-OMe)}₂Zn(μ-OMe)₂] in moderate yields. The molecular structures of [(BDI-3)ZnEt], [(BDI-4)ZnEt], [(BODDI-1)(ZnEt)₂], [(BODDI-1)Zn₂(μ-OAc)₂], [{(BDI-3)Zn(μ-OMe)}₂Zn(μ-OMe)₂] and [{(BDI-5)Zn(μ-OMe)}₂Zn(μ-OMe)₂] have been determined by X-ray diffraction.     

A zwitterionic nickel-olefin initiator for the preparation of high molecular weight polyethylene

The reaction of the sodium 3-(2,6-diisopropylphenylimino)-but-1-en-2-olato with Ni(PMe₃)₂(η¹-CH₂C₆H₅)Cl provides 3-(2,6-diisopropylphenylimino)-but-1-en-2-olato(η¹-benzyl)(trimethylphosphine) nickel (1), which was structurally characterized. The addition of 2 equiv. of B(C₆F₅)₃ to 1 results in the formation of 2-tris(pentafluorophenyl)borate-3-(2,6-diisopropylphenylimino)-but-1-ene(η³-benzyl)nickel (2), in which the borane coordinates to the O site of the ligand and forces binding of the olefin unit to the nickel center. The solid-state structure of 2 shows a zwitterionic structure with substantial positive charge at the nickel center. Compound 2 can be used to initiate the homopolymerization of ethylene to yield high molecular weight polyethylene.     

Transition metal 1,3,2-diazagallol derivatives

Reduction of digallane (dpp-bian)Ga—Ga(dpp-bian) (1) (dpp-bian is the 1,2-bis[(2,6-di-isopropylphenyl)imino]acenaphthene dianion) with metallic sodium in THF leads to the formation of gallylsodium (dpp-bian)Ga—Na(thf)₄ (2). Reduction of digallane 1 with dicyclopentadienyltetracarbonyldiiron, vanadocene, and nickelocene furnishes the corresponding gallyl complexes (dpp-bian)Ga—FeCp(CO)₂ (3), (dpp-bian)Ga—VCp₂ (4) and [(dpp-bian)Ga]₂NiCp (5). The reaction of 1 with Cp₂Mn gives a gallium-free complex (dpp-bian)MnCp(dme) (6). Carbonylates [{(dpp-bian)Ga—M(CO)₅}{Na(thf)₂}]₂ (M = Cr (7), W (8)) and [{(dppbian)Ga}₂FeCp(CO)][Na(dme)₃] (9) were obtained by the reaction of carbonyls Cr(CO)₆, W(CO)₆, and [CpFe(CO)₂]₂ with compound 2. Diamagnetic derivatives 3, 7, 8, and 9 were characterized by ¹H NMR spectra. The structures of products 3—9 were established by single crystal X-ray diffraction.     

Trialkylantimony(V) o-amidophenolates: Electrochemical transformations and antiradical activity

The electrochemical transformations and antiradical activity of trialkylantimony(V) o-amidophenolate derivatives, (AP)SbR₃ (AP = 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-amidophenolate); R = CH₃ (I), C₂H₅ (II), and C₆H₁₁ (III), are studied. The electrochemical oxidation of compounds I–III proceeds successively to form mono- and dicationic forms of the complexes. The presence of the donor hydrocarbon groups at the antimony(V) atom shifts the oxidation potentials to the cathodic range and decreases the stability of the monocationic complexes formed in electrochemical oxidation. The second anodic process is irreversible and accompanied by o-iminoquinone decoordination. The antiradical activity of compounds I–III is studied in the reaction with the diphenylpicrylhydrazyl radical and oleic acid autooxidation. The values obtained for indices EC₅₀ and IC₅₀ indicate the antiradical activity of the studied compounds. Complexes I–III were found to be the efficient inhibitors of oleic acid oxidation and act as efficient destructors of hydroperoxides.     

Novel layered calcosilicate-immobilized iron-based diimine catalyst for ethylene polymerization

A novel layered calcosilicate (CAS-1) was employed to immobilize an iron-based diimine catalyst 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine iron chloride (I) onto it to form a supported catalyst (CC) for the first time. The crystal structure of CAS-1 was determined by X-ray crystallographic analysis in addition to SEM characterization. The CC-catalyzed ethylene polymerization exhibited good catalytic activities with either co-catalyst methylaluminoxane (MAO) or triethylaluminum (TEA). The resulting polyethylenes possessed not only higher molecular weight, melting temperature (T_m), and decomposition onset temperature (T_onset) than those obtained with its homogeneous counterpart, but also a unique morphology.     

N-heterocyclic carbene coordinated gallanes and chlorogallanes

The preparation of the N-heterocyclic carbene coordinated gallium complexes [GaH₃(IXy)] (1), [GaH₃(IDipp)] (2), [GaClH₂(IMes)] (3) and [GaCl₂H(IMes)] (4), where IXy = 1,3-bis(2,6-dimethylphenyl)imidazol-2-ylidene, IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene and IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene, are reported. All four complexes have been characterised by ¹H, ¹³C NMR and IR spectroscopy and, for complexes 2, 3 and 4, single crystal X-ray structure determination. These compounds represent some of the most thermally stable molecular gallium hydrides known, with 4 being the most thermally stable gallium hydride reported (dec. 274 °C). These remarkable thermal stabilities translate to significant aerobic stability such that all four compounds may be handled in dry air without significant decomposition. Compounds 2, 3 and 4 exist as distorted tetrahedra in the solid state with gallium to carbene C-donor bonds that shorten with increasing Lewis acidity of the gallium centre. Compound 2 co-crystallizes with 1 equiv. of 2,6-diisopropylphenylaniline and exhibits several weak intermolecular bonding interactions in the solid-state.     

A new dirhodium tetraacetate carbenoid: Synthesis, crystal structure and catalytic application

A new dirhodium tetraacetate II involving 1,3-bis(2,6-diisopropylphenyl)-imidazol-2-ylidene I was synthesized and characterized by general spectroscopic tools in the solution state as well as single X-ray crystallographic analysis in the solid state. The catalytic activity of dirhodium tetraacetate carbenoid II was tested for the allylic oxidation, and the improved reactivity to the allylic oxidation was observed compared to that of Rh₂(OAc)₄. The different electrochemical properties of dirhodium tetraacetate carbenoid II and Rh₂(OAc)₄ were compared via cyclic voltammetry.     

Stereochemie und1H-NMR-Spektren einiger Spiro-1,3-Dioxane

Mono and dispiro-1,3-dioxanes (1–3) were synthesized by the condensation of 1,2-, 1,3- and 1,4-cyclohexanedione, respectively (4–6) with bis-(hydroxymethyl)-malonic ester (7). The¹H-NMR spectra prove for the mono- (2) and dispiro-1,3-dioxane (3) the existence of conformational equilibria and for the monospiro-1,3-dioxane (1) a “fixed” structure. C₆D₆ causes a remarkable solvent shift effect in the NMR spectra separating a superposed complex coupling pattern (in CDCl₃) in two well resolved AB doublets and two AX quartets. TheE-oxime of the monospiro-1,3-dioxanone (1) represents also a “fixed” structure. Bis-(hydroxymethyl)-malonic ester (7) is a formaldehyde generating agent in the condensation reaction of dimedone with the diol7.     

Syntheses,structures, and solid-state phosphorescence characteristics of <Emphasis Type="Italic">trans</Emphasis>-bis(salicylaldiminato)Pt(II) complexes bearing perpendicular <Emphasis Type="Italic">N</Emphasis>-aryl functionalities

The syntheses, structures, and solid-state emission characteristics of trans-bis(salicylaldiminato)Pt(II) complexes bearing N-aromatic functionalities are described herein. A series of Pt complexes bearing various N-phenyl (1) and N-(1-naphthyl) (2) groups on the salicylaldiminato ligands were prepared by reacting PtCl₂(CH₃CN)₂ with the corresponding N-salicylidene aromatic amines, and the trans-coordination and crystal packing of these complexes were unequivocally established based on X-ray diffraction (XRD). Complexes with 2,6-dimethylphenyl (1c), 2,6-diisopropylphenyl (1d), 1-naphthyl (2a), and 1-(2-methylnaphthyl) (2b) groups on the N atoms exhibited intense phosphorescent emission at ambient temperature in the crystalline state, while those with phenyl (1a), 2,6-dibromophenyl (1b), and 2,6-bis(N,N-dimethylamino)phenyl (1e) functionalities were either less emissive or non-emissive under the same conditions. XRD analyses identified significant intramolecular interactions between Pt and H atoms of the N-aryl functionalities in the emissive crystals of 1c, 1d, and 2a. These interactions were evidently an important factor associated with intense emission at ambient temperature.     

Chemie des 5,7-Dihydroxy-2H-thiopyrano[2,3-b]pyridin-4(3H)-ons

Hydrolysis of the 4-alkyliminothiopyrano[2,3-b]pyridinedioles (5) and 4-alkylaminothiopyrano[2,3-b]pyridones (6) resp. with 10% NaOH gives 5,7-dihydroxy-2H-thiopyrano[2,3-b]pyridine-4(3H)-one (7).7 can be obtained in better yield by reaction of 4-dimethylamino-2(1H)-pyridinethione (8) with bistrichlorphenylethylamlonate (2). Aminolysis of7 affords the two isomeric products5 and6. On treatment with hydrazines,7 reacts only to 4-hydrazonoderivatives5. By heating in bromobenzene5d is cyclisized to 1H-5,1,2,6-thiatriaza-acenaphthylen-7-ol (11). On methylation with methyljodide5,6 and7 furnish the 7-methoxyproducts13,14 and12. By heating in 20% NaOH7 is transformed into the 2-thioxo-3-pyridylmethylketone16 A and its tautomer, 2-mercapto-3-pyridylmethylketone16 B. The structures of5,6 and7 are discussed.     

Semiempirical calculation on photochromic process of spirooxazines

Structure effect on photochromic mechanism of 1,3-dimethyl-3,2′-(1,3-propyl-ene)spiro-[indoline-2,3′-[3H]naphtho[2,1-b][1,4]oxazine] (SP1) and 1,2′-(1,3-propylene)-3,3-dimethylspiro[indoline-2,3′[3H]naphtho[2,1-b]-[1,4]oxazine] (SP2) has been studied by AM1 calculation. The colored forms of SP1 and SP2 were fully optimized by AM1 method, and the results support the keto structures. The calculation results on stability of colored forms are agreeable with published experimental results.     

Synthesis, characterization, and antimicrobial activity of a novel proton salt and its Cu(II) complex

A novel proton transfer compound (H₂Ppz)(HDipic)₂ (I) obtained from 2-(piperazin-1-yl)ethanol (Ppz) and pyridine-2,6-dicarboxylic acid (H₂Dipic) and its Cu(II) complex (H₂Ppz)[Cu(Dipic)₂] · 6H₂O (II) have been prepared and characterized by elemental, spectral (¹H and ¹³C NMR, IR and Uv-Vis) and thermal analyses. Magnetic measurement and single crystal X-ray diffraction methods have also been applied for compound II. The molecular structure of II consists of one 1-(2-hydroxyethyl)piperazine-1,4-diium cation, one bis(pyridinium-2,6-dicarboxylate)Cu(II) anion and six uncoordinated water molecules. In complex II, the copper ion coordinates to two oxygen and one nitrogen atoms of two pyridine-2,6-dicarboxylate molecules forming an octahedral conformation. Furthermore, the synthesised compounds (I and II) were screened for their antimicrobial activities against Gram (?) (Escherichia coli and Pseudomonas aeruginosa) and Gram (+) (Staphylococcusaureus and Bacillus cereus). The results were reported, discussed and compared with the corresponding starting materials (H₂Dipic and Ppz).