Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

Assembly of a Highly Stable Luminescent Zn5 Cluster and Application to Bio‐Imaging

The assembly sequence of the coordination cluster [Zn₅(H₂Lⁿ)₆](NO₃)₄]⋅8 H₂O⋅2 CH₃OH ( Zn₅ , H₃Lⁿ=(1,2‐bis(benzo[d]imidazol‐2‐yl)‐ethenol) involves in situ dehydration of 1,2‐bis(benzo[d]imidazol‐2‐yl)‐1,2‐ethanediol (H₄L) through the formation of the [Zn(H₃L)₂]⁺ monomer, dimerization to [Zn₂(H₃L)₂]⁺, dehydration of the ligand to [Zn₂(H₂Lⁿ)₂]⁺, and the final formation of the pentanuclear cluster. The cluster has the following special characteristics: 1) high stability in both refluxing 37 % HCl and 27 % NH₃, 2) low cytotoxicity, and 3) pH‐sensitive fluorescence in the visible‐to‐near‐infrared (Vis/NIR) region in the solid state and in solution. We have applied it as a fluorescent probe both in vivo and in vitro. Its H‐bonding ability is the key to its affinity and selectivity for imaging lysosomes in HeLa cells and tumors in male BALB/C mice. It provides a new type of sensitive and biocompatible fluorescent probe for detecting small tumors (13.5 mm³).     

Supramolecular Coordination Cages Based on N-Heterocyclic Carbene-Gold(I) Ligands and Their Precursors: Self-Assembly,Structural Transformation and Guest-Binding Properties

The incorporation of functional groups into the cavity of discrete supramolecular coordination cages (SCCs) will bring unique functions and applications. Here, three dicarboxylate ligands (H₂ L1 Cl, H₂ L2 Cl and H₂ L3 Cl) containing N-heterocyclic carbene (NHC) precursors as linkers were introduced to construct SCCs by combining with two C₃-symmertic (CpZr)₃(μ₃-O)(μ₂-OH)₃ clusters as three-connect vertices, resulted in a series of rugby-like V₂E₃ (V=vertex, E=edge) type homoleptic cages ( SCC-1 , SCC-2 and SCC-3 ). However, V₄E₆-type tetrahedral cages ( SCC-4 and SCC-5 ), incorporating six Au-NHC moieties, were obtained when the corresponding NHC-gold(I) functionalized ligands (H₂ L1 ^Au, H₂ L2 ^Au) were applied. For the first time, we present a trackable CpZr-involved cage to cage conversion to generate a heteroleptic V₂E₃ cage ( SCC-6 ) from two homoleptic cages ( SCC-2 and SCC-5 ) with different geometries of V₂E₃ and V₄E₆. The heteroleptic assembly SCC-6 can also be formed upon a subcomponent displacement strategy. The structural transformation and reassembly processes were detected and monitored by ¹H NMR spectroscopy and electrospray-ionization mass spectrometry. The formation of heteroleptic assembly was further supported by single crystal X-ray diffraction analysis. Moreover, homoleptic cage SCC-2 possesses a trigonal bipyramidal cationic cavity allowing the encapsulation of a series of sulfonate anionic guests.     

Highly Ordered Mesoporous Tungsten Oxides with a Large Pore Size and Crystalline Framework for H2S Sensing

An ordered mesoporous WO₃ material with a highly crystalline framework was synthesized by using amphiphilic poly(ethylene oxide)‐b‐polystyrene (PEO‐b‐PS) diblock copolymers as a structure‐directing agent through a solvent‐evaporation‐induced self‐assembly method combined with a simple template‐carbonization strategy. The obtained mesoporous WO₃ materials have a large uniform mesopore size (ca. 10.9 nm) and a high surface area (ca. 121 m² g^?1). The mesoporous WO₃‐based H₂S gas sensor shows an excellent performance for H₂S sensing at low concentration (0.25 ppm) with fast response (2 s) and recovery (38 s). The high mesoporosity and continuous crystalline framework are responsible for the excellent performance in H₂S sensing.     

A new copper(II) supramolecular coordination polymer and a dinuclear compound with multifunctional 2‐amino‐5‐sulfobenzoic acid and flexible N‐donor ligands: synthesis,structure and characterization

Multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂afsb) can exhibit a variety of roles during the construction of supramolecular coordination polymers. The pendant carboxylic acid, sulfonic acid and amino groups could not only play a role in directing bonding but could also have the potential to act as hydrogen‐bond donors and acceptors, resulting in extended high‐dimensional supramolecular networks. Two new Cu^II coordination compounds, namely catena‐poly[[[diaquacopper(II)]‐μ‐1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane‐κ²N⁴:N^4′] bis(3‐amino‐4‐carboxybenzenesulfonate) dihydrate], {[Cu(C₁₀H₁₆N₆)₂(H₂O)₂](C₇H₆NO₅S)₂·2H₂O}_n or {[Cu(bth)₂(H₂O)₂](Hafsb)₂·2H₂O}_n, (1), and bis(μ‐2‐amino‐5‐sulfonatobenzoato‐κ²O¹:O^1′)bis{μ‐1,2‐bis[(1H‐imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}bis[aquacopper(II)] trihydrate, [Cu₂(C₇H₅NO₅S)₂(C₁₄H₁₄N₄)₂(H₂O)₂]·3H₂O or [Cu₂(afsb)₂(obix)₂(H₂O)₂]·3H₂O, (2), have been obtained through the assembly between H₂afsb and the Cu^II ion in the presence of the flexible N‐donor ligands 1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane (bth) and 1,2‐bis[(1H‐1,2,4‐triazol‐1‐yl)methyl]benzene (obix), respectively. Compound (1) consists of a cationic coordination polymeric chain and 3‐amino‐4‐carboxybenzenesulfonate (Hafsb⁻) anions. Compound (2) exhibits an asymmetric dinuclear structure. There are hydrogen‐bonded networks within the lattices of (1) and (2). Interestingly, both (1) and (2) exhibit reversible dehydration–rehydration behaviour.     

In-source fragmentation technique for the production of thermalized ions

Our electrospray ionization-ion funnel-rf hexapole (ESI-IF-6P) source is designed to produce ions for threshold collision-induced dissociation (TCID) studies in a guided ion beam mass spectrometer. This ion source forms an initial distribution of Ca²⁺(H₂O) _x ions where x is 6–9. A new in-source fragmentation technique within the hexapole ion guide of the source is described, which is easy to implement and of modest machining and electrical costs, and is able to generate smaller Ca²⁺(H₂O) _x complexes, where x=2–5. Fragmentation is achieved by biasing an assembly of six 0.25 in. long electrodes that are inserted between the hexapole rods. The assembly is positioned in the high-pressure region of the source such that newly formed Ca²⁺(H₂O) _x ions undergo enough collisions to become thermalized, as verified by TCID studies. From the initial distribution of ions, fragmentation proceeds along the lowest energy pathway, which corresponds to sequential water loss for most complexes. However, the Ca²⁺(H₂O) complex cannot be formed using this method because charge separation into CaOH⁺ and H₃O⁺ becomes the lowest energy pathway from the Ca²⁺(H₂O)₂ complex. Therefore, this fragmentation technique can be used to identify the critical size complex for M²⁺(H₂O) _x systems, which we define as the complex size (x) at which charge separation becomes a lower energy pathway compared with simple ligand loss.     

Crystal structures and Hirshfeld surface analysis of transition‐metal complexes of 1,3‐azolecarboxylic acids

The crystal structures of five new transition‐metal complexes synthesized using thiazole‐2‐carboxylic acid (2‐Htza), imidazole‐2‐carboxylic acid (2‐H₂ima) or 1,3‐oxazole‐4‐carboxylic acid (4‐Hoxa), namely diaquabis(thiazole‐2‐carboxylato‐κ²N,O)cobalt(II), [Co(C₄H₂NO₂S)₂(H₂O)₂], 1 , diaquabis(thiazole‐2‐carboxylato‐κ²N,O)nickel(II), [Ni(C₄H₂NO₂S)₂(H₂O)₂], 2 , diaquabis(thiazole‐2‐carboxylato‐κ²N,O)cadmium(II), [Cd(C₄H₂NO₂S)₂(H₂O)₂], 3 , diaquabis(1H‐imidazole‐2‐carboxylato‐κ²N³,O)cobalt(II), [Co(C₄H₂N₂O₂)₂(H₂O)₂], 4 , and diaquabis(1,3‐oxazole‐4‐carboxylato‐κ²N,O⁴)cobalt(II), [Co(C₄H₂NO₃)₂(H₂O)₂], 5 , are reported. The influence of the nature of the heteroatom and the position of the carboxyl group in relation to the heteroatom on the self‐assembly process are discussed based upon Hirshfeld surface analysis and used to explain the observed differences in the single‐crystal structures and the supramolecular frameworks and topologies of complexes 1 – 5 .     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

A triangular palladium(II) supramolecular coordination complex based on 1,4‐bis(1H‐imidazol‐1‐yl)benzene and (2,2′‐bipyridyl)palladium(II) nitrate: synthesis and crystal structure

The self‐assembly of ditopic bis(1H‐imidazol‐1‐yl)benzene ligands ( L ^H) and the complex (2,2′‐bipyridyl‐κ²N,N′)bis(nitrato‐κO)palladium(II) affords the supramolecular coordination complex tris[μ‐bis(1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′]‐triangulo‐tris[(2,2′‐bipyridyl‐κ²N,N′)palladium(II)] hexakis(hexafluoridophosphate) acetonitrile heptasolvate, [Pd₃(C₁₀H₈N₂)₃(C₁₂H₁₀N₄)₃](PF₆)₆·7CH₃CN, 2 . The structure of 2 was characterized in acetonitrile‐d₃ by ¹H/¹³C NMR spectroscopy and a DOSY experiment. The trimeric nature of supramolecular coordination complex 2 in solution was ascertained by cold spray ionization mass spectrometry (CSI–MS) and confirmed in the solid state by X‐ray structure analysis. The asymmetric unit of 2 comprises the trimetallic Pd complex, six PF₆^? counter‐ions and seven acetonitrile solvent molecules. Moreover, there is one cavity within the unit cell which could contain diethyl ether solvent molecules, as suggested by the crystallization process. The packing is stabilized by weak inter‐ and intramolecular C—H…N and C—H…F interactions. Interestingly, the crystal structure displays two distinct conformations for the L ^H ligand (i.e. syn and anti), with an all‐syn‐[Pd] coordination mode. This result is in contrast to the solution behaviour, where multiple structures with syn/anti‐ L ^H and syn/anti‐[Pd] are a priori possible and expected to be in rapid equilibrium.     

A three‐dimensional ZnII coordination network based on 5,5′‐methylenebis(2,4,6‐trimethylisophthalic acid) and 2,7‐bis(1H‐imidazol‐1‐yl)fluorene: synthesis,structure and luminescence properties

In recent years, coordination polymers constructed from multidentate carboxylate ligands and N‐containing ligands have attracted much attention since these ligands can adopt a rich variety of coordination modes which can lead to crystalline products with intriguing structures and interesting properties. A new coordination polymer, namely poly[[diaqua[μ‐2,7‐bis(1H‐imidazol‐1‐yl)fluorene‐κ²N³:N^3′][μ‐5,5′‐methylenebis(3‐carboxy‐2,4,6‐trimethylbenzoato)‐κ²O¹:O^1′]zinc(II)] hemihydrate], {[Zn(C₂₃H₂₂O₈)(C₁₉H₁₄N₄)(H₂O)₂]·0.5H₂O}_n, 1 , was prepared by the self‐assembly of Zn(NO₃)₂·6H₂O with 5,5′‐methylenebis(2,4,6‐trimethylisophthalic acid) (H₄BTMIPA) and 2,7‐bis(1H‐imidazol‐1‐yl)fluorene (BIF) under solvothermal conditions. The structure of 1 was determined by elemental analysis, single‐crystal X‐ray crystallography, powder X‐ray diffraction, IR spectroscopy and thermogravimetric analysis. Each Zn^II ion is six‐coordinated by two O atoms from two H₂BTMIPA^2? ligands, by two N atoms from two BIF ligands and by two water molecules, forming a distorted octahedral ZnN₂O₄ coordination geometry. Adjacent Zn^II ions are linked by H₂BTMIPA^2? ligands and BIF ligands, leading to the formation of a two‐dimensional (2D) (4,4)‐ sql network, and intermolecular hydrogen‐bonding interactions connect the 2D layer structure into the three‐dimensional (3D) supramolecular structure. Each 2D layer contains two kinds of helices with the same direction, which are opposite in adjacent layers. The luminescence properties of complex 1 in the solid state have also been investigated.     

Synthesis,crystal structure and photoluminescence of a three‐dimensional zinc coordination compound with NBO‐type topology

The assembly of metal–organic frameworks (MOFs) with metal ions and organic ligands is currently attracting considerable attention in crystal engineering and materials science due to their intriguing architectures and potential applications. A new three‐dimensional MOF, namely poly[[diaqua(μ₈‐para‐terphenyl‐3,3′,5,5′‐tetracarboxylato)dizinc(II)] dimethylformamide disolvate monohydrate], {[Zn₂(C₂₂H₁₀O₈)(H₂O)₂]·2C₃H₇NO·H₂O}_n, was synthesized by the self‐assembly of Zn(NO₃)₂·6H₂O and para‐terphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄TPTC) under solvothermal conditions. The compound was structurally characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction analysis. Each Zn^II ion is located in a square‐pyramidal geometry and is coordinated by four carboxylate O atoms from four different TPTC^4? ligands. Pairs of adjacent equivalent Zn^II ions are bridged by four carboxylate groups, forming [Zn₂(O₂CR)₄] (R = terphenyl) paddle‐wheel units. One aqua ligand binds to each Zn^II centre along the paddle‐wheel axis. Each [Zn₂(O₂CR)₄] paddle wheel is further linked to four terphenyl connectors to give a three‐dimensional framework with NBO‐type topology. The thermal stability and solid‐state photoluminescence properties of the title compound have also been investigated.     

Two Novel Isostructural 3D Ln–Sr (Ln = Eu; Gd) Coordination Polymers Based on Oxalate Ligands with Unusual Topology: Synthesis,Crystal Structures,and Luminescence

The self‐assembly of oxalic acid with metal salts under hydrothermal conditions gave two isostructural 3D lanthanide alkaline earth heterometallic coordination polymers, [Ln₂Sr(OX)₄(H₂O)₆ · 3H₂O]_n [Ln = Eu ( 1 ), Gd ( 2 ); OX = oxalate]. Compounds 1 and 2 are 3D coordination frameworks built from 2D lanthanide carboxylate layers and SrO₉ units by sharing OX ligands with the unusual 2,5‐connected (16)₃(8⁴.12².16⁴)₂(8)₄ net. Furthermore, the luminescent property of complex 1 was investigated.     

1,3,5-苯三乙酸-钬配合物的合成、结构和磁性质研究

利用柔性三脚架配体1,3,5-苯三乙酸(H₃bta)与Ho(NO₃)₃•6H₂O在水热条件下组装得到了一个具有三维孔道结构的配位聚合物: {[Ho(bta)(H₂O)]•1.26H₂O}_n (1). X射线单晶衍射分析表明该配合物属三斜晶系, 空间群P-1, 晶胞参数 a＝0.7621(4) nm, b＝0.9634(4) nm, c＝1.0500(5) nm, α＝106.409(18)°, β＝105.273(18)°, γ＝100.88(2)°, Z＝2, V＝0.6839(6) nm³, D_c＝2.208 g/cm³, μ＝5.824 mm^－1, F(000)＝437, R₁＝0.0224, wR₂＝0.0462. 在1.8～300 K的温度范围内研究了该配合物固体样品的磁性质.     

Three porous coordination polymers of Co2+ and dpdo ligands with channels hosting polyanion chains

Three porous coordination polymers, {[Co(dpdo)₄(H₂O)₂][H(H₂O)₆](PMo₁₂O₄₀)} _n (1), {[Co(dpdo)₄(H₂O)₂][H₃O(CH₃OH)₄](PMo₁₂O₄₀)} _n (2) and {[Co(dpdo)₄(H₂O)₂][K(CH₃OH)₄](PMo₁₂O₄₀)} _n (3) (where dpdo is 4,4′-bipyridine-N,N′-dioxide), with special channels for the chain-like assembly of polymeric Keggin-type anions have been synthesized through self-assembly of Co²⁺ and dpdo ligands in acetonitrile/water or methanol/water solutions and characterized by single crystal X-ray diffraction. Based on layers constructed by [Co(dpdo)₄(H₂O)₂]^{2 +} and different bridging units for charge compensation between layers, the three compounds exhibit similar noninterwoven networks with large channels occupied by the poly-Keggin-anion chains. Thermogravimetric analyses suggest that the three supramolecular networks have different thermal stabilities based on different cationic bridging units.     

Substituent effects of two isophthalate derivatives on the construction of cadmium coordination polymers incorporating a dipyridyl ligand

In recent years, the design and construction of crystalline coordination complexes by the assembly of metal ions with multitopic ligands have attracted considerable attention because of the unique architectures and potential applications of these compounds. Two new coordination polymers, namely poly[[μ‐trans‐1‐(2‐aminopyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N:N′](μ₃‐5‐methylisophthalato‐κ⁴O¹,O^1′:O³:O^3′)cadmium(II)], [Cd(C₉H₆O₄)(C₁₂H₁₁N₃)]_n or [Cd(5‐Me‐ip)(2‐NH₂‐3,4‐bpe)]_n, ( I ), and poly[[μ‐trans‐1‐(2‐aminopyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N:N′](μ₂‐5‐hydroxyisophthalato‐κ⁴O¹,O^1′:O³:O⁵)cadmium(II)], [Cd(C₈H₄O₅)(C₁₂H₁₁N₃)]_n or [Cd(5‐HO‐ip)(2‐NH₂‐3,4‐bpe)]_n, ( II ), have been prepared hydrothermally by the self‐assembly of Cd(NO₃)₂·4H₂O and trans‐1‐(2‐aminopyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene (2‐NH₂‐3,4‐bpe) with two similar dicarboxylic acids, i.e. 5‐methylisophthalic acid (5‐Me‐H₂ip) and 5‐hydroxyisophthalic acid (5‐HO‐H₂ip). The coordination network of ( I ) is a two‐dimensional sql net parallel to (101). Adjacent sql nets are further linked to form a three‐dimensional supramolecular framework via hydrogen‐bonding interactions. Compound ( II ) is a two‐dimensional (3,5)‐connected coordination network parallel to (010) with the point symbol (6³)(5⁵6⁴7). As the other reactants and reaction conditions are the same, the structural differences between ( I ) and ( II ) are undoubtedly determined by the different substituent groups in the 5‐position of isophthalic acid. Both ( I ) and ( II ) exhibit good thermal stabilities and photoluminescence properties.     

Crystal Structures and Proton Conductivities of a MOF and Two POM–MOF Composites Based on CuII Ions and 2,2′‐Bipyridyl‐3,3′‐dicarboxylic Acid

We have succeeded in constructing a metal–organic framework (MOF), [Cu(bpdc)(H₂O)₂]_n (H₂bpdc=2,2′‐bipyridyl‐3,3′‐dicarboxylic acid, 1 ), and two poly‐POM–MOFs (POM=polyoxometalate), {H[Cu(Hbpdc)(H₂O)₂]₂[PM₁₂O₄₀] ? n H₂O}_n (M=Mo for 2 , W for 3 ), by the controllable self‐assembly of H₂bpdc, Keggin‐anions, and Cu²⁺ ions based on electrostatic and coordination interactions. Notably, these three compounds all crystallized in the monoclinic space group P2₁/n, and the Hbpdc^? and bpdc^2? ions have the same coordination mode. Interestingly, in compounds 2 and 3 , Hbpdc^? and the Keggin‐anion are covalently linked to the transition metal copper at the same time as polydentate organic ligand and as polydentate inorganic ligand, respectively. Complexes 2 and 3 represent new and rare examples of introducing the metal N‐heterocyclic multi‐carboxylic acid frameworks into POMs, thereby, opening a pathway for the design and the synthesis of multifunctional hybrid materials based on two building units. The Keggin‐anions being immobilized as part of the metal N‐heterocyclic multi‐carboxylic acid frameworks not only enhance the thermal stability of compounds 2 and 3 , but also introduce functionality inside their structures, thereby, realizing four approaches in the 1D hydrophilic channel used to engender proton conductivity in MOFs for the first time. Complexes 2 and 3 exhibit good proton conductivity (10^?4 to ca. 10^?3 S cm^?1) at 100 °C in the relative humidity range 35 to about 98 %.     

Cadmium(II)–Triazole Framework as a Luminescent Probe for Ca2+ and Cyano Complexes

A bidentate ligand, 1‐{4‐[4‐(1H‐1,2,4‐triazol‐1‐yl)phenoxy]phenyl}‐1H‐1,2,4‐triazole (TPPT), has been designed and synthesized. By using TPPT as a building block for self‐assembly with Cd(NO₃)₂ ? 4 H₂O and CdCl₂ ? 10.5 H₂O, novel 1D double‐chain {[Cd(TPPT)(NO₃)₂] ? 3 H₂O}_n ( 1 ) and 2D (4,4) layer [Cd(TPPT)Cl₂(H₂O)]_n ( 2 ) have been constructed. When 1 was employed as a precursor and exposed to DMF or N,N′‐dimethylacetamide (DMAC), the crystals of 1 dissolved and reassembled into two types of brown block‐shaped crystals of 1D double chains: {[Cd(TPPT)₂(NO₃)₂] ? DMF}_n ( 1 a ) and {[Cd(TPPT)₂(NO₃)₂] ? DMAC}_n ( 1 b ). The anion‐exchange reactions of complex 2 have also been investigated. After gently stirring crystals of 2 in CHCl₃/C₂H₅OH/H₂O containing NaBr, NaI ? 2 H₂O, or NaOAc ? 3 H₂O, the crystals retained their crystalline appearances. A remarkable single crystal to single crystal transformation was observed and 1D double chains of {[Cd(TPPT)Br₂] ? C₂H₅OH}_n ( 2 a ) and {[Cd(TPPT)₂I₂] ? CHCl₃}_n ( 2 b ), and 1D single chains of [Cd(TPPT)(H₂O)₂(CH₃COO)₂]_n ( 2 c ), can be obtained. Luminescent properties indicate that 1 shows excellent selectivity for Ca²⁺ and cyano complexes. To the best of our knowledge, this is the first example of a luminescent probe for Ca²⁺ based on triazole derivatives.     

Synthesis of a new iron–sulfur cluster compound and its photocatalytic H2 evolution activity through visible light irradiation

A new iron–sulfur cluster compound, namely [(μ‐BNT)Fe₂(CO)₆] ( A ; BNT = (R)‐1,1′‐binaphthalene‐2,2′‐dithiol), was synthesized by self‐assembly of BNT with [Fe₃(CO)₁₂] and characterized using ¹H NMR, ¹³C NMR, infrared spectra and elemental analysis. The H₂ evolution activity of A was evaluated in a constructed homogeneous photocatalytic system by combining A as catalyst, xanthene dyes as photosensitizer and triethylamine as sacrificial reagent, to give efficient H₂ generation under visible‐light irradiation (λ > 420 nm). The maximum H₂ evolution of 404 turnovers (versus catalyst) was recorded under optimal conditions in CH₃CN–H₂O (1:1, v/v) after 4 h irradiation. The mechanism of H₂ evolution is briefly discussed using fluorescence spectra and electrochemical analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Three Transition Metal(II) Coordination Polymers Constructed by a Semi‐rigid Bis‐pyridyl‐bis‐amide and Dicarboxylates Mixed Ligands: Assembly,Structures and Properties

Three coordination polymers, namely [Co(BDC)( L )] · H₂O ( 1 ), [Co(NPH)( L )] · H₂O ( 2 ), and [Ni(NPH)( L )(H₂O)₃] · H₂O ( 3 ) [H₂BDC = 1, 3‐benzenedicarboxylic acid, H₂NPH = 3‐nitrophthalic acid, L = N,N′‐bis(3‐pyridyl)‐terephthalamide] were hydrothermally synthesized by self‐assembly of cobalt/nickel chloride with a semi‐rigid bis‐pyridyl‐bis‐amide ligand and two aromatic dicarboxylic acids. Single crystal X‐ray diffraction analyses revealed that complexes 1 and 2 are two‐dimensional (2D) coordination polymers containing a one‐dimensional (1D) ribbon‐like Co‐dicarboxylate chain and a 1D zigzag Co‐ L chain. Although the coordination numbers of Co^II ions and the coordination modes of two dicarboxylates are different in complexes 1 and 2 , they have a similar 3, 5‐connected {4².6⁷.8}{4².6} topology. In complex 3 , the adjacent Ni^II ions are linked by L ligands to form a 1D polymeric chain, whereas the 1D chains does not extend into a higher‐dimensional structure due to the ligand NPH with monodentate coordination mode. The adjacent layers of complexes 1 and 2 and the adjacent chains of 3 are further linked by hydrogen bonding interactions to form 3D supramolecular networks. Moreover, the thermal stabilities, fluorescent properties, and photocatalytic activities of complexes 1 – 3 were studied.     

Hydrogen‐bonded sheets in 2‐(2‐aminophenyl)‐1H‐benzimidazol‐3‐ium dihydrogen phosphate

The title salt, C₁₃H₁₂N₃⁺·H₂PO₄⁻, contains a nonplanar 2‐(2‐aminophenyl)‐1H‐benzimidazol‐3‐ium cation and two different dihydrogen phosphate anions, both situated on twofold rotation axes in the space group C2. The anions are linked by O—H...O hydrogen bonds into chains of R₂²(8) rings. The anion chains are linked by the cations, via hydrogen‐bonding complementarities and electrostatic interactions, giving rise to a sheet structure with alternating rows of organic cations and inorganic anions. Comparison of this structure with that of the pure amine reveals that the two compounds generate characteristically different sheet structures. The anion–anion chain serves as a template for the assembly of the cations, suggesting a possible application in the design of solid‐state materials.