Determination of bismuth and zinc in pharmaceuticals by first derivative UV-Visible spectrophotometry

A first order derivative spectrophotometric method has been developed for the simultaneous determination of bismuth and zinc by dithizone without time-consuming extraction step. The reactions of bismuth and zinc with dithizone in a three component solution prepared in water, acetone and n-propanol mixture have been investigated. These cations react with dithizone in this mixture at pH 5.0, forming coloured complex that is stable for at least 2 h. The linear range in D evaluation was between 3.0 × 10⁻⁶ and 1.8 × 10⁻⁵ mol l⁻¹ for Zn and 2.4 × 10⁻⁶ and 1.2 × 10⁻⁵ mol l⁻¹ for Bi. The limits of detection for the analytical procedure were found 0.05 mg l⁻¹ for both cations. The relative standard deviations for the determination of 0.5 mg l⁻¹ bismuth and 0.5 mg l⁻¹ zinc were 1.2 and 1.1%, respectively, for five determinations. The procedure is simple, rapid and reliable. This method was applied to the determination of bismuth and zinc in the pharmaceutical materials successfully. Good agreement was achieved between the results obtained by the proposed and comparative methods.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.     

Determination of amphetamines in human urine by liquid chromatography with fluorimetric detection using a solid-phase extraction procedure

A precise and feasible HPLC method has been developed for the analysis of amphetamine (AMPH), methamphetamine (MAMPH) and methylenedioxymethamphetamine (MDMA, ecstasy) in human urine. A chromatographic run on a C8 Genesis (150 mm x 4.6 mm, 5 microm) column maintained at 30 degrees C lasts about 17 min, using a mobile phase composed of ACN (12%) and a pH 2.5 phosphate buffer (88%) containing 0.3% triethylamine. Mirtazapine was used as the internal standard. Good linearity was found in the 100-2000 ng/mL concentration range for AMPH and MAMPH and in the 12-2000 ng/mL concentration range for MDMA. The pretreatment of urine samples was carried out by means of a careful SPE procedure on C2 cartridges. The extraction yields were very satisfactory for all analytes, with average values greater than 97%. The leading conditions allowed the determination of AMPH, MAMPH and MDMA with satisfactory precision and accuracy. The method has been successfully applied to the determination of the analytes in urine of AMPH users.     

Determination of strontium and simultaneous determination of strontium oxide, magnesium oxide and calcium oxide content of Portland cement by derivative ratio spectrophotometry

A derivative spectrophotometric method has been developed for the determination of strontium in Portland cement. The method is applied successfully for the simultaneous determination of SrO, MgO and CaO. It is based on the use of Alizarin Complexone (AC) as a complexing agent and measurement of the derivative ratio spectra of the analytes. Interferences of manganese(II) and zinc(II) were eliminated by precipitation. The validity of the method was examined by analyzing several Standard Reference Material (SRM) Portland cement samples. The strontium complex formed at pH 9.5 allows precise and accurate determination of strontium over the concentration range of 1.5-18 mg L⁻¹ of strontium. The MDL (at 95% confidence level) was found to be 25 ng mL⁻¹ for strontium in National Institute of Standards and Technology (NIST) cement samples using the proposed method.     

Simultaneous determination of chlorophyll a and chlorophyll b by derivative spectrophotometry

Chlorophyll a (Chl a) and chlorophyll b (Chl b) plant pigments, which are important in the food industry and are beneficial as environmental pollution indicators, have been extracted with a novel solvent mixture (1:1 v/v acetone–propanol) not containing chloroform and simultaneously determined by first-derivative spectrophotometry. The results were statistically compared to those obtained by the ordinary absorption spectrophotometric reference utilizing the principle of additivity of absorbances. The testing of the developed method in synthetic mixtures of Chl a and Chl b and in real plant material samples (grass, spinach, chard, purslane, black cabbage, crisp lettuce, rocket, dill and seaweed) proved successful in that the developed extractive derivative spectrophotometric method was both rapid and precise, and was not dependent on the Chl a/b ratio in contrast to the reference method which was adversely affected by the latter parameter.     

Determination of hydroxy-PCBs in urine by gas chromatography/mass spectrometry with solid-phase extraction and derivatization

A sensitive derivatization and extraction method is proposed for the determination of hydroxy-PCBs in urine. Phenolic hydroxyl groups of PCBs were allowed to react with five different reagents such as iodomethane, iodoethane, iodopropane, BSTFA and MTBSTFA. Propylated products at 100 °C for 30 min showed the best sensitivity with mass selective detector. Extraction recoveries and relative standard deviations of hydroxy-PCBs by SPE using C2 column were in the range of 78.0-112.3% and 2.5-9.6%, respectively. Instrumental detection limits for derivatized hydroxy-PCBs were in the range of 1-2 pg and were 10-1000 times more sensitive than those of non-derivatized hydroxy-PCBs. The correlation coefficients of the linear regression curves exceed 0.99, and the intra- and inter-day precisions were evaluated by RSDs within 10% at the concentrations of 0.4 and 4.0 ng/mL.     

Molecularly imprinted solid-phase extraction for the selective HPLC determination of ractopamine in pig urine

A method was developed for the determination of ractopamine in pig urine using molecularly imprinted solid-phase extraction (MISPE) as the sample clean-up technique combined with high-performance liquid chromatography. The molecularly imprinted polymer (MIP) was synthesized in acetonitrile-triethylamine system using ractopamine (RAC) as the template and acrylamide as the monomer. The binding capacity of the polymer toward RAC was found to be about 2.57 mg of ractopamine/g of polymer. The optimal procedures for MISPE consisted of conditioning with 3 mL methanol, equilibrating with 3 mL of water, loading volume of <10 mL of aqueous sample (pH 7), washing with 3 mL water and 3 mL methanol, and eluting with 5 mL of 5% ammonia in methanol. In the four spiked samples with the levels of 0.01, 0.1, 1.0 and 5.0 μg/mL, the mean recoveries of analyte on the MIP were higher than 90% with relative standard deviation <10%, and significant differences between imprinted and non-imprinted materials were observed. The MIP selectivity was evaluated by checking 11 drugs with similar and different molecular structures to that of RAC. The characteristics of three-dimensional cavities and hydrogen bond interaction were regarded as the main factors that dominated the retention of RAC on the MISPE cartridge.     

Determination of tungsten with pyrocatechol violet by first-derivative solid-phase spectrophotometry

Derivative spectrophotometry was applied to solid-phase spectrophotometry in order to enhance its sensitivity and remove the large background caused by the absorbance of the resin layer. Determination of micro-amounts of tungsten with pyrocatechol violet to form a 21 green complex in acid medium which is fixed on a dextran-type anion-exchange resin (Sephadex QAEA-25) is described as an example for the application of this technique. The absorbance of the resin packed in a 1-mm spectrophotometric cell, was measured directly. The characteristic peak amplitude of the signal at 674 nm in the first-derivative spectrum is useful for quantitative determination of tungsten (3–16 g 1^–1; RSD 5.8%) in natural and industrial water samples.     

固相萃取-气相色谱-质谱法分析尿液中邻苯二甲酸单酯和双酯

建立了固相萃取-气相色谱-质谱测定尿液中邻苯二甲酸单酯和双酯的分析方法。尿液经 β-葡萄糖苷酸酶酶解后进行固相萃取净化,用乙腈、乙酸乙酯和乙醚-正己烷(1: 19, v/v)分别洗脱,合并洗脱液,氮气吹干后,用N,O-双三甲基硅基三氟乙酰胺(BSTFA)对邻苯二甲酸单酯进行硅烷化处理,使用气相色谱-质谱法检测。邻苯二甲酸单酯和双酯的线性范围为5~1000 μ g/L,检出限为0.3~1.1 μ g/L,回收率为77.9%~97.7%,相对标准偏差为3.7%~10.9%。应用该方法对50份尿液进行检测,检出邻苯二甲酸二(2-乙基己基)酯(DEHP)等7种邻苯二甲酸单酯和双酯类物质,平均质量浓度为6.0~142.7 μ g/L。该方法准确、可靠、灵敏度高,适用于尿液中邻苯二甲酸单酯和双酯的同时测定。     

Determination of Simvastatin in tablet formulations by derivative UV spectrophotometry

An investigation of UV spectroscopic methods, i.e. absorbance, 1st and 2nd derivative spectra for the determination of simvastatin in tablet formulations has been undertaken. This work investigated the possible difficulties that might arise due to the presence of UV absorbing excipients and likely presence of degradation products in such assays. We have demonstrated that the presence of ascorbic acid as an excipient causes interference with simple absorbance measurements leading to a gross over-determination of the simvastatin. 1st and 2nd derivative methods appear to eliminate this problem. We have also shown that the degradation product of simvastatin, i.e. simvastatin β-hydroxy acid, having an almost identical spectrum to the parent drug, may cause problems in the UV spectroscopic determination of the drug in degraded samples.     

Determination of ciprofloxacin in human urine and serum samples by solid-phase spectrofluorimetry

A method for the determination of trace amounts of ciprofloxacin has been developed, based on solid-phase spectrofluorimetry. The relative fluorescence intensity of ciprofloxacin fixed on Sephadex SP C-25 gel was measured directly after packing the gel beads in a 1-mm silica cell, using a solid-phase attachment. The wavelengths of excitation and emission were 272 and 448 nm, respectively. Using a sample volume of 1000 ml, the linear concentration range of application was 0.3-10.0 ng.ml(-1) of ciprofloxacin, with a R.S.D. of 1.2% (for a level of 4.0 ng.ml(-1)) and a detection limit of 0.1 ng.ml(-1). The method was applied to the determination of ciprofloxacin in human urine and serum samples. It was validated applying the standard addition methodology and using HPLC as a reference method. Recovery levels of the method reached 100% in all cases.     

Determination of trace amounts of beryllium using derivative spectrophotometry in non-ionic micellar medium

A rapid and sensitive method for the trace level determination of beryllium based on the formation of a 1:2 complex (λ_max 560 nm) with 1,4-dihydroxy-9,10-anthracenedione in an aqueous medium containing Triton X-100 is reported. Beer’s law is followed in the range 3.60–360 ng ml⁻¹ of Be(II). The molar absorptivity and Sandell’s sensitivity are 1.68×10⁴ l mol⁻¹cm⁻¹ and 0.54 ng cm⁻², respectively; detection limit is 0.23 ng ml⁻¹ of Be(II). Analysis of synthetic mixtures of composition similar to that of alloys and spiked samples of distilled water, gave results that are in agreement with their beryllium content.     

Analysis of alendronate in human urine and plasma by magnetic solid-phase extraction and capillary electrophoresis with fluorescence detection

A simple, rapid and sensitive CE-fluorescence (FL) detection method for the analysis of alendronate (ALEN), a bisphosphonate drug, has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 10.0) and a voltage of 24 kV, separation of ALEN in a 55-cm length (35-cm effective length) capillary was achieved in 5 min. FL detection of ALEN was performed via pre-column derivatization with 2,3-naphthalene dicarbox-yaldehyde (NDA). Linear correlation (r=0.9981, n=6) between FL intensity and analyte concentration was obtained in the range of 7-200 ng/mL ALEN. The developed CE-FL method was applied to the analysis of ALEN in human urine and plasma samples. In order to eliminate the interfering matrix components, SPE using magnetic Fe(3) O(4) @Al(2) O(3) nanoparticles as solid sorbents was employed to clean the biological fluids before CE-FL analysis. The linear ranges of ALEN in urine and plasma were 5-100 ng/mL (r = 0.9982, n = 7) and 5-70 ng/mL (r = 0.9954, n = 7), respectively. The LOD and LOQ in both urine and plasma samples were 1.5 and 5 ng/mL ALEN, respectively. Total analysis time including sample pre-treatment and CE separation was less than 1.5 h.     

枸橼酸铋雷尼替丁胶囊有效成份的紫外分光光度法的测定

提出了对枸橼酸铋雷尼替丁胶囊有效成份进行紫外分光光度测定的新方法,该方法简便、快速、准确度高,能用于纯度较高的样品分析,可作为枸橼酸铋雷尼替丁胶囊药品质量标准控制方法。     

衍生荧光法测定盐酸西布曲明

通过衍生反应，建立了用荧光光度法测定盐酸西布曲明的新方法。并对衍生体系、反应条件、产物稳定性等进行了研究。实验确定丙二酸和乙酸酐混合试剂与盐酸西布曲明在75℃的水浴中加热15min，所得产物发射强荧光，最大激发波长λcx=456nm，最大发射波长λem=496nm。在上述波长下，荧光强度与盐酸西布曲明的质量浓度在0．11～9．5μg／mL范围内呈良好的线性关系，检出限为13．4ng／mL，标准加入回收率在95．4％～104．2％。用于曲美胶囊中盐酸西布曲明的测定。     

Determination of flurbiprofen in pharmaceutical formulations by UV spectrophotometry and liquid chromatography

In this study, a new and rapid UV spectrophotometric (UV) method and a reversed phase high performance liquid chromatographic (LC) method were developed for quantitative estimation of flurbiprofen, a non-selective, non-steroidal, anti-inflammatory drug (NSAID), in pure form and in pharmaceutical dosage form. The solvent system, wavelength of detection, chromatographic conditions were optimized in order to maximize the sensitivity of both the proposed methods. The linear regression equations obtained by least square regression method were Abs=7.5906×10⁻² concentration (μg/ml) + (−) 4.6210×10⁻² for the UV method, and peak area=1.2652×10² concentration (ng/ml) + 1.4830×10³ for the LC method. The detection limit as per the error propagation theory was found to be 0.34 μg/ml for UV method and 15 ng/ml for LC method. The developed methods were successfully employed with high degree of precision and accuracy for the estimation of total drug content in two commercial ophthalmic drops of flurbiprofen. The results of analysis were treated statistically, as per USP 2000 and International Conference on Harmonization (ICH) guidelines for validation of analytical procedures, and by recovery studies. The results obtained from UV method were comparable with those obtained by using LC. It was concluded that both the developed methods are equally accurate, sensitive, precise, reproducible, robust and rugged and could be applied directly and easily to the pharmaceutical preparations of flurbiprofen. However, LC method is useful at very low level (ng/ml), whereas UV method is suitable at μg/ml level.     

制革废水中总铬的萃取光度法测定

研究了在含氯离子的酸性溶液中,用醋酸戊酯萃取二甲基吲哚二羰花青(DIDC)染料与Cr(Ⅵ)配合物,基于此,建立了一种测定Cr(Ⅵ)的新的光度法。结果表明在3 5mol/L～5 0mol/L的HCl介质中,醋酸戊酯对配合物的萃取率最高;最大吸收波长为640nm;摩尔吸光系数为3 6×105L·mol-1·cm-1,检出限为2 0×10-3mg/L,有色溶液的吸光度与Cr(Ⅵ)量在0 01mg/L～2 1mg/L范围内符合比尔定律,加标回收率为96 8%～104 5%(n=6),Cr(Ⅵ)∶Cl-∶DIDC的摩尔比为1∶1∶1。本法测定了制革废水中的总铬含量。     

Determination of sulphathiazole in the presence of sulphametazine by first-derivative solid-phase spectrophotometry

Sulphathiazole in the presence of sulphametazine is determined by a method based on derivative solid-phase spectrophotometry. Both compounds are fixed on a dextran-type cation-exchange gel. The absorbance of the gel, packed in a 1-mm silica cell, is measured directly. The range of application is between 0.20 and 18.0 g/ml of sulphathiazole in the presence of up to 20 g/ml of sulphametazine, the relative standard deviation is 0.6% and the detection limit is 0.05 g/ml. The method has been applied to the determination of sulphathiazole in synthetic mixtures and pharmaceuticals, with recoveries of 95.0 to 102.5%     

Determination of basic azaarenes in aviation kerosene by solid-phase extraction and HPLC-fluorescence detection

SPE in combination with HPLC and fluorescence detection has been used for sensitive determination of six basic azaarenes (7,8-benzoquinoline, 7,9-dimethylbenz[c]acridine, 9-amino-1,2,3,4-tetrahydroacridine, 9-methylacridine, acridine, and dibenz[a,j]acridine) in aviation kerosene (jet fuel). SPE was performed in a single step using a strong cation exchange sorbent. The HPLC system consisted of C18 column with a selected detection program of optimal λ_exc and λ_em. A gradient elution with ACN and phosphate buffer (pH 6.5) at a flow rate of 1 mL/min allowed efficient and fast separation of azaarenes within 15 min. The LOD and LOQ values (S/N ratio 3:1 and 10:1, respectively) were between 0.0013 and 0.021 and from 0.0044 to 0.072 ng per injection. The calibration curves showed linear behavior from the LOQ to 250 μg/L (r² >0.99). For the spiked concentration of 6.0 μg/L, recoveries were from 92 to 107% for jet fuel samples, except for 9-amino-1,2,3,4-tetrahydroacridine, which presented 68% recovery. The proposed method was applied to the quantification of those six basic azaarenes in one commercial kerosene and in three aviation kerosene samples. The presence of 7,8-benzoquinoline (up to 3.2 μg/L) and dibenzo[a,j]acridine (up to 6.3 μg/L) was confirmed in aviation kerosene.     

Determination of unsulphonated quinoline yellow in soft drinks by solid-phase spectrophotometry

A spectrophotometric method for determination of quinoline yellow spirit soluble (QYSS) in the presence of sulphonated quinoline yellow water soluble (QYWS) in soft drinks at trace levels is reported. The method is based on the fixation of QYSS on C-18 silica gel, followed by measurement of its absorbance at = 418 nm in the solid phase after being packed in a 1-mm cell. The applicable concentration range was 1.5–15.0 ng/ml, the detection limit 0.4ng/ml and the relative standard deviation 5.2%. The method was applied satisfactorily to the determination of this compound in samples of commercial soft drinks.