On the transport of emulsions in porous media

Emulsions appear in many subsurface applications including bioremediation, surfactant-enhanced remediation, and enhanced oil-recovery. Modeling emulsion transport in porous media is particularly challenging because the rheological and physical properties of emulsions are different from averages of the components. Current modeling approaches are based on filtration theories, which are not suited to adequately address the pore-scale permeability fluctuations and reduction of absolute permeability that are often encountered during emulsion transport. In this communication, we introduce a continuous time random walk based alternative approach that captures these unique features of emulsion transport. Calculations based on the proposed approach resulted in excellent match with experimental observations of emulsion breakthrough from the literature. Specifically, the new approach explains the slow late-time tailing behavior that could not be fitted using the standard approach. The theory presented in this paper also provides an important stepping stone toward a generalized self-consistent modeling of multiphase flow.     

Kinetic adhesion of bacterial cells to sand: cell surface properties and adhesion rate

Correlation between microbial surface thermodynamics using the extended DLVO (XDLVO) theory and kinetic adhesion of various bacterial cells to sand was investigated. Two experimental setups were utilized. Adhesion tests were conducted in batch reactors with slow agitation. Also, bacteria were circulated through small sand columns in a closed loop and the results were analyzed with a simple model which accounted for the rate of the adhesion phenomena (omega in h(-1)) and adhesion percentage. Cells surface properties were derived from contact angle measurements. The wicking method was utilized to characterize the sand. Zeta potentials were measured for the sand and the cells. Kinetic of bacterial retention by the porous media was largely influenced by the electrostatic interactions which are correlated with omega from the model (R(2)=0.71). Negative zeta potentials resulted in electrostatic repulsions occurring between the sand and the bacterial cells which in result delayed bacterial adhesion. While no correlation was found between the adhesion percentage and the total interaction energy calculated with the XDLVO theory the respective behavior of hydrophobic and hydrophilic bacteria as well as the importance of electrostatic interactions was evidenced. All the bacterial strains studied adhered more in the column experiments than in the adhesion tests, presumably due to enhanced collision efficiency and wedging in porous media, while filtration could be ignored except for the larger Bacillus strains. Approximate XDLVO calculations due to solid surface nanoscale roughness, retention in a secondary minimum and population heterogeneity are discussed. Our results obtained with a large variety of different physicochemical bacterial strains highlights the influence of both surface thermodynamics and porous media related effects as well as the limits of using the XDLVO theory for evaluating bacterial retention through porous media.     

Aligned Fibrous Scaffold Induced Aligned Growth of Corneal Stroma Cells in vitro Culture

To investigate the contribution of fibre arrangement to guiding the aligned growth of corneal stroma cells, aligned and randomly oriented fibrous scaffolds of gelatin and poly-L-lactic acid(PLLA) were fabricated by electrospinning. A comparative study of two different systems with corneal stroma cells on randomly organized and aligned fibres were conducted. The efficiency of the scaffolds for inducing the aligned growth of cells was assessed by morphological observation and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide(MTT) assay. Results show that the cells cultured on both randomly oriented and aligned scaffolds maintained normal morphology and well spreading as well as long term proliferation. Importantly, corneal stroma cells grew high orderly on the aligned sca- ffold, while the cells grew disordered on the randomly oriented scaffold. Moreover, the cells exhibited higher viability in aligned scaffold than that in randomly oriented scaffold. These results indcate that electrospinng to prepare aligned fibrous scaffolds has provided an effective approach to the aligned growth of corneal stroma cells in vitro. Our findings that fiber arrangement plays a crucial role in guiding the aligned growth of cells may be helpful to the development of better biomaterials for tissue engineered cornea.     

Surface charge property governing co-transport of illite colloids and Eu(III) in saturated porous media

The transport of colloids and radionuclides is sophisticated because of the variety of charge properties between colloidal particles and host subsurface media, which causes great difficulty in establishing a reliable model of radionuclides migration by taking the colloid phase into consideration. In this work, the co-transport of illite colloids (IC) and Eu(III) in the quartz sand and iron-coated sand porous media was investigated by column experiments to address the predominant mechanism of charge properties on co-transport. Results showed that Eu(III) transport was driven by the illite colloids and electrostatic interaction was critical in governing the co-transport patterns. The promotion of Eu(III) transport by IC was attenuated in the iron-coated sand systems; more IC-Eu(III) complexes were retained uniformly in the column. The pore throat shrinkage caused by electrostatic attachment between aggregated IC and iron oxides exacerbated the physical straining and size exclusion effect of IC-Eu(III) complexes. An aggravated irreversible retention of IC-Eu(III) was detected in iron-coated sand column due to the electrostatic attraction of IC-Eu(III) to host media. The findings are essential for improving the understanding on the potential transport, retention and release risk of colloids associated radionuclides, and imply that the positively charged permeable reactive barrier is an effective strategy to reduce the transport risk of colloid associated radionuclides.     

Lab-on-chip methodologies for the study of transport in porous media: energy applications

We present a lab-on-chip approach to the study of multiphase transport in porous media. The applicability of microfluidics to biological and chemical analysis has motivated much development in lab-on-chip methodologies. Several of these methodologies are also well suited to the study of transport in porous media. We demonstrate the application of rapid prototyping of microfluidic networks with approximately 5000 channels, controllable wettability, and fluorescence-based analysis to the study of multiphase transport phenomena in porous media. The method is applied to measure the influence of wettability relative to network regularity, and to differentiate initial percolation patterns from active flow paths. Transport phenomena in porous media are of critical importance to many fields and particularly in many energy-related applications including liquid water transport in fuel cells, oil recovery, and CO(2) sequestration.     

Effect of surfactants on the porous structure of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogels prepared by an emulsion templating method

Stimuli-sensitive porous hydrogels prepared with an emulsion templating method developed by the authors are potentially applicable in the medical and pharmaceutical fields; thermosensitive N-isopropylacrylamide (NIPA) hydrogels having randomly distributed sphere-like cavities have been prepared by the polymerization in an aqueous phase in an oil-in-water (O/W) emulsion, followed by the washing of oil (oleyl alcohol) microdroplets. The surfactant plays a dominant role in the preparation of porous hydrogels and the pore size. This study concerns with the surfactant effects on the stability of pre-gel O/W emulsions. The porous NIPA hydrogels were successfully prepared using the surfactants forming the stable emulsion and their internal structures and swelling properties were characterized. The O/W emulsions and the porous hydrogels prepared using various amounts of oil and surfactant were characterized. The information obtained serves for preparation of porous hydrogels having suitable porous structure for their applications.     

Spatio-temporal anomalous diffusion in heterogeneous media by nuclear magnetic resonance

In this paper, we describe nuclear magnetic resonance measurements of water diffusion in highly confined and heterogeneous colloidal systems using an anomalous diffusion model. For the first time, temporal and spatial fractional exponents, α and μ, introduced within the framework of continuous time random walk, are simultaneously measured by pulsed gradient spin-echo NMR technique in samples of micro-beads dispersed in aqueous solution. In order to mimic media with low and high level of disorder, mono-dispersed and poly-dispersed samples are used. We find that the exponent α depends on the disorder degree of the system. Conversely, the exponent μ depends on both bead sizes and magnetic susceptibility differences within samples. The new procedure proposed here may be a useful tool to probe porous materials and microstructural features of biological tissue.     

The analysis of emulsion structure changes during flow through porous structure

The aspects of emulsion flow through porous media are crucial for many industrial processes, especially in the development of Enhanced Oil Recovery (EOR) techniques and also during oily wastewater purification. In this paper we investigated the hydrodynamics of gravitational flow of emulsions with inner phase of different concentrations. We also tried to determine the quantitative changes in the droplet diameter distribution and concentration of emulsion flowing out of the bed. On the basis of experimental data, it was possible to describe the influence of emulsion concentration on the hydrodynamics process and to characterize the changes of the structure of emulsion.     

Measuring the diffusion of noble gases through a porous medium using prompt gamma activation analysis

Detection of anthropogenic noble gas isotopes in the atmosphere is an important indication that a below ground nuclear-test has taken place. Diffusion plays a critical role in the transport of these gases through the geological media to the surface where they can be detected. Better techniques are need with which to study the diffusion of noble gases through porous systems. Here we demonstrate the suitability of using prompt gamma activation analysis to measure the time dependent concentration of argon as a result of its diffusion through a porous medium that is saturated with nitrogen at atmospheric pressure. The experiments were conducted in a 1 m long tube, 10 cm diameter, and packed with fine SiO₂ sand. Prompt gamma activation analysis was used to measure the concentration of argon within the experimental system as a function of time.     

Preparation and characterization of brushite crystals using high internal phase emulsion

Various morphologies of brushite crystals were successfully synthesized using oil-in-water high internal phase emulsion stabilized by surfactants with various polyoxyethylene chain lengths for the first time. Rheological measurements had proven that such emulsion was a highly stable reaction media for the synthesis of particulate and porous brushite crystals. Rheological properties of the emulsion with and without the presence of crystal growth were compared and discussed. Morphologies of brushite crystals comprised of leafletlike particles to continuous dendritic network structure which gave rise to porosity in submicron size with increasing polyoxyethylene chain length. The mechanism leading to the various types of morphologies produced is discussed schematically based on small angle X-ray scattering results.     

In silico rationalization of the structural and physicochemical requirements for photobiological activity in angelicine derivatives and their heteroanalogues

In PUVA (Psoralen plus UVA) chemotherapy 8-methoxypsoralen is the most widely used compound, although its efficacy is endowed with undesired side effects. In order to have an evident anti-proliferative activity with a reduced phototoxicity, many linear and angular derivatives have been synthesised. In this paper we describe a QSAR study in which, by means of the neural networks methodology, a useful model for predicting biological activity, expressed as ID₅₀ (the UVA dose that reduces to 50% the DNA synthesis in Ehrlich cells), has been derived. A decision tree that is able to discriminate between active and inactive compounds has been built based on recursive partitioning. The study shows the key structural features responsible for the activity and could be a helpful tool in the rational design of new, less toxic, photochemotherapeuthic agents.     

聚合物互通多孔材料的乳液模板法制备及其功能化研究*

本文对近年来利用乳液模板制备聚合物互通多孔材料的研究进行了综述,主要介绍以高内相乳液模板制备互通多孔聚合物整体柱和利用双重乳液 (或称多重乳液) 制备多孔或多空聚合物微球的进展;分析目前多孔聚合物材料研究中存在的问题及其研究动态;讨论合成多孔聚合物材料的性能缺陷及其表面功能化改性的相关研究;并对聚合物互通多孔材料潜在的应用和研究前景进行了展望。     

Theoretical estimation of redox potential of biological quinone cofactors

Redox potentials are essential to understand biological cofactor reactivity and to predict their behavior in biological media. Experimental determination of redox potential in biological system is often difficult due to complexity of biological media but computational approaches can be used to estimate them. Nevertheless, the quality of the computational methodology remains a key issue to validate the results. Instead of looking to the best absolute results, we present here the calibration of theoretical redox potential for quinone derivatives in water coupling QM + MM or QM/MM scheme. Our approach allows using low computational cost theoretical level, ideal for long simulations in biological systems, and determination of the uncertainties linked to the calculations. © 2017 Wiley Periodicals, Inc.     

Emulsion particle size in porous media and its effect on the displacement efficiency

The emulsification process in reservoirs was simulated using core displacement experiments. Emulsions with different particle sizes were prepared using different permeability cores, and the different emulsion particle sizes formed using different permeability cores were studied. The emulsion particle size was graded against the core throat diameter, and the displacement efficiency of the different particle size emulsions was studied. The displacement mechanism of the emulsion was analyzed. The results indicated that the emulsion is mostly pore-throat scale formed in the porous media, with a particle size distribution similar to that of the core throat diameter, and the emulsion particle size increases with the increase of core permeability. The recovery percentage of emulsion flooding is greater when the matching ability of the emulsion was favorable, it is 17.07% when the matching factor is 1.08. The pore-throat scale emulsion can block high permeability zones and expand sweep volume. Moreover, due to deformation of the emulsion, the elastic stress can make the residual oil migrate forward and improve the efficiency of oil displacement.     

Polydispersed O/W emulsions in porous media: segregation at low-tension conditions

The segregation of polydispersed oil was studied in theoretical models, sand packs, and plugs from consolidated cores at low tension and atmospheric conditions. The height of the oil belt formed at the top of the porous column and its change in time were measured. The analysis of the segregation curves indicates the subsequent appearance and rise of three pseudo-phases. The primary phase, which contains the dominant fraction of oil in the system, rises with a relatively high steady state velocity. Unsteady state and decreasing velocity characterize the transitional secondary phase which is a lean emulsion left behind. The ternary phase, which follows it with a semi-steady state low velocity, is a lean emulsion of the smallest oil blobs present in low concentration. The process terminates at the segregation of the mobile oil particles in the subsequent phases where a small fraction of the total oil content remains in the porous bed, mainly from the last stage of segregation due to the entrapment in suitable microstructures. According to the postulated mechanism, the decreasing probability of the repeated coalescence in pore bodies and dispersion at the connecting pore throats are responsible for the development of the mobile phases at the sufficiently low-tension conditions. The structure of the pore network, the size-distribution of the oil droplets, the density of their population, and the length of paths affect the mechanism, properties, and behaviour of the systems.     

Synthesis of Anisotropic Hydrogels and Their Applications

Owing to their water‐rich structures, which are similar to those of biological tissues, hydrogels have long been regarded as promising scaffolds for artificial tissues and organs. However, in terms of the structural anisotropy, most synthetic hydrogels are substantially different from biological systems. Synthetic hydrogels are usually composed of randomly oriented three‐dimensional polymer networks whereas biological systems adopt anisotropic structures with hierarchically integrated building units. Such anisotropic structures often play essential roles in biological systems to exhibit particular functions. In this context, anisotropic hydrogels provide an entry point for exploring biomimetic applications of hydrogels. Reflecting these aspects, an increasing number of studies on anisotropic hydrogels have been reported recently. This Minireview highlights the use and perspectives of these anisotropic hydrogels, particularly focusing on their preparation, structures, and applications.     

Influence of spectral and angular sensitivity on the readout of biological dosimeters

Biological systems used as biological dosimeters can possess different angular sensitivities from the detectors usually used in physical devices. A simple experimental setup has been developed and used to measure the angular sensitivity of uracil thin-layer biological dosimeters. Results of angular sensitivity measurements for uracil thin-layer dosimeters are presented using a Xe arc lamp as the UV source. According to the experiments described here, uracil thin-layer dosimeters show a cosine-type angular dependence. In several indoor experiments broadband UV meters are used to control the applied dose rate from a given artificial UV source. The experimental setup has been designed and used to verify experimentally the importance of spectral and angular sensitivity differences of biological and physical UV meters applied in biological experiments. Model calculations for two different irradiation systems, using different geometrical arrangements of artificial UV sources, are also presented. For these arrangements relative dose rates that could be measured with dosimeters of arbitrary spectral, but different angular sensitivity have been calculated.     

Hierarchical porous materials made by drying complex suspensions

Porous structures containing pores at different length scales are often encountered in nature and are important in many applications. While several processing routes have been demonstrated to create such hierarchical porous materials, most methods either require chemical gelation reactions or do not allow for the desired control of pore sizes over multiple length scales. We describe a versatile and simple approach to produce tailor-made hierarchical porous materials that relies solely on the process of drying. Our results show that simple drying of a complex suspension can lead to the self-assembly of droplets, colloidal particles and molecular species into unique 3D hierarchical porous structures. Using a microfluidic device to produce monodisperse templating droplets of tunable size, we prepared materials with up to three levels of hierarchy exhibiting monodisperse pores ranging from 10 nm to 800 μm. While the size of macropores obtained after drying is determined by the size of initial droplets, the interconnectivity between macropores is strongly affected by the type of droplet stabilizer (surfactants or particles). This simple route can be used to prepare porous materials of many chemical compositions and has great potential for creating artificial porous structures that capture some of the exquisite hierarchical features of porous biological materials.     

Colloid filtration theory and the Happel sphere-in-cell model revisited with direct numerical simulation of colloids

The transport of colloids and bacterial cells through saturated porous media is a complex phenomenon involving many interrelated processes that are often treated via application of classical colloid filtration theory (CFT). This paper presents a numerical investigation of CFT from the Lagrangian perspective, to evaluate the role of some of the classical assumptions underlying the theory and to demonstrate a means to include processes relevant to bacterial transport that were inadequately characterized or neglected in the original formulation, including Brownian diffusion and potentially hysteretic potential functions. The methodology is based on conducting a Lagrangian trajectory analysis within Happel's sphere-in-cell porous media model to obtain the collection efficiency (eta), the frequency at which colloids or bacteria make contact with the solid phase of the porous medium. The Lagrangian framework of our model lends itself to mechanistic modeling of the biological processes that may be important in subsurface bacterial transport. The numerical study presented here focuses on the size range of bacterial colloids and smaller (down to 10 nm). Results of our model runs are in good agreement with the deterministic trajectory analysis of Rajagopalan and Tien (when diffusion is neglected) and in excellent agreement with the analytical solution to the Smoluchowski-Levich approximation of the convective-diffusion equation (when external forces and interception are neglected). Simple addition of our result for the deterministic eta to our result for the Smoluchowski-Levich eta matches the overall Rajagopalan and Tien eta to within 5% error or less for all cases studied. When we simulate diffusion and the deterministic forces together, our results diverge from the Rajagopalan and Tien eta as the particle size decreases, with discrepancies as large as 73%. These results suggest that accurate prediction of eta values for bacteria-sized (and all submicrometer) colloids requires simultaneous consideration of the primary transport mechanisms.